AuthZ Policy "Monitor Only" mode

I have a question about the AuthZ Policy “Monitor Only” or "Audit" mode. I want to test a new AuthZ policy by using “Monitor Only” mode, but I am not seeing any indication that my Test device is hitting the rule while in Monitor only mode… It ends up hitting our last default rule which is currently permit any. If I actually enable the rule, I can see the device hitting the rule and getting denied in the Authentication log window.
So I know the rule works, but I want to only monitor the rule for now to see what would get denied, so that we can assess how we want to handle auth for said devices. According some info I found, I should be seeing an indication in the Auth log window that a rule was matched, if it is Monitor only mode.
I am currently running ISE 1.3.0.876.
Any help is appreciated

I have had the same experience. If you look at the AuthZ details for the connection, you will see under Other Attributes a special attribute returned named "RadiusAuthorizationPolicyMatchedMonitorRules," but as far as I know there is no way to run a report on it. Maybe someone else has a suggestion on it.
What I do as a workaround is create a rule matching the conditions and create a special Authorization Profile for the rule that just has ACCESS_ACCEPT (not to break any traffic), then run a RADIUS Authentication report matching that Authorization Profile.

Similar Messages

No audio when with second monitor attached and using Extend, Duplicate,or Second Screen Only modes

When I attached a second monitor via HDMI cable and try to use Duplicate, Extend, or Second Screen only display modes, I can get the video to display and run but I get no audio unless I set the notebook display settings to P/C Only mode. I really want to use the second screen for PowerPoint/Presenter View and play a embedded video (along with the sound). Even if I try to play a YouTube video I can only get audio when in P/C Screen Only mode. Any assistance would be greatly appreciated. Thank you.
This question was solved.
View Solution.

Hi,
Please disable HDMI sound to force audio back to the laptop or use different conection such as VGA or DVI. To diable HDMI sound, please right click speaker icon > playback devices > right click and disable HDMI sound.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Monitor only works in safe mode

My monitor only works in safe mode. when restart in normal mode the monitor screen is blank. when I start in safe mode the monitor works fine.

Is there a reason you have not entered the menu as I have suggested and reset the monitor to factory default?
Your old school monitor needs a kick in the pants to remind it that it is plug n' play. That is essentially what the reset will do. It won't hurt anything.
Was the TV you had connected to the PC before using the monitor an HDTV one with 1080p resolution?
In order to reinstall the graphics driver you will need to be logged in as a user with elevated (admin) priveleges. A standard user cannot install drivers or programs. You do not heed to reinstall RAID drivers.
You might need to consider replacing the monitor with a modern LCD display. They are quite inexpensive these days and can evven be found in the second hand market.
If you don't want to do that then you can remove the video card and then connect the monitor VGA cable to the video output port on the rear of the desktop PC. Removing the card will enable the onboard video.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Read-only mode. Object is currently locked by user: J2EE_ADMIN. hw 2 unlock

Hi friends,
<b>i am not able to edit my object in EP</b> , it says
Read-only mode. Object is currently locked by user: J2EE_ADMIN.
how do i unlock it ?
i am on 04s SP9

Hi Rohit,
Navigate to
system_admin -> Monitoring->
Portal->object_locking->
There you can view your locked pcd object.Just check it and Unlock.
That should solve your problem.
Hope this helps
Regards
Vineeth

External monitor only works with clam shell open

external monitor only works with clam shell open

Are you using the method in this Apple article? If you do, it should work.
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display

"Device Manager is running in read-only mode because you are running it on a remote computer" when local

Hello - since configuring a Windows Web Server 2008 R2 x64 to be hardened for an internet-facing deployment I receive this:
"Device Manager is running in read-only mode because you are running it on a remote computer."
when entering Device Manager.
I have tried reversing the changes I have made, such as:
- Re-adding Client for Microsoft Networks
- Re-enabling NetBIOS over TCP-IP
- Re-adding File and Printer Sharing
- Disabling the Windows Firewall in all profiles (public, domain, private)
I get no joy. It looks like a Microsoft ballsup. I'll try and use Process Monitor to have a look. Google returns only 1 page for this error.
Luke

