Authorization to logon as trusted system (Trust
Hello everybody,
I want to configure the RFC between the solman and IDES server. so i have done the following things
1. Create a user sapuser in solman and Ides server with the Authorizations, SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN,ZSAP_S_RFCACL,ZSAP_SOL_SERVTRANS_CREATE
2. Create the RFC named SOLTRUSTED in IDes with detail as
Target Host :- solman
I.P :- 192.168.1.4
System No :- 00
Trusted System : No
After that i have test the connection its working, Same as Remote Logon, . Logon screen asking for user name and password is also working fine.
3. execute the T.cdoe SMT1 create a Trusted System SOL with details as
Trusted System SOL
Technical settings
RFC Destination SOLTRUSTED
Authentication type 3
message server solman
Trusting system
Trusting system RIS
Application server ides_RIS_08
here when select Entry-->authorization check -->trusting system here 2 times logon screen appear for solman logging and generate the Error " Error when opening an RFC connection
I have also set the authorization for the object S_RFCACL with required field value as *
Also i have check the TRUSTING_SYSTEM@SOL Rfc, then the connection test successfully done but at Remote Logon No, generate error as - authorization to logon as trusted system (Trust
So please guide/suggest me that any missing or additional steps missing for configure the trusted and trusting system
Thanks
Ganesh
Hello,
As per your suggestion, i have two system Solman and IDES, I want to connect solman and Ides
1. i have create the RFC in IDES
RFC name SOLTRUSTED
Connection type 3
Target Host SOLMAN
System No 00
ON clicking Connection Testing - successfully
On clicking Remote Loging, Logon screen is display, on entering Client, Username, and password successfully logon to the solution manager.
IP address 192.168.1.4
As per suggetion of second step, I have been trying to create the trusted system, i enter the name SOLTRUSTED,at the logon screen enter the client 901, user name and password
Now on the Trusted System means on Solution Manager
create the RFC named RISCLNT999
Connection type = 3 and descrption
enter the target host - ides
system number - 08
trusted system = yes
client -999
check the current user option
and SAVE
All the setting i have done, but from the IDes server when i use the command Smt1 and select Entry-->Authorization check -->Trusting system, it display logon to solman screen 2 times display the error message "Error when opening an RFC connection"
Entry-->Authorization check -->Current server, it display logon to solman screen display the error message "No authorization to logon as trusted system (Trusted RC=0)"
I have metion in previous message that i was maintain all the necessary authorization.
so please suggest me how to solve the authorization problem?
Thanks
Ganesh
Similar Messages
-
Error in Local Message System: No authorization to logon as trusted system
Dear all,
When I am posting the message in Production system which I have configured with my solution manager
I am getting the error like "Error in Local Message System: No authorization to logon as trusted system. So trusted message can not be posted"
I checked with SM59 which I created the RFC destination, in that i selected for both the system ie Solution manager as well Production system 'Trusted System=Y'
Please suggest me how to solve this issue
Regards
SudharshanHi,
please use the search function.
There are ALOT of topics regarding Trusted RFCs, table BCOS_CUST, RFC Back Destination to Sol Man and so on.
/cheers -
No authorization to logon as trusted system (Trust ed RC=0)
Hi Guys,
I am working in CHARM implementation and i am facing a problem while importing the transport request from development to quality system.
once i select the pass correction to test action in urgent correction the system is giving an warning message(No import into test system has taken place yet).
When i go to task plan there the system is showing the transport request is succesfully released, but Import transport request as RED.
Description of the Error: System cancel RFC destination SM_QASCLNT410_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=0).
But when i do the pass correctio to test with SAP_ALL in Quality system it is successfully importing to quality system.
I have also assigned S_RFCACL to developer role in quality system. kindly give ur valuable inputs as it is very urgent.
Thanks&Regards
RajuPenmetsa,
Interesting name - trusted connections are somewhat interesting to work with - please check them by using the 'Remote Logon' button with the username check set to current user (if you are using a specific user, there is no real reason to use a trusted connection). When doing this, follow OSS Note: 128447 which is all the troubleshooting for Trusted Connections with all the return codes.
From what you are showing with the RC=0, that is ususally authority - you probably don't have the role setup right on the QA system. Personally, I wouldn't bundle this because there are different flavors of this role that should be assigned to certain users. You should go check with your Security people for the best way to assign the proper credentials to end-users. A improperly configured S_RFCACL will allow one to access a remote system with a different userid!! Which is not really a good thing to have as a possiblity for daring developers that are looking for interesting things to play with.
