Authorization to RSA1/Metadata repository only

Hello,
We would like to give authorization to end user for transaction RSA1 but only for Metadata Repository.
Does someone can give helps about this ?
Thanks
Marc Fillion

not sure if that is possible (i can't think of an easy, straight-forward way...) but maybe this helps:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3dd83fbd27ea34e10000000a1550b0/frameset.htm
it explains how you can make the metadata repository available throught a web-page (very easy!)

Similar Messages

  • NW730 BW System RSA1 Metadata Repository displays an empty webpage

    Hi All,
    We have installed NW730 BW system in our landscape.
    The Metadata repository is embedded into RSA1 trasaction in NW730.
    We have activated GUI in SICF and published IAC and WEBGUI in SE80.
    Yet when we open the Metadata Repository in RSA1 it displays us an empty webpage instead of the Navigation screen.
    Kindly let us know if there is any solution for the same,
    Thanks,
    Kasi Gupta

    Please check, It's happening in your system only or anyone also face same issue . It's happen due to Internet Explorer version.
    Check metadata repository on other system where Internet Explorer is 6.0 or 7.0. Version. And If he can see the Metadata Repository then uninstall your Integrate Explorer version and Install IE 6.0 or 7.0
    Regards,
    Sushant

  • Metadata Repository to read

    Hi BW Experts!
    My customer would like to allow some users to use Metadata Repository only in BW Workbench.
    So, I gave them the authority for transaction RSORMDR and assigned authority object S_RS_ADMWB - Metadata.
    Now users with this role can not see RSA1, they can use t_code RSORMDR only, what is right.
    BUT unfortunately Transaction connection, Business Content etc (buttons left side on RSORMDR) are still available.
    Is there any chance to  limit Metadata Repository only for users?
    Customer is not using web...
    Thanks a lot!
    Points will be assigned!
    Helena

    Hi Helena,
    Unfortunately the S_RS_ADMWB was not intended to restrict AWB/DWB navigation.
    However, you could run the metadata repository in a separate browser, then no navigation to other parts of the administrator workbench would be possible.
    Here is the documentation on how to do it;
    http://help.sap.com/saphelp_nw04s/helpdata/en/a2/3dd83fbd27ea34e10000000a1550b0/frameset.htm
    Best Regards,
    Vincent

  • Metadata repository - how find ?

    Sorry for my broken english :)
    I must describe metadata OWB Repository.
    But the problem is that i cant find any boks about that.
    I run Enterprise Manager Console, i See many tables, but don;t know
    which are for metadata repository use. Maybe someone can gaive some help ?
    Maybe it is possible to extract metadata repository only ?
    Thanks.
    Message was edited by:
    user625870

    OWB repository tables is not documented publicly by Oracle.
    The only method for extraction information about OWB projects structure and execution results is selecting data from OWB public views.
    OWB repository public views are located under OWB repository database schema (DB user). For OWB11g this user is OWBSYS, for earlier OWB releases this DB user specified during creation of OWB repository.
    If you use OWB11g please read this thread:
    Re: How mapping metadata from the OWB repository?
    Oleg

  • Red error of a web template in Metadata Repository in TEST system

    This red error only occurs on our test system (maybe related to transport).  RSA1->Goto Metadata Repository page->Double Local objects under Activated objects in the middle frame -> Double click Web Template Name in the right frame, then can see two same lines of red errors (see below in between two dashed lines):
    Object 'our_web_template_name' (our_web_template_name) of type 'Web Template Name' is not available in version 'A'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name 'our_web_template_name' (in transport request our_web_template_name) of type 'Web Template Name' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System response
    The object was not taken into account in the next stage of processing.
    What could cause the above red error in Metadata Repository how to correct it?
    Thanks

    For these requests can you check if they contained objects like:
    BW: LOIO Class Web Templates
    BW: PHIO Class Web Templates
    See, even if the transport for a web template does not contain these, it is imported fine, but the web template will not function in the target system. This happens quite often and you need to make sure that the above objects are also included in the request.
    Hope this helps...

  • MetaData Repository in SAP BW

    Hi,
    I am from SAP BW. Actually, we used to create transformation and docement it. But documenting with lot of flows is tough so we used meta data repository.
    But meta data reporsitory only shows mapping between two objects like datasource to isnforsource, i am looking for datasource to infosource to dso to infocube means covering whole flow.
    This is presently not available.
    So, can any1 tell me which ABAP code is running at backend???

