Authorization to query and web template in BI 3.5
Hello
I need to grant users athorizatio to the WEB template and its query. Query is based on Multiprovider.
Should I save query and WEB template to existing role and grant authorizaion to tis role or I also need to grant authorization to multicube and all cubes underneath?
Thanks
Hi,
You need to assign two objects for authorizing web templates and query..
S_RS_COMP AND S_RS_COMP1... in both these object you need to assign appropriate roles and activities.
S_RS_MPRO object to assign authorization to MP.
Regards,
Anup
Edited by: Anup Chaudhari on Dec 3, 2009 8:42 AM
Similar Messages
-
Variance Scaling in Query and Web Template Showing Different Results
Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM -
Filters Query and Web Template
Dear All,
Many reports use filters in both the query and the web template. What
is the difference?
Regards,
KSthe filter used in query and web templates are same
there is no difference between filters used.
as webtemplate uses the same query as its data provider so it is going to run the same filters.
for e.g. if u have query x then if there are filters in it .
if u have webtemplate y , and u have to assign a data provider to webtemplate which is nothing but query itself....
so if u run webtemplate u will at the end execute query x only...
now wat is filter.
filter means it will filter out that data.
for e.g. if u created a variable for calendar month and u restrict it so that user can enter the calendar month value range when they execute query x....
then if u execute query x
then upon its execution the variable will pop u p and it will ask u to enter range of calendar months
lets say u enter 1/2007-12/2007
so u r query executes and it will only bring data for year 2007.
now if u wish to see the data of 2006 and try to restrict it in Context menu or Restric screen, then it will display as NO DATA.
this means it will filter the data for particular year.
so if u wish to see the data for all years
then dont create variable and dont restrict Calendar month
Instead bring calendar month in Free characteristics
so later u can run the query for different years.
i hope u understand -
IE error of query and web template
Hello experts,
We had completed the configuration of " Integration into Portal"
successfully.
Query and web template can execute successfully via "Execute" button.
After click "Execute" button, query or web template display the result
in IE.
And we can use right-click menu to do all of operation at beginning.
But after we click the right menu a few times, it will occure error.
The error information as follow:
Line : 8914
Char : 2
Error: 'initMenus[...].windowHeight' is null or not an object
Code : 0
URL : http://jt-
pldev.gnpjv.cgnpc.com.cn:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Is there any solution? Thank you.
Best Regards,
Chen Jianguosame here.
Internet Explorer 7, web templates or web analyzer:
1. open context menu with right mouse key
2. click on a free area outside the menu, to close the menu
3. opening the menu do not work anymore. buttons do not work anymore either.
searched notes, sdn, ... patched all to the newest level...
still the same error. -
Query related to BEx query and web template migration
Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun. -
Checking Query and Web Template Authorizations
Hi, I have some code that does an authority-check to determine if a user has access to a specific query.
AUTHORITY-CHECK OBJECT 'S_RS_COMP'
ID 'RSZCOMPID' FIELD '__________'.
I need to be able to test to see if a user has access to a specific Web Template.
Any ideas how to do this?
Thanks!Kenneth,
1. Find the roles a template is assigned to : Yes, use AGR_1251 table.
2. Find the roles a user is assigned to : Yes, use AGR_USERS.
3. check if the user has the role the template is assigned to? by joining both the tables.
By using these tables, programatically you can check it.
You cannot check this using C-Command AUTHORITY-CHECK OBJECT. As this checks only the authorizations for the user who is executing it. This command is more useful in the following scenario.
Eg.In BW if you have written a program for some reasons to read the values of an ODS active table. On this ODS you have authorization relevant infoobject. Lets say profit center. In order to check the profit center that the user is assigned to and populate the data for only profit centers for which he is eligible to view the data.
Hope this helps,
GSM. -
Hi,
i have created a query on YTD sales query and comparison with the previous year. i have created a structure using 0calmonth2 info object and restricted it for each month starting from July to June. In the key figures i have used sales values key figure and restricted one with variable 0I_PRFYE for all fiscal year periods of previous year and for the current year i used a value range from 001.YYYY to the current fiscal year period. where YYYY is the same fiscal year as in current fiscal year period.
After executing the query for sales values in previous year i have a value against every fiscal year period in the previous year. For the current year i have the value only for the first month as we are in the first month.
example:
jul aug sep oct nov dec jan feb mar apr may jun
Current year 17 0 0 0 0 0 0 0 0 0 0 0
Previous Year12 13 18 34 23 67 20 10 83 34 25 27
When i creating a line chart based on this data, for the current year the line drops from jul to aug and continues to be zero through out the year. what i am expecting is it should not drop to zero as we have not yet come to aug in the current year. What i am expecting is that the line should be showing as a dot in the current month jun, when the current fiscal year period is aug i will have some value in the aug so the chart should show a line from jul to aug.
I tried to change the display of zero's as blank & even tried replacing zeros with some characters but could not achieve the desired result.
can some body help me achieve this. Correct responses will be awarded appropriately.
