Authorization to particular group of users

Hi
I have an application with two different groups A_super_user and B_user.
I question is how to create authorization to my different user groups.
When my report shows up it shows all records. What I want to achieve is to show only certain rows to B_user group and show all records to A_superuser.
Can anyone please help me to achieve this functionality to my report.
Thanks in advance.

Hi,
Thanks for your prompt response.
In that application it only shows how to apply authorization at item level.
But I want to place the authorization at record level.
In that app it shows:
create a authorization scheme and place that scheme by clicking authorization tab on each level of item.
But how could I achieve it place on the query level.
Show certain type of records if that user is employee and all records to manager.
We need to place on query level.
Ex: If there are 10 records on that report. It should show all records for the manager, but only 6 records to employees
My situation is something like this.
Thanks.

Similar Messages

  • Digital Signature - Setup User master record for Particular group of user

    I already setup Electronic signature for RR and UD. but having problem to complete transaction.
    When a Digital signature is executed, the system should copies the signatory name from the user master record to the signed document. However, the name has not been maintained completely in user master record and for this reason, i cannot execute the signature. So how can i setup User master record for Particular group of user?
    Regards,
    NP

    It is actuly comes under QM module to save the test record, but before saving it, we need to have authorization.
    For authorization, we are having digital signature.
    So i need to assign user group for particular those authorization digital signature. so i thought, might be IDM can help on that?
    How would i do that? so are you guys able to help me on that ?
    Thank you
    NP

  • Notification mail for particular group of users

    Hi,
    How to configure notification mail for particular group users in the portal, some circular posted in the KM.
    Please advise.

    Dear  kumargopalc,
    The best way to do this, is create a folder in km where you upload your files o news to this user and then create a km navigation iview to give to the user the possibility to subscribe to it, the service subscription give to the users notifications on the amendment of the folder.
    http://help.sap.com/saphelp_nw70/helpdata/en/6e/798e04b33b11d5993800508b6b8b11/frameset.htm
    Regards.

  • Unable to fetch task assigned to particular group from user

    Hi,
         I am usinf BPEL 10.1.3.0. The BPEL is configured to use the Oracle Infra as directory server for providing identity service.
         I have a two group created in oid by name AdminRole and TestRole.Have a one user assigned to each group.
         If i create a new user and assigned to both the role, so any task created for both the group will be visible to new user.
         But this is not happening the new user is not able to view any task assigned to AdminRole or TestRole.
         Any Help Apprecited.
    Regards,
    Bhavik

    Hi Dasaradh,
    If earlier issue (Pop message with 60) is not resolved, then it means your Service Constructor is old one. You will see this pop error message when you have more than 60 records to be fetched. The service solution component tables's maximum capacity was 60 only. We fixed the issue later.
    So if you still see this issue, I would suggest you to update your service constructor.
    For later issue [(Unknown Source)Error: Extension ID oracle.aia.codegen.codegenwizard in extension.xml does not match jar filename oracle.aia.aiaserviceconstructor], it looks like your Service Constructor install is not successful.
    Thanks
    Vikas
    Edited by: user10866611 on Nov 24, 2010 3:15 AM
    Edited by: user10866611 on Nov 24, 2010 3:16 AM

  • User SIMPCDIA has no RFC authorization for function group BBPC

    Hello all, I am working with SRM 7.0 and when I try to list all account values in the corresponding matchcode, I have this error message:
    User SIMPCDIA has no RFC authorization for function group BBPC
    User SIMPCDIA is a dialog user created in backend system with authorization objetc S_RFC. I don´t know what is the problem...
    Can you help me please?
    Thanks in advance
    Rosa Rodríguez

    Try testing with a user that has the 'SAP_ALL' profile
    OR
    see if below link is helpful to you.
    [Probable Solution|http://www.sapkb.com/question.php?ID=10]
    Edited by: Saurabh Agarwal on Sep 1, 2010 11:59 AM

  • To restrict a object to a particular Group in the Universe

    Hi,
    I have a object which should be restricted only to a particular group.So when i define the universe we have to have explicit security that will restrict access to this object information from reports and from ad-hoc queries.I should restrict the object only to the particular group by a role based security.
    Please help me out in this case.
    Thanks in advance,
    Madan

    Hi Madan,
               U can restrict the Object to Particular group or User
    In designer go to tools menu and click on manage security and
    manage security restictions here u can add new restriction and
    as well as add user or group.

