Authorization Problem in Integrated Planning

Hello Guys,
When giving authorization to users we are encountering this error message
Errors while executing sequence
Planning function () ended with errors
You are not authorized to read the data
I already Assigned
- Planning: Aggregation Level
- BI Analysis Authorizations in Role
- Business Explorer - Components
- Data Warehousing Workbench - InfoCube
- Lock Settings
- Planning Function
- Planning Sequence
and still gettng that error message do I missed something?
I even assigned * to all of that but still getting the error message

Hello,
Check st01 and su53 for missing objects then assign objects accordingly in the role or in analyse authorisation .
Thanks.
With regards,
Anand Kumar

Similar Messages

Problem with Integrated Planning / NW2004s Sneak Preview

Has anyone successfully started the planning modeler of the integrated planning in NW2004s?
I installed the ABAP Edition of NW2004s Sneak Preview (NSP) and after that the Slim Java Edition (J2E). When starting the planning modeler I get the error message "Cannot find J2EE Engine" although the J2E-System is running according to the management console.
I suggest that you need to modify some of the parameters of the ICM. Has anyone some infos how to do that?
Thanks for your replies
Thorsten

Hi Thor,
as raja mentioned you need NW04s Java engine to integrate with NW04s ABAP sneak preview.Right now it is not available for download in SDN and service market place. it is still under ramp up and only available to SAP internal.
Thanks
Sarath.

Problems with Integrated Planning

Hi Guys
I've managed to set up a input-ready query and in planning modeler wizard I've done the following:
Created aggregation levels on a real time cube
Selected a filter
Tested the layout.
When accessing the input ready query, I can't actually save the data? What am I doing wrong. When changing data and saving data, it just reverts to the old data.
Wouter

This is going back a little but I think you did not use all the infoobjects in the aggregation level in the query.
When that happens, the layout / input enabled Bex queries would not save since it is at a more aggregated level than the aggregation level.
Hope this helps,
Mary

Errors with Integrated Planning authorizations

Dear experts,
We are working with Integration Planning, and when we try to create or
modify whatever object (by the modeler or the wizard) we receive an error message like this:
"You have no authorization for Multiprovider XXXX"
Not only Multiprovider, but InfoCube....whatever object.
The curious thing is that we have with the user we are working a SAP ALL.
With the T-CODE bps0 we can do everything, but with T-CODE rsplan is
impossible.
Weve checked in the T-CODE su53 and everything is OK.
Weve checked in the T-CODE rsecadmin and nothing there.
Weve checked as well in the T-CODE st01, followed the actions with the
trace and all the return codes are 0.
Does anyone know what happens?
Thanks in advance
Cecilia

Hello Cecilia,
if you keep a carott in front of a donkey he will run faster... this is the same what I mean if I talked from experts: Men like to be the hero and instead of carott you need to need to laud him as an expert, he will reply faster
Lets come back to authorization: I am not sure whether RSECADMIN is a newer version of RSSM. Reason: In RSSM you can activate authorization check for a cube or MP but in RSECADMIN you administrate authorization for an user.
I am not sure, but I think that your problem is related to this issue. If not, there are very strange problems with the web authroization, its true: What we have done is to copy an exisiting BW user and assign him the same authorization like in web. Reason: To create a new user in the web does not work in all cases. We had very much problems with SP7, since we have SP10 we dont have those problems.
regards
Eckhard

Problem in Load File into BI-Integrated Planning

<b>Hi Marc,
When I am running the URL for file upload in BI Integrated Planning, I am getting the below message ( we have created the variable on navigational attribute):</b>
Note
The following error text was processed in the system BWD : /BI0/OICOSTCENTER__0SALES_DIST is not a valid attribute type.
The error occurred on the application server ma1ua231_BWD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE_INFO~ADD_ATTRIBUTE of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: WDDOMODIFYVIEW of program /1BCWDY/780RZKQ35587UCX2RCTU==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/780RZKQ35587UCX2RCTU==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
<b>In System we are getting Short dump as:</b>
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and therefore caused a runtime error.
The reason for the exception is:
/BI0/OICOSTCENTER__0SALES_DIST is not a valid attribute type.
I went through your blog. Just curious to know when can we expect Version 2 of the how-to solution will support a direct upload from Excel without the need to launch a browser.
Thanks
Kamlesh Mishra

