Authorization to the Item Mater File

I have the need to allow certain users to have change access to specific tabs in the item master.
Is there a way to allow change access to certain tabs in the Item Master file and display only access to others?
I have been told, but have not confirmed, that it is only access to the etire item master file or nothing.

Hi Nick,
You can easily provide the display authorization to all the users.
But you can also provide the change authroization of specific views to specific users.
This can be done by creating screen varients (SHd0).
u can create a screen varient of T-code MM02 for a specific material master view, assign the screen varient t-code, activate it and provide the authorization of this new t-code to a specific user id.
You can also restrict the authorization of T-code MM02 for a particular material master view like
MM02 authroization only for P (P= forcasting view)
For this pl. take help of Basis person.
Hope this will help you
REgards,
Amol

Similar Messages

Video does not play: "Either windows doesn't support the item's file format......"

Error message
"Either windows doesn't support the item's file format or the content doesn't match the extension"
I have both a Yoga and a Thinkpad 2. The Yoga is running Win 8 and the Thinkpad 2 has 8.1 Preview.
I have copied multiple video files which are in either .avi or .mp4 containers.
Some will play and some will not. I have installed all sorts of codec packages and players and the problem is the same. I though it might be a container problem so I tried to convert the file and the converter I used did not work.
Searched the Internet and nothing really useful was found.
Then I discovered a common thread. In the files that played, the codec information displayed when checking in properties and the ones that did not play, did not have the information.
I have a video file on a USB flash drive and checked the properties and the information was there and I could play it from the flash drive. I copied it to my desktop and the file would not play. In checking, the codec information was not present.
There seems to be an error in copying files where the requisite codec information is not being transferred.
I have tried this multiple times and multiple permutations of transferring. Sometimes it will play from the desktop and will not play after transfer to the microSD card.
Each time when it plays, the information is there and each time it does not play, the information is not there.
Sal

The problem is the period at the end. This system assumes it
to be part of the url. I should have put a space and the end of the
url before using a period to close the sentence. try this one:
http://www.aaew.org/intro.swf
http://www.scofieldministries.org/webtest/mv1.swf
http://www.scofieldministries.org/webtest
Please note that just the home page and supporting files have
been loaded to the test server.
Thanks,

Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

Maybe some help here:
http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

Cannot delete file: The operation can't be completed because the item "DataReferences" is in use.

I have a My Book TB Drive where all of my Time Machine backups go to. I decided to delete some older version of backups. They ended up in my trash can. When I deleted the items in my trash can, all of them erased with the exception of one file. This file refuses to go! I have tried "Empty Trash", "Secure Empty Trash" and holding the Option Key + "Secure Empty Trash". Each time the I get the following error: The operation can’t be completed because the item “DataReferences” is in use.
If I unplug the My Book TB Drvie, the file dissapears from the trash can. If I plug it back in, it reappears.
I am not sure what to do anymore. Any suggestions?
Thanks!
MacMini
Mountain Lion (Error originated in OS X)
My Book TB (External Hard Drive)

I found an article on how to allow third party apps. Posted it below just in case if anyone is interested.
http://www.computeraudiophile.com/f11-software/your-security-preferences-allow-i nstallation-only-apps-mac-app-store-and-identified-developers-12789/
Anyhow, I was able to do the double click on the trash it.I tried the "fast" version and the "really stuck" version and unfortunately, none of the options worked.
Any other suggestions?

Iomega UltraMax 4Q PLUS the following message appears: The operation can not be completed because the item "FILE NAME" is in use. "

Help, I need to solve. No speculation please bomas or attempts to restart, confirm that the HD is formatted for MAC and etc. .....
Whenever I try to copy my files from my HDD Western Digital 2T for my new Iomega UltraMax 4Q PLUS the following message appears: The operation can not be completed because the item "FILE NAME" is in use. "
I can not stand it anymore ...
I need to work and not temnho more space on my machine.
Scenario - iMac11, 10.6.8 + WD + 2 + 2T 4T Iomega UltraMax Plus, formatted for both Mac and connected via Firewire 800
Trying to copy the message aborts the copy - "The operation can not be completed because the item" FILE NAME "is in use."

Hello,
As I said earlier, properly formatted for Mac.
Mac OS Extended (Journaled)
This HD is formatted for MAC factory, but I even did a few times in my attempts I can say that this is entirely correct formattingwith it - Mac OS Extended (Journaled)

Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?

Can't move any files... "The operation can't be completed because you don't have permission to access some of the items."

