Authorization Problem with WebDynpro Services

Hi,
cam someone help me with this error:
No authorization to log on as a trusted system (Trusted RC=1)., error key: RFC_ERROR_SYSTEM_FAILURE
Thanks in advance,
Raj

This means that the user id that you have provided does not have the correct authorizations to log on to the system. You must provide that user id with the needed authorizations to proceed. I believe the authorization object is S_RFC. Give the rights for this and the problem should be resolved.
Regards,
Rich Heilman

Similar Messages

Problems with Target service agreement

Problems with Target service agreement to repair my ipod nano. I have gone to the BBB. Who can I contact at Apple to let them know the poor service that Target gave with a Apple product?

Apple Customer Relations (800) 767-2775

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

I bought a new iphone 4s and I have a problem with the service. How can it be solved? the SIM card is new and was working perfect withe iPhone 4G

I bought a new iphone 4s and I have a problem with the service. How can it be solved? the SIM card is new and was working perfect withe iPhone 4G

Under the answer you want to mark as correct you should see a box that says Correct with a green symbol to the left and a box with Helpful with an orange star to the left. Click on the one you want.
And thanks for thinking about that, it is appreciated.

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Authorization Problem with 9.2.. Please HELP!

I recently got a new laptop, only my second so I'm not at the max. I downloaded 9.2, which I didn't have before. I imported all of my "Purchased" CDs, and keep getting prompted to authorize my computer, which I already did. When I try it again, it tells me I already have the computer authorized. So I go to play the song, and it again prompts me to authorize...
I have gone through every troubleshooting tip, I emailed them (with no answer, even after 48 hours...) I stopped in teh local apple store where the man proceeded to smirk the entire time, and had the nerve to tell me if I had a MAC it would work fine.
I tried to get an apple "specialist" to call me, but while I was setting it up, I was informed I would need to PAY TO GET SERVICE!! What happened to the 1,000 songs that I PAID FOR??
Needless to say I'm livid. If anyone could help me here I would really appreciate it

I have in my room 2x usb keyboards and one ps/2 . I have also conenctor USB->PS/2 and the keyboard is not working at all when im using it to connect it to my PC. My friend told me that i should have no problems with getting into bios on usb keyboard. Probably i turned off an option in bios which is called USB Legacy Device Support and thats why i cannot get into bios with my usb keyb. But im worried, if I reset my bios settings, And that option will be on ? Will i be able to get into bios then ?
Could an owner of this board told me, what happens with this "USB Legacy Device Support" after bios reset ? Is EN or DIS ?
Regards

Problem with web service that returns an object with a String that have som

Hi everybody:
I have a problem with a web service I am doing, I have made a web service that returns a collection of objects, the objects have a set of properties, there is one property that is a String,this property consists in a text fragment that could have some characters that are considered special in XML like &, <, >, " and that's why when I execute the service from a client an exception is thrown:
{code}
Exception in thread "main" org.codehaus.xfire.XFireRuntimeException: Could not invoke service.. Nested exception is org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
at org.codehaus.xfire.fault.XFireFault.createFault(XFireFault.java:89)
at org.codehaus.xfire.client.Client.onReceive(Client.java:410)
at org.codehaus.xfire.transport.http.HttpChannel.sendViaClient(HttpChannel.java:139)
at org.codehaus.xfire.transport.http.HttpChannel.send(HttpChannel.java:48)
at org.codehaus.xfire.handler.OutMessageSender.invoke(OutMessageSender.java:26)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:79)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:114)
at org.codehaus.xfire.client.Client.invoke(Client.java:336)
at org.codehaus.xfire.client.XFireProxy.handleRequest(XFireProxy.java:77)
at org.codehaus.xfire.client.XFireProxy.invoke(XFireProxy.java:57)
at $Proxy0.search(Unknown Source)
at cu.co.cenatav.webservices.client.Client.main(Client.java:26)
{code}
I know that this is happening because special characters are sent by the soap message but I don't know how to solve this problem.
How could I avoid this exception ?
I hope you can help me.
Regards.
Ariel