Hi Marc,
Thanks for your support and great help for the problems we are facing in IP. Now we are able to get the browser screen for selecting the file, but we are facing new issue, When we are uploading file, the system is giving dump saying "THE ASSERT CONDITION was violated" in the below source code:
LOOP AT n_t_charsel INTO l_s_charsel WHERE sign = 'I' AND opt = 'EQ'.
ASSIGN COMPONENT l_s_charsel-iobjnm OF STRUCTURE <l_s_data> TO <f>.
ASSERT sy-subrc = 0.
IF <f> IS INITIAL.
    <f> = l_s_charsel-low.
ENDIF.
ENDLOOP.
(We are unable to open the Blog, it is showing us "No Authorization" message)
Thanks,
Kams

Problems with HowTo "Creation of BI Master Data in Integrated Planning...)

Hi,
one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
Does anyone of you know this guide and was able to build a working solution?
I have different questions, maybe you could help me:
- what kind of variable is he using?
- do I need a DataProvider in Web Template?
- how do I get the connection to the used variable in the button group?
Thanks for your help.
Regards
Tim

Hi Timo,
you require two howtos to implement the solution.
First, please take a look at the first document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
And after this please implement the solution from the how to.
Furthermore you can take a look at this how to, which might help you too:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
Hope this helps.
Regards
Tim

Problem to maintain the Comments in BW 7.3 Integrated Planning

Dear All,
Can anybody please guide me to complete the " Flexible Comment Solution for BEx Applications." As I am working on BW7.3 SP8
and was gone through the documents " How to Flexibly Change Characteristic Values and Comments in BI Integrated Planning" and "How To Build a Fast and Flexible Comment Solution for BEx Web Applications".
But unfortunately, I did'nt got any result from these two documents.
How To Build a Fast and Flexible Comment Solution for BEx Web Applications
How to Flexibly Change Characteristic Values and Comments in BI Integrated Planning
Thanks in Advance,
Krishna Chaitanya.

Hi Suman,
The exact issue is after entering comments and it is stored in Buffer and unable to retrieve / displayed
in the layout. This is what I am facing problem and tried with all the steps mentioned from the document How to Flexibly Change Characteristic Values and Comments in BI Integrated Planning.
Apart from the above, I tried with another document How To Build a Fast and Flexible Comment Solution for BEx Web Applications and here after entering the comment and want to save the comment in a particular row using REPOST function, stating the error that Characteristic comments has no master data for "test". test is my comment.
Hope you understood.
Regards,
Krishna Chaitanya.

Problems with BI Integrated Planning

Hello, everybody,
We installed BI 7.0 and want to use BI Integrated Planning, but then i connect to Modeler Wizard i get error <b>No JCO Connection</b>. Our BASIS Team can't find an issue.
Maybe there is some kind of configuration in BI side, not just in BASIS?
Could you give us some advice?
Thanks in advance.
Best Regards,
Arunas Stonys

Joanne,
Are you still having issues with BI-IP? I have been troubleshooting with the basis folks in getting BI-IP up on a new system over the last few day to a week and have now gone through the process myself whereas before I had been given a system already set up. I have enclosed some troubleshooting feedback with my counterpart in getting the system up.
What type of issue are you having?
Can the basis folks start the planning modeler or planning wizard in RSPLAN even if you can't?
1. The note mentioned above 919850 and the help documentation in SPRO under
SAP NETWEAVER->Business Intelligence->BI Integrated Planning
are very helpful. They have to set the following Jco Destinations in Web Dynpro Content Administrator:
BI_MODELDATA
BI_METADATA
WD_ALV_MODELDATA_DEST
WD_ALV_METADATA_DEST
And the problem was the connection to the message server. It was not possible to connect without having a Logon group assigned. This had to be done in WI4 ABAP as well as in the SLD for this system. After that assignment connection was no problem.
2. make sure you have the portal ips in your host file.
3. have they have created an account for you in client 001 of the NW04S?
4. Have they created a portal id for you and assign the portal role com.sap.ip.bi.business_planning_showcase to you?
5. have they configured the setting for starting the planning modeler (also under SPRO)..
Hope this helps. If you have more specific questions, feel free to e-mail me directly.
Mary

