Authorizations Required for Accessing WAD and setup an Active RFC

Hi All,
I an having problems for accessing WAD. It says 'You are not authorised to run WAD'. Does any one have idea of what authorizations are required to access WAD. I need to do the set up for information Broadcasting.
Also some help is need for setting up an active RFC server. Can any one specify what attributes are required to setup an active RFC Server.

Hi,
will you be able to provide more specific information.... regarding it........
I need the information as I need to Broadcast a web template...

Similar Messages

  • Authorizations requirements for accessing ODS in Crystal

    Hi,
    is there any documentation on which authorizations are required on the SAP side for using the ODS driver in Crystal Report?
    Regards,
    Stratos

    Hi Ingo,
    BW Query, Infoset and OpenSQL are listed but not the ODS driver.
    Regards,
    Stratos

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • Authorization Required for RFC user  in R/3-APO system.

    Could you please help regarding one authorization issue. I want to know the authorization required for one RFC user. Now this RFC user used for RFC connection of SAP R/3 - SAP APO system. user type is given dialog type and SAP_ALL profile has been given to this user  id. Now I have to remove SAP_ALL from this user id in R/3 and APO system and  provide the required the authorization in R/3 and APO system.
    Regard
    Auroshikha

    The RFC authorisation depends completely on what the user is doing (ALEREMOTE?).  We can't tell you what RFC auths your connection requires. 
    There is a guide to doing this here: https://wiki.sdn.sap.com/wiki/display/Security/BestPractice-HowtoanalyzeandsecureRFC+connections

  • Authorization required for creating new Organizational units

    Hi all,
    How can we give authorization required for creating new Organizational units (IMG – CRM – Master Data – Organizational Management – Organizational Model – Create Organizational Model) to a particular user?
    Thanks and Regards,
    Archana

    the basis guy should be able to help.
    at a higher level: you need to set authorizations to the roles assigned, the transaction code is pfcg.
    you may create a new role with the required authorization and assign to the relevant users.
    hope it helps..
    regards
    RH

  • Authorization required for creating new Organizational units in CRM

    Hi all,
    How can we give authorization required for creating new Organizational units (IMG – CRM – Master Data – Organizational Management – Organizational Model – Create Organizational Model) to a particular user?
    Thanks and Regards,
    Archana

    Hi archana,
    U can Create a role through Transaction PFCG.
    Just create a role and assign the tcode PPOCA_CRM if u want to give the user just only this authorization otherwise u can select the menu list from sap menu and assign this role to that user.
    Another way is if that user already exist in that system then just assign that particular transaction codr with that user.
    Hope it will help u
    Regards
    Subhash

  • (Deployment) Minimum Software required for BUILD server and IIS WebServer

    We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
    The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
    In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
    The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
    So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
    If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
    What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
    Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
    Thanks in advance for the advice.

    Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
    To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install.  Choose a Custom install.  You'll be presented with a drop down list for the Enterprise components.  Deselect everything and then look for the Developer Components option.  You may have to drill down into one of the levels to find it.  Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK.  Select it to install it.
    Jason

  • Disabling authorizations checks for transactions SU53 and/or SU56.

    Greetings.
    I seem to remember reading that there was either a system profile parameter or a table entry that can be used to disable all authorizations checks for transactions SU53 and/or SU56.
    Any truth in this or is my mind playing tricks on me?

    Hi,
    I guess theres is profile param auth/tcodes_not_checked(I guess thats right), this will exclude SU53/SU56 from checks on transaction code.
    This can be done using RZ10 and need to restart the system.
    Rakesh

  • Bandwidth requirement for accessing SAP via SAPGUI

    Hi,
    I have ECC 6.0 system on windows. I need connectivity from remote locations to central office where SAP server resides.
    How to calculate bandwidth requirement for accessing SAP via SAPGUI from Remote locations?
    Regards,
    Nirav.

    Hello,
    please refer to the [Front-end Network Requirements for SAP Solutions|http://service.sap.com/~sapidb/011000358700003943521999E] document.
    (The navigation path on Service MarketPlace would be http://service.sap.com/sizing > Sizing Guidelines > Solutions & Platforms, then search for the title above).
    Best regards
    Rolf-Martin

  • Bandwidth Requirement for accessing SAP

    Hi,
    I have ECC 6.0 system on windows. I need connectivity from remote locations to central office where SAP server resides.
    How to caculate bandwidth requirement for accessing SAP via SAPGUI from Remote locations?
    Regards,
    Nirav.

    Hi,
    Please check the link below
    https://fortress.wa.gov/dop/hrms/techinfo/NetworkReq.htm
    Hope it helps you.
    Rgds,
    Suman

  • Scenario required for sd route and mm route

    Dear Guru
    There is two process for stock transfer order one is SD route and 2nd one is mm route
    can you please explain the differnce between these rout
    and what is the scenario required for sd route and mm route
    it means in which scenario we use sd route for stock transfer and in which scenario we use mm route for stock transfer
    Thanks in advance
    Kashyap

