Authorizations for total visualization of the configuration from the SPRO

Receive a warm greeting.
We needed to give authorizations ours you lead functional so that they enter the SPRO_ADMIN and they see all the parametrización, but without they have access to transactions SM30 and SE16, is possible?.
This because when they enter the different options they request to them authorizations to these transactions, and these is restricted by our controls SOX
I wait commentaries

I have checked the computers (both wireless and LAN) firewalls are disabled and the firewall option is disabled in the wrt54gx. Also, the LAN has no other switches or routers connected to it. The only setup that the wrt54gx has is that it is setup for dhcp for the wireless computers.

Similar Messages

Authorization for User to Jump the Query

Hi,
The user1 (log is not generating for this user in RSSM) cannot use the jump target in the reports which have been placed under a role, whereas the other user2 (log is able to generate for this user in RSSM) is able to jump target in the reports in SAP BI.
I need to give the proper authorization to user1 same like user2.
How can I solve this issue.
Thanks in advance.
Regards,
Ravi Sankar

I dont understand what you mean with "(log is able to generate for this user in RSSM)"
In RSSM you can create authorization objects....
If you want to give some authorizations for a specific query you must check the SU53 in order to see the objects that you need to add to the users profile.....
The procedure is.......give th user the Query link in order to open the query....and obviously that action gives you an authorization error.....then enter to the SU53 and this transaction shows you the authorization object you need to add to the profile.....
I hope this helps
Regards

Adobe just billed my credit card without authorization for Adobe Cloud using the information they had from my photoshop order.

Very scummy billing practices. I never authorized Adobe cloud to be billed to my credit card. They simply used my credit card information obtained from my Photoshop order. I want a full and immediate return of all funds. At this point I will also cancel my Adobe Photoshop order.I will certainly spread this on the web as well

Hi there
I could only find an order for a Creative Cloud Photography plan under your account. This was started on November 7th and is billed $9.99 each month.
Did you sign up for this? What is your Photoshop order number?
Kind regards
Bev

Defining Authorizations for User to restrict the data in report.

Hi Gurus,
I have no idea on authorization concept in BI. Please give me anyone steps to creating authorization objects, roles and profiles to restrict the data for users.
Ex.
i have functinal location info object checked as authorization relavent with below data.
FL001
FL002
FL003
FL004
FL005
FL006
FL007
FL008
FL009
We have users like below.
User1
User2
User3
Now, if User1 is analysing a report he can see only FL001, FL005, FL009 only, remaining have to be omited.
If User2 is analysing that report he can see only FL002, FL003, FL009. And like wise.
So, Please help me providing the completed steps. I have done somting but failed.
Thanks in advance
Peter.

Hello Peter,
Please go through the following links
Authorization :
http://help.sap.com/saphelp_nw70/helpdata/en/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
SAP Authorization Concept :
http://help.sap.com/saphelp_nw70/helpdata/en/52/671285439b11d1896f0000e8322d00/frameset.htm
Thanks.
With regrads,
Anand Kumar

Query for total size of the spatial data

Hi,
I found some posts to determine the size of the spatial table but is there a query I can use to determine the exact size of my spatial column. I have about 2 mil. geometry points and I would like to know exactly how many bytes it is.
Thanks in advance.
Aarthi

Hi,
I have an old analysis I did several years ago. I couldn't get size for the SDO_GEOMETRY column per se, but I could calculate the approximate size required (not including extra space required for block boundaries, etc.). Note this info is quite old, so your milage may vary...
This is the summary:
SDO_GTYPE 3 bytes plus 1 byte for every two numeric places (four digit gtype=5 bytes)
SDO_SRID 1 byte if NULL; or 3 bytes plus 1 byte for every two numeric places
SDO_POINT 1 byte if NULL; or for each of the three numeric values, 1 byte if
             NULL, or 3 bytes plus 1 byte for every two numeric places
SDO_ELEM_INFO 1 byte if NULL; or for each numeric value, 3 bytes plus
             1 byte for every two numeric places, plus 40 bytes overhead for the VARRAY.
SDO_ORDINATES 1 byte if NULL; or for each numeric value, 3 bytes plus
             1 byte for every two numeric places, plus 40 bytes overhead for the VARRAY.

