Autmatically dating in a template
I use Pages to create sales quotes. I have a template and I want the date I create the template quote to automatically fill in the date field and the date 30 days away to automatically fill in the "quote valid until" field. Suggestions?
Thanks.
Spreadsheet insertion is a missing feature of Pages. Tables and the formula editor are too weak for this purpose. You'd be better served using NeoOffice or Office for Mac.
Kurt
Similar Messages
-
Unable to find published output for this request
Hi All:
I have created a XML report (Data Template and the RTF) in EBS and the program runs fine.
Then I changed/modified the Data Template and updated the xml file. When I try to run the report after the change
the report completes normal but have no output and gives me "Unable to find published output for this request"
I can not figure out what I am missing..
Please help
Thanks,Hi Octavio:
Thanks, This was helpful.
It works after I end dated the RTF template and then run the program again. Now I have the XML with my changes in and then I can modify the RTF and upload it again..
Thanks
Edited by: user10800212 on Jan 29, 2009 9:32 AM -
In Pages 5, how to get date to automatically update upon opening a template?
I'm using Pages 5.2. In prior versions of Appleworks and Pages I was able to construct and save a template in which the date would automatically update to the current date when the template was opened. I have tried "Insert Date" and I can click on that to update to current date, but I don't always remember to do that and therefore, some of my documents are dated several months prior.
Can't seem to find how to do it under Pages 5.2 Anyone have help or a work around?I have the same problem.
What confuses me is that all the apple provided templates in pages seem to auto update their time and date upon opening.
So there MUST be a way to do it... although I've been unable to work out how...
Amnon -
Default a rtf template for a Xml publisher report!
Hello,
How to default a layout template if multiple templates are registered for a Data template?
and also how to delete a template?
Thanks,Thank you all for the reply. I was talking about Xml publisher with EBS.
As said...we can not delete the template but we can end date it and we can set the default template from the system administration responsibility.
One more question regarding this : When we migrate the xml publisher seed data for this report( which include template which was endated) to other instance ( let say Development to Test)....we are unable to see the template in the test instance. All i meant was can we migrate the template which is end dated to other instance with the data definition?? -
About the template FSCM9.1 FP2 Peopletools 8.52.03 (v4 - July 2012)
Hello,
Just tested quickly this new template delivered 2 months ago (July 2012).
As far as I undestand, it is just a recut of the one delivered in April 2012. At least it solves the main issue I reported in that other About the template FSCM9.1 FP2 Peopletools 8.52.03 (v3) about the network prompt missing.
But I still have remarks/issues on the template FSCM9.1 FP2 Peopletools 8.52.03 (v4) released earlier in July 2012.
_1. First of all, there a lot of errors reported in /var/log/messages_
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.883:3): avc: denied { read } for pid=92 comm="restorecon" name="libc.so.6" dev=xvda2 ino=21 scontext=system_u:sys
tem_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.910:4): avc: denied { execute } for pid=92 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:5): avc: denied { read } for pid=296 comm="pam_console_app" name="ld.so.cache" dev=xvda2 ino=94143 scontext=s
ystem_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:6): avc: denied { getattr } for pid=290 comm="pam_console_app" path="/etc/ld.so.cache" dev=xvda2 ino=94143 sc
ontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:7): avc: denied { read } for pid=293 comm="pam_console_app" name="libc.so.6" dev=xvda2 ino=21 scontext=system
_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:8): avc: denied { execute } for pid=293 comm="pam_console_app" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 sco
ntext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: input: PC Speaker as /class/input/input3
Sep 13 05:02:55 localhost kernel: Initialising Xen virtual ethernet driver.
Sep 13 05:02:55 localhost kernel: Error: Driver 'pcspkr' is already registered, aborting...
Sep 13 05:02:55 localhost kernel: Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Sep 13 05:02:55 localhost kernel: floppy0: Unable to grab IRQ6 for the floppy driver
Sep 13 05:02:55 localhost kernel: lp: driver loaded but no devices found
Sep 13 05:02:55 localhost kernel: md: Autodetecting RAID arrays.
Sep 13 05:02:55 localhost kernel: md: Scanned 0 and added 0 devices.
Sep 13 05:02:55 localhost kernel: md: autorun ...
Sep 13 05:02:55 localhost kernel: md: ... autorun DONE.
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda2, internal journal
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526929.896:9): avc: denied { execute } for pid=965 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext
=system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda1, internal journal
Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 05:02:55 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvdb1, internal journal
Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526930.647:10): avc: denied { execute } for pid=989 comm="setfiles" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526942.398:11): avc: denied { net_admin } for pid=990 comm="setfiles" capability=12 scontext=system_u:system_r:setfiles
_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=capability
Sep 13 05:02:55 localhost kernel: hrtimer: interrupt took 35229469 ns
Sep 13 05:02:55 localhost kernel: Adding 2104504k swap on /dev/xvda3. Priority:-1 extents:1 across:2104504k SS
Sep 13 05:02:55 localhost kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23.
Sep 13 05:02:55 localhost kernel: Loading iSCSI transport class v2.0-870.
Sep 13 05:02:55 localhost kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Sep 13 05:02:55 localhost kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Sep 13 05:02:55 localhost kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (cxgb3i)
Sep 13 05:02:55 localhost kernel: NET: Registered protocol family 10
Sep 13 05:02:55 localhost kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
Sep 13 05:02:55 localhost kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Jan 06, 2010)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (bnx2i)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (tcp)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (iser)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (be2iscsi)
Sep 13 05:02:55 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Sep 13 05:02:55 localhost kernel: warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526970.336:12): avc: denied { sys_tty_config } for pid=1374 comm="consoletype" capability=26 scontext=system_u:system_r
:consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
Sep 13 05:02:55 localhost kernel: RPC: Registered udp transport module.
Sep 13 05:02:55 localhost kernel: RPC: Registered tcp transport module.