Integrated Planning and Non-cumulative key figure

Hi
I´m creating an Integrated Planning application and a problem has occurred. The users want to plan on inflow and outflow and at the same time have a row with the total sum in the same layout (they are planning on 0CALMONTH and 0ORGUNIT) This can e.g. be solved through use Web Application Designer with one planning query and one traditional query.
Any way. I have created a non-cumulative key figure with an inflow- and an outflow key figure. The problem is that the non-cumulative key figure starts working first when I change the planning mode from plan status to load status. I could use function modules, to change the status, behind the save button but there are several users who are planning at the same cube at the same time and I don´t want to lock the others from planning.
How to solve this?
- Is it possible to restrict the switching, from plan to load, by setting some kind of filter at the users org.unit? (0ORGUNIT is an authorization object)
- Is it possible to create a process chain and then load the data to another cube for reporting at just this key figure? And also here have a filter at the org.unit
I will gladly get all kind of idea and input to solve this problem. Maybe there is some other way to go than using non-cumulative key figureu2026

Thanks for your answers
I have tried different scenarios and I will use a u201Dsave-buttonu201D. In the save-button I use the commands SAVE_DATA and EXECUTE_PROCESS_CHAIN. The command u201CEXECUTE_PROCESS_CHAIN starts a process chain that switches from plan mode to load mode and then back to plan mode again.
One new problem has arisen. The non-cumulative key figure is updating if an existing value (inflow- or outflow) is changed. But if an input is made to an empty cell, without value, nothing happen when I press on the start-button. BUT if I refresh the browser the non-cumulative value is updated!!!
Is there any command in WAD that refresh the whole page? If so I can include it in my start-button.
If not, any sugestion on how to solve the problem?
Best regards
Mikael

Questions about Integrated Planning and BPS

Hi all,
I'm testing the functions of BW7.0. And at the point of comparing the new BI Integrated Planning from the BPS, I'm stuck with 3 problems. Can anybody give me some solution?
<b>i.</b> When using the input-ready layout of the BW-BPS 3.5, I was able to create a new record and load it up to the cube. Is it possible to make the same operation like this using the BI Integrated Planning of BW7.0?
<b>ii.</b> When using the BW-BPS 3.5, showing the character hierarchy on the Manual planning layout can be chosen. And I'd like to show the BPS Characteristic Hierarchies in BI Integrated Planning of BW7.0 like it is in the BW-BPS 3.5. Is it possible to show the hierarchy in similar type somehow? If not,can't I show the sum of it anyhow? And if possible,can you also show the sum of the each hierarchy and change the data?
<b>iii.</b> When showing the Characteristic combination data, can you choose how to show them from the transaction data or from all the combination like it was possible in the BW-BPS 3.5?
Kind regards,
Hiroshi Iwanaga

Dear Beat,
Thanks for your help.
The information you gave me made a lot of help.
Can I ask you more about the first question?
About getting new lines in the table web item,as you have told me, I have set the parameter NEW_LINES_COUNT as 20 in the table web item. But when I execute it,no lines shows up. Is this a program error or am I setting the parameter in a wrong place?
And this getting new lines feature, is it also possible when using a workbook?
Thanks in advance,
Hiroshi Iwanaga