Transport-Cockpit: No authorization for using the vehicle-resource

Hi everyone
In my planning profile I determined a sprinter as vehicle resource. As soon as I start the Transport Cockpit the freight orders appear, indeed, but TM claims that there's no authorization for my sprinter. The sprinter does not appear in the frame "resource". Selecting this vehicle manually TM post the message: vehicle not found. As far as I can estimate my master data are correct assigned.
Does anyone of you has been confronted with this problem?
Thank's for your help.
Michael

Hello Mike
I created the vehicle under Master Data / Resources / Define Resource.
Resource Category: T
Time Zone: CET
Means of Transport: 4 (the same number as I choosed in the freight order)
Planning Parameters: Finite Scheduling
Owner: the carrier of my freight order
Auth. Resource: the same carrier above mentioned
Template: Resource Template, Means of Transport: 4
Resource Validity: 1.1.1970 to 31.12.9999
Physical Properties: Mass = 1.000 kg, Volume = 4,5 m3
Time-cont. Capacity = 3 Pal (it does not make sense but I have not opportunity to change this value)
The other fields don't have any values.
In the forwarding order or rather freight order I determined the vehicle which is suitable to the selected carrier. I assume that there is a connection between the error message and the planning profile. I define in my planning profile the sprinter as vehicle:
Planning Profile / Capacity
VEHICLERES_ID inclusive = [and my vehicle]
I tried, too:
OWNER inclusive = [and my carrier]
What Transportation Cockpit is doing now, is EXCLUDING exact that vehicle (or rather carrier) I want to dispatch. It seems to work vice versa.
A sprinter is just another name for a small bus. I linked you to a photo of mercedes. Sprinter or long truck - regardless of which of them I use: the error remains.
Regards,
Michael

Authorization for MM

Our business scenario demands that a particular user should be able to access the T.code"Me23n(Display P.O)" but shouldn't be able to view condition tab in the "item detail",how to set up the authorization for this, please mention the detailed steps.

Hi Shashi,
I would recommend you to look under M_BEST_BSA authorization object in the role.If you are not able to restrict the user from viewing the Conditions tab with this approach then it is something to do with MM Configuration.
Hope this helps.
Regards,
Kiran.

EDMS: 'Missing authorization for this functionality' when searching user

Hi,
I've activated ALC authorization for DMS. In EDMS, when trying to add an user to a DIR with search function an error occurres as below.
'Missing authorization for this functionality'
BTW, the user has contains SAP_ALL profile. It can't be any authorization reasons.
Regards,
Yemi

Hi,
authorization checks will not happen if the search help from sap-gui.I
think the problem is releted to missing implementation of "check
function module" from your side. If the search help is linked to a
"master data table" (type A) a check function must be implemented to
check the permission of the user.
This function module is read from table BAPIF4T. Please
check the following link: http://help.sa
p.com/saphelp_nw04/helpdata/en/a5/3eca044ac011d189
4e0000e829fbbd/content.htm
http://wiki.sdn.sap.com/wiki/display/PLM/Object+Link+search+in+EasyDMS
Regards,
Hari

User Authorization for a Query

Hi,
I have assigned a single role to a user, in which I have authorization for all the Infoproviders, including authorization for reporting. The user is able to access most of the queries, except one query. If there is a problem, he should not have accessed all the queries.
What problem could have prevented the user from accessing on particular query???
Any Ideas will be highly appreciated,
Thanks and Regards,
Ravi Sankar

Some possibilities:
The one query which the user is not able to run , who is the author of this query?
You need to give authirozation for the object S_RS_COMP1.
If the user has authorization for this object, then the next possibility is:
The query may have a filter or a characteristic value for which the value is not set for the user.
Ravi Thothadri

User has no RFC authorization for function group.

