Authorization Server Error, Computer Authorization not possible. SOLVED

When I try to authorize my computer I always get the error:
Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ... etc.
I am using win7 prof, Adobe Digital Editions v2.0.1.78765
My library recommends this version because v3 works not correctly.
These instructions below don't work for me
http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
Message was edited by: Boruro
solved:
The time of my PC was one hour too late than the time of my region.
Time corrected on PC: now authorization possible.
Message was edited by: Boruro

Hi,
Thanks for your posting.
Could you try to boot to the install DVD ( or a copy of WinPE if you have one available) and choose the repair option in the lower left hand corner?
If so can you try to run sfc with the offline options to see if the system will repair or identify corrupted files?
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

Similar Messages

System error and restart not possible

Hi
I have developed the Proxy to SOAP scenario and it used to work normally as designed, But suddenly it started giving the System error and restart not possible,
I see the following error in the Runtime work bench on the Receiver CC
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Can anyone let me know what the error is
Thanks
PR

Hii
If this channel was in working state earlier, then this error would mean that the receiver webserver hosting the webservice has some problem. You may contact the receiver system for checking out if they have problem at their end and if they agree resend the messages and it should pass through.
It may be problem with certificates even.
Best Regards

When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

Try restarting your computer and your router.
If there is a specific error code, take a look at this article.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694

SAP BPC 5.1 SP2 Http 500 internal server error - page can not be displayed

When our Sysadmin service account are restricted to the app server and the database server ( as they should be in a secured environment) no client
could reach the web site to even use the Osoft directory . We get a Http 500 internal server error - page can not be displayed . This is for a new multiserver install. Is there a problem on the website security or .net configuration?

Yes the install was done by the SAP install consultant but now we are getting an error when we restrict the Sysadmin ID. Server diagnostics and other tests on Appshell passed as well.

Authorization creation by ODS((0TCA_DS01) not possible on PRD system

Hi friends,
I am setting the authorization values by using ODS(0TCA_DS01)(uploading file data to the ODS and then creating it via RSSM). But it is not possible on PRD system on which system is set as "No change to repository cross-client customizing objects".
Are there good solution to set the authorization values by ODS method on PRD system?
Kind regards,
Masaaki

Go to /nsu53 and see if u have no authorization in PRO then go to DEV assign authorization & then transport the same to Production.

Workbook error 310 - save not possible

Hi,
when I want to save a workbook I receive error message 310 - saving not possible. Nothing in my authorizations where changed. In sdn I found also no hint.
Any idea?

Hi,
Please check out the SAP Notes in the link:----
Error 310 when creating an workbook
REgards,
Suman

Dialog Instance installation error - rdisp/msserv_no not possible

Dear All,
While trying to install a DI I am getting the following error:
An error occurred while processing service SAP CRM 5.0 Support Release 3 > Software Life-Cycle Options > Application Server > MS SQL Server > Dialog Instance( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CRM05/LM/AS/MSS/DI.
The log says the following:
INFO 2009-07-20 05:21:54.298
Disconnect from message server (UT1VC7P01/3901) succeeded.
ERROR 2009-07-20 05:21:54.298
CJS-00030 Assertion failed: in getMsPort() rdisp/msserv_no not possible. You need a newer message server.
ERROR 2009-07-20 05:21:54.376
MUT-03025 Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..
ERROR 2009-07-20 05:21:54.470
FCO-00011 The step getMsPort with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_checkMsgServer|ind|ind|ind|ind|2|0|getMsPort was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..).
Please share your views on what could be missing here.
Thanks a lot for your help and time,
Shival

Hi,
Interestingly enough the installation went through by restoring the original kernel files, i.e. kernel fils as soon as the CI installation was completed.
I have upgraded kernel on CI now and am facing another issue of "Dialong Queue info Unavailable".
Not sure if I should open up a new thread for it.
Please let me know your views/ideas on the above.
Thanks a lot for your help and time,
Shival

EBS password - 500 Internal Server Error - FNDCPASS was not able to decrypt

Hello Guys,
I am running ebs 12.1.3 on OEL6. We have been testing for about three months and sudenly there was a prompt at login to chage the sysadmin's password. After that change our system fell apart. We get "500 Internal Server Error" at any attempt to login with URL.
I proceeded to attemtp changing the passwords following MOS doc - "Removing Credentials from a HDADMINd EBS Production Database [ID 419475.1]" but ended up with
"FNDCPASS was not able to decrypt password for user 'APPS' during applsys password change.
FNDCPASS was not able to decrypt password for user 'APPLSYS' during applsys password change"
when I executed
FNDCPASS apps/xxxxxxxxx 0 Y system/xxxxxxxxx ALLORACLE xxxxxxxxx .
I have been reading forums for three days without a possible solution. Has anyone resolved this issue?
Thanks
Mathias

