Authorization - Restrict to view non-leading ledger only

Dear Gurus,
Is it possible to allow users to have access to view non-leading ledger only and not main ledger?
However, at posting, we will want users to still have access to post to main ledger.
Appreciate your expertise on this!
B Regards,
Wong

Hi Atif,
Thanks for the response.
I tried that but it is now telling me that I need to provide the leading ledger authorization too.
Any idea why?
We will like to only provide non-leading ledger authorization for displaying reports.
Regards,
Wong

Similar Messages

  • Posting overhead expenses in country specific Non leading ledger only

    Overhead expenses pertaining to the consturction of Fixed assets need to be be capitalised as per Indian Accounting standards. But at the same time according to IFRS standards the Overhead capitalisation is not acceptable. I want to know whether there is any kind of trasaction or customisation to post these overhead expenses such that they appear only in leading ledger and the Non leading ledger of Country specific only and not in IFRS set non leading ledger.

    The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand.   Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum.  Therefore your message has been moved.  Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Customer Solutions Adoption (CSA) team

  • Post SKF only to New GL -Non leading ledger

    Hi New GL experts,
    We have an issue with SKF ( Statistical key figures) in New GL.
    The below 2 options are considered:
    1. Entry from KP46 ( CO Module) - Flowing to Leading and Non leading ledger. But the period is wrongly derived in Non leading ledger.
    2. Entry from FAGLSKF1 ( New GL) - Posts to both Leading / Non leading ledger ( with correct periods) - But does not flow to Controlling.
    Is there any way to post the SKF to Non leading ledger only ? or to CO module only without updating to Leading / Non leading ledger ?
    Thanks in advance for your help.
    Siva

    Hi Siva
    Option 1 - If you deactivate the "Integrated Planning" in CO Version 0 OKEQ and also in GL Planning, the Plan data in CO wont auto update to New GL at all..
    You need to then manually push the plan data into New GL using a special T code.. You can find the T code in the SPRO where you set up GL planning
    Option 2
    FAGLSKF1 does not update controlling, as designed.. So, maintain your SKFs independently in FI and CO
    Option 3
    Try to raise it to SAP if the period in Non Leading Ledger is wrong.. Ideally, the period you enter in KP46 should convert to the Non Leading Ledger period as per the Fiscal yr variant of Non leading Ledger
    Br, Ajay M

  • Cost center not updated when posting in non leading ledger

    Hello FI Experts
    I have two ledgers - Leading and Non Leading Ledger.
    When I posted expense entry it updated both the ledgers and updated cost center value. This updated value i checked in cost center report KSB1.
    For Ex: Rs. 1,00,000
    Now I posted another expense entry in non leading ledger only. For Ex: Rs.50,000
    How ever this entry didn't updated cost center report value. I checked in report KSB1
    So I want to know:
    1. Are there any cost center reports / profit center reports in controlling module where I can get non leading ledger specific amount in cost centers and profit centers
    2. Is it possible to run assesment and distribution cycle, cost reposting and other CO transactions for non leading ledger amount
    Deepak

    Hi Deepak.
    You can verify is the cost center was posted on document running tcode SE16N on the FALGFLEXA table, put the document number to do research.
    After you can trying to post the new document through Tcode FB50L choosing or not a legder specific, then verify the document was posted correctly running the Tcodes SKb1 or Se16N with FAGLFLEXA table again.
    Also you can check this link Checking the Allocation of General Ledgers to Cost Centres
    Kind Regards
    Jandoval Nascimento

  • Balance Carryforward - Non-Leading Ledger

    Hello SAP'ers,
    We have 2 ledgers, 1 leading of course with a Fiscal Year of June to May, and one non-leading ledger with a fiscal year of April to March.  I can't find any documentation on when to run the balance carryforward program for the non-leading ledger.  We have started FY2009 for our non-leading on April 1/  Do  I run FAGLGVTR - Balance Carryforward (New), for the non-leading ledger only?  I know in June I will run it for the leading.  SAPs info is fuzzy regarding the non-leading carryforward process.
    Thanks for your help.
    JIm

    Hello,
    I am not sure if I understand quesition correct.
    1. Internal order per ledger - this link might give you some information.
    FB50L FI-posting to an internal order
    You can report internal orders per cost element (acutal and plan)
    Use reports in: SAP Menue/ Information Systems/Accounting/Controlling/Reports for Internal Orders/Summarization Reports or/and More Reports
    as an instance: S_ALR_87013010
    direct output to Excel and drill down functionality for details.
    2. GL balances per ledger: use F.08 and select ledger, then you have report per ledger
    Let me know if this is what you have expected.
    all the best Erwin

  • Posting in Open item managed accounts in Non Leading ledger

    Hello,
    I would like to know how can we post into a open item managed G/L account in the non-leading ledger only.
    If it is not possible, then what could be the reason for the same?
    Regards,
    Sameer