Sep 13 05:02:55 localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 13 05:03:00 localhost automount[1769]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Sep 13 05:03:59 localhost kernel: type=1400 audit(1347527039.771:13): avc: denied { sys_tty_config } for pid=2029 comm="consoletype" capability=26 scontext=system_u:system_r
:consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
Sep 13 05:04:00 localhost NET[2061]: /sbin/dhclient-script : updated /etc/resolv.conf
Sep 13 05:04:01 localhost kernel: IPv6 over IPv4 tunneling driver
Sep 13 05:04:01 localhost NET[2219]: /opt/oracle/psft/vm/oraclevm-template.sh : updated /etc/resolv.conf
Sep 13 05:04:08 localhost NET[2472]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
Sep 13 05:06:08 localhost restorecond: Reset file context /etc/resolv.conf: system_u:object_r:etc_runtime_t:s0->system_u:object_r:net_conf_t:s0
Sep 13 05:08:19 localhost kernel: Slow work thread pool: Starting up
Sep 13 05:08:19 localhost kernel: Slow work thread pool: Ready
Sep 13 05:08:19 localhost kernel: FS-Cache: Loaded
Sep 13 05:08:19 localhost kernel: FS-Cache: Netfs 'nfs' registered for caching
Sep 13 05:08:19 localhost kernel: svc: failed to register lockdv1 RPC service (errno 97).
...Well, I don't know if it triggers others problems yet, but the last line could reveale an error within the /etc/hosts file which has not been properly modified during deployment (especially IPV6, it probably should be removed) :
[root@psovmfscmfp2 /]# more /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.1.150 psovmfscmfp2.phoenix.nga psovmfscmfp2
[root@psovmfscmfp2 /]#_2. Now about the COBOL_
Despite I choosed to install Microfocus, COBOL does not work. Sample COBOL processes such as PTPDBTST and PTPDTTST finished in error.
The log is empty, here below the output from the file $PS_CFG_HOME/psft/pt/8.52/appserv/prcs/PRCSDOM/LOGS/stdout (psadm2) :
=================================Error===============================
Message: Process 10899 is marked 'Initiated' or 'Processing' but can not detect status of PID
Process Name: PTPDBTST
Process Type: COBOL SQL
Session Id: 9313
=====================================================================
OprId = VP1Note that I successfully tested AEs and SQRs.
Here is the command line fired that I can see from the process monitor > parameter (nga is being my run control id) :
PSRUN PTPDBTST ORACLE/F91TMPLT/VP1/OPRPSWD/nga/10899//0 I used the following trace setting on the PTPDBTST's process parameter (override) to see what happens :
%%DBTYPE%%/%%DBNAME%%/%%OPRID%%/%%OPRPSWD%%/%%RUNCNTLID%%/%%INSTANCE%%//%%DBFLAG%%But it does not generate more logs...
I also use "RCCBL Redirect =1" in psappsrv.cfg (reconfigure and restart appdom), then start the COBOL through menu PeopleTools > Utilities > Debug > PeopleTools Test Utilities, and run a "Remote Call Test".
I received "COBOL Program PTPNTEST aborted (2,-1) FUNCLIB_UTIL.RC_TEST_PB.FieldChange PCPC:2143 Statement:26", but it generated two empty files (PTPNTEST_VP1_0913064910.out and PTPNTEST_VP1_0913064910.err).
Next step, checking the folder $PS_HOME/cblbin, it is...er... empty... does this mean COBOL have not been compiled ? Hmmm, I'm pretty sure I replied 'yes' when it was prompted though (still have the screenshots)...
And we can see several folders dated from today and license seems ok from Microfocus directories :
[psadm1@psovmfscmfp2 tools]$ cd /opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ ls -lrt
total 264
-r--r--r-- 1 root root 10455 Nov 19 2009 ADISCTRL
dr-xr-xr-x 10 root root 4096 Nov 19 2009 terminfo
dr-xr-xr-x 2 root root 4096 Nov 19 2009 xdb
-r--r--r-- 1 root root 11949 Nov 19 2009 eslmf-mess
dr-xr-xr-x 2 root root 4096 Nov 19 2009 include
dr-xr-xr-x 17 root root 4096 Nov 19 2009 lang
dr-xr-xr-x 4 root root 4096 Nov 19 2009 es
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dynload
drwxrwxrwx 2 root root 4096 Nov 19 2009 deploy
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dynload64
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dialog
dr-xr-xr-x 2 root root 4096 Nov 19 2009 cpylib
dr-xr-xr-x 8 root root 28672 Nov 19 2009 lib
dr-xr-xr-x 3 root root 4096 Nov 19 2009 snmp
dr-xr-xr-x 8 root root 4096 Nov 19 2009 src
dr-xr-xr-x 28 root root 4096 Nov 19 2009 demo
dr-xr-xr-x 6 root root 4096 Nov 19 2009 docs
-rw-r--r-- 1 root root 49 Sep 13 05:13 license.txt
-r-xr-xr-x 1 root root 12719 Sep 13 05:13 install.orig
-r-xr-xr-x 1 root root 13006 Sep 13 05:13 install
dr-xr-xr-x 6 root root 4096 Sep 13 05:13 lmf
dr-xr-xr-x 2 root root 4096 Sep 13 05:13 aslmf
dr-xr-xr-x 6 root root 4096 Sep 13 05:15 etc
dr-xr-xr-x 4 root root 12288 Sep 13 05:15 bin
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ more license.txt
I
ORACLE-30DAYDEV64
01030 A0780 014A6 7980B A17CSo let's assume it has been properly installed and let's compile the COBOLs. Here we go :
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ cd $PS_HOME/setup
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
Source: /opt/oracle/psft/pt/tools/src/cbl/
Target: /opt/oracle/psft/pt/tools/src/cblunicode/
Number of Copy Libraries Read: 71
Modified: 71
Not Modified: 0
Number of Programs Read: 44
Modified: 44
Not Modified: 0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak: line 249: cob: command not found
cp: cannot stat `PTPCBLAE.gnt': No such file or directory
cp: cannot stat `PTPCBLAE.int': No such file or directory
cp: cannot stat `PTPCBLAE.lst': No such file or directory
...What about env. variables ? COBDIR, COBPATH and COBOL do not appears anywhere in PATH...