This is a strange one... I just recently did a complete format/reinstall of Lion because of very poor performance after upgrading.
So I'm on a totally fresh system, no TimeMachine restore or anything. I've installed all my apps from scratch - no prefrence file backups or anything. Everything is fresh.
Yesterday I tried to copy a file from one folder to another and I got the error "The operation can’t be completed because you don’t have permission to access some of the items". Checked file permissions... repaired disk permissions... made sure I was logged in as admin (I only have one account)... everything looks good.
This is now happening when trying to copy any files anywhere on my machine... Very frustrating.
There's a couple strange side-effects I've noticed:
- I can move & copy files just fine in terminal... without sudo...
- The little lock icon in the bottom right of the Get Info window doesn't do anything - I can't unlock it. I can still edit the permissions for the file/folder but I can't select the "apply to enclosed items..." option.
Does anybody know what the heck is going on?

jsd2 wrote:
Try creating a new admin user account, logging into it, and then creating some new items on the Desktop and elsewhere. Does the same thing happen there?
Ok the strangeness continues!
I created a new "TestAdmin" account, but it doesn't show up in the Users & Groups prefrences sidebar... The /Users/testadmin folder was created, but the account doesn't show up in the prefrences or login window...
I tried a reboot to see if the account would show up and it still doesnt.... However after the reboot I am now able to copy files again!
I'm paranoid that the problem will show up again since I have no idea what fixed it. I tried rebooting previously after repairing permissions which didn't solve the issue so it's not like I haven't rebooted since it started.
And now I have the issue of not being able to create user accounts.
A little dissapointed with Lion to be honest... the new features are cool but there are so many little bugs it really feels half-baked.

Problems copying iTunes folder to an external hard drive - "The operation can't be completed because the item FILE NAME is in use"

Hi,
I have been trying to back up my iTunes folder from my MacBook hard drive over to a new LaCie external hard drive. However, whenever I try to do it at some point during the copying I keep getting the warning "The operation can’t be completed because the item FILE NAME is in use". Each time I have tried it, it is always a different file name that comes up and at different points of the copying. Following the warning, the copying stops and cannot be restarted.
I tried copying the iTunes folder to another Lacie external hard drive that I have, and it worked fine so I am guessing that it maybe something wrong with the hard drive.
I've been trying various approaches all day and can't seem to get anywhere with it - all very frustrating, so any help would be much appreciated!
Thanks.

If you don't have other backup data on it, reformatting external drive could solve the problem.

The operation can't be completed because some items had to be skipped. For each item, choose File Get Info, make sure "Locked" is deselected, and then check t

The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Can't move files - The operation can't be completed because the item is in use.

Hi everyone,
I'm trying to move some files off an external hard drive to my macbook pro. These are mostly video files.
However, there's a handful of files which are causing the following error:
"The operation can’t be completed because the item “XXX” is in use."
I've no idea what's wrong but would appriaicte some help. All the previous threads I can find with the same error are related to moving items to the trash and I actually followed some of the advice (shutting down etc) but it still didn't help.
Thanks anyone and everyone for the assistance.
James

I was investigating this same problem on our iMac running OS 10.10. When I checked Activity Monitor for the DiskUnmountWatcher process, I noticed that with two users logged in simultaneously, there were two instances of most of the system processes, including that one. If I logged out of the other user account, and consequently only had one instance of the DiskUnmountWatcher process running, I was able to copy multiple files onto the network drive with no problem.
If I were to speculate, I'd probably guess that DiskUnmountWatcher is adding some metadata to new files when it detects them being added to a mounted drive. If there are two instances of the process running, they both try to modify the file's metadata simultaneously and generate errors.
TL;DR: If you encounter this problem, try logging out all users other than the one trying to move files.

I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."

I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info." I have never had this happen before? Thanks!

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions.
OT

I would like to know how i can save an byte array to a mat file format (matlab file format '*.mat') within to use the matlab API

So, I search the binary matlab file format('*.mat').