Anyhow - hope that helps, if it answers your question, please set the thread to answered. -
SAP system not starting or not able to logon to SAP system
Hi All,
Our OS is AIX5.3
DB is Oracle 10.2
And the machine is in cluster for HA. Cluster is running fine.
I am starting SAP using startsap all, the command shows that database and all instances have been started successfully. But we are not able to logon to the system.
Following is the output of startsap command and dpmon command :
bash-3.00$ startsap all
Checking ARP Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
14:45:38 11.10.2008 LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - AIX v11.15 5L-64 bit 080317
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 286752) is already running .....
saposcol already running
Running /usr/sap/ARP/SYS/exe/run/startdb
Trying to start ARP database ...
Log file: /home/arpadm/startdb.log
ARP database started
/usr/sap/ARP/SYS/exe/run/startdb completed successfully
Starting SAP Instance ASCS00
Startup-Log is written to /home/arpadm/startsap_ASCS00.log
Instance Service on host sapprodail started
Instance on host sapprodail started
Starting SAP Instance DVEBMGS01
Startup-Log is written to /home/arpadm/startsap_DVEBMGS01.log
Instance Service on host sapprodail started
Instance on host sapprodail started
bash-3.00$
bash-3.00$ dpmon
dpmon=>sapparam(1c): No Profile used.
dpmon=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 110/237
bash-3.00$
Developer trace out put is as follows
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid ARP
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 295220
Sat Oct 11 14:46:22 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 295220) [dpxxdisp.c 1254]
shared lib "dw_xml.so" version 159 successfully loaded
shared lib "dw_xtc.so" version 159 successfully loaded
shared lib "dw_stl.so" version 159 successfully loaded
shared lib "dw_gui.so" version 159 successfully loaded
shared lib "dw_mdm.so" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapprodail_ARP_01 <
DpShMCreate: sizeof(wp_adm) 19200 (1600)
DpShMCreate: sizeof(tm_adm) 5941560 (29560)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
dev_disp (58%)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000000765020
DpShMCreate: allocated wall_adm at 0x700000000765028
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0x700000030000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
WLM Tag 'ARP/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( sapprodail) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >sapprodail_ARP_01 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Sat Oct 11 14:46:32 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Please help me step by step to solve this problem.
Regards
Edited by: Infoseek Sap123 on Oct 12, 2008 8:22 AMThe command is
dpmon pf=/usr/sap/SID/SYS/profile/<profile>
Regards -
my system logon failed .
i am not able to logon to my ides system. server is starting but while logging into the system by using user name and passward
the following error is coming
user account not in validity date
some other information is also available
logon to SAP system failed
the system description "NEW" cannot be found in the system list.
Make sure that saplogon.ini exists and choose an existing system description in the system list.
RegardsCheck with your Basis. Your account validity is expired. Ask them to increase the validity.
The INI also does not exist on your system. Take the file from Basis and paste it on your PC.
Arti -
No administration authorization in Change and Transport System in CHARM
Hi guys,
I am currently working for CHARM implementation for ECC 6.0
now my problem i created an urgent correction and i released the transport request successfully, but when i try to execute the Pass correction test action it is saying that No import into test system has taken place yet. then i went to task plan and checked there in quality system it is saying No administration authorization in Change and Transport System.
So i asked my basis team to assign the S_TMW_IMPORT profile to user TSADM in 000 client of quality system and additinally our basis team has assigned S_CTS_ADMI. authorization object to TSADM user ID in 000 client of quality system. But SAP has suggested to assign S_CTS_IMPALL and S_CTS_IMPSGL authorization profile to S_CTS_ADMI.
But the problem is S_CTS_IMPALL and S_CTS_IMPSGL authorization profile is not available in 000 client of quality system.
Kindly give your valuable inputs as early as possible. the solution provided by anybody will be rewarded with points.
Thanks&Regards
Rajucan you try assigning the below profiles to that ID.
S_TMW_OPERA
Operator in CTS (All Transport Authorizations)
S_CTS_ALL
Transport system: All authorizations
S_CTS_DEVELO
WBO: Profile for developers in P systems (incl. tasks)
I too have checked and i did not come across the profiles nor objects S_CTS_IMPALL and S_CTS_IMPSGL .
Where did u get the message that they have to be imported ?
Hope it helps.
Award points for the replies that are helpful to you.