    Kashyup,
    I am not aware of 'SD Route vs MM Route'.  They are the same Route.
    STO is basically a special kind of Purchase order.  Purchase orders are part of the MM module. In order to permit shipping goods from one plant to another, SAP has 'borrowed' some of the functionality from the SD module.
    During Configuration of Stock Transport orders, you assign a Customer (Shipto), Sales org, and Distribution channel to the receiving plant.  When creating a STO, the system uses these data to determine the Route.
    Route contains info that the system uses to plan movement of goods from one location to another location in the SD module.  The route contains duration information (how long does it take to move goods from warehouse to customer location), factory calendar, and perhaps some other data.  In the case of an SD order, the system will find the customer for the Sales doc, the default shipping conditions for the customer, and using this information together with the region of the shipping point, will determine a route.
    This same determination procedure is also used during creation of a STO.  The system will take the STO customer from STO configuration, and the default shipping conditions for that customer, and using this information together with the region of the shipping point, will determine a Route.  The same determination procedure used by SD sales orders.
    When you are setting up your master data, and you have decided what the duration of transport time should be, it is important that your planned delivery time in your info records or in your material master be consistent with your shipping duration (pick/pack/route time).  This makes the execution (creation and shipment of STOs) stay consistent with planning (creation of STO purchase reqs) as far as timing is concerned.
    If your STOs use Deliveries, then the shipping information in the STO that was determined during creation (customer, shipping point, route, etc) will be copied to the delivery during delivery creation.
    Rgds,
    DB49

  • HT203167 I downloaded a ringtone last week for my iphone5 and it was active on my phone until I did a sync on the weekend with my laptop and now I find the ringtone has disappeared how do I reload it without being charged again?  I still have the tax invo

    I downloaded a ringtone last week for my iphone5 and it was active on my phone until I did a sync on the weekend with my laptop and now I find the ringtone has disappeared how do I reload it without being charged again?  I still have the tax invoice.

    Ringtones are currently a one-time only download, but if it's not on your phone and it hasn't copied over to the Tones section of your computer's iTunes library then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Minimum set of ACLs / security access required for getting MBeanHome and Runtime MBeans

    Hi,
    Where can I get information regarding the "minimum set" of ACLs and security access/permission
    required for
    a) Accessing weblogic.management.MBeanHome [Local and Admin interfaces] and RemoteMBeanServer
    interfaces
    b) Use MBeanHome and RemoteMBeanServer interface to look up MBeans [especially
    Runtime MBeans] for Cluster, Server instances, EJBs, JDBC, Execute Queues, etc?
    Any help or hint is appreciated!
    Regards,
    DKV

    "DKV" <[email protected]> wrote in message
    news:3f4e8429$[email protected]..
    >
    Hi,
    Where can I get information regarding the "minimum set" of ACLs andsecurity access/permission
    required for
    I believe this was answered in the management jmx newsgroup.

  • Read Only privileges for Access Server and Identity Server - OAM 10g

    Hi,
    I am working on Oracle Access Manager 10g version 10.1.4.
    I use an administrative account that is a member of the 'COREid Administrators' group to log into the access console and identity console of OAM.
    Since this is the administrative account, it has the rights to modify and update all access/identity entities.
    How can I set up an account that has "view only" privileges over all access and identity objects in OAM?
    I need to log into the access and identity consoles of OAM and view all policy domains/policies/access system configuration/user manager config/group manager config etc bt not be able to modify any of them.
    Is there a way to setup such an account in OAM?
    Regards,
    Abhishek.

    Hi Abhishek,
    It is possible to define different levels of administrator, but it is not possible to give an admin read access (to objects in the consoles) without also giving modify access. I do not believe that there is a straightforward way to meet this requirement - for the Access System you could use the Policy Manager API and write your own interface (which does not have the ability to modify) but obviously this would be some development effort.
    Regards,
    Colin

  • Authorization required for BADI

    Hi All,
    I have a query if someone can help.
    What authorizations are required by a user in backend to execute a badi in portal?
    Thanks in Advance for the help.
    Regards
    Srinivas

    Hi srinivas reddy ,
    BAPI should be remote enable and u need end user privilizes for accessing the predefined BAPI's. Just check it before you execute and make sure they are remote enabled.
    then your problem would be solved.
    thanks
    suresh

Maybe you are looking for

  • Fios Availabili​ty Error?

    I've moved into a new construction development that is basically 1 street. We're told from the construction manager that the entire street has been wired for Verizon Fios. When I check the availablity on the website and someone on the phone, houses o

  • How to stop and start Managed Server using weblogicServer

    Hi We are new. We have 2 managed servers and an Admin Server. We're trying to use the command line to stop/start our Managed Server. Could someone share examples on how one could write the command line that's similar to the WLS console Server Start t

  • Checked FAQ: Question about importing into library, need some assistance.

    Hi, I've done some searching and have yet find my answer. I hope that some of the sharpshooters here can help out. I keep all of my music on a network drive to avoid "bloating" my Mac with music. So the other day, I wanted to use iTunes to catalog wh

  • Has Apple killed the original Apple TV?

    We have three original Apple TVs, and one Apple TV 2. All used to be fine but in the last 6 months or so the old ones have become increasingly useless... Every time I try to use one of them, the "connected" computer is greyed out and therefore inacce

  • How can I get Firefox version 5? I use an application for banking that doesn't work with version 6 yet.

    I am using an application for banking with Bank of America that doesn't work with Firefox 6 so I need to install Firefox 5 until Bank of America can update their app to work with Firefox 6. Can you tell me how to find the download for Firefox 5? Than