  • Has no RFC authorization for function group ZRFC_XI

    Hi All,
       I have a scenario where I am calling RFC inside the BPM.  When I execute I got the errror as
    User SKXXXXX has no RFC authorization for function group ZRFC_XI
    I have gone though the form
    no RFC authorization for function group RFC2
    User abcd has no RFC authorization for function group SYST
    and I understood that  we need to set authroization object S_RFC with RFC_TYPE = FUGR, RFC_NAME = SYST and ACTVT = 16. I think we need to set this to XIISUSER and the password and for PI7.0 user PIISUSER and its password
    But not able to understand where we need to do this activity.  I request you to kindly let me know how to assign this object... do we need to assign in SAP system or in XI system.  please help me out on this problem.
    Regards,
    Dhill

    Dhil,
    I never worked on these stuffs. But I found some useful stuff ,I think surely it will help u.
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/please-how-to-create-an-authorization-object-386391
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
    Best regards,
    raj.

  • UWL:User  has no RFC authorization for function group SDIFRUNTIME .

    Hi,
    In portal, while registering the system in UWL , I am getting this error:
    (Connector) :com.sap.mw.jco.JCO$Exception:User <userid> has no RFC authorization for function group SDIFRUNTIME .
    I have given the permission to the user id as owner for the system, with which I am logged in, and registering the system.
    It is also confirmed, that in the backend, the same user has authorization for the said RFC.
    Please help as it is urgent.
    Thanks,
    Sonali
    Edited by: Sonali M S on May 30, 2008 6:32 AM

    Hi Sonali,
           If your component is a webdynpro component, back end system is accessed via a logical system / JCO Destination. User id ( Lets say JCOUSER) and password is given for accessing backend via this JCO connection. This user id is different from particular user's backend user id. Verify whether JCOUSER has required authorizations in backend.
         I hope it helps.
    Regards,
    Uday.

  • IDOC Scenario - User  has no RFC authorization for function group EDIN

    Hi all,
    I'm trying to configure an IDOC scenario from ECC to XI.
    RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
    Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
    Thanks for your help.
    regards.
    Roberti

    Hi,
    Check with PIRFCUSER user , that is having the right authorization or not ..
    And make sure that this user is present in the system & it should  not locked.
    to check that user is present or not-----goto su01 of the system & check
    Regards
    Seshagiri

  • User has no authorization for function group SWRS

    Dear SRM Gurus,
    We are facing an issue u201CUser has no authorization for function group SWRSu201D.
    Hope the user has no authorization to access function group SWRS and this function group is saying that workflow substitution.
    Can you any one have any idea what scenario are we using Workflow substitution?
    Is there any Roles need to be assigned?
    I would be appreciating if you could let us know more detail on this.
    Thanks.
    Regards,
    Magesh Basavaraj.

    Hi,
       The authorization object is 'S_WF_SUBST' for substitute role..try to assign this object and check..
    Saravanan

  • User has no authorization for Function group SYST

    Hi,
    We are starting to make customisation to B2B application. I have just created a new project for B2B_XXXX application and deployed it on the server. When I run this custom application, I am not able to login using the same user that is working fine for the standard B2B application.
    Following is the error I am getting
    ERROR 1 - RFC_ERROR_LOGON_FAILURE: User INTUSER05 has no RFC authorization for function group SYST
    ERROR 2-  The application was not able to switch to a stateful connection......
    Strange thing is that the same user works very well for standard B2B.
    Any clue? All I have done is created a CUSTCRMPRJ for B2B ERP (SHRWEB, SHRAPP). Please help.
    Best regards,
    -Tarun
    Edited by: Tarun Bakshi on Nov 10, 2011 7:37 PM

    Hi Shanto,
    The problem is still occuring. Even If I give s_rfc authorisation the order is not being created.
    I compared the source code for b2b and b2b_custom application, I have pasted below the component info
    sap.com      CORE-TOOLS      7.00 SP14 (1000.7.00.14.0.20071210170909)      SAP AG      SAP AG      20080125132852
    sap.com      SAP_JTECHF      7.00 SP14 (1000.7.00.14.0.20071210172424)      SAP AG      SAP AG      20080125132853
    sap.com      BASETABLES      7.00 SP14 (1000.7.00.14.0.20071210170411)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEECOR      7.00 SP14 (1000.7.00.14.0.20071210172300)      SAP AG      SAP AG      20080125132852
    sap.com      JLOGVIEW      7.00 SP14 (1000.7.00.14.0.20071210160700)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEE      7.00 SP14 (1000.7.00.14.0.20071210172039)      SAP AG      SAP AG      20080125132853
    sap.com      SAP_JTECHS      7.00 SP14 (1000.7.00.14.0.20071210172719)      SAP AG      SAP AG      20080125133813
    sap.com      BI_UDI      7.00 SP14 (1000.7.00.14.0.20071210170522)      SAP AG      SAP AG      20080125133909
    sap.com      BI_MMR      7.00 SP14 (1000.7.00.14.0.20071210170459)      SAP AG      SAP AG      20080125133230
    sap.com      UMEADMIN      7.00 SP14 (1000.7.00.14.0.20071210164800)      SAP AG      MAIN_APL70VAL_C      20080125140341
    sap.com      LM-TOOLS      7.00 SP14 (1000.7.00.14.1.20080124101556)      SAP AG      MAIN_APL70P14_C      20080125134809
    sap.com      SAP-SHRWEB      6.0 SP0 (1000.6.0.0.2.20080129095806)      SAP AG      MAIN_CRM70PAT_C      20110608153828
    sap.com      SAP-SHRAPP      6.0 SP0 (1000.6.0.0.2.20080128172843)      SAP AG      MAIN_CRM70PAT_C      20110608154506
    b2b_custom application has been created by using code from the following SCs that were added to the track
    SAPSHRWEB10_7-20003522.SCA
    SAPSHRAPP10_7-20003520.SCA
    SAPCRMWEB10_7-20003518.SCA
    SAPCRMAPP10_7-20003516.SCA
    SAPCRMDIC10_0-20003519.SCA
    STRUTS01_0-10003646.SCA
    SAPIPCMSA10_0-20003515.SCA
    SAPCRMJAV10_7-20003517.SCA
    SAPSHRJAV10_7-20003521.SCA
    TEALEAF00_0-20001451.SCA
    SAPBUILDT14_0-10003479.SCA
    Any help would be great...