Hello Hussein,
I am still having "500 Internal Server Error" after following all the Notes you mentioned:
1) Removing Credentials from a Cloned EBS Production Database [ID 419475.1] - I followed this without errors
2) FNDCPASS Troubleshooting Guide For Login and Changing Applications Passwords [ID 1306938.1] - helped to accurately change the password of SYSADMIN.
As per note 419475.1, I executed autocfg.sh without errors on the apps and db tiers successfully:
$ADMIN_SCRIPTS_HOME/adautocfg.sh
AutoConfig completed successfully.
$ADPERLPRG $AD_TOP/bin/admkappsutil.pl
$ORACLE_HOME/appsutil/scripts/OFD1_ofindev03/adautocfg.sh
I started the apps and later confirmed and apache was running :
$ADMIN_SCRIPTS_HOME/adstrtal.sh apps/clone
$ADMIN_SCRIPTS_HOME/adapcctl.sh status:
Processes in Instance: OFD1_ofindev03.ofindev03.corp.phillips.com
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oafm | 16670 | Alive
OC4JGroup:default_group | OC4J:forms | 16598 | Alive
OC4JGroup:default_group | OC4J:oacore | 16451 | Alive
HTTP_Server | HTTP_Server | 16395 | Alive
adapcctl.sh: exiting with status 0
Attempted a login and got "500 Internal Server Error"
Checked the apache logs:
cd $LOG_HOME/ora/10.1.3/Apache
The error log contains:
[Thu Apr 25 09:56:58 2013] [error] [client 172.17.3.150] [ecid: 1366898218:10.2.1.162:28237:0:3891,0] File does not exist: /u02/applfind/inst/apps/OFD1_ofindev03/portal/favicon.ico
[Thu Apr 25 09:56:59 2013] [error] [client 172.17.3.150] [ecid: 1366898219:10.2.1.162:30076:0:314,0] File does not exist: /u02/applfind/inst/apps/OFD1_ofindev03/portal/favicon.ico
[Thu Apr 25 09:57:36 2013] [error] [client 172.17.3.150] [ecid: 1366898256:10.2.1.162:30121:0:329,0] File does not exist: /u02/applfind/inst/apps/OFD1_ofindev03/portal/favicon.ico
You may see the full apache logs at : https://www.dropbox.com/sh/x0e1tpjl9fgtgee/Mq5lM0ohAb
Thanks for your time in advance
Mathias

EA2700 500 Internal Server error + SmartWifi is not working

got this "excellent" router yesterday and wasted best part of the day trying to get it to work. configures fine, internet and all setting are working as expected, browsing, wifi, routing etc. however it will not connect via a webpage, and yes i have tried all browsers, cleared cache, tried different pc's, stood on my head, waved a magic wand, all give the same error 500 internal server error.
ok, lets try the linksys wifi utility, it says i must connect a compatable router, hahaha. i have tried running this "superb" utility while on the same LAN, while directly connected, on WiFi, all say the same error. I created a wifiaccount, but it just says i must associate a router with the account.
Happy days, someone please tell me what i am doing wrong before i throw this router at high speed through the window.

Had you tried to power cycle your devices?
1. Turn off or power down the Cable or DSL Modem, Linksys Router and the Computer. Wait for 3 minutes.
2. After that power up the Cable or DSL Modem first, wait for the modem to stabilize.
3. If the Cable or DSL modem is already stable, turn the Linksys Router ON, and then last the computer.
Do you have the latest firmware installed on your router? This is one of the probable cause of your concern. What is the IP address of the computer when wired directly to your modem? If ever the computer wired to your router is getting an IP address same with the default IP address range of the router then change it to 10.10.10.1, just to make sure.

'RSTS_READ' after upgrade error Required conversion not possible (ZFORM16)

Hi,
We have recently upgraded from SAP 4.7 to SAP ECC 6.0.
For client requirements, they have developed ZFORM16 in 2006 by copying the standard form HINCF160.
But after upgradation, when we execute ZFORM16 for 2006 data we are getting the error message:
                         Required conversion not possible
Some analysis of the issue is:
1)     In include: ZPCF16IN3 at statement:    PERFORM read_temse.         " MDSNT927906
2)     It is going to include : ZPCF16IN8 we are getting the error message at the statement :
call function 'RSTS_READ'
The error message is: Required conversion not possible
When I have checked the standard of form 16 HINCF160 code in ECC 6.0 is as:
In include PCF16IN3, PERFORM read_temse. Statement is commented and the corresponding form in PCF16IN8 include is also commented (Form read_temse) and now SAP is using different logic to get the DETAILS OF TAX DEDUCTED.
If I try to comment the PERFORM read_temse in ZPCF16IN3 then I am able to get the Form16 but DETAILS OF TAX DEDUCTED are not displayed. DETAILS OF TAX DEDUCTED logic is in PERFORM read_temse in ZPCF16IN3.
Can someone help me in solving the issue?
Regards,
Prem

We had to restart SAP & Oracle and the issue is solved

Idoc INVOIC - error Tax entry not possible in this item - Message no. FF724

Hello,
I have an idoc in error with the following error message.
In the idoc type INVOIC
Segment E1EDK04:
MWSKZ     N1     VAT indicator
MSATZ     19.000     VAT rate
MWSBT     20.52     Value added tax amount
In OBCD
Partn.Type PartnerNo Tax type Tax rate Cty Tx
LI         FNISL     N1       19.000       V2
Input tax N6 is defined in the system with rate 19.000%
Direction         2     Inbox
Current status    51
Basic type        INVOIC01
Extension
Message type      INVOIC
Partner No.       FNISL
Partn.Type        LI
Tax entry not possible in this item
Message no. FF724
Diagnosis
You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
Example:
With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
Procedure
Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount.
do you have an idea to solve it?
Regards
Arnaud

Message no. FF724
Check note 681538
thanks
G. Lakshmipathi

DTR Error- Checkout is not possible.