Hi expert,
I am calling a new function module from the WebDynpro Java that is causing an issue that User has no RFC authorization for function group. if the user doesnt have proper authorization like SE37 Transactions Code and others.
But there is some more existing function module in the same application that is working fine without having above issues with same access.
I am passing the USERID as input in the function Module and execute simply.
So can you please tell me the Way to handle it?
I will really appreciate your answer.
Thanks
Ali

Hi Rali,
I think,there is problem with ur JCO connection..
Please check the following steps -
1. Go to transaction SM59.
2. Choose Create.
3. Enter the following:
RFC destination: SAPSLDAPI
Connection type: T (Start an external program via TCP/IP).
4. Choose Enter.
5. Choose Technical settings and specify the following data:
a. Select Registered Server Program as the activation type.
b. Enter the program ID of the SAP J2EE Engine that acts as the RFC server. Enter SAPSLD_xyz (xyz is the SID of SAP J2EE Engine Server.)
c. Enter the gateway host and the gateway service of R/3 server
d. If the system is a Unicode system, navigate to Special Options and select the option
Non-Unicode or Unicode in the section Character Width in Target System according to the gateway
server.
6. Save your entries.
Now
1. Go transaction SLDAPICUST.
2. Switch to editing mode and choose Insert Row. Specify the connection parameters of the J2ee server ,
Host name, port Number, user and password - and set this SLD server as Primary.
Only the entry marked as Primary is active.
Please check whether there is entryof r/3 server in the j2ee server /etc/services folder.If no entry is there then add -
R/3server port/TCP
in the service file.
Please check the r/3server service folder and host folder - do they have entry of java server, if no add the entry in the same way as done above for j2ee server.
Also check the Group ,that u have entered for r/3 server in SLD exist in R/3 server or not if not add it....
I hope this will help you ...
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks,
Gunja
Edited by: Armin Reichert on Apr 26, 2008 6:35 PM

Roles & Authorizations for Web Reports...

Hello Experts,
We are newly implementing Web Reports in our organization. I need your great thoughts regarding implementing Authorizations for users to access the reports.
We are using a report menu page that contain links to all the reports. The page opens by clicking on a link on the portal. The individual reports are basically accessed from this page by clicking on the corresponding button (links a URL ).
I wonder if there is any way to look into the menu page (XHTML code of that web page/application) when ever the users click on the reports link and disable those buttons that the users are not allowed to access depending on the roles users are assigned to. Otherwise is there any better way to do it.
And also how to call a function from web applications.
This is a kind of urgent issue any quick ideas would be greatly appreciated.