Got it.
After my changes to DHCP and static IPs the machine picked up the IP address of another server on my little home LAN. The hostname in IPCONFIG was different to the actual server computer name and so this led Device Manager to think the connection and the
local machine were different.
What an odd and infuriating problem. My thoughts on this are that Microsoft should be more verbose with error messages and their causes. For example, displaying the values of the assertion would help diagnose a problem; "The host-name www02.farm.brand.com
that you are connecting from does not match the local host-name rest01.dev.farm.brand.com. Connections from remote computers can only use Device Manager in read-only mode; some options will be disabled."
When troubleshooting, the main thing on an engineer's mind is "what has led Windows to its [unexpected] conclusion?"
Luke

TG4MSQL ora-28500 error on RECOVER login in READ-ONLY mode

We're connecting from a 10.2 dbase to SqlServer2000 via TG4MSQL. No upfront problem connecting but the Oracle .trc file shows below error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'RECOVER'. (SQL State: 00000; SQL Code: 18456)
Below is the content of .ora file:
HS_FDS_CONNECT_INFO=INETSQL3.ComPro
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_TRANSACTION_MODEL=READ_ONLY
We are using READ-ONLY mode so the RECOVER login was not defined on SqlServer.
Anyone know why TG4MSQL is trying to open a connection as RECOVER? And is there a way to stop it?

Pending transactions turned out to be the culprit. Below is info from our TAR that
provides some detail on what RECOVER is doing.
Oracle handles all transactions as if they were distributed transactions. He takes a very conservative approach on the assumption that you may want to update
or insert later. This has been like this since Oracle version 6 and will never
change. Hence all transactions get handled as a distributed transactions even though there are no simultaneous updates. A common remote transaction would involve reading from SQL Server and then taking that data an inserting into an Oracle database. In the event a transaction gets aborted for some reason RECO must rollback the transaction. SQL Server requires a valid username/password and hence uses the recovery username/password specified in the gateway init file. The default parameters for both are RECOVER , if they are omitted in the init.ora file for the gateway. Obviously these do not exist on SQL Server. Note that this recovery process is detected and processed by the Oracle kernel. READONLY mode only prevents inserts, updates or deletes to be issued to SQL Server and nothing else. The gateway has nothing to do with handling and monitoring transactions to SQLServer. In all likelyhood you have several in doubt transactions in the dba_2pc_pending view. As long as those entries remain RECO will continue to try and rollback these in doubt transactions and fail each time due to an invalid username/password. This will go on until you either manually remove them or give RECO a valid SQL Server username/password to use.
OPTION 1
==========
Code the follwing in your gateway init.ora file
HS_FDS_RECOVERY_ACCOUNT=use the username specified in your db_link
HS_FDS_RECOVERY_PWD=use the password specified in your db_link
OPTION 2
==========
Define a username with password RECOVER on the SQL Server database you are connecting to
OPTION 3 (Manually removing in doubt transactions)
================
Use dbms_transaction.purge_lost_db_entry(local_tran_id)
STATUS should be in collecting
Please see Metalink
Note.126069.1 Ext/Pub Manually Resolving In-Doubt Transactions Different Scenarios
for detailed information

SRX400 problem, WTR54GX4 G-Only Mode?

Devices:
WUSB54GX4 wireless adapter with SRX400
WRT54GX4 wireless router with SRX400
Problem:
Wireless adapter drops association when router is toggled from MIXED mode to G-ONLY mode. In addition, the linksys monitor always reports 11Mbs. Appears as if the wireless adapter is 802.11b only.
Additional Info:
Works fine while router is in MIXED mode. Router firmware and wireless adapter driver are both current. Have uninstalled and reinstalled numerous times. Switching to Windows XP 'zero configuration' utility makes no difference.
Anyone else seen this, or have any suggestions?

hi....yes i have seen this before....and i was not able to use the G only mode....though it was not necessary for it...never got the 11Mbps though....works at 54Mbps for me on all wireless PC's in the mixed mode...
my wireless setting are :-
SSID :- my own
channel - 11
beacon intereval = 50
RTS :- 2306
Fragmentation 2307