Hi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin

Binary data problem with web services on JRockit but not Sun JDK

I have a problem with binary data in SOAP and JRockit
(jrrt-3.0.0-1.6.0-linux-x64.bin) . I have an set of web services based
on EJB 3.0 which return images as byte arrays inside a SOAP envelope
to be consumed by .NET 2 services. The host app server is Oracle
Application Server 10.3.1 on RHEL Linux update 4, on 64 bit Xeon 5500
series HP blade hardware.
While most images are fine most of the time, one particular image
gives this message when being consumed in the .NET client:
The '■' character, hexadecimal value 0x1F, cannot be included in a
name. Line 2, position 380038.
The MSDN suggests that this is usually caused by non-escaping of reserved XML characters like < but this isn't one of those.
The SOAP looks ok and for the life of me I can't see why this ought to
be a problem, especially since the problem doesn't arise running with
the SUN JDK 1.6_06 64 bit)
When making the same call from the OAS Enterprise Manager, I can make the same call with no problem (but the data is just rendered as character data in a browser) which maybe suggests some incompatibility with how JRockit is serializing the data ?
Any ideas, I would be very happy to hear - JRockit gives a 15% or so
speed boost to the website that these services power so obviously we
want to use it if possible.
Edited by: RichLiv on Nov 14, 2008 4:54 AM

Seems to be the case that using MTOM stops this problem with JRockit. Strange but apparently true (so far).

Authorization problem with VF01 "Create Billing Documents"

Dear All,
We face following problem with VF01 "Create Billing Documents".
Transaction: VF01
User: Joe
Authorization of Joe:
     VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
     FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
The objective for Joe:
   Joe is qualified to create bills in
      sales org A only for billing type 1 and in
      sales org B only for billing type 2.
   Joe should not be able to create bills for
      sales org A with billing type 2 and in
      sales org B with billing type 1.
How can we solve this problem?
We already searched for userexits without any success.
Any help or ideas are very appreciated.
Regards
Markus Wilhelm
Project Manager ERP

Dear,
There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
So maybe it is easier to have a different sales organization.
Another option would be to create a new authorization object and check it in the billing documents.
If you wish, you could modify program LV60A005 & LV60A006.
Then you might check various user/customer exits.
Some functions to check: EXIT_SAPLV60A_001/002,
EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
Regards,
R.Brahmankar

Big AD44 problem with nokiaTurkey service!!!

I gave my AD 44 headset to nokia service because i could not get any voice one of the earphones. It was 20.06.2008 when i gave it and till now they did not give any answer and new headset of AD44. They always keep me in suspense and i am so angry. Is there anyone who may have a service problem with nokia like me? I am telling to all nokia auhorities via this forum that NokiaTurkey do not want people buy nokia i think in Turkey, because this is not ,which they did to me, a support and this must not be Nokia. I use 5700Xpress music and i started to hate nokia

Well, now they "don't like how the mother board sounds so we will replace it".
Was supposed to be done last Tuesday, but it won't be done at least until next Wednesday.
I am so hating on you, Apple, now!!
New computer just dead out of nowhere after only 3.5 months and now getting screwed over by the service. It's been more than a month now!
You should get your act together, I think I will just get rid of this one as soon as I get it back, and not deal with this anymore!

Problem with Web Service Model code generation

Hello,
I'm importing two different web services into the same web dynpro component, which both contains properties "allGroup2" of type "All2".
This causes some problems with the code generation, first of all the Model-classes can't be generated because they don't know which of the two All2-classes to use. If I fix that problem (which can be easily done by adding the correct import statement) I still can't use the models in my web dynpro component, since it too doesn't know which of the All2-classes to use.
Even though I can fix this by adding imports and fixing the code, it of course gets regenerated next time I rebuild the project, and my changes are lost.
Does anyone know how to solve this?

Apparently this is a known bug which is fixed in SP15.
Regards mattias

Problem with shared services,, cannot load "assign access control"

i m using 11.1.1.3 version of EPM.
I have configured Essbase with Shared Services.
When I do right click on application on shared services and select "Assign Access Control" , it gives "loading.." .it remains same for hours..
I re configured essbase ,, but problem remained same...
Could you please suggest what I can do assign filters to users.