    As per the New GL design it is not possible to post an entry specific to non lead ledger  to a GL which is open item managed. The reason is very clear. In non lead ledgers we do not do clearing we only do adjustments entries. Clearing can only be done in a lead ledger. Ask yourself about making a payment to a vendor from non lead ledger. It is not at all sensible.
    What you need to do to handle this scenario is to create a new GL (if it is a B/S account then mark it as line item managed and in the text you need to mention that this account is specific to non Lead ledger postings. There is no way in ECC 6.0 to flag a GL for non lead ledgers only. Once you create this account you can post an entry to this using T Code FB50L. From financials standpoint you can club this new GL in the same group or number range where you have the same account with open item managed checkbox.
    SAP is working to extend the clearing functionality to non lead ledgers but I am not sure which enhancement pack will have this feature. Till that time you need to follow the solution as described above.
    Hope this helps

  • ECC 5.0 BAPI for posting documents only in non-leading ledger

    Hello,
    for an FI-interface i want to call an BAPI for posting the documents. The document were posted to the leading ledger and to the non-leading ledger by usage of BAPI_ACC_DOCUMENT_POST.
    Now there are cases to post documents only to the non-leading ledger.
    Is there anywhere a possibility to tell the BAPI (e.g. enter the ledger group) only to post to the non-leading ledger or is another BAPI available to do so.
    Thank you for your help.
    Thomas

    Hi Thomas,
    You can use the same BAPI for any type of ledger postings. You can restrict your postings to Type of ledger.
    Cheers
    Srinivas

  • Posting to only Leading or Non leading ledger in New GL

    Dear Experts,
    What are the circumstances under which a there could be a requirement of posting a JV in only Leading or Non leading ledger in New GL?  And also it would be of great help if someone tells me the procedure of doing such posting.
    Thank you in advance.
    Regards
    Paul

    Hi,
    If you have assigned all your ledgers to the same group, then you are not actually using the feature of parallel accounting, as both will get the same values.
    You should have created two different ledger group, - one for leading ledger and second for non leading ledger.
    Then you should be able to post in a particular ledger group (i.e. leading ledger or non leading ledger.)
    Regards,
    Gaurav

  • Posting period for Non leading ledger

    Hi
    I am having Leading ledger & Non Leading ledger.
    I am posting a document on a particular date. The period relating to that date in leading ledger is open & in non leading ledger is closed.
    As per SAP standard the system will check the leading ledger & allow the posting.
    Is it possible to write a validation for the following scenario.
    If a document is posted the system should check the posting period in both  leading & non leading ledger, if both are open then only the document should gets posted other wise an error message should be displayed.
    Kinldy help me to address this issue.
    Regards
    R.Karthigayan

    You have a few options here.
    1 make sure your periods align each other
    2 Use both selection options in OB52 and allow certain users to restricted periods
    3 Use authorizations to validate the user if they can post into a period
    4 Create a user exit on the save accounting document function module to check the rules.
    Please award points if this is useful.

  • Whether Non leading ledger will have copy of Leading ledger transactions?

    Hi,
    I have basic understanding about leading and non leading ledgers. My question to the forum is whether non leading ledger will have copy of leading ledger transactions meaning whether entries posted from other modules like SD,MM,PP will be available in both leading and non leading ledger or how it will be saved in system. Then if  I post any entries only in non leading ledger, for particular set of GL's and If I want to view the GL balances line item wise (with entry posted in non leading ledger) how can i view it.
    Regards
    Karthikeyan G

    Hi karthik,
    The postings in different ledgers happen through Ledger groups.
    Say you have one Leading ledger - 0L and two non leading Ledgers N1 & N2
    In Configuration you define ledger groups
    You can have a single 0L Ledger in a ledger group or you can have all the three ledgers in a ledger group
    At the time of transaction posting in FI, you have the option to enter ledger group also. If you dont enter any ledger group, then entries will flow in all the ledgers, and if you enter a ledger group where only 0L is included, then it will flow only in 0L and when you use a ledger group where one leading and one non leading ledger is included, it would flow to only two ledgers.
    For entries from MM, SD or other modules, you dont have the option of entering ledger groups, so entries will reflect in all ledgers.
    Regards,
    kavita

  • New Gl- report with some details of CO for the non leading ledger

    Hi,
    I am using New GL. I have 2 ledgers (local ledger and USGAAP); The local ledger is the leading ledger, so is the one which impacts to CO. I need some information in CO (mainly cost center) for the non-leading ledger (USGAAP). I am thinking in create a report painter with the table of non-leading ledger, but I cannot find a table in NGL which save the CO object and can choose the ledger. I am looking too, this information by a standard report, but I cannot find one.
    Any idea about a solution of this situation?
    Thanks,
    Cecilia

    Hi Cecilia, did you assign Cost Center scenario (FIN_CCA) to your ledgers?, otherwise NGL Tables (FAGLFLEXT and FAGLFLEXA) won't have Cost Center field populated. If this is the case, maybe your only option is use BKPF then BSEG + BSEG_ADD (Entry View of Accounting Document for Additional Ledgers) and pull Cost Center from there.
    I hope this helps.

  • GL Planning for Non Leading Ledger.