    Hello,
    As of 7.30 the BW Metadata Repository has been designed as a WebDynpro Application. It can also run as an imbedded process in the Analytic Workbench (RSA1). Due to the nature of this technology
    a separate login to the WebAS is needed to establish a Web-Session on the local WebAS. However if Single Sign On for the target system is activated the WebAS may be customized to use it as well. In this case you would see no login screen when calling the BW Metadata Repository. Please also note that also all relevant ICF-Services for BW must be active (i.e. all Web Document services) to be able to use the repository normally. Please find here some useful links to relevant ICF and ICM
    documentation which might help you to properly set up your system:
    http://help.sap.com/saphelp_nw73/helpdata/en/48/7f28a10fa44cdbe10000000a42189d/frameset.htm
    http://help.sap.com/saphelp_nw73/helpdata/en/48/3ae05299c172d0e10000000a42189c/frameset.htm
    Regards,
    Michael

  • Grapbical Display of Metadata repository in SAP BW 7.31

    Hi,
    I am working on SAP BW 7.31 and couldnt find Graphical display of BI Content in Meta data repsository,
    We have updraded to the Support pack level 04  and now I could see object details tab but when I click on it its shows
    Service cannot be reached
    What has happened?
    URL call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system with error code 403 and for the reason Forbidden.
    What can I do?Please select a valid URL. 
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team
    In general, object details shows network display of data flows? or is there anything I am missing apart from ICF.
    Please let me know how this can be resloved...
    Thanks in advance

    Hello,
    As of 7.30 the BW Metadata Repository has been designed as a WebDynpro Application. It can also run as an imbedded process in the Analytic Workbench (RSA1). Due to the nature of this technology
    a separate login to the WebAS is needed to establish a Web-Session on the local WebAS. However if Single Sign On for the target system is activated the WebAS may be customized to use it as well. In this case you would see no login screen when calling the BW Metadata Repository. Please also note that also all relevant ICF-Services for BW must be active (i.e. all Web Document services) to be able to use the repository normally. Please find here some useful links to relevant ICF and ICM
    documentation which might help you to properly set up your system:
    http://help.sap.com/saphelp_nw73/helpdata/en/48/7f28a10fa44cdbe10000000a42189d/frameset.htm
    http://help.sap.com/saphelp_nw73/helpdata/en/48/3ae05299c172d0e10000000a42189c/frameset.htm
    Regards,
    Michael

  • 9.0.4.1 Metadata Repository in 9.2.0.6

    I just upgraded my 9iAS infrastructure and mid tier with BI and Forms from 9.0.2.3 to 9.0.4.2. We had all the components on one server except we had a separate 9.2 db for our portal repository.
    I want to know how to migrate my metadata repository to a different server and use database version 9.2.0.6. Are there any documents or specofic sections of documents which could guide me in this migration?

    I am not familiar with the document you refer to, but suspect you should apply the 9.0.4.2 patch if you want to integreate OCS with a 10g portal.
    I have successfully integrated a 9iAS portal with R2 OCS (9.0.4.1), and the following details may be worth a closer look:
    1. To my knowledge, the passwords for your portal user and SSO user (orasso) are encrypted and stored in OID based on the hostname and IP address of your SSO server. Thus, the password for orasso and portal will differ between your portal Infra and your OCS infra, resulting in that only one of the two will work properly with your common OID. run the attached script on both your SSO servers and compare the result:
    #!/bin/ksh
    OIDHOST=antares1.i2sp.no
    OIDPORT=4032
    echo "Enter the desired Oracle schema name (default orasso): \c"
    READ DBUSERNAME
    if [[ -z $DBUSERNAME ]]; then
    echo "No schema value entered, using default:orasso"
    DBUSERNAME=orasso
    fi8
    echo "Enter the password of the cn=orcladmin user (usually the ias installation password): \c"
    stty -echo
    read OIDPW
    ty echo
    echo "Looking up schema password from $OIDHOST:$OIDPORT"
    $ORACLE_HOME/bin/ldapsearch -h $OIDHOST -p $OIDPORT -D "cn=orcladmin" -w "$OIDPW" -b "cn=IAS Infrastructure Databases,cn=IAS,cn=Products,cn=OracleContext" -s sub "orclResourceName=$DBUSERNAME" orclpasswordattribute
    Setting the password for orasso and portal to the same encrypted string is a good start. If they differ, change to the same encrypted string using "alter user orasso identified by xxxxxx" in sqlplus.
    Hope this will help you on the way :-)