Rgds,
Sri -
What is the transaction to see the Authorization objects in the CRM system?
Hello Guys,
Please let me know transaction code to see the Authorization objects in the CRM System?
Thanks in advance.
Regards,
VinayHi Nagur,
With T.Code SU21 you can see the Authorization objects in the CRM System. If you want to see Authorizaion object for a particular Transaction Code then the T.Code is SU24
Thanks & Regards
Shiva Vekat -
Transaction DB13 - ERR_SYSLOGON: Logon to operating system
Hello,
When we entering the transaction DB13 presents the following message which does not allow programming any Backups jobs.
DBMRFC Function : DBM_GETF
Command : DBAHIST DATE=20070421
Error : DBM Error
Return Code : -2
Error Message : ERR_SYSLOGON: Logon to operating system
Grateful for the help that can provide.
HEPChello again Natalia,
when we test the connection to DB in Tx db59 we found
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Unsuccessful
system_failure
Name and Server : DQA - conexcel
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : System Error
Error Message : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout al intentar establecer
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( DQA ) Successful
thanks
Hernando -
Restrict User Logon from multiple systems
I want to know how can I restrict a user logon from multi systems. That means user 'manager' must be connected to the server only from 1 client system at a time. Is it possible? If yes then how?
@VHNGhi,
I'm afraid this is not possible current versions,In future releases SAP will restrict 1 session for a user id,
For details Check it in SAP Business One 8.8 Central Information
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Jeyakanthan -
Hi,
While logging into MSS>Managing Services> Scorecard Reporting, I am getting below error:
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: you are not authorized to logon to target system (error code 21)
Kindly suggest what is problem.
Regards,
HoneyDear Honey Sachdeva,
Chekc the User id and password u used for JCO destination,test the JCO destination and check whether the user which u using got the read permissions on particular system which u might have created in system administration for MSS/ESS.
Regards,
Pradeep.B -
Customising logon page using System Administration functionalities
Hi all ,
Is it possible to customise the logon page of Enterprise Portal using the System Administration functions of the portal. If yes , could anyone please give me directions on how to go about it .Hi Tahzeeb,
Go through this simple e-learning class to see how to change the logon page through System Admin->System Configuration.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c43ee5f9-0701-0010-2ca9-d2ec4c804d86
Regards,
Prathamesh
P.S. PLz reward pts if found helpful -
How to display a specific SAP logon screen per system?
Hello,
I woud like to display a logon screen which contains system-specific information, e.g. for the QAS system it would be something like "This system was created by a system copy from PRD on MM/DD/YYYY"...
I have gone through the SAP Note 205487 and my understanding is that I have to create the ZLOGIN_SCREEN_INFO in the development (changeable) system and transport it.
Note 205487 : "Creating/changing this text requires a changeable system. Therefore, for production systems, SAP recommends maintaining the text in the upstream system and then transporting it."
Can anyone please provide me with some hints on how to create a different logon screen for each system and apply them via transport requests?
I prefer not to "open" the QAS system in order to create the logon screen because I would then have to "open" the productive system to create a different logon screen...
Any help is appreciated.
Thanks and Regards,
Michel M.Hi Michel,
Please refer to below documents for modifying SAP Logon screen and transporting to other system.
[How to customize the login screen|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22219]
[Customizing SAP Login Screen|http://www.abap-tutorials.com/2009/12/30/customizing-sap-login-screen/]
[SAP logon screen, SE61, ZLOGIN_SCREEN_INFO|SAP logon screen, SE61, ZLOGIN_SCREEN_INFO;
Hope it helps
Regards
Arun -
Authorization error when exporting business system
Hi ,
I am on XI 7.0 spo9.I am trying to transport from dev to qa .
I am able to easily export (login using xisuper ) Technical system.
However while exporting Business system .when it gives me to download a file I get an authorization error .
Kindly helpHi,
Check XISUPER has the below roles in SU01.
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_ORGANIZER
SAP_SLD_GUEST
add the above roles for XISUPER and get the green color those roles using Tcode : PFCG.
The above roles should be in green color.
Regards,
Venu. -
Easy Document Management crash when logon to the system
Hello gurus.
I have a problem with SAP Easy Document Management.
I double-click on the icon of SAP Easy Document Management I get the SAP logon window, then enter the username and password and then click on "Access the system."
It seems that explorer.exe is trying to connect when I get the following error message:
Microsoft Visual C + + Runtime Library
Runtime Error!
