Authorization On warehouse Level

Dear Experts,
I want to give the authorization at the warehouse level. We are have having different warehouse at different location. I want that user can see the stock only their warehouse instead of all the warehouse.
Thanks in Advance.
Regards,
Ravindera

Hi,
There is no authorization per warehouse. Yet there is a user defaults in the user setup form --> default.
You csn check it.
JimM

Similar Messages

How can I disable POST GOODS RECEIPT button in transactions VL31N/VL32N via Authorization or Role Level.

How can I disable POST GOODS RECEIPT button in transactions VL31N/VL32N via Authorization or Role Level, There is a requirement from my client and i propose two methode
1- Creation of Ztcode ZVL32N and do changes ABAP program level
2- Disablement via Authorization/Role level - but how can i find the auth object/ Authorization corresponds to POST GOODS RECEIPT button in VL32N

I think you can make use of SHD0 - Transaction variant to achieve this. You can make it as grayed out while recording steps in SHD0.

Restrict Authorization at Material level during production confirmation

Hi SAP Gurus,
I would like to ask if its possible to restrict authorization at Material Level during production confirmation.
Our scenario is we have SFG and FG which are handled by different group of people but it has the same Order Type. Now we want to restrict authorization such as one department can only confirm SFG and the other department can confirm FG only.
Is it possible to set authorization at material type or production scheduler level. IF not possible, is there other way except creation of new Order Type?
Thanks,
Raymond

Hi Raymond,
DO you mean I should create a customized table for this?
Yes
Are there no standard way?
As per my knowledge, you can control through production order type, so you need to create seprate order type for this
Thanks,
Sankaran

Itemcost column table at warehouse level in item master

I have an issues regarding the item cost in Item master --> Inventory Data tab when we select Valuation method either Standard or Moving average we can see the itemcost (Column) value at warehouse level but for FIFO method we cant see the itemcost column.
Can any one tell me in which table the itemcost value is stored for FIFO method.? I can see the itemcost of a FIFO valuation method only when i do issue for production there i will get item cost but i want to know the itemcost value at production order level only for FIFO method because based upon the itemcost only my process cost is calculated.

Dear Pavan,
The Item Cost column is not shown in the Item Master Data for items using FIFO Valuation Method. This is because a FIFO cost layer is created as Items are received to stock. Hence, it is possible that for one warehouse, several FIFO layers exist (depending on the different FIFO cost).
You can also see this information in the Stock Posting List.
I hope the above helps.
Regards,
Lorna

PM Organization Units Authorization on User Level

Hello experts,
Is there a way to add authorization for an organization unit (i.e. Planning Plant) on a user (SU01) level and not on a authorization objects (PFCG) level?
For example,
I would like to create the following Role (profile):
ZPM_AUT_EQM_EQUIPMENT_DISPLAY
This role should be able to display equipment from the Plant Maintenance module.
However our problem is, we would like to create authorization levels with organizational units for each user:
For example:
User jsmith has ZPM_AUT_EQM_EQUIPMENT_DISPLAY assigned but can only display equipment from Planning Plant SL01.
We know we can create this authorization creating several roles, like:
ZPM_AUT_EQM_EQUIPMENT_DISPLAY_SL01
ZPM_AUT_EQM_EQUIPMENT_DISPLAY_SJ01
ZPM_AUT_EQM_EQUIPMENT_DISPLAY_AG01
but our idea is not create several roles, but to assign the Planning Plant authorization on a user level and leave just one role so we would only need ZPM_AUT_EQM_EQUIPMENT_DISPLAY.
Is there a way to do this?
Thank you in advanced for your replies.
Best regards,
Fernando Montenegro

Hi ,
Could you share about your solution ? I think I have face the same problem as yours.

Organization Units Authorization on user level

Hello experts,
Is there a way to add authorization for an organization unit (i.e. Company Code) on a user (SU01) level and not on a authorization objects (PFCG) level?
For example,
I would like to create the following Role (profile):
ZFI_AP_REPORT_DISPLAY
This role should be able to display AP report from the Financial module.
However our problem is, we would like to create authorization levels with organizational units for each user:
For example:
User Anson has ZFI_AP_REPORT_DISPLAY assigned but can only display Report from Company Code 3202.
We know we can create this authorization creating several roles, like:
ZFI_AP_REPORT_DISPLAY_3201
ZFI_AP_REPORT_DISPLAY _3202
ZFI_AP_REPORT_DISPLAY_3203
but our idea is not create several roles, but to assign the Company Code authorization on a user level and leave just one role so we would only need ZFI_AP_REPORT_DISPLAY.
Is there a way to do this?
Thank you in advanced for your replies.
Christine Tseng

I agree with Jurjen. There is no point creating a "new" authorisation concept for a few transactions. If you use standard authorisation objects for the check in your custom tcodes then you will likely have very little work to do if you assign those tcodes to existing roles.
Even using a custom auth object & creating the variants will take up no more time than doing something like repeating the variable functionality in BI or messing about with PIDs in the UMR (which I definitely do not recommend). By sticking with the standard concept you ensure consistency, making it much easier to support and/or handover if you move on from the role.