  • UWL  : User J2EE_ADMIN has no RFC authorization for function group SYST

    Dear All,
    When I am trying to register the system in universal Worklist Administration, It gives the following error,
    System <>: Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc  eption:Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
       I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody  through some light on this....
    Helpful tips will be rewarded...
    Sanoj

    Sanoj,
    check these threads
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
    reward points if helpful

  • QM-IDI : User QMIDI has no RFC authorization for function group QIRF

    Hi,
    I am in the process of trying to connect from Labware LIMS to SAP ECC 6, specifically the quality module. The aim is to use Labware to connect to SAP via the QM-IDI interface to
    1) Download inspection lots from SAP
    2) Upload usage decisions and inspection lot results to SAP.
    Initially I specified an account on SAP of the type 'Communications Data', however any time I tried to connect to SAP from LIMS via the interface with this account it gives an <i>'Incorrect Username/Password'</i> error in the trace logs. I then changed the account to a dialog user, which seems to be partially more successful, however the trace logs captures the following error 'User QMIDI has no RFC authorization for function group QIRF' when I try to connect from LIMS to SAP via the QM-IDI interface after changing the user to type dialog.
    I would appreciate any guidance on how to resolve this issue.
    Regards.

    i got stuck on configuring idi. plz guide me. bond_chaitu at yahoo dot com

  • UWL: User MSSNO1 has No rfc authorization for function group SWK1

    Dear all,
    We have just recently upgrade our support pack and the UWL in the portal is not working anymore. It throw an error message when we click on the work item.
    (connector): com.sap.mw.jco.JCOSE Exception:User MSSNO1 has No rfc authorization for function group SWK1
    Anyone know how to fix this?
    I am not too sure about the authorization part. Can someone guide me please?
    Thanks.
    Regards,
    Bryan.

    Hi Brain,
    Pls check this thread for solution
    Re: UWL and function group swk1
    Regards,
    Harini S

  • User PI_JCO_RFC has no RFC authorization for function group ERFC

    I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
    I have done all the configurations on XI and R/3 end.
    When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
    But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
    From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
    Please advise.
    Thanks
    Shiva

    Hi,
    Try to add the following authorization object to the role(s) of the RFC user:
    S_RFC
    Set the following authorizations:
    RFC_TYPE = FUGR (function group)
    RFC_NAME = <name of the function group containing the BAPI>
    ACTVT = 16 (execute)
    Regards
    Seshagiri

Maybe you are looking for

  • Read only Automation

    Hi All, Im looking for some help in regards to making a PDF file read only. basicaly what we want to do is add a signature not a digital one but a wet one to a document then have a button or something that can then restrict access (read only ) and th

  • Voting disk problem

    I had a problem with my votingdisks: First CSS would not start. CSS log said votingdisks were missing: C:\oracle\product\10.2.0>crsctl query css votedisk 0. 0 \\.\votedsk1 1. 0 2. 0 located 3 votedisk(s). I stopped the cluster and could add my voting

  • Merge 3 edits of same picture

    I have a picture I'd like to edit to enhance different areas of the photograph and then merge them into 1 resulting picture.  Is there a good tutorial on how to do this in PS CS4?

  • Compiling a frequently accessed Stored Procedure

    RDBMS version :10.2.0.4.0 in a 2 node RAC Our Production DB is 24x7 . Our development team has made a change in a frequently accessed Procedure's code. At any given time this Stored proc is accessed by at least 5 sessions. I have been asked to compil

  • Where do I find my Applecare + Information?

    Last week I went to the Apple Store and purchased Applecare + for my week old iPhone. I was a bit nervous about walking out of the store with no physical proof that I had just purchased the warranty. The rep said it would be mailed to my email addres