Program C:\WINDOWS\explorer.exe
This application has Requested the Runtime to terminate it in unusual way. Please contact the application's support team for more information.
My system is Windows XP and the version of SAP Easy Document Management 7.0.6.1 (Unicode).
Lots off thanksHi,
we have also the similar problem with Windows 7 and EasyDMS 7.1.4.2. The Explorer crashes the first time when you try to login after starting the PC. When you then restart the Explorer and try a second login it will be successful and EasyDMS works fine all day. If you restart the PC the Explorer crashes again when you try the first login.
We have no crashes under Windows XP with EasyDMS 7.1.4.2 !
The problem of this issue is found by SAP and the solution will be implemented in the upcoming EasyDMS 7.1 SP05.
Meanwhile on our Windows 7 PCs following workaround is working for us and prevent us from the crash problem:
We add on all Windows 7 PCs to the environment variable "Path" the entry ";C:\Program Files\SAP\EasyDmsInterface\Unicode".
And there are no crashes anymore.
I hope this will help you or others which have similar problems.
Best regards
Frank -
Dear All;
I am in the post activities of SAP system refresh.
I restored the system using brtools successfully as you can see below:
then I went with the rest of the steps based on sap recomendations, and reached to SAP sql queries:
CREATE USER "OPS$<DOMAIN>\<SID>ADM" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
CREATE USER "OPS$<DOMAIN>\SAPSERVICE<SID>" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\<SID>ADM";
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CREATE TABLE "OPS$<DOMAIN>\<SID>ADM".SAPUSER (USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$<DOMAIN>\<SID>ADM".SAPUSER VALUES ('SAPSR3', '<Password>');
CREATE SYNONYM "OPS$<DOMAIN>\SAPSERVICE<SID>".SAPUSER FOR "OPS$<DOMAIN>\<SID>ADM".SAPUSER;
CONNECT /
GRANT SELECT, UPDATE ON "OPS$<DOMAIN>\<SID>ADM".SAPUSER TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CONNECT /as sysdba
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\<SID>ADM";
I checked if all users are on opened state using select USERNAME,ACCOUNT_STATUS from dba_users;
The database is running file, and it is opened, but when I run R3trans -d it gives me RC 12 and i get this error:
*** ERROR => CONNECT failed with sql error '1017'
set_ocica() -> SQL error code 1017
-->oci_get_errmsg (con=0, rc=1017)
OCIErrorGet -> SQL error code: 1017
ORA-01017: invalid username/password; logon denied
DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB
***LOG BY2=>sql error 1017 performing CON
***LOG BY0=>ORA-01017: invalid username/password; logon denied
I used brconnect -u / -f chpass -o PSAPSR3 -p sap so i can reset the password, but still I am getting the same invalid username or password error.
I checked the listener status, and it is running.
Kindly let me know how I can fix my error
Best Regards
~Amal AlounDear Gaurav;
I am running SAP Kernel 720 64bit unicode PL300
The content of my trans log file is the following:
4 ETW000 r3trans version 6.23 (release 720 - 15.05.12 - 20:12:03).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.08.2014 - 17:50:30
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Tue Aug 05 17:50:30 2014 149 0.000149