[psadm1@psovmfscmfp2 setup]$ env|grep -i cobol
[psadm1@psovmfscmfp2 setup]$Let's set the env variables as we could expect to be (page 27, step 17 of the given doc), and retry to compile the COBOL :
[psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
[psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
Source: /opt/oracle/psft/pt/tools/src/cbl/
Target: /opt/oracle/psft/pt/tools/src/cblunicode/
Number of Copy Libraries Read: 71
Modified: 71
Not Modified: 0
Number of Programs Read: 44
Modified: 44
Not Modified: 0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
Micro Focus LMF - 010: Unable to contact license manager. This product has been unable to contact the License Manager. Execution of this product has been terminated. This product cannot execute without the License Manager. Contact your license administrator or refer to the 'Information Messages' chapter of the License Management Facility Administrator's Guide.
cob64: error(s) in compilation: PTPCBLAE.cbl
cp: cannot stat `PTPCBLAE.gnt': No such file or directory
cp: cannot stat `PTPCBLAE.int': No such file or directory
cp: cannot stat `PTPCBLAE.lst': No such file or directory
...Ok, maybe a bit better, at least it is trying to contact LMF. Probably the LMF is not started. Let's try to start it :
[root@psovmfscmfp2 microfocus]# ./mflmman
MF-LMF:Thu Sep 13 07:19:37 2012: LMF Starting
[root@psovmfscmfp2 microfocus]#Good, it is starting, it means it wasn't (sic). Now retry to compile :
[psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
[psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
Source: /opt/oracle/psft/pt/tools/src/cbl/
Target: /opt/oracle/psft/pt/tools/src/cblunicode/
Number of Copy Libraries Read: 71
Modified: 71
Not Modified: 0
Number of Programs Read: 44
Modified: 44
Not Modified: 0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCURND.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPDBTST.cbl ...
<snipped>
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPWLGEN.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL programs have been successfully compiled.
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : The COBOL executables were copied to /opt/oracle/psft/pt/tools/cblbin
rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLP1.cbl': Permission denied
rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLUP.cbl': Permission deniedIt looks better, I think the last lines marked with "Permission denied" can be safely be ignored.
Those files are owned by psadm3 with a read only for other users (sic). But more concern, I'm wondering why it looks into apptools (???) whereas I'm using psadm1 (tools only, COBPATH=/opt/oracle/psft/pt/tools/cblbin).
Anyway, seems the *.gnt files required to run the COBOLs programs are now in bin :
[psadm1@psovmfscmfp2 setup]$ ls /opt/oracle/psft/pt/tools/cblbin
PTPCBLAE.gnt PTPDTTST.gnt PTPECOBL.gnt PTPLOGMS.gnt PTPRATES.gnt PTPSQLGS.gnt PTPTESTU.gnt PTPTSCNT.gnt PTPTSLOG.gnt PTPTSTBL.gnt PTPTSWHR.gnt
PTPCURND.gnt PTPDTWRK.gnt PTPEFCNV.gnt PTPMETAS.gnt PTPRUNID.gnt PTPSQLRT.gnt PTPTESTV.gnt PTPTSEDS.gnt PTPTSREQ.gnt PTPTSUPD.gnt PTPUPPER.gnt
PTPDBTST.gnt PTPDYSQL.gnt PTPERCUR.gnt PTPNETRT.gnt PTPSETAD.gnt PTPSTRFN.gnt PTPTFLDW.gnt PTPTSEDT.gnt PTPTSSET.gnt PTPTSUSE.gnt PTPUSTAT.gnt
PTPDEC31.gnt PTPECACH.gnt PTPESLCT.gnt PTPNTEST.gnt PTPSHARE.gnt PTPTEDIT.gnt PTPTLREC.gnt PTPTSFLD.gnt PTPTSTAE.gnt PTPTSWHE.gnt PTPWLGEN.gnt
[psadm1@psovmfscmfp2 setup]$Have a try to link COBOLs :
[psadm1@psovmfscmfp2 setup]$ ./psrun.mak
./psrun.mak - linking PSRUN for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
./psrun.mak - Successfully created PSRUN in directory: /opt/oracle/psft/pt/tools/bin
./psrun.mak - linking PSRUNRMT for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
./psrun.mak - Successfully created PSRUNRMT in directory: /opt/oracle/psft/pt/tools/bin
[psadm1@psovmfscmfp2 setup]$The err files are empty :
-rw-r--r-- 1 psadm1 oracle 0 Sep 13 07:26 psrun.err
-rw-r--r-- 1 psadm1 oracle 0 Sep 13 07:26 psrunrmt.errSo far, so good now. We are able to test again the sample COBOL... until next failure.
Yes, unfortunately, it fails again. But good thing, the log is not empty now :
PSRUN: error while loading shared libraries: libcobrts64.so: cannot open shared object file: No such file or directoryThat's probably coming from some missing libraries during the psprcs.cfg configuration. Let's use the same env. variables settings as for psadm1 when compiling COBOLs.
[psadm2@psovmfscmfp2 appserv]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm2@psovmfscmfp2 appserv]$ export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
[psadm2@psovmfscmfp2 appserv]$ export PATH=$COBDIR/bin:$PATH
[psadm2@psovmfscmfp2 appserv]$ ./psadminReconfigure, restart prcs and re-test... SUCCESSFULLY !!!!!!!!!!!!!!!!!!!!!!!!!
Log from PTPDBTST process shows :
SUCCESSFUL DATABASE CONNECTION
SUCCESSFUL DATABASE DISCONNECTWhat a pain !
I did not go further, but we could expect the same issue within the Application COBOLs, since the cblbin directory is also empty out there.
According to psprcs.env, there're two values for COBDIR and the one for the applications cobol is empty :
[psadm2@psovmfscmfp2 PRCSDOM]$ more psprcsrv.env
INFORMIXSERVER=192.168.1.149
COBPATH=/opt/oracle/psft/pt/apptools/cblbin:/opt/oracle/psft/pt/tools/cblbin
PATH=/opt/oracle/psft/pt/apptools/bin:/opt/oracle/psft/pt/apptools/bin/interfacedrivers::/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:/opt/oracle/psft/pt/tools/appserv:/opt
/oracle/psft/pt/tools/setup:/opt/oracle/psft/pt/tools/jre/bin:/opt/oracle/psft/pt/bea/tuxedo/bin:.:/opt/oracle/psft/pt/oracle-client/11.2.0.x/bin:/opt/oracle/psft/pt/oracle-clie
nt/11.2.0.x/perl/bin:/usr/local/bin:/bin:/usr/bin:/opt/oracle/psft/pt/tools/bin:/opt/oracle/psft/pt/tools/bin/sqr/ORA/bin:/opt/oracle/psft/pt/tools/verity/linux/_ilnx21/bin:/hom
e/psadm2/bin:.
[psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/apptools/cblbin
[psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/tools/cblbin
PTPCBLAE.gnt PTPDTTST.gnt PTPECOBL.gnt PTPLOGMS.gnt PTPRATES.gnt PTPSQLGS.gnt PTPTESTU.gnt PTPTSCNT.gnt PTPTSLOG.gnt PTPTSTBL.gnt PTPTSWHR.gnt
PTPCURND.gnt PTPDTWRK.gnt PTPEFCNV.gnt PTPMETAS.gnt PTPRUNID.gnt PTPSQLRT.gnt PTPTESTV.gnt PTPTSEDS.gnt PTPTSREQ.gnt PTPTSUPD.gnt PTPUPPER.gnt
PTPDBTST.gnt PTPDYSQL.gnt PTPERCUR.gnt PTPNETRT.gnt PTPSETAD.gnt PTPSTRFN.gnt PTPTFLDW.gnt PTPTSEDT.gnt PTPTSSET.gnt PTPTSUSE.gnt PTPUSTAT.gnt
PTPDEC31.gnt PTPECACH.gnt PTPESLCT.gnt PTPNTEST.gnt PTPSHARE.gnt PTPTEDIT.gnt PTPTLREC.gnt PTPTSFLD.gnt PTPTSTAE.gnt PTPTSWHE.gnt PTPWLGEN.gnt
[psadm2@psovmfscmfp2 PRCSDOM]$The directory "/opt/oracle/psft/pt/apptools/cblbin" is owned by psadm3 and hosted on the database server (nfs mounted), so I assume we also need to set proper values for env variables, and compile the COBOLs before being able to use them.
To resume what I did to make the COBOLs working on this PSOVM :
1. As root, start LMF (this has to be done only once)
cd /opt/oracle/psft/pt/cobol/microfocus
./mflmman
2. As psadm1, set proper env. variable and compile (setting env variable has to be done each time you want to compile COBOLs)
export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
export PATH=$COBDIR/bin:$PATH
cd $PS_HOME/setup
./pscbl.mak
./psrun.mak
3. As psadm2, set proper env. variable and reconfigure psprcs.cfg, restart, restart (setting env variable has to be done each time you want to start the process scheduler, so probably better to append these in the .bash_profile)
export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
export PATH=$COBDIR/bin:$PATH
cd $PS_HOME/appserv
./psadmin
4. Same as step 2, but with user psadm3.
HTH,
Nicolas.
PS: will it be the same issue on the HCM template delivered at the same time ? To be tested as well.
PS2: and yes, I tested it twice before posting, result is same.
Edited by: N Gasparotto on Sep 13, 2012 5:17 PMFortunately, the COBOL issue does not exist on PSOVM HCM9.1 FP2 PT8.52.06 delivered in July 2012 (v3). COBOL are properly compiled (tools and app COBOLs), cblbin is not empty and they run successfully on the first shot.
Nicolas. -
Need Expertise on Custom Photo Gallery Template
Hello there - this question isn't really just Mac specific, but I don't see a forum that will post to ALL Photoshop users.
I'm in need of some help customizing a Photo Web Gallery in Photoshop. I've done one entirely without tables, using my own CSS to style it. My thumbnail page would be similar to the coding for the index page of the Lightbox styled gallery in this tutorial: www.photoshoplab.com/lightbox-web-photo-gallery.html
However, my problem is that even though my design doesn't use tables, when I'm in the automation dialogue in Photoshop, it still shows the table row and column parameters - greyed out - from the last time a table-based gallery template was used. And Photoshop is using this info to decide how many thumbnails to put on the gallery index page. It simply multiplies the row * column to limit the number of thumbnails on that first page. Very odd and not very nice looking, as it won't finish a row this way.
I notice the Lightbox styled gallery template does away with the table for the thumbnails as well. How, then can I gain control over showing "X" number of images per thumbnail page? Say I have a gallery of 40 images - how can I show 20, max, per page? Or 10? Or whatever needs to be specified to suit the number of images in that gallery?
Also, at runtime, Photoshop is stripping some small but important bits of code out of my customized templates. I've tried to put some HTML elements in to force the "previous next" text below the thumbnails, but it gets stripped out during the generation of the gallery.
The results can be seen here:
www.springfieldmo.gov/cityconnect/images/galleries/dating/index.html
Notice that the first thumbnails page shows 21 images. That's because the greyed out row, column info in the automate dialogue was 3 rows of 7 columns.
Is there any way to get to the actual code that Photoshop runs to generate the galleries? Seems like that's where it would be looking for the table info.
Any thoughts? I'd sure appreciate any info you can give or point me to someone who has done a pure CSS automated Photoshop gallery.
Sincerely,
Christopher Akins
Web Coordinator
City of Springfield, MOThanks Curt, In fact I think I have found the files under
user\Application Data\Adobe\Bridge CS5\Adobe Output Module\MediaGallery\
I got there as a result of your suggestion and although I didn't find /roaming/ I did find the following directories
/document1/
/preview/
/previewinbrowser1/
So I am guessing these contain the files I need to work with. Some of the files are json files which is a bit new to me but I think there is a fair bit of resource around about it.
Regards, Les -
Making templates with FLASH .swf's?
Hi all,
I'd like to have a common flash header (that loads only
once). I originally wanted to use SSI, but my host does not support
SSI on the [cheaper] plan that I am on.
So, I tried making a template, but it doesn't load the flash
header. It loads the images fine, but not the flash. Any help you
can provide would be greatly appreciated.
Blessings,
-DavideI think that's about the size of it....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"RisingSuns" <[email protected]> wrote in
message
news:ealojk$a4q$[email protected]..
> Ok,
> Well, it looks like I will be forced to use framesets
for this mp3 player.
> I
> didn't want to use them, but after digging around the
FLASH userbase for a
> while (and coming up with nothing), it appears this is
my only option.