Edit Authorization at Entity Level

Problem: I am trying to Edit Authorization at entity level but my changes are not getting saved.
Discription:
I have use case that I want to make an entity read only for a role defined in my jazn.
To do so, I am opening my entity, and in struture window...on right clicking the entity name I get this option to Edit Authorization.
On Edit Authorization window, I get name of all the roles listed and options to select Read, Update and Delete in from of each Role.
When I select "Read" for the role I want only read access and close this Edit Authorization window...my changes are not getting saved.
Does anyone know why this is happening? Or any other way I can restrict users of a specific role to change the data for an entity.
Thanks
Vikas Kumar

Hi,
not sure what you mean by "changes are not saved". Are you saying they are physically not saved in that they don't show in the jazn-data.xml file ? If so, then this sounds odd and you should file a bug. If it is only that authorization is not enforced,have a look at this video as authorization on entities is a two step task
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/AdfSecurity/AdfSecurity.html
Frank

MRP at Warehouse Level

Dear Experts,
Currently we are enhancing our system to utilize MRP function. Since our warehouses are scattered to many location, then it is too difficult for us to do material planning in manual method. Our requirement is to carry out material planning at warehouse level, that is way, I tried to promote MRP area. I have activated MRP area storage location because our warehouses are represented by storage location and assigned them to each material master data.
Sales Order created and assigned the BOM to CS61, and subsequently MRP run MD01 or MD02 as result there is no BOM explosion for my FG. However when I remove the assigned MRP are in Material Master data it is working. My expectation the BOM explosion should be happened at MRP area level. Your advices are appreciated. thanks
Best regards
Mahnansa

Hi,
You said you are creating Sales Order and then creating th Order BOM in CS61, then I assume that you are using MTO strategy. If so you can run the MRP in T code : MD50 against the Sales Order Item.
As you said you are running the MRP in MD01 / MD02 , One point I would like to Highlight- Did you create the Scope of Planning in COnfiguration under which you have Added all the MRP areas.
Also check whether you have assigned the MRP areas to a Plant. If not system will not explode the BOM and trigger the dep reqts and procurment proposals.
Hope this will help.
regards
radhak mk

SAP tables for stocks at warehouse level

Hi
Can anyone let me know which are tables for the stocks which are maintained at the warehouse level.
sunil

LQUA

Block/Discontinue an article at warehouse level

Hi SAP Experts,
I want to know how can I block or discontinue an article at warehouse level. By mistake , I extended an article to warehouse view in AP Retail . I do not want to block or discontinue the article for site/plant level because still the transactions are carried at plant level. I cannot try MM06 as it does not exist for Retail specefic domain.
Regards.
Sumi

Hi Frenchy,
I tried blocking by LS07 but it showed the error" No data vailable for criteria specified". I had given the article no, the warehouse no. and the site no. and also checked the Putaway block.
Is it showing because there are zero quantity in the warehouse when i checken in MLGN table.
No transfer orders have been raised for this article for ths warehouse no. yet.
But i want to block this warehouse for future purpose as I had extended this to a wrong warehouse by mistake.
Pleaseadvice Frenchy. Another thing,, I cannot use MM06 as we use Retail specefic application where this transaction cannot be used.
Regards.
Sumi

Authorization at domain level

Hi all ,
I have a requirement wherein I have a put an authorization at domain level.
The authorization group and object have been created.
How to find the exit where i can use thse objects for the domain.
Domain is BANKN .
Pls help .
Thanks
Supriya

Hi all ,
I have a requirement wherein I have a put an authorization at domain level.
The authorization group and object have been created.
now i need to put an auth check for all the transactions that use this domain ...
For eg in FK03 , enter ant vendor and company code , go to 'DISPLAY VENDOR : PAYMENT TRANSACTIOn' . if that user is auth then he should be able to see the bank acc number ellse 'XXXXXXXXXX' ...
This is the scenario .
How to find the exit where i can use thse objects for the domain.
Domain is BANKN .
Pls help .
Thanks
Supriya

