Authorization to execute Report
Hi,
when a user start the following path all the fields are not translated.
<prt_protcl>://<prt_server>/<bi_launcher>?REPORT=ZPAYABLEREPORT
Where can I found the value of <prt_protcl> <prt_server> and <bi_launcher>.
It works when I start this path with my signon.
Thanks,
Eric
the problem was that for the user in the parameter tab for the parameter ID RSPOR_DEFAULT_PORTAL the value was wrong.
Eric
Similar Messages
-
Brower hang after executing report
Hi,
I installed 9ias 1.0.2.1 on Sun Machine Everything is working fine except Report server. Executing report from browser taking long time and after that gave me this error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
I also fixed TNS_ADMIN location but have same problem.
When I started Reports server It's started without error.Hi.
You should find whrther your problem is in bex web or general.
Did you tried to execute via RSRT with this username ?
Do you have any authorization infoobjects in query ?
Regards. -
Hi Gurus,
While executing the program S_ALR_87013105 (Detailed Reports
For Sales Order : Plan/Actual Comparison ) system showing the selection log.
"Have no authorization for the report/table 7KU6_001 and 7KU6_002".
But for the user the authorization check through SU53 was successful.
Pl can any one suggest on this issue.
Thanks in advance,
VijayHi,
Contact your basis consultant to provide the missing authorisation. This is one of the authorisation object.
Regards,
Sankar -
Hi
I have made one report, I needed to check the authorization for the report, how to do it.
Eg. One employee is executing the report, he only needed to select his transaction
If somebody from one sales organisation, they only needed to take the data belongs to the sales office.
SELECT-OPTIONS: p_vkorg FOR tvkot-vkorg.
SELECT-OPTIONS: p_pernr FOR pa0001-pernr
for example two selection parameter is displaying. if my employee no is 100, while trying to enter execute the report for 200 employee no. no data should show. like that vkorg filed also should work.
Please let me know how it possible.
Regards
Sebastian JohnHi,
You can change the code below
*---Authorization for Company code entered by the users.
*---This code will restrict users to see data for company
*---codes which they are not authorized to.
*---Select all the company codes based upon selection entered by the
*---user
SELECT bukrs
FROM t001
INTO TABLE li_bukrs
WHERE bukrs IN z_bukrs.
IF sy-subrc EQ 0.
*---Clear Screen variable for Company code
CLEAR z_bukrs.
REFRESH z_bukrs.
*---Filter and prepare Select options for Company code table to be
*---passed to query. Table will only have values of company codes he is
*---authorized to for display.
LOOP AT li_bukrs INTO lwa_bukrs.
AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
ID 'BUKRS' FIELD lwa_bukrs
ID 'ACTVT' FIELD '03'.
IF sy-subrc = 0.
z_bukrs-sign = 'I'.
z_bukrs-option = 'EQ'.
z_bukrs-low = lwa_bukrs.
z_bukrs-high = space.
APPEND z_bukrs.
ELSE.
lv_flag = 'X'.
ENDIF.
ENDLOOP.
*---Give warning message to the user in case he is not authorized to see
*---data for all the company codes that he has entered.
IF lv_flag = 'X'.
MESSAGE ID 'ZFNG' TYPE 'W' NUMBER '015'.
ENDIF.
ENDIF.
This code does an authorization check at company code level and removes all the company codes that user has entered but is not authorized to look for. After that we pass the filtered list of company codes for which user is authorized to in the select query and fetch the results. You can first select all the records from database for PERNR and VKORG. Then filter them and prepare new list of VKORG and PERNR after performing authorization check and pass it further to select queries in your program.
KR Jaideep, -
Hi All,
I am new to BI Authorizations. In my Project there are 150 Users are there.So for each user,Authorization Object
is created in RSECADMIN and Roles are created in PFCG Tcode.
Initially we have created 9 Reports and it is running in BI PRD. In all 9 reports we are using the Info Object
"0CRM_PRCTYP - Business Transaction Type" and Authorization Relvent is Unchecked in this Case.
Now the Client wants some more reports and need to provide Authorization for this Field "0CRM_PRCTYP - Business
Transaction Type".And these new reports will be used by "New Users".
So i have Checked the Authorization Relvent for the Info Object "0CRM_PRCTYP - Business Transaction Type" and
Created Authorization Variable in Reporting Level.After doing this, I have executed the report by logging with new
Users and it is working fine for new reports.