  • Applying 10.1.2.3 Metadata Repository update in 10.1.4.3 distributed IDM

    Hi there, I seem to have a unique issue.
    I have the following config of 10.1.4.3 IDM :
    SSO in a separate Oracle home
    OID in a separate Oracle home
    DB (10.2.0.50) in a separte OH and metadata repository installed in this DB
    and this is set up in ASR replication mode with other similer setup.
    Task : Apply 10.1.2.3 OracleAS patchset.
    The story:
    To be fully compliant according to Orcale we ned to apply 10.1.2.3 patch. This patch has two components - a software update and a Metadata Repository (MR) update.
    I have applied software update to all the Oracle homes above (with the exception of DB ofcourse).
    But to apply MR update I have to do it from a mid-tier OH that also has MR installed, I have none.
    I tried installing MR update from SSO and OID oracle home but it would not allow me , I got this message :
    The Metadata Repository Update cannot be run from the selected ORACLE_HOME.
    The Update must be run from either an Identity Management with Metadata
    Repository installation ...
    But we have no middle-tier using this MR, and from this metalik note, it seems applying MR update is not mandatory, only a desirable housekeeping execrcise . :
    Understanding How AS 10g Patch Sets Update the AS Metadata Repository [ID 795143.1]
    Exract from that note :
    a. apply the binary update to each AS Oracle Home in the AS Farm.
    b. finally, if possible apply the MR update exactly once from any home that allows it to be run.
    also from the same note :
    Scenario 6: Applying the 10.1.2.3 AS patch set to a 10.1.4.3 Identity Management home.
    The 10.1.2.3 AS patch set is a required patch set, as documented in :
    Note: 465847.1 Oracle Identity Management 10g (10.1.4.0.1) Release Notes Addendum.
    In this case, the MR Product schemas will not be directly accessed. It is however good practice/ housekeeping to apply the MR update in order to keep the MR in line with the binary patch sets.
    My question :
    I am correct in my understanding that apply 10.1.2.3 software update only is neccessary, applying the MR update is only desirable house keeping and not mandatory ?
    Would you say this is the correct assessment. if not how would you go about applying the MR update ?
    Thanks in advance for your answers.
    Narsimha

    TooManyOracleToysToLearn wrote:
    Upgraded OPatch to 1.0.0.0.64
    Attempted to apply 10.1.2.3 patchset 5983622
    Encountered 2 issues, 1 has prevented us from continuing
    Issue 1: Received following on stdout ...
    failed to get the ias-instance ...
    Error: no ias instance to append to
    Val: 3Did you source the correct env file before applying the patch? --> $INST_TOP/ora/10.1.3/<CONTEXT_NAME>.env
    Issue 2: When running the Configuration Assistants, it fails right away on step "Run One-Off Patches".
    It's looking for the ocm.rsp. Received the following:
    Oracle Configuration Manager (OCM) is included with this release of OPatch.
    This is a OCM patch.
    EBS environment: no OCM installation and configuration.
    To run in silent mode, OPatch requires a response file for Oracle Configuration Manager (OCM).
    Run /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp to generate an OCM response file. The generated response file can be reused on different platforms and
    in multiple OPatch silent installs.
    To regenerate an OCM response file, rerun /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp.
    ERROR: OPatch failed because of cmd. args. problem.Error Applying Patch Using OPatch "This version of OPatch is obsolete", "OPatch failed because of cmd. args. problem" [ID 762403.1]
    10.1.4.3 Patch Set Pre Installation Step: dcmctl updateconfig FAILS: Fatal Relocation Error [ID 849474.1]
    Getting Error 'OPatch requires a response file for Oracle Configuration Manager (OCM)' while Running OPatch [ID 727991.1]
    Thanks,
    Hussein

  • Is 10.1.4.3 Metadata Repository Certified With 10.1.4.1 IM installation?