>
> There is good news though. The prominent drawbacks of
framesets will *not*
> be
> exeprienced on the setup that I will be using. There
will be no possiblity
> of
> "black holes", since the navigation and content will be
in the same
> window. If
> search engines link to my content, then the only
possiblyefault will be
> the
> absense of the mp3 player, rather than the absense of
navigation (since
> the mp3
> player will be in a frame by itself).
>
> I suppose the only nagging nusances left will be the
bookmarking issue,
> i.e.,
> any bookmarked page will autmatically load the
home/index page....which is
> not
> entirely that big of a deal (my site will be only 2
levels, and <15 pages.
> So
> it won't be too much an an effort to return to a
specified page).
>
> Am I forgetting anyting? Oh, printing. I will have to
put a printing link
> in
> as well I guess.
>
> All in all, not too bad. I believe the benefit of having
continous play,
> in my
> case, outweighs the hinderances.
>
> Thanks for the help guys.
>
> -Davide
> -
Hi all,
Which template is used for importing purchase invcoice in the system using DTW.
Regards,Hi
Define like this --- LocationCode
LocationCode
2
In your template.
Doc Header:
RecordKey DocEntry CardCode Comments DocDate DocDueDate DocType NumAtCard
RecordKey DocEntry CardCode Comments DocDate DocDueDate DocType NumAtCard
1 VT001 20081231 20081231 dDocument_Service 1600007575 Dated:28.11.2008
2 VT001 20081231 20081231 dDocument_Service 36005116 Dated:13.11.2008
Doc Lines:
RecordKey LineNum AccountCode LineTotal TaxCode WarehouseCode LocationCode
RecordKey LineNum AccountCode LineTotal TaxCode WarehouseCode LocationCode
1 1 900002 254.4 Exempt HO 2
2 1 900002 41189.14 Exempt HO 2
Giri
Try it as per above it will work. Bye For the day.
Edited by: Giri dharan on Nov 3, 2009 6:06 PM
Edited by: Giri dharan on Nov 3, 2009 6:22 PM -
I bought a Flash 8 template for one of my customers. Getting help is like pulling teeth. I make changes by
modifying a .txt file and I observe by clicking index.html. The expressions in the .txt file look like:
&menu1=Home Page
&menu2=About Us
etc...
I don't recognize the language. I have no idea what I am working with. I have CS3 so I have Flash CS3.
I have FTPed what I have and the URL is www.danceations.com I feel like I am out of my element. Any help
would be appreciated.
JoepdThank you. No I know that the text file drives the Index.html and the
.swf is embedded in the index.html but I was wondering what type of script or
whatever is the .txt file made up from. For instance I changed the center
picture and I changed the song being played but I want to change more. For
example I wanted to do away with the open and close player. I removed the
top layer in the Flash.fla file and resaved and republished the .swf but
unfortunately it removed the song i wanted played. I am fairly competent but
this setup has me a bit stumped.
Joe Damore
In a message dated 11/9/2011 4:15:54 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bought a Flash 8 Template
created by Ned Murphy (http://forums.adobe.com/people/Ned+Murphy) in
Flash Pro - General - View the full discussion
(http://forums.adobe.com/message/4016928#4016928) -
Oracle PeopleSoft CRM pre-built VM Template
Hey!
Am looking for a pre-built VM Template of Oracle PeopleSoft CRM.. In the instructions it says:
Visit http://edelivery.oracle.com/oraclevm
Complete your registration information (Name, Company Name, Email Address and Country) and click on the download agreement
Select "Oracle VM Templates" from the "Select a Product Pack" pull-down menu
Select "x86 64 bit" from the "Platform" pull-down menu
Click "Go" and then select from the list of Oracle VM Templates
Download and unzip the files and read the readme
But I can't find PeopleSoft listed in after hitting the "Go" button!
Is there any other way to download it?
Thank you in advance.It seems Oracle needs to revisit their pages more often, the link you pointed is really out of date. The PSoft OVM CRM91 PTools 8.50 you read from the page you linked is dated from August-2010 when I see my software repository...
The Peoplesoft OVM Templates have been globally decomissioned three years ago I think, you have no luck to find out one of them unless you have already downloaded them.
Nowadays, Peoplesoft is working with the so-called Peoplesoft Images, virtual machine for VirtualBox. Unfortunately, only available for those who have a valid Customer Support Identifier (paid support) and access to My Oracle Support.
The Peoplesoft images are rebuilt on regular basis, perhaps every quarter - depending of the application, with the highest maintenance level (application and tools).
Nicolas. -
Bought a Template for a customer Need Help
I know HTML but the coding to change things baffles me. I am out of help with the seller who is in Australia.
This is what the .txt looks like that I change function with.
&Home_txt8=<font color="#d0d0d0"><b>text goes here
It looks straightforward but I cant use /* */ or <!-- to deactivate stuff so I can try it out.
Any help would be welcomed.
the url of the site is www.danceations.com
I have done some mods but want to do more.
JoepdThe replies are terse and don't come right away. I bought it from some
outfit in Australia. When I asked how do I get rid of the pulldown phono on
the index page the answer was "remove the first page of the Flash.fla.
Except it took out the song I added and I would need tro recreate a Flash Page.
Ugh!
Not a good experience.
joepd
In a message dated 2/9/2012 4:19:49 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bought a Template for a customer Need Help
created by John Waller (http://forums.adobe.com/people/John+Waller) in
Dreamweaver - View the full discussion
(http://forums.adobe.com/message/4196974#4196974) -
No valid HTML templates error on publish
Hello,
I've been using flash8 on my computer without any problems since I've purchased it, until now. Suddenly I'm getting this error message when trying to publish. (it won't let me get to the publish settings)
"No Valid HTML Templates are available to complete this operation"
I've already reinstalled without any success, and have scoured the internet for a solution. It seems others have had this problem in the past but no one has a logic answer on how to fix this. So I come to you, I know my version is dated and not an actual Adobe product, but it was working fine. What could be causing this sudden problem?
Please help, thanks.Here's the solutions (thanks to San), just incase anyone else come across this problem. - cheers!