Thinkpad T60p with Win XP - Lost color on external monitor (only black & white)

Hi, I have a ThinkPad T60P, and a couple of weeks ago, I lost color on my external monitor (connected by VGA cable)
I have done a lot of testing, and found a couple of strange things around this:
* when using docking station with two monitors, only monitor nr "1" inCatalyst Control Center shows colors, but not "2".
* When using external monitor (or projector) I don't get color
* When showing video on the external monitor, color works(!) This is only on some type of videos, I think. Flash videos (ie. YouTube does not show colors)
* When getting a bluescreen, the external monitor displays bluescreen with colors. When rebooting after bluescreen, colors were working while booting (windows logo with colors), but as soon as XP was up, colors were gone(!)
* I have tried updating to the latest graphics driver (79d533ww.exe), and all the settings in Catalyst Control Center / Control Panel
As a result of these findings, I beleive it must be a software problem, but since upgrading the drivers didn't work, I don't know what to try next.
I see also that there are other people experiencing the same problems, but I can't find any solution to this problem.
Re:
http://forum.notebookreview.com/showthread.php?p=3597258
Hope someone can help me here!
Best regards,
pmlovold

Cats seem to have a strong affinity for that display mode — remarkably often we hear that they've typed in the correct keystroke combo for it, and yet they never seem to set it back to normal after using the computer. Not very considerate, but you know cats: consideration isn't part of the package.

T400 powers on in "projector only" mode

My T400 turns on and awakes from sleep in "Projector Only" mode. The screen is black, and I have to press Fn+F7 to toggle out of the mode back to "computer only"
Does anyone know how to default turn on in "computer only"/fix this problem?

Does this happen even if you don't have an external monitor plugged in?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How to provide a LINK on normal TEXT field in read only mode

Hi,
I have a TEXT item and that is used for only url purpose.
so a user can enter something like http://www.abc.com in that field.
So when I am in read only mode for that item, I want a link also on that text..
how can I do that.
thanks,
Deepak

You could create a pl/sql expression computation on the TEXT item which will convert the value shown for the field to be a HTML link
'<a href="http:// ' || :PXX_TEXT || '">' || :pXX_TEXT || '</A>';Make the computation conditional using the same condition as is used to render the item as read-only
varad

Jabber phone-only mode in CUCM 8.6

Hi everybody! I heard that jabber can be used in phone only mode without the need of CUPS, but im wondering if it will work with CUCM8.6? I have seen configuration examples for CUCM 9, but there were some things that are missing in 8.6, like Service Profiles in users configuration. If yes then some config guides would be appreciated.
Thanks

I'm not sure but i think that Jabber supported only presence or webex.
when you install the jabber you see the two options.
Therefore, considering that i think that jabber can't work in mode desk phone of soft phone only with cucm.
read the datasheet of Cisco Cucilync, it similar to Jabber and it can work with cucm only.
actually, Cucilync provides integration between Cisco ip phones and lync of Microsoft, but you can use that without lync.

Issue regarding open word file and read only mode using c# & MS-word interop

i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
            object fileName = "";
            string filePath = "";
            string strSaveasPath = "";
            DialogResult result = openFileDialog1.ShowDialog();
            if (result == DialogResult.OK)
                fileName = openFileDialog1.FileName;
                //strSaveasPath = Path.GetDirectoryName(path.ToString());
            //fileName = "Z:\\C0000000003.doc";
            List<string> _list = new List<string>();
            _list.Add("tridip");
            _list.Add("arijit");
            //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
            object textToFind = "test";
            object readOnly = false;
            Word.Application word = new Word.Application();
            Word.Document doc = new Word.Document();
            object missing = Type.Missing;
            try
                doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing);
                doc.Activate();
                object matchPhrase = false;
                object matchCase = false;
                object matchPrefix = false;
                object matchSuffix = false;
                object matchWholeWord = false;
                object matchWildcards = false;
                object matchSoundsLike = false;
                object matchAllWordForms = false;
                object matchByte = false;
                object ignoreSpace = false;
                object ignorePunct = false;
                object highlightedColor = Word.WdColor.wdColorGreen;
                object textColor = Word.WdColor.wdColorLightOrange;
                object missingp = false;
                Word.Range range = doc.Range();
                foreach (string line in _list)
                    textToFind = line;
                    bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
                System.Diagnostics.Process.Start(fileName.ToString());
            catch (Exception ex)
                Console.WriteLine("Error : " + ex.Message);
                //Console.ReadKey(true);
            finally
                //doc.Close(missing, missing, missing);
                if(doc!=null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                if (word != null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                word = null;
                doc = null;
                GC.Collect();
                GC.WaitForPendingFinalizers();