    Hi All,
    Kindly note that currently I am using GL Planning for Leading Ledger "0L" and it works fine for
    GP12N, GLPLUP & GP12NA.
    I want to explore the possiblility of uploading plan for a non leading ledger(CL) as we have balancesheet report where we can have view for both i.e leading ledger and non leading ledger and their respective plan.Currently I can only see plan for leading ledger only as there is no plan against non leading ledger( CL).
    Please let me know as to how can this be done fi its possible? or the alternative.
    Regards
    Pranay

    Hi,
    you can do it for leading ledger by first deciding the layout and fields you want in it.Then goto SPRO and create your layout.Once your layout is saved then create the planner profile as per your requirement.If you want to upload the data through excel then don't forget to have "Excel integrated" tick activated.
    then go to last option"default parameters" enter the values and execute. this will generate a sytem file click on ok. this will take you to a screen where you will have the  buttons
    1) gnereric file name; enter file name as upload *.txt. so will have to upload the file everytime with this name as upload1,upload2......etc.
    2) file description : save the file description as it is mandatory when you upload through t code GLPLUP.
    this settings will help you upload GL planning
    View : GP12N
    upload GLPLUP
    view changes: GP12NA
    Regards

  • Function of non leading ledger

    Hi
    I am booking expenses in one company code and for management reporting distributing to another company code by cost centre distribution. During this process system is creating cross company code accounting document which we want to avoid.
    I heard that we can not avoid cross company code transaction. But instead of posting entries into leading ledger, system can post these cross company code transaction into non leading ledger during cost centre distribution.
    Is it possible? If yes, please guide me how. If not possible, any other way to achieve above result?
    Following components are active in my system:-
    1.Profit centre accounting
    2.New GL functionality
    3.FICO reconciliation
    Please revert.
    Regards
    DD

    Hi,
    There is exactly only one leading ledger at client level. SAP Provides Leading Ledger with Standard System. Only the leading ledger passes and posts values to CO in the standard system. The Leading ledger manages additional currencies, Fiscal Year Variant and Posting Period Variant that are assigned to the company code. ONe are more SAP delivered scenarios(Cost Center/Business Area/Segment Update) are to leading ledger. These scenarios are updated in corresponding General Ledger view duriing the document posting.
    In addition to the leading ledger, you can also define other, non-leading ledgers that are assigned currencies and/or fiscal year variants that differ from the leading ledger. Multiple/non-leading ledgers are useful for portraying accounting in accordance with different accounting principles(ex. Local and Tax accounting principles). It is not necessary to define Non-Leading ledgers even if you have it is not necessary to assign scenarios(mentioned earlier) to Non-Leading Ledgers.
    Regards,
    Krishna Kishore

  • Converting Non-Leading Ledger to Leading ledger...

    Hi All
    Please let me know if there is a possibilty to convert a non-leading ledger to a leading ledger?
    If yes, please let me know the conversion process.
    Regards
    Kavitha

    Hi Kavitha,
    Follow the path
    SPRO --> IMG --> Finacial Accouting(New) --> Financial Accounting Global settings --> Ledgers --> Define Ledgers for General Ledger accounting
    In Change view: Define ledgers for general ledger accounting: Overview screen, you can make the non leading ledger as leading ledger. But at a time, you can make only one ledger as a leading ledger. you can't maintain two leading ledgers simultaneously.
    But it is not a good practice to make a non leading ledger as a leading ledger. But instead you can use ledger group concept, in which you can make one non leading ledger as reporting ledger..
    Hope this will help you...
    Regards,
    Praisty

  • FC valuation not getting posted to non-leading ledger

    Hi Gurus,
    I need your help to resolve the following issue. We have a company code with 1st LC as EUR and 2nd LC as USD which is group currency. We have valuation area V1 assigned to the ledger group that has set-up for postings to both leadine (0L) and non-leading ledger (Z1). When I am trying to run FC valuation using transaction FAGL_FC_VAL, the valuation document gets posted to leading ledger only. There is no posting to non-leading ledger. The other ledger tab is missing in the GL view of the document confirming that the posting happened in the leading ledger only.
    I have gone over lot of threads in the forum but could not figure out the issue. I would really appreciate if someone can guide me to resolve this issue.
    Thanks,
    Shalu

    Hi Shankar
    Thanks for your reply. Yes, the non-leading ledger is active and has been assigned properly to the ledger group. The set-up is working fine for all company codes except one company code. In our set-up, for all company codes, we are using a valuation area V1 with always evaluate as valuation menthod and CC curency as currency type and Group currency as additional currency. We were having some valuation issues with one company code with existing set-up as Local currency 1 was different from LC2. In order to fix that issue, I created new valuation area V3 with same valuation method and currency type but no additional currency. The ledger group and assignemnts were same. The original issue with curency valuation got resolved but the new issue appeared that the posting is happening only in the leading ledger and nothing for this company code is getting posted to non-leading ledger while running transaction FAGL_FC_VAL.
    If I manually force the currency in F-02 in this company code, the posting does happen to the non-leading ledger. The issue is with automatic postings only using area V3.
    Please help.
    Thanks,
    Shalu

Maybe you are looking for