Then i have checked the Old reports (9 Reports) ion RSRT and found that the error "NO AUTHORIZATION" for all 150
users.
Can you please help me how to rectify this error.
Thanks,
Jelina.Hello Jelina,
First, try to check the reports by running them with the user account in transaction RSECADMIN -> tab Analysis -> Execute as user.
If this will return an error please go with transaction SU53 and check what role/authorisation has generated the error. Afterwards, launch PFCG, go to Authorisation tabs, Display authorisation and add the reports BOTH under -> Business Warehouse-> Business Explorer Components and ->Business Warehouse -> Business Explorer Components - Enhancement to the Owner.
After this press the Generate button (looking like nuclear hazard but in red&white) and SAVE. Go to the TAB Users in PFCG and press the button USER COMPARISON and afterwards SAVE.
Now it should work. Let us know if you still have problems.
br,
Dan -
Time out when run execute report on Webgui or transaction iView
Dear All,
We found the error as bellow when we execute report that load huge size of data so it would like many time to get it.
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu Mar 6 19:33:49 2008
Module: icxxthr_mt.c
Line: 2698
Server: irpc16_QAS_50
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Anyone please tell us about the way to edit timeout of webgui or iView.
Thank you very much,
Anek.Dear Krishna
It's helpful.
Goto rz10 transcation
Choose: Instance profile
Select: extended maintaince
Click: change
Set value for parameter 'icm/keep_alive_timeout'
If there is not parameter 'icm/keep_alive_timeout', create it.
Save it.
Restart SAP.
Please tell me how to give point for you.
Thank you for ur reply,
Anek. -
Error While Executing Report - "Field symbol has not yet been assigned."
Dear All,
I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
Based on this Cube I had developed a report.
0MRP_CONTRL characteristic filled using 0MATERIAL master data.
Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
Also getting dump in tcode ST22.
This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
Please help.
Regards,
Divyesh Khambhati.Hello Shashank,
Thanks for your reply.
No material is not checked for authorization relevant.
Is it required to make 0MATERIAL to be checked as Authorization relevant ??
I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
Divyesh Khambhati
Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM -
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
Error while executing Report in BI7.0
Hello Friends,
My BI7.0 system is a fresh installation.
I have created a query using Nw2004s Bi Frontend-Bex Query Designer.
After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the browser
The page cant be displayed. & the URL is
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=IC_SLS_Q001&VARIABLE_SCREEN=X&DUMMY=1
Is this URL correct one? Or do i need to make any further settings ? If so what are those settings & where they need to be done?
Why am i not able to execute the Bex report in the browser?
Please let me know
Thanks
mv_dFurther to what Manjunath has pointed out..
Note Symptom
After pressing the "Execute" button in Web Application Designer, Query designer or Report Designer, the url is not valid. Possible variations are:
The server is not included
The port is not included
URL is like http:///irj..... (missing server & port)
Other terms
URL generation, Execute Query, Execute Web Template, Execute Report
Reason and Prerequisites
Missing configuration of the portal. Check following:
1. Start the transaction SE37
2. Call the Module RSWAD_URL_GET
3. Fill the parameters as follows
I_ACTION: NEW
I_OBJTYPE: QU
I_TECHNAME: QUERY
4. Execute and check the result
5. E_URL=http://<your expected server>:<your expected port>/irj/...&QUERY=QUERY
Solution
If the result is as you expect, the problem is not in the configuration. In other case please do following:
Run the transaction SE16
View the table RSPOR_T_PORTAL
Execute it (expand the width to see the parameter URL_PREFIX)
Check if there is a prefix for your portal maintained
If not, correct it editing this table directly.
For any other configuration problems please read the note 917950
Hope it helps...
Arun -
REP - 300 Error while executing report from Application
Hi,
I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.
-
XL reporter error occurred while executing report! Rows: 25203 Columns: 30
An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny -
Restrict 'Executing report in background' from selection screen
I want user to not to select option for executing report in background from Selection Screen of the program.
i.e. 'Execute Program in Background' option in 1st menu bar tab should either be disabled OR if user clicks on it then he should get error message on selection screen itself.
Thanks,
FalguniHi Falguni,
Write the code based on function code SJOB in the event AT SELECTION-SCREEN. Write the following code :
AT SELECTION-SCREEN
CASE SY-UCOMM.
WHEN 'SJOB'.
MESSAGE E000 WITH 'You cannot schedule background job'.
ENDCASE.