DIR Authorization by Organizational Level

Hi fellows!
I would like to know if it is possible restrict access of DIR by organizational levels?
Example: I need that if User A from plant 1234, creates a DIR type AAA number 0001, the User B from plant 4567 shouldn't have to access this DIR type AAA number 0001. I want that the users only can access the DIRs created by the plant which they have access.
In the master roles of DMS I didn't find any object to help me in this scenario. I dont want to use the ACL to restrict the access of the documents. I want that this restriction has to be done by authorizations rules as in other areas.
Can someone help me with some idea or case about this?
Best Regards!
Daniel
Edited by: D Quintal on Nov 25, 2010 5:43 PM

Hi Daniel,
Its quite possible to achieve your requirement.
There is a field called 'Authorization group' in a DIR if you have observed.This enables you to restrict authorization at Document level in addition to authorizations at Document Type and Status level.Suggest you create Authorization Groups like Plant1234,Plant4567 and so on with the help of your ABAPer.Now assign the required users to these Authorization groups.
Once implemented,whenever a DIR is created and specific Authorization group is assigned, only those users part of this Authorization group will be able to process/access this DIR.Hope this addresses your requirement.
For details on implementing Authorization group in DMS,refer link,
http://wiki.sdn.sap.com/wiki/display/PLM/UsingAuthorizationGroupfieldin+DMS
Regards,
Pradeepkumar Haragoldavar

AUTHORIZATION ISSUE: cube level data restriction in BI

Hi all,
I have few cubes and ODS which are containing data. The requirement is to restrict the cube level data.
Eg : we have option to see the cube data in RSA1( ADMIN WORKBENCH).Right click on cube manage data.
the requirement is to restrict to see the data company code = 111(only)
Likewise for few users only company code = 222.
If they try to see other than 111, they should get u201Cno authorization messageu201D.
Cube data
company code         distribution channel         account     amount
111                         10                                   10002     100
222                        20                                      10002     200
333                        30                                       10002     300
444                        10                                      10002     400
1111                20                                       10002     500
1111                30                                      10002     600
2222               30                                           10002     700
Thanks in advance.
Jo

Hi MaikI,
Thank for the inputs.
Actually i want restrict the data based on the ANALYSIS AUTHORIZATION - 0TCAIPROV.
I want to give s_rs_comp-provider value *, and i want to control the query (data) access through analysis authorization. i want to create zanalysisauth which contains 0TCAIPROV = $variable.
variable is populated with one/two provider values at runtime .
based on the runtime variable population user should get access.
But with this implementation user is able to open all queries.where i am going wrong? how can i do this?
Regards,
Joseph

Project authorization at task level for a user

Dear friends,
I have created one project called TEST in solution manager. I am have assigned standard ASAP methodology as a road map for that project. I wants to restrict my user to do business blueprinting only for particular business process. I wants to restrict him to access other processes related to the same project.
How to restrict authorization in individual task level (lower level) in solution manager for an user or team member?
How is it possible?
Thanks
Senthil

Hi Arkadiy,
I wants to maintain dependency for my project execution. Let me explain in detail.
My project name is TEST, it follows ASAP methodology, contains five phases namely,
1. Project preparation
2. Business Blueprint
3.Realization
4. Final Preparation
5. Golive & support
In each phase, some specific tasks to be completed.
Let us consider, in Project preparation phase, i am having tasks of following:
A. Define Project scope
B. Define Project Plan
C. Define project team members
D. Project charter sign off
My question is:
without completing( means status should be "Complete") Project scope (Task "A"), the system should NOT allow the team member to jump into next task ( Define Project plan). Like that i wants to maintain dependency for individual each task.
Is it possible?
Your answer will be very much appreciated.
Thanks
Senthil

Information Broadcasting Authorization at Query Level

Hi,
I would like to know, is there any way to authorized a user at query level in information broadcasting?
For example, there are three plant P1,P2 and P3 showing in Query, now i want to broadcast this query to E-mail to two user U1 and U2 in following manner.
1.) User U1 get only Plant P1 Data.
2.) User U2 get only Plant P2 Data.

Yes, you can do that. For that;
Plant should be authorization relevant info object
(ii) you must have roles to give access to users at Plant level
(iii) Users U1 and U2 must be SAP user IDs and should have required role for Plant access
(iv) Query to be broadcasted must have auhtorization variable for Plant
Once the basic setup is ready, you can test it by executing the report for individual users U1 and U2 and they should see data only for respective Plants.
Now in the broadcasting setting, specify the users U1 and U2 in User box seperated by semi-colon and tick the checkbox "User Specific" - this will make sure that data is executed as per the data aurthoziation and also format will be selected as per the user profile (date format etc).
If U1 and U2 are not the SAP users, you will have give their email addresses and will have to create two different broadcast settings to send data for selection plants.
I hope it helps.
Regards,
Gaurav

Authorization On warehouse Level

Similar Messages

Maybe you are looking for