Auto Activation of Content for CTS+ for HANA

Hi Everyone,
I have configured CTS+ for HANA and I am able to transport HANA Content(Delivery Unit) From Dev to Quality box.
But my content like Views are not getting activated automatically.
The transport request in SOLMAN system is green and it says that
"AutoActivation of Content is disabled by default. To auto activate the content create delivery unit and add __AutoActivate to it.
For example, lets say I have a Delivery Unit Test.tgz so to auto activate the content of this delivery unit, I need to create a Delivery Unit with name
Test__AutoActivate.tgz"
I have tried doing this but still the content is not getting activated automatically.
Is there another way to change the default setting of Auto Activation or do I need to add any parameter in HANA for this?
Regards,
Vivek

Hi Vivek,
What are the values for the below flags:
com.sap.aii.ibdir.core.transport.autoActivation.default
com.sap.aii.ibdir.core.transport.autoActivation.showFlag
Regards,
Krishna Tangudu

Similar Messages

Workflow Approval for CTS+ for NON ABAP Transport

Hi
We have a NW Portal system currently using CTS+ for transport.
We would like to incorporate a workflow approval for transport across the different landscape (DEV -> TEST -> QA -> PRD) with CTS+. The workflow approval would work in such a way that when someone approves a transport request from DEV->TEST, the Basis Admin will then perform the import to TEST. So this approval will also be needed from TEST -> QA and QA -> PRD.
Does Solution Manager provide such workflow approval for NON ABAP transport?
I do hope anyone has such experience to share.
Thanks.
Regards
mike

Hi Mike
Yes solution Manager CHARMS or Change request managment functionality uses CTS+ to move the Non ABAP requests
it uses IBASE as identifier for systems and for more can search sdn
check this link too
http://www.sdn.sap.com/irj/sdn/alm-change-management
Hope it helps
Regards
Prakhar

Pro's and Con's for Auto activation of ID Objects

Hi
Can anyone provide me the Pro's and Con's of having Auto activation enabled for ID Objects.
Regards
Osman Abdul Aziz Jabri

Hi Osman,
The Pros of Auto activation is all objects which do not need any manual configuration will activated. But the problem is in one transport (and in one tpz) you might have some object which needs manual configuration before activation and in this case the auto activation is failed.
So i would suggest not to use auto activation feature for ID. Please refer the below SAP Note
1805662 - PI Communication Channel CTS+ transport error: Enter a value for attribute
regards,
Harish

Font Book Auto-Activation for Adobe CS3?

Font Book's Auto-Activation does not work for me in my Creative Suite 3 applications. I have read articles where people didn't have a problem with it, (i.e. http://www.macworld.com/weblogs/creative/2007/10/leopard-creative-suite-3/index. php?lsrc=mwrss ) so I assume it works somehow. All of my programs are updated.
Any ideas?

In that article, the author says that fonts "activate quickly" in CS3 when he uses Font Book; I think he's referring to the fact that when he activates a font in Font Book, CS3 menus are updated almost instantly. This has nothing to do with auto-activation - which isn't working with InDesign CS3 at all.
On the other hand, I find it works in almost all my other programs - Word, TextEdit, whatever... (hmm, I think not Stickies - as if it matters - but I don't recall)

CTS+ for SAP Hana

I am going to set up CTS+ for SAP Hana non-ABAP development.
However, the same SAP Hana landscape also has ABAP development.
I think on tcode STMS I cannot have two transport routes with exactly the same DEV, QA and PROD,
i.e. we cannot have two transport routes as follows on STMS:
So how to set up separated transport routes for ABAP and non-ABAP development for the same SAP Hana
landscape?
Thanks!

Hi Christina,
For transporting non-abap objects using cts+, you can refer Transporting Non-ABAP Objects in Change and Transport System - Software Logistics - SAP Library
Not sure of any difference on hana platform.
Regards,
Divyanshu

Activity type E not allowed for equipment entered

Dear Sir , We are using ETM . Following error is coming while creating performace based document .
Activity type E not allowed for equipment entered
Regards
Anil

Give 1 for both type and give it a try.
for target=actual which is type 5 pls check the link below
http://help.sap.com/saphelp_46c/helpdata/EN/66/bc6faa43c211d182b30000e829fbfe/content.htm

Activation of Data sources RSA5 for PP

Hi BW Gurus,
I am Activating the Business content Data sources in RSA5 while activation i am getting errors for Master data 0Prodorder_attr and Text
0workcenter_attr and text and hierarchy the data sources are not activating.
It displays the error msg "Request/task QLTK901816 can only be changed in client 320" currently i am working on 330 client for R3.
Please provide the solution for this.
Regards,
Syed

Hi Shahid,
I think the transport request under which you are trying to capture the activated DS is in client 320. Create a new request in your current client (330) and provide this development class and transport request while activating. That should solve your problem. Hope it helps.
Thanks and Regards
Subray Hegde