    We have IM 10.1.4.3 and OracleAS 10g R2 10.1.2.3 on RedHat 4.6 with non-colocated metadata repository.
    Plan is to upgrade RedHat to newest version 5.5. RedHat does not support upgrade with major version and Oracle said that OS vendor is responsible for package compatibility and there is no need for relink Oracle software.
    So, only solution is to do fresh install OS, IM and OracleAS.
    My question: is it possible to install IM 10.1.4.1 against higher version of metadata repository? Is there any workaround?
    tnx in advance
    Matej

    "# Error: Already exists" suggests that schema at AD side is already extended. You mentioned that automatic schema upload process stopped abruptly. There is likely chance that AD schema might be extended partially or fully.
    2nd thing is you can apply BP05 patch once you have identity server running. BP05 does not need to be applied before.
    Also there is option to manually extend schema directly in AD. There is one folder in installation directory which has .ldif files with schema objectclasses.
    At the start of identity server , it is not able to find the configuration DN & seach base to read configuration data , therefore it is failing.
    You have two options here: 1. Reinstall 2. Manually extend schema and then install identity server.
    You can refer to Atul's blog : &amp;raquo; OAM 10.1.4.3 Installation Part II &amp;#8211; Indentity Server Installation Online Apps DBA: One Stop Shop…
    Hope this helps.
    Regards
    Aakash

  • Can't see bex queries in metadata repository

    Hi Pros,
             I have created a lot of bex query and saved in my favorite, but I can't see them in metadata repository. why.

    Hi
    metadata repository we can see both reports custom and standard reports.
    Ex- 0PUR_C01 - if you go this cube query technical names you all get the all reports custom and standard reports.
    select RSA1-> go to the metadata repository -> select query -> select the CNTR+F after give the query technical name.
    please find the below screen shot.
    Thanks,
    Phani.

  • Metadata Repository + IE 7.0 problem

    Hi Gurus,
    I have a problem trying to access the metadata repository in BW since I have upgraded my Internet Explorer version to 7.0 (IE 7.0).  The screen just comes up blank!  The web browser did not only impact my metadata reporsitory, I also have a problem viewing any help docs through hitting F1!  Again the screen is always blank.  Has anyone else had this problem and how did you resolve it.  I just need more info so I can direct basis in the right way.
    Many Thanks
    DV

    Hi DV,
    From my personal experience IE7 does not yet fully support the EP functionalities and screen. One of my colleague wroking on IE7 had to uninstall it and started using IE6 again.
    Bye
    Dinesh

  • BW Metadata repository asks for login

    Hi all,
    We just completed our BW technical upgrade to BW7.3 SP03.
    After the upgrade while accessing the Metadata repository via RSA1. It is asking me to re-enter the log in credentials of the BW system. This was not the case earlier. Can you please help me in resolving this issue.
    Thanks,
    Regards,
    Vasavi

    Hello Vasavi
    Please check the followings..
    From T-Code RSTPRFC  -
    > Select your BW Client
    Check what is the background user name .... Like ALEREMOTE.
    Then check what is the type of this User id  ( Like Dialog /System/Communication/Service).
    If it is not System ( type B) then ask your Security/Basis team to change it to System or Service ( Type S) and then try to browse to MetaData Repositiry.
    Please share the test result
    Regards
    Anindya

  • Metadata Repository missing the list

    Hi Experts,
    When I goto RSA1 and clicl Metadata repository, none of the objects shows up. Not even i get the option to selecr teh object category...
    Can anypne please help me with teh fix. Is it somethiong to do with my Autho or some port settings???
    DV

    1. Check whether the SAP GUI is installed properly
    2. Check the version of your IE
    3. Check with BASIS team for the settings made for Metadata repository. check the below link for more details: http://help.sap.com/saphelp_nw04s/helpdata/en/85/905640a2f78437e10000000a155106/frameset.htm
    Hope this helps..
    Regards,
    Prema

  • How to login to Metadata Repository

    Hi All,
    I run the select statement (app_registry table) to find my database server has Metadata Repository in it.
    Select * from app_registry where comp_id = 'MRC'
    Database Server - Oracle 10g hosted on Unix Server.
    How do I login to my Metadata Repository and what are all the important parameters like memory values and where are they located?
    Regards,
    Balaji A

    You can login to metadata repository, this is only a gropu of Schemas (or users) that have some items or objects that make some tasks, and finally all the info generated is stored in this database.
    You may have the structure of the repository, but if you dont have a user such as oc4jadmin, sysadmin, orcladmin, orabpel, or so on, that creates all the objects using a MRCA or IRCA you wont have a fully workin repository .
    Regards.

Maybe you are looking for