Regards,
Ravi.Hi,
The line chart shows the two series one for previous year and one for current year.
the issue is with current year. as the value for aug is blank the line chart drops to zero on the y axis. What i want to achieve is that as i am not yet in aug and my current fiscal yera period is jul i dont want the line to drop to zero. in this case i want it to be just a dot on y axis depending on the value. Once my current fiscal year period is aug i want a line from jul to aug only. In the current senario if my current fiscal year period is aug i will have the line from jul to aug but then drops to zero on y axis for sep. I dont want that to happen.
Hope iyou understand what i am trying to explain.
Thanks for your reply.
Ravi. -
Query designer report and Web Templates
Dear All,
I have a very basic/stup doubt.
Are reports made through Bex Query Designer and Web Templates the same?
Actually there is a following requirement:-
"Navigate from a BW Web template to a PCUI application". I have a document related to it but it gives me step on how can i modify my web templates to achieve this functionality. But all my reports are made through query designer and it available to user through Web Dynpro portal.
So i just wanted to know is Web Template and Reports made through query designer the same? So that i can implement the changes in my report.
Thanks.Hi Anup,
by using web templates we can use N number of data providers (Queries) for a single analysis view with various available options. - N number of Queries can be assigned to Web template to create a web report
but by using the Query designer ,you can create a single report which may not provide sufficient information to the client and the number of features are less compared to web template.
as you mentioned that you are using the web dynpro.
i think the web dynpro requires the web reports as an iview and ths iview can be created by using the Query designer and or web app designer.
so the most clear view can be given to client using the WAD reports -
Migrating queires and web templates
Hi All
We have just upgraded our front end and are now thinking about converting/migrating the queries and web templates etc.
1: We havent done our dataflows yet as we will do these later. Does anyone know of any possible problmes of dojng the queries/templates but not the datalows?
2: Does anyone have a 'best way of doing the queires and templates...eg. what order?...All at once? ...One by One?
3: What are the tools to convert them all in one go for web templates and queries
Any other useful info would be helpful
GoawatsonGo though these links it would be of help.
Upgrading Bex Queries from BW3.5 to BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
Process of Migration
�� Save Query with SAP NetWeaver 7.0 BEx Query Designer
�� Query object itself will always get new version
�� Reusable Query components (structures, key figures, variables) will get
new version only if required -
How to assign a query and a template to a role
Hi gurus
Considering my little knowledge that i have of BI 7, I just want to confirm is this the way to assign a query to a role.
On the main menu of the query designer at the top left we have query-->Publish--->to Role and subsequently assigning the query to the specific role required and similar steps are followed to assign the template to the same role as well...kindly confirm this.........as i guess it is important to assign the query and the template to a the correct role so as to get the correct data.As our query is created for the manager role....points will be givenHi Anurag,
Check this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a249a990-0201-0010-e18e-b2f5ed135497
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a101b894-0b01-0010-6c90-e70766b33256
Roles assigned to a BI 7.0 Consultant
Role assigning to a Query in BEX report
Assign points if this is helpful...........
Rgs,
I.R.K -
BEx Web Template (BTMP) and Web Template (TMPL)
Hi,
I found in BI7 Objects, there are BEx Web Template (BTMP) and Web Template (TMPL). what's the different between them? For the BEx Web Template (BTMP), i can find in Web Application designer.
But for Web Template (TMPL), I cannot find them in Web Application designer. How can I edit them?
for example, there is a standard Web Template (TMPL) 0tpli_0tct_mc01_q0111, where can I change it?
Many Thanks
Jonathanhello,
TMPL is for 3.5 template and BTMP is for BI 7.0 templates. For opening 7.0 template you need to use BI 7.0 WAD not 3.5 WAD.
you can open the standard template 0tpli_0tct_mc01_q0111 in WAD and then do save as to save it custom template.
Then you can edit the custom template and make the changes.
Make sure that the std. template is installed correctly.
Regards,
Dhanya -
BI Authorization problem query in web
Hello Guru,
i have authorization problems to execute query on the Web.
When i try to execute query on web i have these messages:
- Missing display authorization msg R9 108
- Missing authorization to execute query msg R9 108
- User doesn't have authorization for selected component
Component selected can not be executed
Contact person responsible for the authorizations if user need authorization to execute this component
Function is checked with object "Business explorer - components" with these fields:
- InfoCube ZSD_007
- Component type ERP
- Component ZTEST_SD_007
- Activity 16
Message number BRAIN 800
In BI i have add to my usere all these profiles and role, but the problem still again:
Profiles:
SAP_ALL
S_A.SYSTEM System administrator (Superuser)
S_RS_ADMWB_A All Administrator Workbench Authorizations
S_RS_EXPL_A All Business Explorer Authorizations
T-BS590005 Profile for role Z_RS_RREPU
T-BS590006 Profile for role Z_RS_RREDE
Roles:
SAP_BW_CFO_ADMIN
Z_RS_RREDE (copy from template RS_RREDE)
Z_RS_RREPU (copy from template RS_RREPU)
I can not understand if this problem is related to BI authorization or maybe something in Netweaver
please help me
Kind regards
BorisHello,
i can execute query from transaction RSRT, anyway also from this transaction when select "ABAP WEB" , web page is open but i have same authorizations problem.