Authorization Error in Integration Repository

Hi,
I have authorization issues with Integration Repository(IR) in XI 7.0 Server. While logging into IR, i use the PISUPER id which works fine. But if i use other id it throws authorization error.
I am using client 710 and have created an id with relevant roles to login to IR which failed. Then i created same id on 001 client and could logon to IR with that id. This means that while logging into IR, it points to 001 client and not 710 that i am using. Thus i need to use 2 different ids: one for IR that points 001 client and other for logging into SAP system on 710 client.
I referred the below thread which tells the same.
Authorization Error
Can someone explain me about this.
Also can i use the same id for logging to IR and SAP system?
Regards,
Chintan Sheth

Hi,
Thanks for replying.
Yes i know that users and roles are client dependent. But my problem is different.
I hav created a new client 710 which is copy of 001 client and also performed the post steps as per SAP Note 940309.
The problem i face is while logging to Integration Repository. I have id PISUPER on both the clients 001 and 710. But for logging to IR it accepts the logon credentials of 001 client and not of client 710. I understood this when i changed the password of PISUPER on client 710.
As per my knowledge, for logging to IR it should use the user master record of client 710.
Kindly help me on this.
Regards,
Chintan Sheth

Authentication and Authorization Problems with IIS 6 and Jrun 4

Hello all,
I am using IIS 6 with JRun 4 as my app server, and I am having problems trying to get authentication and role authorization with Windows Integrated Authentication to work. I have set up IIS 6 to pass-through the authentication credentials to Jrun, without using an anonymous user. What I have done is written a small test servlet that displays the username of the logged in user, and then tries to check if a user is in a test role that I set up in my database. I have specified that a roles table is to be used by specifying a JDBCLoginModule in Jrun's auth.config file. The code for the servlet is below:
package testauthenticationapp;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
public class SecureTestServlet extends HttpServlet {
   private static final String CONTENT_TYPE =
      "text/html; charset=windows-1252";
   public void init(ServletConfig config) throws ServletException {
      super.init(config);
   public void doGet(HttpServletRequest request,
                     HttpServletResponse response) throws ServletException,
                                                          IOException {
      response.setContentType(CONTENT_TYPE);
      PrintWriter out = response.getWriter();
      out.println("<h3>REMOTE USER: " + request.getRemoteUser() + "</h3>");
      if (request.getUserPrincipal() != null){
         out.println("<h3>" +request.getUserPrincipal().getName() + "</h3>");
      } else{
         out.println("<h3>User Principal is null</h3>");
      if (request.isUserInRole("Test_Role")){
         out.println("<h3>User is in Test_Role</h3>");
      } else {
         out.println("<h3>User is NOT in Test_Role</h3>");
      out.close();
1. What I am seeing is that when request.getRemoteUser() is called, the username information is what I expect it to be. It is of the form <Domain>\<Username>. When I try to redisplay the username using the request object's Principal object, the call to request.getUserPrincipal() returns null. This is a little confusing to me since I thought that essentially getRemoteUser() was a short cut for calling getUserPrincipal().getName(), and if I get something for getRemoteUser, getUserPrinicipal should return something as well. I guess they work differently at some level. Has anyone ever encountered this before?
2. When I call request.isUserInRole("Test_Role"), it returns false. I've checked the role name being called for typos in both my database and in the code, and that does not seem to be the case. I think the setup in auth.config is properly configured because I have created many other applications using declaritive FORM based authentication, and the role information was retrieved fine from the database. I would think that when I use request.isUserInRole in my servlet code it would use the same role information, but I could be wrong since this is a different type of authentication. Do you think that the reason request.isUserInRole() is returning false could be tied to the fact that request.getUserPrincipal() is returning null (even though getRemoteUser() is returning a valid username)? How does request.isUserInRole() get its user information, by using getUserPrincipal().getName() or getRemoteUser()?
Any help that is provided is appreciated. Thanks in advance.