Title:
Moving Data Between MATLAB® and LabVIEW
Problem:
How can I share data between LabVIEW and the MATLAB environment?
Solution:
MATLAB users can move data between the
MATLAB environment and LabVIEW, you have several options. Prior to
LabVIEW 5.1, the only way to transfer data between these two
environments was to use the Save and Load functions. Those are discussed herein.
Beginning
in LabVIEW 8.0, MathScipt was introduced. MathScript is an integrated
part of LabVIEW that you can use to combine intuitive graphical
dataflow programming with math-oriented textual programming. See the
attached links below for more information on MathScript.
Beginning
in LabVIEW 5.1, the MATLAB script node was introduced into the LabVIEW
programming environment. The MATLAB script node makes ActiveX calls to
the MATLAB software from within LabVIEW. This requires that both MATLAB
be installed on the same machine and that a valid license is obtained.
More information on the MATLAB script node can be found in the attached
KB's.
For all versions of LabVIEW, this data transfer can be
performed by saving the data in a file using the MATLAB software and
reading it directly from LabVIEW, or vice versa. In the MATLAB
environment, the command "save" allows you to save the data in
binary format (*.mat) or ASCII format. You also have an option of
saving it in ASCII format using a tab delimiter between data points and
the command "load" allows you to read in the data.
ASCII Format
Complete the following steps to import or export data between LabVIEW and the MATLAB environment using an ASCII file format.
From the MATLAB environment to LabVIEW
To save a vector or a matrix X in tab-delimited ASCII format, enter the following in the command window or m-script file in the MATLAB environment:
>>SAVE filename X -ascii -double -tabs
This creates a file named filename containing data X in tab-delimited ASCII format.
Import the file into LabVIEW using the Read From Spreadsheet File VI located on the Functions»File I/O palette.
From LabVIEW to the MATLAB environment
To export a matrix X from LabVIEW to the MATLAB environment, first save the data in ASCII format in LabVIEW using the Write To Spreadsheet File VI on the Functions » File I/O palette.
Enter the following in the command window of the MATLAB environment, or in the m-script file:
>> LOAD filename
This reads the data into the MATLAB environment.
Binary Format
Complete the following steps to import or export data between LabVIEW and the MATLAB environment.
From the MATLAB environment to LabVIEW
As mentioned above, LabVIEW does not save multiple variables to one
data with extra manipulation, and will not be discussed here.
Therefore, the only way of sending the data from the MATLAB environment
to LabVIEW without tampering with the MAT binary file structure is
using the ASCII format. Also, please bear in mind that you need to have
one file for one variable.
From LabVIEW to the MATLAB environment
Because
the MATLAB software saves data in its own binary format, the "MAT"
file, binary LabVIEW data must be converted to this format prior to
transferring the data. The attached examples can be used to save
LabVIEW data in the MATLAB software format. The convenience of the .MAT
file format is that more than one variable can be saved in the same
file. The example shows saving seven variables to .MAT format; the
example can be modified for any number of variables.
Once this data is saved from LabVIEW, it can be read into the MATLAB environment, using the following command:
>>LOAD filename
The Who
command can then be used to display all the seven variable names, and
you can display the content of them by entering the variable names at
the command prompt as usual.
MATLAB® is a
registered trademark of The MathWorks, Inc. Other product and company
names listed are trademarks and trade names of their respective
companies.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

The filtering process could not be initialized when trying to process this item. Verify that the file extension is a known type and the item is not corrupt

I am getting below error message while search crawl in sharepoint foundation 2010 search for only .VSD files and not for any other docs type.
The filtering process could not be initialized when trying to process this item. Verify that the file extension is a known type and the item is not corrupt.
I have installed the Microsoft Filter Pack 2.0 in search server but still i am getting the same error.
<//span>
Any one's help will be appreciated.
Regards,
Rashmi
Rashmi Singhal

Hi Rashmi,
1. Checked the file extension is added or not to the search file types.
2. Checked file name has any invalid characters.
3. Resetting the crawl index and run a full crawl .
Best Regards.
Kelly Chen
TechNet Community Support

How do I redownload previous purchases? Itunes says that the items are downloaded, but when I select them in my library it says that the original file can not be located.

I've gotten a new computer, the hard drive of my original one had issues and I wasn't able to move all of my iTunes over to my nec pc. I went to the purchased area on my iTunes to redownload the missing stuff (music and tv shows), but it says that they all are already downloaded onto my pc. I do find the items in my library but they won't play, I get the option to "locate" the missing original files or "cancel". I've even tried simply repurchasing the tv series, but I get a message to go to my purchases to redownload. Any suggestions on what to do?

If you plug in your iphone, click on it in iTunes, and go to the apps section, it should be checked to sync apps if you want them to show up in iTunes as well as your iPhone. Once synced they will show on both.
Then if you click Apps under the Library header in the left panel of iTunes, you'll be able to permanently delete apps, removing them entirely from iTunes. Highlight an app's icon or a group of icons by holding down Shift and hit the delete key (or select Edit > Delete from the top menu or right-click on an icon and selecting delete).

File Share.Could not find the item, this item is no longer here, check the location and try again

Hi all, I have a failover cluster Wiindows 2012 R2 server with file server.
A few days ago, when users try to rename folders and the following error can not be appearing:
"Could not find the item, this item is no longer here, check the location and try again"
When I enter as a domain administrator, I can rename the directory.
Do you know that you can be?
regards
Microsoft Certified IT Professional Server Administrator

Good afternoon,
and this solved it was a problem with
Windows 7 and Windows Vista
computers, a registry key that affects the
Explorer process is corrupted.
This registry key is ejcuta and
solves:
FolderDescriptions x86.reg
greetings To Your
Microsoft Certified IT Professional Server Administrator

Authorization to the Item Mater File

Similar Messages

Maybe you are looking for