In transaction SU53 seems everithing correct (i have all authorizations) .... this is probably becouse my problem is in Portal or netweaver side and not in BI ???
any suggestion?
Thanks in advance
Boris -
How to use a query in Web template
Hello i have really a very silly question.
How can i use a Query that is already defined by BEX into a Web template so that i can set up simple properties like changing colours of Row as well as avoid Tab pages.
I logged into a Web template.
Can any provide step by steps.
Please helpNo questions is silly, doubt is always a doubt and clarifying the same is the best way to deal with that.
Anyway philosophy apart and coming to business.
1) created the query in Query designer, say Zquery1
2) logon to WAD.
3) for assigning Zquery1 to WAD template, you haev to decide how you are going to use Zquery1 in WAD.
4) for ex: you want to display the query result and also a graph based on that result.
5) So we have to drag drop Chart and table in WAD.
6) create dataprovider and assign zquery1 to this dataprovider.
7) save and execute.
For chanding the colors, under properties, we will have many stylesheets delivered by SAP. Yiou can choose anyone on this which suits to your requirement. If not, then edit the stylesheet and code it as per your need.
Hope this helps. If yes, please assgin points.
Regards
Pankaj -
Long Query Runtime/Web-template Loading time
Hi,
We are having a very critical performance issue, i.e. long query runtime, which is certainly not acceptable by client as well.
<b>Background Information</b>
We are using web application designer (WAD) 2004s release to design front end of our reports built in BI 7.0 system.
<b>Problem Area</b>
Loading of web template on browser
<b>Problem Analysis</b>
Query taking so long time to run, whenever we load it through portal or even directly through web application designer. Current runtime for query is more than a min. And I have noticed that 95% of runtime is taken for loading variable screen. FYI if I run query through Query Designer or BEx Analyzer, it takes 3-5 seconds to execute.
We have taken all the statistics and everything proves that query is not taking any time to execute but its the loading time which creates bottle neck.
<b>Possible Cause</b>
Web template holding 11 data providers, 5 of which are based on queries and rest are on query views. These data providers load into memory in parallel which could cause delay.
These data providers expose detailed variable screens. Out of 21 input fields, exposed by web template, 8 fields are based on hierarchy node variables and 1 on hierarchy variable. And to my knowledge each time hierarchy/hierarchy node variable loads complete hierarchy into memory whenever they are called (in other words, its not performance efficient to use hierarchies).
I request you to please consider this as matter of high priority and provide me with suggestions to remove bottle necks and make the application performance efficient. Please let me know, if you need any further information.
Thanks.
ShabbarI would recommend you see how long the query execution actually takes without running from the web template. If actually the individual query takes long time then you need to do some performance improvement on back-end side (aggregates, indexing,... and so on).
But the performance issue is only with web templates, then you need to find some notes on it, because, I remember we had to apply some notes in relations of browser taking too long time to load the selection screen in web reports.
After exhausting all the option, then I will implement precalculating the query result before hand using broadcaster.
thanks.
Wond -
Hi Gurus,
I am working on web reporting, we have a bunch of web queries that are working fine. And now my client wants to explore the possibility of displaying ABAP Queries on the web or embed them in Web templates along with the alreaday existing bw queries.
Please point me in the right direction, is it possible ?are there any documents or links that explain this ?
thanks
rajHi Raj,
You have several possibilities.
a) Just replace ABAP-Queries with BW-Queries (but the customer does not want that, I assume )
b) Explore the possibility of a Remote-Cube
c) Create a BSP, where you execute and render the ABAP-Query Data and show this BSP in an iframe in your WebTemplate
These are some possibilies.
Best regards
Frank
Maybe you are looking for
-
How do i cancel my credit card from my apple ID?
My iPhone got stolen, i reported the IMEI number and all, but they told me is still usable like an iPod. I want to cancel my credit card from my apple ID. how do i do that?
-
When I try to delete a media file it says file system error. Anyone know what this is and how to fix it? Thank you!
-
Why do all of my printers uninstall when I try to print a pdf attachment?
Not every time, but often. What happens is that I try to print a pdf attachment and it says I need to install a printer before I can print. I have 4 network printers, 1 attached, and 3 kinds of pdf creator printers that all disappear from my printe
-
I purchased and downloaded and album of ten songs. most of the songs cut out after several seconds. How can I get them again without having to re-purchase???
-
Help me with a strange problem-itunes wont re-install
Hi there. I recently went to open my iTunes, and instead of opening, the windows installer started. Apparently it thinks iTunes was never on my computer. I try it again, and let it install. I then get an error message that reads, "Error writing to fi