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Problem While calling Planning Modeler thru T Code RSPLAN

Hi All,
     When I am starting the planning modeler and after entering the log on details on SAP Netweaver, the web is showing blank tabs of Info Provider/Aggregation level/etc.. Only blank tabs are appearing without any data.
       I have gone thru the SAP Note 919850 (Problems with Planning Modeler..) but it didn't help. Also let me know that is their any connection of plannning modeler with the BI Web Template Maintenance??
    Thanks in advance.
Amit Verma

Hi Amit,
You need the following authorizations to work on planning modeler.
Authorization objects for business planning:
S_RS_ALVL: Authorizations for working with aggregation levels
S_RS_PLSE: Authorizations for working with planning functions
S_RS_PLSQ: Authorizations for working with planning sequences
S_RS_PLST: Authorizations for working with planning function types
S_RS_PLENQ: Authorizations for maintaining or displaying lock settings
Also you need to be on SPS12 for the input ready queries to work effectively.
Some times there could be an issue with the JCo connectivity between the Webdynpro and the BI system.The user assigned to the JCo destination for BI metadata in webdynpro does not have enough authorization in the BI system.
The above authorizations would sort and also check with your Basis team about the JCO.
Refer this too
/thread/227167 [original link is broken]
Hope this helps and assign points if it does.
Raja

Integrated Planning in COPA using KEPM and loading of quantity to SOP

Hi,
We are in process of testing integrated planning in COPA using KEPM and loading of quantity to SOP (MC87) or Transfer Qty to SOP - KE1E. I created a planning level with basic information to plan quantity on product with Period/Year, Version, Plant, Product, Record Type (F), Unit Sales Qty.
Also created Planning Package & Planning Parameter with Planning layout and entered quantity for a material which creates a profitability segment with quantity update. The problem occurs when transferring to SOP the sales quantity either using MC87 or KE1E, it goes into a loop and times out. We tried using different parameters, but ended up with same result.
Are we missing some Config/steps here, any thoughts will help.
Satish

Hi,
You need to transfer COPA plan to inactive version of SOP through KE1E. Thereafter, in PP, the same is transfered to active version through MC78. Thereafter it is transferred to Demand Management through MC74.
Please check with your PP consultant.
Trust this helps. Please assign pts if useful

Performance of "Distribute by key" in Integrated Planning

Hi
I am currently working on an assesment solution in Integrated Planning on SAP BI 7.0, SP 12.
I amcreating a small test where I have copied appr. 5500 records into a transactional cube. On this cube I have a separate aggregation level which is basis for the next step.
Then I want to distribute these 5500 records. I created a "Distribute by key" function for this without selections, doing a top-down for all, changing 0PROFIT_CTR to a specific value with the factor 50. Regarding the factor there used to be 2 lines but I deleted one to debug.
Then I added this to a planning sequence as the only function. Running this in the dialog process it reads 5500 records and moves them to the correct 0PROFIT_CTR.
HOWEVER, it takes around 30 minutes!!! Doing it in the background isn't much better. There are no other processes running, and performance is besides from this quite good.
Do you have any explanation for this?
Br Karsten

SAP has solved the issue. You can see the solution from the correspondance below:
Hello Karsten,
the filter does not only restrict the transaction data that you are
processing. It is also taken into account when the system generates
possible characteristic combinations which is done in your case.
Without restriction, the system tries to generate all possible
combinations. With a restriction in the filter, only the master data
values within the filter restriction will be used in the characteristic
relationships.
Best regards, Dirk Schneider
17.07.2007 - 12:02:25 CET    Core Team    Info for SAP
Hi Dirk
Thank you for your feedback!
However, I have an elaborating question.
Why should I restrict better in the filter? I could also filter on
period but I would still get the same amount of records. But would it
still improve performance due to the characteristic combination
creation? If so, why?
I am just trying to understand the issue, so I can avoid it in the
future.
Kind regards
Karsten
17.07.2007 - 10:56:18 CET    SAP    Reply
Dear Karsten,
it seems the situation described in SAP Note 1015400 applies to your
problem with the planning function performance.
The system is busy with creating characteristic combinations for
the characteristic relationships. Please apply the note in your
system and find a better restriction for filter DISTKEYTEST.
Then test the performance again.
Yours sincerely,
Dirk Schneider
SAP AG, Active Global Support, Regional COE EMEA

Authorization Problem in Integrated Planning

Similar Messages

Maybe you are looking for