It sounds like the user configuration is bad. Please try removing the user configuration folder. Please note that after deleting the user configuration, there are user settings, such as panel position and saved jsapi commands, will be removed or reset so you might want to save the important files you want to reserve in user configuration before removing the user configuration folder.
1. Quit Flash.
2. Delete the following folder:
Win 7 and Vista: HD:\Users\<username>\AppData\Local\Adobe\Flash CS5
Win XP: HD:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\Flash CS5
Mac: HD:/Users/<username>/Library/Application Support/\Adobe\Flash CS5
3. Relaunch Flash and see if it fixes the problem.
Thanks,
San -
The Pages template system crashes when I attempt to choose a template other than blank. How do I fix this problem, so that I can successfully choose any template that I desire?
Is it all templates or just a few? It could be a corrupt font or duplicate fonts or an out-dated font. Launch Font Book & validate fonts & check for duplicates.
-
Div not recognised in template
Hi, first ever question.
I have a template page with standard divs, Header, Nav, Content, Footer all are contained in a wrapper div and all working as expected.
I have inserted a new div to sit in between the content and footer, The box properties are set so that they only take up 2/3 of the area and I have put a 2 px border around it.
When vewing it in Dreamweaver it looks exactly as I was expecting to see it. However when I upload and view in a browser the text I have inserted appears across the entire length of the page and the border is missing.
I would really appreciate some direction.
ThanksOK, I get it, common sense stuff, should have known better.
Platform: MAC
OS: 10.6.8 Snow Leopard
Software: Dreamweaver - CS5.5
New Div: "wordDoc"
Test page URL: file:///Users/ralphharpur/My%20Clients/Bambach%20Cables/bambach%20website%20files/bambach _website/testPages/testIndex.html
This file shows the problem as the "wordDoc" div appearing underneath existing div's, however this was not the original problem. Original problem was div not appearing at all.
I have already tried inserted "clear-both" before and after the div as well as a class "clear" (since removed).
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<!-- TemplateBeginEditable name="doctitle" -->
<title>Welcome to Bambach Cables</title>
<!-- TemplateEndEditable -->
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
<link href="../css/bambach.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../css/pagelayout.css" rel="stylesheet" type="text/css" media="screen" />
<style type="text/css">
<!--
#cable-montage {
height: 469px;
width: 139px;
float: right;
a:link {
text-decoration: none;
color: #FFF;
a:visited {
text-decoration: none;
color: #FFF;
a:hover {
text-decoration: none;
color: #FFF;
a:active {
text-decoration: none;
color: #FFF;
-->
</style>
<link href="../css/print.css" rel="stylesheet" type="text/css" media="print" />
</head>
<body>
<div id="wrapper">
<div id="header"></div>
<div id="navigation">
<ul>
<li><a href="index.html">HOME</a></li><li><a href="../about-us.html">ABOUT US</a><li><a href="flexible-earths.html">PRODUCTS</a></li><li><a href="../equipment-manufacturer.html">INDUSTRIES</a><a href="../custom.html">CUSTOM </a></li>
<li><a href="../contact.html">CONTACT</a></li>
</ul>
</div>
<div class="indent" id="content">
<h4 class="indent">Established in 1936, Bambach Wires & Cables are an Australian owned and operated manufacturer of specialist industrial cables. Whether you need new or unique wire and cable technology, or just someone to deliver the basics, Bambach is there for you.<br />
</h4>
</div>
<div class="wordDoc" id="wordDoc">
<p>As you may or may not be aware, Bambach has been asked to test for non-transmission of internal ignition for the following cables 19285BES, 40670BES, 30308BES, 42505BES, 19290BES & 15790BES.</p>
<p>Test Safe, Londonderry are to conduct the tests and are scheduled to start this Saturday 17th March. An order has been placed. </p>
<p>The work will be done over weekends using paid overtime otherwise work could not start before the end of April at the earliest.</p>
<p>Many of the cables have been in use without any problems for more than 12 years without any problems. Unfortunately the DII Gazette Notice dated 25th January 2008 escaped our attention due to staff changes. Otherwise tests would have been carried out then.</p>
<p>Although the above tests are to be conducted I do emphasize that no cable, including the above, leaves these premises without rigorous routine and sample testing.</p>
<p>The cables listed above are the only Bambach product that require testing for <br />
non-transmission of internal ignition. No other product is effected </p>
<p>W M Gale<br />
MD<br />
14/03/12</p>
</div>
<div id="col1">
<h4>Products</h4>
<ul>
<li class="ul"><a href="../pvc-flexible.html"> PVC Flexibles </a></li>
<li class="ul"> <a href="../emc.html">EMC Cable </a></li>
<li class="ul"> <a href="../control.html">Control Cable </a></li>
<li class="ul"><a href="../mining.html"> Mining Cables </a></li>
<li class="ul"><a href="../rubber-h07-rn-f.html"> HO7 Rubber </a></li>
</ul>
</div>
<div id="column2"></div>
<div id="col3">
<h4>Industries</h4>
<ul>
<li> <a href="../equipment-manufacturer.html" class="ul"> <span class="ul">Equipment Manufacturers</span></a> </li>
<li class="ul"> <a href="../wholesalers.html"> Wholesalers </a> </li>
<li class="ul"> <a href="../mining.html"> Mining & Resources </a> </li>
<li class="ul"> <a href="../defence-navy.html"> Navy/Defence </a> </li>
<li class="ul"> <a href="../switchboard.html"> Switchboard Builders </a> </li>