I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

I am not able to use Firefox with Sharepoint - I can only open a file in read-only mode and cannot checkout the document and edit.

I would like to use Firefox with Sharepoint.
However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.

This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

ALV: columns in read-only mode look like editable columns in edit mode

Hi,
My application contains an ALV table which should be toggled between display and edit mode like the rest of the fields.
The evident solution was to use
if_salv_wd_table_settings~set_read_only( abap_true or abap_false)
However, unlike the rest of the fields, when the application changes into display mode and the fields get grey like in any SAP application, the columns in the table which were editable remain white, and those which were not editable and thus grey, get now white, too, instead of the other way round. So it will look to the normal user, as if now all columns would be editable!
Of course, he would realize that they are not when he tries to edit them, but this is irritating.
See following link with screenshots (only active for 3 weeks from now on):
[Link to my webmail space/SDN: .|https://businesswebmail.telekom.at/filestorage/MzYxMTk1OTMx/]
I have looked
through my books ("Einstieg in Web Dynpro for ABAP", "Praxisbuch Webdynpro for ABAP", ...)
through the wiki for Webdynpro for ABAP here in SDN as well as through this forum (by searching with "ALV edit")
through the notes in BC-WD-CMP-ALV
but could not find any solution. Most tables in those PDF articles found here in the WD4A wiki also show white cells although they are probabliy in read-only mode (e.g. the imitation of the SE16N browser article).
The attributes to the LO_CELL_EDITOR for both Inputfields and textview columns contain exactly the same values when toggling between display and edit mode (read-only in table settings), so also no chance to change here anything.
Also changing the cell design is not a solution as there is no design that looks like grey for not editable according to WDUI_TABLE_CELL_DESIGN ([SAP Help - WDUI_TABLE_CELL_DESIGN|http://help.sap.com/saphelp_nw2004s/helpdata/en/56/5e9041d3c72e7be10000000a1550b0/frameset.htm].
I do not know if I have made an error, as this is my 3rd Web Dynpro (after the first 2 of the introduction book), or SAP is really inconsistent in User interface between "normal" fields and ALV table fields.
Can you please help me?
Thanks in advance,
Erlend

Hi,
In my application aslo, i have 30 columns out of which 10 are input fields. But, i'm showing the table as ABAP_TRUE incase of Non-editable otherwise to abap_false. Now i'm getting everything as in WHITE cells.
Do you want to show it is Grey mode with Non-editable feature. Is that so.
How many columns are there which has Input fields.
Get the column references.
Now, based on the mode of display create the object as Input or Textview field.
For that column -
If mode eq 'D'.
Create an object for Textview(cl_salv_wd_uie_text_view)
else.
Create an Object for Inputfield(cl_salv_wd_uie_input_field)
endif.
The Append row is a standard button or custom one on ALV toolbar.
Do you want to hide the toolbar or just disable these buttons.
If you want to hide the toolbar then refer my wiki -
http://wiki.sdn.sap.com/wiki/display/WDABAP/NullreferenceforUPDATETOOLBARerrorsofALVinthewebdynpro+ABAP
Regards,
Lekha.
Edited by: Lekha on Sep 30, 2009 8:06 PM

AuthZ Policy "Monitor Only" mode

Similar Messages

Maybe you are looking for