Hi all,
I am having a problem with DTR. I wanted to modify a view in a componenet.and I am getting the following error.
Checkout is not possible. See below for details.
View com.prj.Vendor_View
======>problem: DTR workspace is not modifiable
/JD0_TRACK01_Dprj_1sap.com/src/packages/com/prj/Vendor_View.wdview.xlf
please can any one suggest me how to solve this error.
Regards
Thank you
Maruti

Hi Nagarajan Kumarappan
Thank you so much .you are right. I have changed the properties as you suggested and its working now.I could able to modify labels.
By the way may i know how did it happend like that../ as I need to change the properties for each and every related file in the project.Please let me know if you have got any idea.Any way your suggestion solved my problem and I am awarding ponits.
Regards
Maruti

Profile does not activated (it shows an error backup is not possible)

Dear Experts ,
please solve my problem
here i changed one parameter by RZ10 in DEFAULT profile and i saved it then it prompts for Activate or not i said yes but the profile is not activated and it shows an error that is backup is not possible
parameter (login/system_client =100)
i did not get why it showing that error
please clarefy me
Regards

Hi,
Make sure that there is proper access for this file at the OS level. Normally, when you are changing any profile at SAP level it will try to create a backup of existing file at OS level. Also, check if the parameter is set correctly and saved properly.
If you are not able to change the file at SAP from RZ10 then change the same at OS level and after that restart the instance for parameter to take effect. After the system is restarted then again the load the profiles back in to the system using RZ10-->Utilities->Import profile->of active servers
Regards,
Sharath

Backup restoration password required keeps appearing but server error 404 will not let me set up password. This is on my screen every day!!

Every time I open my computer I have this notice: Backup restoration password required. In order to perform backup or restoration for this account, you need to enter the account password.
Not knowing my password, I click on "Forgot Password" and that's when I get the message "Server Error-404 - file or directory not found." This is driving me crazy and I hope you can help me.

Every time I open my computer I have this notice: Backup restoration password required. In order to perform backup or restoration for this account, you need to enter the account password.
Not knowing my password, I click on "Forgot Password" and that's when I get the message "Server Error-404 - file or directory not found." This is driving me crazy and I hope you can help me.

Error - GR reduction not possible in MIRO (Message no. FICUSTOM350)

Hello Gurus,
I am getting error while doing MIRO (GR reduction not possible. Wrong cmmt item (fin. trans. 30) in GR/IR acct) .
I have activated FM - BCS. In Customizing transaction OFUP (Make other settings) I have ticked GR and INV and my update profile is 000101 (Payment budget; Payment basis ; Posting date).
I have created a commitment item for GR/IR specific and assigned financial transaction 40 then also system is giving the same error. The issue is system is not creating a FM line item for GR/IR clearing account at the time of MIGO but only creating for P&L item (Debit Part). Now when we post MIRO system is looking for FM line item for GR/IR (which should have been created during MIGO) for clearing hence error appears.
Please let me guide if I have missed some configuration or have done some wrong configuration.
Full Error description is :
GR reduction not possible. Wrong cmmt item (fin. trans. 30) in GR/IR
acct
Message no. FICUSTOM350
Diagnosis
You are trying to reduce a goods receipt line (GR) with an invoice (IR).
However, the GR/IR clearing account has an incorrect financial transaction ('30'
instead of '40') in the commitment item.
System Response
The system cannot calculate a GR reduction. This is not a program error, but
rather an inconsistency in the customer master.
In order to calculate the GR reduction, Funds Management (FM) updating has to
create original records for the GR lines with value type '54' and transaction
'RMWE'. Otherwise it is not possible to calculate the reduction.
Procedure
Correct the commitment item of the GR/IR clearing account. If necessary,
reconstruct the document in FM.
Regards
Rohit

Hi,
Sorry, I have a question about message FICUSTOM350. I also encounter this error message when we do MIRO and set the AP amount = 0. I try to set GR/IR as '40' but I found GR/IR account will not determint through FMDERIVE. I found this seems the standard behave in SAP. So, I close the message FICUSTOM350 and MIRO is work OK without error. But when I execute the report FMRP_RFFMEP1AX , the budget is incorrect. The system does not reduce the payment budget. Ex: PO amount = 7000 USD, MIRO AP amount =0 , I think the total budget should be 0, but the total payment budget of the report is 7000. Please advise.
Thanks and Best Regards,

Authorization Server Error, Computer Authorization not possible. SOLVED

Similar Messages

Maybe you are looking for