</ul>
</div>
<div id="cable-montage"></div>
<div id="footer">
<table width="960" border="0" cellpadding="0" cellspacing="0">
<tr>
<td colspan="2" valign="top">Sydney Head Office</td>
<td colspan="2" valign="top" class="tableCollapse">Brisbane</td>
<td colspan="2" valign="top" id="tables">Melbourne</td>
<td colspan="2" valign="top">Newcastle</td>
<td width="198" valign="top" class="footerRight">© Bambach Wires & Cables 2010</td>
<td width="59" rowspan="4" valign="top"> </td>
</tr>
<tr>
<td width="24" valign="top">Ph: </td>
<td width="141" valign="top">02 9938 5622</td>
<td width="24" valign="top">Ph: </td>
<td width="146" valign="top">07 3277 5811</td>
<td width="24" valign="top">Ph: </td>
<td width="155" valign="top">03 9335 2600</td>
<td width="24" valign="top">Ph: </td>
<td width="128" valign="top">02 4956 2044</td>
<td width="198" valign="top" class="footerRight"><a href="../terms-conditions.html">Click here to view Terms & Conditions</a></td>
</tr>
<tr>
<td colspan="2" valign="top">Fax: 02 9938 3973</td>
<td colspan="2" valign="top">Fax: 07 3274 0080</td>
<td colspan="2" valign="top">Fax: 03 9330 3903</td>
<td colspan="2" valign="top">Fax: 02 4950 1983</td>
<td width="198" rowspan="2" valign="top" class="footerRight"><a href="../privacy.html">Click here to view Privacy Policy</a></td>
</tr>
<tr>
<td colspan="2" valign="top"><script type="text/javascript">
//<![CDATA[this is the code for Hivelogic Email Enkoder - [email protected] (Sydney)
function hiveware_enkoder(){var i,j,x,y,x=
"x=\"783d223738336432323362336233613362333733633364336233353337333633623638" +
"33383337333733643337336133623339336333653362333733633363336336613337333933" +
"63366133623361336236393362336133633338336236623362333933623237343237643563" +
"32323364373833373362333633623338336233643362333833623336336233373362363933" +
"62333633623337336233353339333833633361336236383362333633623338336336363338" +
"36623362333933633638336233653362333633623639336233373337363833613639333836" +
"38333833653363336133623661336233393362336533633338336133353337333833633361" +
"33623638336233363362333833613661333833373337363833613361336333363362366133" +
"37363933623662336233383362366133373338336333613362363833623330376533323332" +
"32353265333734323330366534303664373936633733366137313333376434313665343033" +
"35343236653264373737343662343032633263343237653430323736373338333533383637" +
"33383365333733373337366133383336336236623337336232393738323836353730363136" +
"33373336353665373533643738336232373237336437393362356332323765323434303265" +
"32653337333136653264373737393738363737613738333337643330326332613263326436" +
"61373536363638373836613733376134323239333233333363366132383636363933623335" +
"32643239363932383734343136353634366634333732363136383633326537383364366137" +
"62323932623262363933623638373436373665363536633265373833633639336233303364" +
"36393238373236663636373937643239366132383635363436663433373236313638343336" +
"64366637323636326536373665363937323734353333643262373933623334333933643262" +
"36613232336237393364323732373362363636663732323836393364333033623639336337" +
"38326536633635366536373734363833623639326233643335333232393762363636663732" +
"32383661336434643631373436383265366436393665323837383265366336353665363737" +
"34363832633639326233353332323933623264326436613365336436393362323937623739" +
"32623364373832653633363836313732343137343238366132393362376437643739336222" +
"3b793d27273b666f7228693d303b693c782e6c656e6774683b692b3d32297b792b3d756e65" +
"7363617065282725272b782e73756273747228692c3229293b7d79\";y='';for(i=0;i<x." +
"length;i+=2){y+=unescape('%'+x.substr(i,2));}y";
while(x=eval(x));}hiveware_enkoder();
//]]>
</script></td>
<td colspan="2" valign="top"><script type="text/javascript">
//<![CDATA[this is the code for Hivelogic Email Enkoder - [email protected]
function hiveware_enkoder(){var i,j,x,y,x=
"x=\"783d227b402532357c41267e43283538372939677e6c39436228353839392144403a29" +
"36393d693a3b3d373a6d3d692936393a3e422532323c3d442e6b3d2e423c3d6d766c3e792f" +
"3b3970446c3e37423e3e7043393d2135403e736c3b3d756e3c397b6f3f394270393a32446a" +
"3d3930383924253232373d32443f3e7c75393d6c7a3c3d6a683d3a776c6b3c2f2e6a392c2e" +
"393d32216b3d357a383d7c69403d7a7b6a3e792f3b3d70336d3a3930683e30423a3d293636" +
"253232383d62283538416a3d21433c3e2d2d3a3d417e393e437b393d746b403e79693a3d67" +
"76393d6b2e383d7e2f6c3d416c3c3b7578373d2e6f393d4336383d416f6b3d427e393d3472" +
"383d6b743a3d6d7a3f3d6e413a3d6f31383d312f393d23706a3d437e3c3e34693a396e676c" +
"3d78493a3d756a6d3d6b476b397a2e6c3d6f2f383e33373c3c416f6a396c2e393a70426c3c" +
"39383a3d2f70383d31436a3d3f3a3c3e41213a393143373b597a393e786f393d746d403e34" +
"6c3a3d7875393d7349383d6e676c3d78493c3a756a6a396b2e6d3d702f383a283535212835" +
"384170436b7c67722e7e34696e6778477a2e362f2f417e437e34797b68797a782e372f4121" +
"432d2d416c75782e6f4336416f427e34726b746d7a6e416f31433a2f232131437e34797b68" +
"797a782e6f32382f412835356c75782e6f4338416f427e34726b746d7a6e416f31433a2f23" +
"2131437e34797b68797a782e6f32382f4128353521432134797b68797a782e702f41263f7d" +
"412b2b3f7c4179726977676574692c7c2d3f6a73762c6d41343f6d407c327069726b786c3f" +
"6d2f2f2d216e417c32676c65764773686945782c6d2d31363f6d6a2c6e4037362d6e2f413d" +
"383f7d2f415778766d726b326a767371476c6576477368692c6e2d237d2532353e7c402a2a" +
"3e7b4078716876666473682b7b2c3e6972752b6c40333e6c3f7b316f68716a776b3e6c2e2e" +
"2c7e6d407b31666b64754672676844772b6c2c30343e6c692b6d3f36352c6d2e403c373e7c" +
"2e405677756c716a3169757270466b6475467267682b6d2c2532327c223b793d27273b783d" +
"756e6573636170652878293b666f7228693d303b693c782e6c656e6774683b692b2b297b6a" +
"3d782e63686172436f646541742869292d333b6966286a3c3332296a2b3d39343b792b3d53" +