Bi content objects collection for transport

Hi Experts,
may i know how can i colloect the technical contnet objects for transport?
basically i already transport a technical content content request to quality, after transporting i got the logs as some of the technical content objects have not been activated in quality, but i thougt i can directly activate the content objects by using the program RSDG_IOBJ_ACTIVATE and remaing programs for cubes,aggregates,data sources and all in quality sytem, but client dont want the mannuall activation in qulaity system, they are askig again i have to transport the active(which are the objects not in active version in quality) version from EST to ESQ and then re-import my main transport.
so now again i have to activate the objects in develpment, may i know if i activate the program RSDG_IOBJ_ACTIVATE in se38 and transport the request to quality is it ok (here have to create a new request for this?) here in asingle request can i activate all objects which are not activated (i have to go for activation to info objects, cubes, data sources, update rules,transfer structures) is there any sequence steps to collect this object, please provide me
Many Many thanks
Mrudula

Hi,
Activate all the necessary objects and collect them in a single request and check for any inconsistencies or inactive objects in the requests before transporting it to the QA or PRD in SE03.
Regards,
rik

Anybody has a working customer case on using SLT for Oracle to HANA migration?

Hi Team,
We had a request for Oracle to HANA realtime.
And we know that SLT supports the same.
Would like to know if there was any customer case or Valuable points to be taken care for the same?
PS: Writing this thread to get a quick help if anybody has done the same already. Meanwhile we are trying to setup the same and check.
Regards,
Krishna Tangudu

Hello Tobias Koebler
Request your help with this. Can you help me in understanding if there are any active customers or case studies where they have replicated the data from Oracle to SAP HANA?
I got only this link:
http://events.asug.com/2013AC/Business%20Integration%20Technology%20&%20%20Infrastructure/0603%20Implementing%20SAP%20HA…
Awaiting your response
Regards,
Krishna Tangudu

Issue with multisite for CTS-P55C60-K9

Hi, I faced one issue when I was tried to add Multisite licence for CTS-P55C60-K9. Now CTS-P55C60-K9 has End of Sale. How can I order Multisite licence for codec in my case? According to a datasheet I need LIC-P55C60-MS.

forward the .LIC file and your contract information to [email protected] and have them verify what should be included/excluded. Its probably and auto-generate key from the PAK that is missing something that should have been there. Licensing should be able to fix this.

Apple TV not working - content requires HDCP for playback

Hello, I am at home sick and thought I'd watch a movie through my Apple TV, which I haven't used for about a month. Rented one, but when I went to play it got the error message "This content requires HDCP for playback." I have changed nothing since using it last. None of my previously downloaded shows will work either. Have spent the last hour and a half plugging, unplugging, updating software on my TV (while feeling like absolute rubbish) to try and fix it. I do not have a spare HDMI cable but can't believe this is the problem when it has previously been working FINE. I checked about doing an Apple TV software update but it was already on auto update and is up to date. I suspect this might be the problem - it's done some stupid update and wrecked everything. Apple support can't take my call till tomorrow afternoon and I am way too frustrated to be able to wait till then. I'm too sick to go to the shops to buy a cable and don't think I should have to anyway. Can anyone please help me? This is RIDICULOUS! I just want to watch a movie

Thankyou Rudegar... I'll try a new cable but I really don't understand how any of it could've suddenly broken... it hasn't been touched. Very annoying

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
Is there a way to tell Safari what encoding to use if the web page fails to do that?

System and landscape estiamte for SCM on Hana for Practice use

Hi All ,
We want to know the System and landscape estiamte for SCM on Hana for Practice use.
Regards,
Abhishek

Hi,
Perhaps this link could help
http://wiki.sdn.sap.com/wiki/display/SMSETUP/MaintenanceofProductintheSystemLandscape
Also check out the note :
For SCM Add-On Products like SAP SNC, SAP EM, SAP F&R the basis component (SAP Netweaver Release) has to be also assigned as relevant Product Instance
Might be helpful, if you check the product versions being reported for the system in the SLD.
Regards,
Srikishan

How to configure CTS+ for Solution Manager for XI 3.0

Hi ,
We are working on XI 3.0 SP 20 and Doing a file system based transport of .TPZ files. We observed that there is a possibilit of misssing the objects while tranporting. So we are planning to set CTS+ with our Solution Manager.
Question:
1. Can we configure CTS+ through the latest version of Solution Manager for XI 3.0 landscape?
If Yes .. How? If No... Why?
2. Is there any way to make the the transport automated like ABAP tranports.
If there is.... Please send the link or documents..
Thanks
Manoj

Hi Venkat,
Thank you for the Demo. The Demo gives me information about the CTS+ setup. I am looking for the compatability of CTS+ for XI 3.0.
We have Solution Manager 7.1 setup in place.
Please let us know if we can setup CTS+ on solution Manager (7.01 EHP1) and use it to transport XI 3.0 SP20 IR/ID objects across the XI landscape.
Regards,
Manoj

I cannot play rented movies from i tunes and netflix theres always a plug on my tv screen "This content requires HDCP for playback." HDCP isn't support by your HDMI connection.

I rented twice already in my ITUNE movies but can't watch thru Apple TV just of this issue" This content requires HDCP for playback.
Pls response to this issue.

unplug tele power lead for 10 seconds, then try again. Worked for me.

Auto Activation of Content for CTS+ for HANA

Similar Messages

Maybe you are looking for