I apologize for the difficulty in reading this I will repost.
We have had no training or received any documenation on WAD. The below was created from internet research. Hence there may be WAD functionality that would allow easier maintenance, however; this is what we use.
With our dashboard, I have a web template that contains hyperlinks for our reports. I will call this HeaderTemplate1. For each web page I have report templates. These report templates have the HeaderTemplate1 mentioned above as well as the report tables, charts, text elements, tabs, etc.
The JavaScript logic for accessing the urls of the specific report templates is contained within our HeaderTemplate1.
Below is how our setup was tested. Keep in mind, this was only for testing basic functionality. If this is something we use I will most likely create a master data table that houses the user ID and an attribute for the header type. Thus, any report menu changes can be altered quickly without changing the javascript of each report template. Also this will accomodate the few thousand users we have.
To add the functionality of different 'menus', I created another header template with the same hyperlinks of HeadertTemplate1 with the exception of one or two hyperlinks. This, HeaderTemplate2, was added to each report template just below HeaderTemplate1. Note that both HeaderTemplate1 and HeaderTemplate2 were set as visible on each report template.
Also, on each report template I added a text element. The 'List of Text Elements'property was set as such; Element Type = General Text Sympol, Element ID = SYUSER. This Text Element was linked to a query or view from BEx via the dataprovider. On the HTML side, I surrounded this Text Element with
<Font ID="UserID",,,textelement....</Font>
Each Report template has this javascript function, fnRepOnLoad, which is triggered at the OnLoad event.
[<SCRIPT language = "JAVASCRIPT">
function fnRepOnLoad()
    var user_ID=document.getElementById("UserID").innerHTML;
    if (user_ID=='USER123')
      document.all["HEADTMPLT1"].style.visibility = 'hidden';
      document.all["HEADTMPLT1"].style.position = 'absolute';
    else
      document.all["HEADTMPLT2"].style.visibility = 'hidden';
      document.all["HEADTMPLT2"].style.position = 'absolute';
</script>
The function results as this. If the user is USER123, HeaderTemplate1 is hidden, leaving only HeaderTemplate2 visible. Otherwise HeaderTemplate2 is invisible leaving on HeaderTemplate1 visible.
We do not use buttons as our global leaders prefer hyperlinks but buttons can be enabled or disabled similarly.
As mentioned before, if this method is implemented, I will create a reportable master data table. Create a customer exit variable to retrieve the header template required for the user. This header template variable value will then be pulled by a text element on each report template. The script function will act as follows. If many report headers are necessary I may use a case statement.
Var User_template=document.getElementById("UserTmplt").innerHTML;
If UserTmplt = HeaderTemplate1
--> make all header templates other than HeaderTemplate1 invisible
else
--> make all header templates other than HeaderTemplate2 invisible
etc...
I hope this helps. Please keep me posted with your solution. I am very interested to learn what others are doing.
Best Regards,
Larry

No authorization for maintaining

hi
i am trying to enter the tcode VOFM system shows this massage
Authorization for displaying table TFRM only (authoriz. grp VS)
Message no. VP260
Diagnosis
You do not have the authorization for maintaining object S_TABU_DIS and the authorization group relevant for the table (maintained in table TDDAT).
System Response
No authorization for maintaining
Procedure
Enter the authorization for the object and the group in the user master record, if the user is to be authorized.
help

Hi sdnguna ,
when the message was displaed, use
Menu system->ustilities->Display authorization Check.
Send this screenshot to responsible team.
Regards,
Clemens

Sapftpa - no access authorization for computer

Dear Forum,
When running a function module FTP_CONNECT to do ftp to a server, always gets an error message: "<user> has no access authorization for computer <IP_address>". The ftp is on Win 2003 server Enterprise Edition.
Any helps will really appreciated.
Regards,
Agoes

To check the missing authorization Enter the T-code SU53 it will display the missing objects .then assign these objects to your user role.
Thanks and Regards
Waseem Yousaf

Role authorization for CJ88 T Code

SAP Gurus
can any one tell me control the CJ88 T code, my client is having 4 business areas but, so in one business area employee will not access the other business area WBS element, can any one tell me how can i control
thanks in adv
venkat

You could get with your Basis group to add the authorization object: F_BKPF_GSB - Accounting Document: Authorization for Business Areas to the CJ88 transaction and set it to be checked at execution. Then you could create different roles for each business area and set them to the different values for BA. You can use TCode SU24 to see that there are no authorization objects in CJ88 for checking BA in SAP standard.
Alternately, you could find another role that already has this object and limit it by each area, but this would take multiple, nearly identical roles.
Regards

Authorization for Delimit / Lock button in PA30 screen

Hi All,
I have a requirement that users should not be able to Lock the leave record in IT2001. The user has authorizations for Read / Write and Display.
Also I do have a requirement that the user should not have authorization for delimit button. The user has authorizations for Read / Write and Display.
Do we have any authorization object for delimit / lock ??
Any Input will be highly appreciated.
Shrikant Basarkar

It's a hardware issue. If it's out of warranty, you can get it replaced but there's an out of warranty fee associated.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

Authorizations for total visualization of the configuration from the SPRO

Similar Messages

Maybe you are looking for