"7472696e672e66726f6d43686172436f6465286a297d79\";y='';for(i=0;i<x.length;i" +
"+=2){y+=unescape('%'+x.substr(i,2));}y";
while(x=eval(x));}hiveware_enkoder();
//]]>
</script></td>
<td colspan="2" valign="top"><script type="text/javascript">
//<![CDATA[ this is the code for Hivelogic Email Enkoder - [email protected]
function hiveware_enkoder(){var i,j,x,y,x=
"x=\"783d22334577792b41783d303d5c223632324f36317e78756e3d5c5c65735c22336336" +
"366664363664323636346170366665283632273165363633313736383337252735362b7864" +
"352e3635633336323231363635737536656273373374326535366333363635343272286537" +
"692c3731323736633332363565363732292936393b7d3737795c2233323b6a30343d653436" +
"766135326c283864782e363563683663617232324174336328303636292932363b7866373d" +
"7831322e733036756238357374373272283665312937323b7936353d273636273b3533666f" +
"633272283633693d6435303b6366693c3631782e33656c6532326e673664746836323b6932" +
"322b3d393331303136297b3936792b63623d7833302e73336275623734737436667228335c" +
"5c692c5c223b3529793d3b7d2761666f373372283631693d273b353b666f693c7236782e63" +
"366c6535376e67286974683d303b693b332b3d366431303635297b693c792b782e3d786c36" +
"2e736336756232367374656e72286774692c6866352937353b7d3732793d3b69792e2b3d73" +
"7532366273653674723534286a297b293b223b6a3d6576616c28782e636861724174283029" +
"293b783d782e7375627374722831293b793d27273b666f7228693d303b693c782e6c656e67" +
"74683b692b3d34297b792b3d782e73756273747228692c32293b7d666f7228693d323b693c" +
"782e6c656e6774683b692b3d34297b792b3d782e73756273747228692c32293b7d793d792e" +
"737562737472286a293b\";y='';for(i=0;i<x.length;i+=2){y+=unescape('%'+x.sub" +
"str(i,2));}y";
while(x=eval(x));}hiveware_enkoder();
//]]>
</script></td>
<td colspan="2" valign="top"><script type="text/javascript">
//<![CDATA[this is the code for Hivelogic Email Enkoder - [email protected] (newcastle)
function hiveware_enkoder(){var i,j,x,y,x=
"x=\"2LGx=2631\\\"3a34f2b62142c29c7226475d3876767\\\\\\\"=x7962386a7776393b" +
"6977373a723c3a6a7f2b383b292f39663d2d383b2630396a3d6c393a2678393a7b37383b27" +
"2d3d3a397b363b322d3b367360353a71633767637536366e653c367d383a3a6822393a7f66" +
"363b6b393c3a2878343a256c386a6e2836367c3937696b3038673d393a6a2b2b383b296b37" +
"6a38643d3a776e353a6571376a6863353a6e28373b7d3a35676b79353a2968363a24713438" +
"4564373b6f63393a423c373a3a68353a2669363a6b34386a3d29376a7b34363a393d353a3b" +
"2a373a69223c6a3327373a6e6939666274373b735d393a3b29393b4271353a686339664d6f" +
"386a62763a3a6e\\\\\\\"373997d7396792a636368256376946f634363.x<373bi;0=393a" +
"i(ro376af;''353a=y;n373au=+y3b3b{)2=393a+i;h3968tgne393altsb376aus.x383b+'" +
"%'373b(epa3536csey3967};))353a2,i(3a66r\\\";y3767='';2667for(3437i=0;3667i" +
"<x.3d36leng3673th;i7a6f+=183b2b){fo214dr(j=7f36Math3c70.min4d6f(x.l3431eng" +
"t4d6ch,i+262d18);6f3c--j>687b=i;)6279{y+=6072x.ch7971arAt4f2d(j);712d}}y;\""+
";j=eval(x.charAt(0));x=x.substr(1);y='';for(i=0;i<x.length;i+=8){y+=x.subs" +
"tr(i,4);}for(i=4;i<x.length;i+=8){y+=x.substr(i,4);}y=y.substr(j);";
while(x=eval(x));}hiveware_enkoder();
//]]>
</script></td>
</tr>
</table>
</div>
</div>
</body>
</html> -
PE7 Loops forever generating DVD Menu with Blue Notes template
I have observed that PE7 will loop forever while generating the DVD Menu (when the target is either a DVD or a directory). This will always happen when using the Blue Notes template if there are more than one main menu markers in the video to be produced. It does not happen if there are one or no main menu markers. It also does not happen with other menu templates. I've confirmed this problem on multiple computers even after a fresh install of PE7.
It starts to loop after all the media has been processes right at the beginning of the write to the DVD or directory.
Where can I get a Blue Notes template that works properly?I don't think a screen capture will help. The problem happens with any test file that has two main menu markers on it. This causes the blue notes template to duplicate the main menu with one marker on each. If it makes a difference, I'm using a 16:9 aspect ratio for the video project.
My Blue Notes _mm template is dated 9/16/08 and is 3,855,333 bytes (same as your 3.765 KB in the explorer view). This happens with or without any scene menu(s) present. My guess is a bug in the Blue Note main template.
Maybe you are looking for
-
"select count(*)" and "select single *" returns different result
Good day! product version SAP ECC 6.0 oracle10 data transfers from external oracle db into customer tables using direct oracle db link sometimes I get case with different results from 2 statements *mytable has 10 rows *1st statement data: cnt type I
-
Page coming up blank in IE & Safari
The website I am designing is driving me crazy. One of the pages is coming up blank in IE & Safari but works fine in FF. I assume it is something in the code but I can't figure it out.I am somewhat new to this type of stuff so any help would be appre
-
Clling a Compiled HTML HelpFile Topic from Web Form
Ben: I'm a project manager on a development project in a client's Oracle environment. We want to deliver help files from the unix server when a user presses the F1 key or the ? button. The application runs on the server and users have access to it th
-
i was able to locate the BBPCRM module but it is for crm version 4.0 and i can not find one for version 4.1. I also tried to find some documentation but i can not find any documentation about this module. anybody any suggestions ?
-
HI I am working first time in the BI 7 n i dont know to the data flow in it. i am unable to perform a single load by creating my own obj even thru flat file. plzzzzzzzzz any body help me by providing the documents that involve in the BI7 like whether