Have you given maxl a try:
grant filter appname.dbname.filtername to user;
Cheers
John
http://john-goodwin.blogspot.com/

Authorization problems with oranetb user

We have set up Apex in an oracle database, that are installed on unix operative. We have problem with the authorization
for the oranetb user. On the unix system we have one user that can call scripts with for example unix command like ls,
cp, etc.
Now we want this oranetb user to run unix commands in scripts, without change the user in unix environment. We have
been told that we can use something in the script, with PATH’s and authorization for oranetb user. Have you ever done
something like this? And can you help us with something that you think can help us?
We also have the same problem to run workflow (Informatica) from a script in unix, when apex is calling the script.
If you want more information, please send a mail to me.
Email: [[email protected]]

hunt3r,
iTunes Store menu -> View my account... Once you've logged in, there's a button to deauthorize all your current machines and start you back at zero machines authorized. Try that.

URGENT: Authorization Problem with SolMan 4.0

Hi all,
I'm still configuring the SolMan 4.0 . I did all the basic customizing but still have an authorization problem. If I want to create a new support message and want to choose the System/IBase, i get the message "no authorization". And the "KeyUser"-User or "FirstLevelSupport"-User even cannot open the transaction "notif_create".
I tried randomly some roles without any proper results:
SAP_OP_DSWP
SAP_RMMAIN_EXE
SAP_SCDT_ALL
SAP_SCDT_DIS
SAP_SCIDM_ALL
SAP_SCIDM_DIS
SAP_SCOUT_ALL
SAP_SETUP_DSWP
SAP_SMSY_ALL
SAP_SMSY_DIS
SAP_SOL_AC_COMP
SAP_SOL_KW_ALL
SAP_SOL_PM_COMP
SAP_SOL_PROJ_ADMIN_ALL
SAP_SOL_PROJ_ADMIN_DIS
SAP_SOL_SERVTRANS_CREATE
SAP_SOL_TRAINING_EDIT
SAP_SOL_TRANSPORT_DIS
SAP_SOL_TRANSPORT_EXE
SAP_SOLAR01_ALL
SAP_SOLAR02_ALL
SAP_STWB_2_ALL
SAP_STWB_INFO_ALL
SAP_STWB_SET_ALL
SAP_STWB_WORK_ALL
SAP_SUPPCF_ADMIN
SAP_SUPPCF_PROCESS
SAP_SUPPDESK_ADMIN
SAP_SUPPDESK_PROCESS
SAP_SV_FDB_NOTIF_BC_PROCESS
SAP_SV_SOLUTION_MANAGER
The "KeyUser" has the Roles:
SAP_SUPPCF_CREATE
SAP_SUPPDESK_CREATE
The "Processor" has the roles:
SAP_SUPPCF_PROCESS
SAP_SUPPDESK_PROCESS
Has anyone an idea??
Best Regards
Philipp

Hi Phillipp,
did you do the step 1.4 from service.sap.com/solutionmanager media library technical papers Service Desk: Additional Information ? You have to create the ibase ....
Lando
P>S> Don't forget the points if this answer is hepfull

OSB - Setting http Authorization header with Proxy Service

Hi,
I have the following scenario:
PS1 -> PS2 -> BS (with a SA configured to pass through)
I need to set the Authorization http header based on some information in payload, so:
PS1 receives the payload and route to PS2, where username/password are extracted and using a java call out the base64 hash is generated.
In the PS2 route i'm trying to set the Authorization header using the set Transport Headers option.
When i do a request to test this operation, osb show me a beautiful CredentialNotFound exception.
I have tryied to set the Authorization header in the route on the PS1, without success.
Someone can help me ?

I can't set the Proxy Service to do the authentication. I will try to explain better:
I have a Business Service which have a Service Account associated to pass through the Authorization header to the service provider do the validation.
I front of this business service i have a Proxy Service which route the requests to the BS.
All partners send this Authorization header, but now, i have one that will not send no matter what.
The username and passwrod will come into the payload (and will be variable).
In some point before the proccess i need to extract the information from payload and set the Authorization header.
Ty for you time.
Edited by: GSanches on 09/07/2010 09:59

Authorization Problem with WebDynpro Services

Similar Messages

Maybe you are looking for