Authorware error message on windows XP
I develop an application on authorware 5.1 to run in a
windows 2000 environment linked to an SQL data base, It is working
really well, but when I try to run it on Windows XP environment the
following error message appears as soon as the application starts
running:
"The procedure entry point tMsPrintDialog@0 could not be
located in the dynamic link library tMs_MP.dll"
I really do not understand what is the meanning or the
problem that brings up this error message.
Does anybody knows, what this is about?
Any help will be thanked in advance.
Regards, Ricardo
\
> "The procedure entry point tMsPrintDialog@0 could not be
located in the
> dynamic link library tMs_MP.dll"
>
> I really do not understand what is the meanning or the
problem that brings
> up
> this error message.
>
> Does anybody knows, what this is about?
>
Did you include the file tMs_MP.dll with your package?
Steve
ACE - Adobe Community Expert, Authorware
My blog -
http://stevehoward.blogspot.com/
Authorware tips -
http://www.tomorrows-key.com
Similar Messages
-
When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?
after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok. -
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
When i try to install i tunes i get error message 7 windows error message 126
When i try to install i tunes i get error message 7 windows error message 126
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304) -
I keep getting the error message "Restore Windows" When I click an icon on the desktop on my Mac Book Pro, it is not reaponding.
While holding down the option key, select "Go>Library" from the Finder. Navigate to the Preferences folder and you'll find "com.apple.finder.plist". Delete that file and restart.
Good luck,
Clinton -
i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system
In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application. If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work.
So, fire up Internet Explorer
Go here: http://get.adobe.com/flashplayer/
Follow the prompts, and then re-launch the application after you've completed the installation in IE. Hopefully that sorts it out for you. -
I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR, -
Does anyone know how to correct the download for itunes error message 7 windows 193?
I'm getting error message 7 (windows 193) when I download new itunes update.
Try Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
Lots of Anyconnect Error Message in Windows Event Log
Hi Community.
We have lots of Anyconnect Error Messages in the Windows Event Log. Following two examples.
Can anyone tell me why these errors appears and how do I fix them ? I already installed the newest Anyconnect on my machine.
Thanks in advance and Kind Regards Patrick
Example 1
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97564</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::logProbeFailure File: .\NetEnvironment.cpp Line: 1432 Invoked Function: CHttpProbeAsync::SendProbe Return Code: -27066354 (0xFE63000E) Description: HTTP_PROBE_ASYNC_ERROR_CANNOT_CONNECT HTTP (host: 109.164.211.237)</Data>
</EventData>
Example 2
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97565</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::TestAccessToSG File: .\NetEnvironment.cpp Line: 1385 Invoked Function: CNetEnvironment::analyzeHttpResponse Return Code: -28966899 (0xFE46000D) Description: NETENVIRONMENT_ERROR_PROBE_INCOMPLETE:Network Probe could not contact target</Data>
</EventData>HI and welcome to Discussions,
in my personal opinion there is not much for you to worry about.
The 'Windows Tool for the elimination of malware' is nothing you miss as long as you have a decent Anti-Virus Software running.
The update for the IE 7 might be missing an installed IE 7, which can do by downloading it yourself from Microsofts webpage.
If you don't use the IE but something like Firefox or Opera or Safari, than don't bother with these update.
Stefan -
Photoshop Elements 8.0 won't open, keep getting an Error message from windows
I am running Windows Vista on a toshiba laptop and I've owned the software for a little over a year now, everything was working quite fine the usual few crashes every once and a while. Though I had thought to myself oh well here it's time for some new photoshop brushes and fonts. So I went to sites such as Dafont.com and Deviantart.com to get brushes and fonts. Installed them all and tired to open up photoshop Elements afterwards and I kept getting an error message as shown in the picture.
Any help would be appericated, Also added information that may help, Yes I have tired removing the brushes out of the folder and running the program, and yes I have tried removing the fonts I installed. Neither worked. I also have not Restarted my laptop computer since I had installed that brushes/fonts.
Thank you for looking/reading/answering!
Have a nice day. (:Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry -
I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.Hotfix Released here:
http://support.microsoft.com/kb/2916846 -
Error message from Windows "Itunes has encountered a problem...."
...and needs to close. We're sorry for the inconvience."
I have reset, restored my ipod mini, and uninstalled, reinstalled my Itunes.
What is the problem? I can't download any music onto my ipod because this error message shows up and closes Itunes.
HELP!
Dell Windows XPhi sbeazell!
What is the problem? I can't download any music onto my ipod because this error message shows up and closes Itunes.
if you're getting that particular message when you're trying to sync the ipod, let's get a crash log to Apple so the engineers can look at it.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
So, get the machine setup to collect crash logs, do the thing that makes iTunes crash. Send it to the Discussions Hosts as well as information about what version of iTunes you're using, and when precisely itunes is crashing for you. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context.
let a host know
love, b -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
Error message on Windows 2003 and Satellite M40x-184
hi
my laptop is Satellite M40x-184
with Os Xp Home edition
I want to insatall a second Os which is Windows 2003
but while installing it, happend a problem and the gives me a blue screen with this message:
'hardware malfunction nmi parity check / memory parity error the system has halted'
Please tell me how i can install 2 Os xp home edition and Windows 2003
thanksHi
This error message can occur if a hardware component malfunctions, or if there are damaged or incompatible drivers installed.
To solve this problem remove any extra memory modules that are in the computer, leaving only the least amount that is required for the computer to start and run Windows. Restart the computer to see whether the error messages persist.
This issue was described on the Microsoft website.
Please check this site:
http://support.microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp
Maybe you are looking for
-
Using Dogpile, I search and a list of URLs comes up. I select and click on one and Firefox opens a new tab. It responds promptly with a blank screen. The Tab says "New Tab" and the URL says "about:blank". The last one came up slowly in IE and turned
-
After forced shut down iosx does not accept the password on the mcbook air
Hi there, I cannot login into the mcbook air after having to force a shut down. - While surfing with Safari, the mcbook froze for a longer period of time. - We forced the shut down pressing the on/off button. - After rebooting, we have a grayish scre
-
Customer exits for varibles in BeX selection screen
Dear All, I have two fields in BeX variable screen - 'Emp_id' and 'Dep_id'. The entry for 'Emp_id' is mandatory. But at the same time, if someone does not enter values for it, it should ask for 'Dep_id' atleast. If both are blank, then no execution.
-
Settle an AuC with investment support
Hello Gurus, I have the following problem: I have some AuC with investment support measure assigned. If I settle the AuC created in prior-years the system settle the costs and the investment support to the final assets but If I try to settle an asset
-
Ipod Classic won't display on Samsung HDTV
Hi, I searched the forums, and someone has already asked this but no one has been able to answer. I thought I'd try it because I'm desperate. I have an awesome brand new HDTV by Samsung. I went and purchased the component cables for my ipod classic.