4 ETW000 [ dev trc,00000] db_con_init called 27 0.000176
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used 41 0.000217
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 28 0.000245
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 14 0.000259
4 ETW000 [ dev trc,00000] Loading DB library 'dboraslib.dll' ... 44 0.000303
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 000007FEF1650000
4 ETW000 947 0.001250
4 ETW000 [ dev trc,00000] using "E:\usr\sap\TST\SYS\exe\uc\NTAMD64\dboraslib.dll" 18 0.001268
4 ETW000 [ dev trc,00000] Library 'dboraslib.dll' loaded 19 0.001287
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dboraslib.dll 23 0.001310
4 ETW000 [ dev trc,00000] Version of 'dboraslib.dll' is "720.00", patchlevel (0.215) 242 0.001552
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dboraslib.dll 26 0.001578
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dboraslib.dll 34 0.001612
4 ETW000 [ dev trc,00000] New connection 0 created 237 0.001849
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 56 0.001905
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 20 0.001925
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 25 0.001950
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 16 0.001966
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 36 0.002002
4 ETW000 [ dev trc,00000] -->DbSlConnect(vers=-1, type=0, env='[default env]', userid='[default usr]')
4 ETW000 53 0.002055
4 ETW000 [ dev trc,00000] DIR_CLIENT_ORAHOME is not set as profile nor env. parameter. 574 0.002629
4 ETW000 Assuming using instant client with unspecified location.
4 ETW000 [ dev trc,00000] Register application info. 97 0.002726
4 ETW000 [ dev trc,00000] Oracle client version: 10.2.0.4.0, (dbsl 720 220612, UNICODE[2]) 10033 0.012759
4 ETW000 [ dev trc,00000] Detailed Oracle client (patch) info not available. 30 0.012789
4 ETW000 [ dev trc,00000] Default connection: tnsname ='TST' 73 0.012862
4 ETW000 [ dev trc,00000] -->oci_initialize(con=0, char='UTF16', nchar='AL16UTF16', nls=-1),uc_ln=2
4 ETW000 50 0.012912
4 ETW000 [ dev trc,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000 1828 0.014740
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=027944B0) 58 0.014798
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=02796088) 36 0.014834
4 ETW000 [ dev trc,00000] NLS env. settings: lang=41004D00450052004900430041004E00 167 0.015001
4 ETW000 [ dev trc,00000] terr=41004D0045005200490043004100 29 0.015030
4 ETW000 [ dev trc,00000] char=55005400460031003600 22 0.015052
4 ETW000 [ dev trc,00000] Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
4 ETW000 43 0.015095
4 ETW000 [ dev trc,00000] charset='UTF16', ncharset='AL16UTF16', UNI_ASC=FALSE 19 0.015114
4 ETW000 [ dev trc,00000] Logon as OPS$-user to get SAPSR3's password 28 0.015142
4 ETW000 [ dev trc,00000] Connecting as /@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000 61 0.015203
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_SVCCTX, con=0, svchp=02795F48) 370 0.015573
4 ETW000 [ dev trc,00000] Allocating server context handle 31 0.015604
4 ETW000 [ dev trc,00000] Attaching to database server TST (con=0, svchp=02795F48, srvhp=0279EFF8)
4 ETW000 74 0.015678
4 ETW000 [ dev trc,00000] Assigning server context 0279EFF8 to service context 02795F48 30008 0.045686
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_SESSION, con=0, usrhp=027ABBE0) 86 0.045772
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='/', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000 40 0.045812
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 28164 0.073976
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 95 0.074071
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 39 0.074110
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 38 0.074148
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 19 0.074167
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 20 0.074187
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 57 0.074244
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 39 0.074283
4 ETW000 [ dev trc,00000] Info: 99=DBSL_ERR_DB, oerr=1017, try to connect with default password.
4 ETW000 38 0.074321
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000 30 0.074351
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp= 027ABBE0 23 0.074374
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=027ABBE0 36 0.074410
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000 133 0.074543
4 ETW000 [ dev trc,00000] Tue Aug 05 17:50:40 2014 9992977 10.067520
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 33 10.067553
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 85 10.067638
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 37 10.067675
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 29 10.067704
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 19 10.067723
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 18 10.067741
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 55 10.067796
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 52 10.067848
4 ETW000 [ dev trc,00000] DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB 22 10.067870
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 1017 performing CON 58 10.067928
4 ETW000 [ dblink ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied 22 10.067950
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TST'"
Best Regards
~Amal Aloun
Maybe you are looking for
-
Why are my iCal menus disabled?
I am having troubles with iCal. Most of my menus are disabled: iCal > File > New Event iCal > Edit > cut, copy, paste, delete, select all, duplicate, iCal > View > by day, week, month year, Go to date ... to name a few. I find the iCal > Edit > copy
-
I recently bought a new camera but foolishly did not set the date/time. I have now set this function but alot of my photo's dates are off. I want to change the date/time, but I don't think I want to do a "batch date change" because I want all the dat
-
Appreance of Document structure
Hi Gurus, My client is asking to suppress the document structure appearence which is in the DIR screen, where i could suppress Hierrarchy, CAD interface but iam unable to hide Document structure. Kindly get me the solution for this. Regards Kannan
-
Another user allegedly logged on to my iTunes
When I try to connect my iPod to my PC I receive a message is telling me that there is already someone using my iTunes software and therefore it cannot recognize my iPod. It asks me to "please ask the other user to log out". Well, there is no other u
-
New Macbook Pro Retina - Keeps freezing...
Picked up the brand new Macbook Pro Retina on Tuesday. Great piece of kit, however I have found the system has frozen a couple of times now meaning I have to reboot by holding down the power key. Any advice? Obviously not what I would expect from a £