Thanks & Regards,
Faheem. -
Execute report output using RUN_REPORT_OBJECT built-in in Oracle Forms 10
hello,
am executing report when am pressing the Button
in the WHEN-BUTTON-PRESSED Trigger i wrote the below code
Declare
v_report_id report_object;
v_report varchar2(100);
vjob_id varchar2(100);
vc_rep_status varchar2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT('new_test_report');
v_report := RUN_REPORT_OBJECT ( v_report_id );
vjob_id := substr (v_report,31); -- ( vc_ReportServerJob, length(vc_reportserver)
+2, length(vc_ReportServerJob) );
vc_rep_status := REPORT_OBJECT_STATUS (v_report);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id||'?server=rep_mohahubkpcomp_ORaHOme_IAS'||'&userid=bedman/bedman@bedman'||'¶mform=no','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
the above code is executing the output but it is asking the AUTHENTICATION TO OID(Oracle Internet Directory). If i give this id then only the Output is displaying..
in WEB.SHOW_DOCUMENT i mentioned that userid is DB id... if it is wrong
which id i have to specify.
and The report is located in Reportserver . and it is added to Form. in report node.
it is an urgent requirement.
Thanks & Regards
Gagan.Hello,
Have you created a "reports object" in Forms ?
(watch under the Reports node in the "Object Navigator".
Regards -
Hi Abapers,
I had a requirement to convert the smartform 'zpurchase'(customized std. PO form /SMB80/MMPO_ES), into an executable(report) program..so tat the user can execute this program by giving the Po Number in the run time and get the required form print out....
I had written a print program(zpo) for this form, but after executing i got only the layout not the values .... So guide me how to pull the values from tcode ME23N.....
REPORT ZPO.
tables: ekko,pekko,ekpo,ekpa,eket,ekkn,ekek,komk.
*parameters: iv_druvo like druvo.
parameters: iv_ekpo like ekpo-ebeln.
data : fm_name type rs38l_fnam.
data: it_ekpo like standard table of ekpo,
it_ekpa like standard table of ekpa,
it_pekpo like standard table of pekpo,
it_eket like standard table of eket,
it_tkomv like standard table of komv,
it_ekkn like standard table of ekkn,
it_ekek like standard table of ekek,
it_komk like standard table of komk.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZPURCHASE'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
* EXCEPTIONS
* NO_FORM = 1
* NO_FUNCTION_MODULE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Code as follows..........
CALL FUNCTION fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
IS_EKKO = ekko
IS_PEKKO = pekko
* IS_NAST =
* IV_FROM_MEM =
* IV_DRUVO = druvo
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
TABLES
IT_EKPO = it_ekpo
IT_EKPA = it_ekpa
IT_PEKPO = it_pekpo
IT_EKET = it_eket
IT_TKOMV = it_tkomv
IT_EKKN = it_ekkn
IT_EKEK = it_ekek
IT_KOMK = it_komk
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
No authorization to execute the STS
Someone knows how can I solve this problem?
"No authorization to execute the STS."
Regards
Guilhermehi,
ask basis/security team to grant R_STS_PT authorization for you ?
http://help.sap.com/saphelp_nw04/helpdata/en/c8/ad8438619a7c51e10000009b38f842/content.htm
Maybe you are looking for
-
Not loading correct startup prefs (safe mode?)
Trying to rebuild my system after a hard drive failure (backup on external drive was somehow corrupted as well). Luckilly, my ipod contained all my music (although I did lose all movies and TV shows) and was up to date. I have my new system configure
-
MSI Wind with rtl8187se (name of module and wireless hardware) and using wpa-psk. New installation of arch. Wireless works fine for 1-2 minutes then fails (can't get any response pinging google or pointing elinks to google, etc). What I'm doing: ba
-
How do I go about downloading or reloading Itunes onto my computer, without loosing all of my uploaded music? I have attempted to reupload itunes and it will not successfully complete the download/does not give me an option to update itunes when i t
-
Hi everybody, I have a problem in moving CodeWarrior Photoshop plug-in project to Xcode Photoshop plug-in project: 1. I had done as step by step in file makingxcodeprojects.html (Conversion process for Adobe Photoshop plug-ins). I thinks who concern
-
Please I need help in java oracle.apps.per.DataInstall
Hi all Please can any body help me , when I try to run datainstall to prepare add hrglobal patch by using this command: java oracle.apps.per.DataInstall thin hostname:dbport:oraclesid but I got this error : Data Install java.sql.SQLException: Io exce