Auto Adjust Resolution?

I've completed my web site, everything looks as I want it. Is there a method to getting flash to auto adjust to the end users screen resolution? ie: when the site displays on a 800x600 monitor scroll bars appear. I'd like for the site to appear on the page as whole without the scroll bars as it does on my 19 in monitor which is set to 1024x768 resolution.
Thanks!

Similar Messages

HP 23xi Monitor gets fuzzy despite driver and auto adjustment

I have a HP pavilion dv2000 windows Vista with a HP 23xi monitor hookep up throug VGA. I installed the driver from HP's website and the text was no longer blured nor the images stretched. However, every single time I unplug my laptop and replug it back to the monitor the text gets blurry again... No matter what I do, auto adjustment, resolution, etc..
Can you help me fix this?
Thank you.

Please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers that are all different. The above requested information can be found on the bottom of your computer or inside the battery compartment.
The information you have provided, "HP pavilion dv2000", is incomplete and only identifies a series of computer models.
Please unplug the power from the monitor and then hold the power button in for 30 seconds. This should reset the monitor. See if that resolved your issues.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Auto Adjust Brightness late 2010 is gone

Auto adjust Brightness Button is gone?!?
Can you help me getting it back?
See

The auto brightness button is near the top - the one that starts with "Optimal".
In English, that button says "Resolution - best for built-in display".
I see what you mean, though, as resolution and brightness are really different things.
Anyway, glad your problem is solved.

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

How to auto adjust the height of my div tag?

This is my website www.whistleandlisten.com
The white background is a div tag and whenever I add new content within the div tag I want it to auto adjust to extend the white div tag down as the page gets longer. I have tried css and set my height to auto but that makes it disappear. Right now I have to set it to a certain amount of pixels which gets annoying and sometimes I forget to after adding lots of content. PLEASE HELP.

To have an extensible height element, you should not apply the height property as you have done starting at line 9 of songcss.css
#whitediv
position: absolute;
left: 50%;
margin-left: -490px;
top: 0px;
width: 950px;
height: 2900px;
z-index: 1;
background-color: #ffffff;
background-image: none;
background-repeat: repeat;
background-attachment: scroll;
background-position: 0% 0%;
background-clip: border-box;
background-origin: padding-box;
background-size: auto auto;
color: #ffffff;
box-shadow: #ffffff;
overflow-x: visible;
overflow-y: visible;

Auto-adjust on Compaq WF1907 LCD Monitor

Auto-adjust on Compaq WF1907 LCD Monitor
I have a vision problem and need to adjust the brightness on my Compaq WF1907 LCD Monitor to 30%. However, every time I turn the monitor 'ON' it performs an auto-adjustment which resets the brightness to 100%.
How can I lock in the 30% or turn the auto-adjust off ?

Hello,
You can try locking the settings: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00850175&tmp_task=useCategory&cc=us&dlc=en&lc=e...
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

Auto Adjustment in Progress Flashing HP w1907

I have a HP w1907 monitor and i hooked it up to my macbook and it works great just it keeps poping up Auto Adjustment in Progress then goes back to what i was doing.
I have to white plastic, removiable battery macbook OS X 10.7.5 Lion.
if that is needed.
Plz and thank you for help!!!
~Gamer

Hello Diqoter,
You keep getting a message that auto adjustment in progress.
Have you tried to connect the monitor to another computer?
It might be that the auto adjustment button is stuck.
If you still have the disk that came with the monitor you can try to run the disk.
Here is a link to the manual for your monitor.
Do a hard reset of the monitor.
Unplug the power going to the monitor and hold down the power button for 15 sec, this will reset the hardware in the monitor.
Let me know how everything goes.
Have a good day.

While editing photos in Aperture, I'm trying to make an "auto" adjustment to the exposure but the button is grayed out and consequently doesn't perform any function, please help! Thank you, Mike

While editing photos in Aperture, I trying to make an "auto" adjustment to the exposure,
but the "auto" button is grayed out and will not allow any auto function to take place.
Please help!
Thank you,
Mike

Mike, are you working with raw images?
For some raw images auto exposure is not available, have a look at this manual page:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=9%26tasks=true
Note: Automatic exposure adjustment is available for Aperture-supported RAW images only. If you want to adjust the exposure of another file type, such as JPEG or TIFF, see Working with the Exposure Controls. For a list of supported RAW file types, go to the Apple website at http://www.apple.com/aperture/specs.

New iMac brightness level keeps changing (auto adjust NOT checked)

Just got a new 27 inch iMac and keep on having to change the brightness level back to the brightness I prefer.
I do not have auto adjust checked, I put the brightness slider up to the level I like and after a while the brightness dims to what seems like the default level as its always down to the same spot on the slider...what gives? i just want it to stay where I want it...
Help.

I have same problem, of autobrightness being unchecked and my brightness going from full to about 3/4 bright
all by itself. I had that problem, then flickering of my screen also was taking place. I didn't bring my unit into Apple
because this autobrightness thing plus flickering would not happen on command,, and I wouldn't be able to show them properly. Well , finally my left side of the screen dimmed,, and that was the go ahead to bring it in to them
to show the left side of screen. I also told them about the flickering,, and the autobrightness, which I figured played a role into the final left side dimming. They replaced the backlight and the display LCD on warranty.
I have had it for about 5 days. The screen is equally lit (as should be), however, I discovered that my same old
problem of autobrightness, is slipping back to 3/4. So most of you have autobrightness problem in a sort of different way. I set mine to "torch" because my downstairs bedroom is dim (with one overhead light), but sometimes, just plain dark,, so I want to sometimes keep it at torch,, however, it still slips back. You would
almost think that if my surronding was dim or dark, that it would stay on torch if the autobrightness was really working properly. Go figure. I just tried SMC a short while ago,, I had tried, before my repair doing PRAM and the other one (I think VRAM). I also will unhook my second monitor to see if that is having an impact on things.
Do any of you in this post have a second monitor attached,, and have you tried unhooking it to see if the problem
is resolved?

Auto adjust brightness ... can it be reversed?

I cant remember if i had this problem with Snow Leopard. Not sure if this is a Lion issue or my new MBA either.
The auto adjust brightness seems to adjust the screen brightness to low in bright light and high in low light.
I would like it reversed as in the dark, i dont need a bright screen and in the day, i need the screen to be brighter.
Any body noticed this same adjustment on their Lion MBA?
If so, does any one know how to reverse it?
Thanks

SAP has a program to reverse depreciation but it is somewhat complex and not available on OSS. I'm also not sure if it is limited to (or can be ported if it is) to the older depreciation program RABUCH which would limit it to those customers that currently post using RAPOST2000.
But barring access to the program, it's not possible to reverse it. You would have to proceed as Jagdish describes... feed the GL data that is -1 of the data that was posted. I wouldn't do it, personally.
-nathan

Pictures in iDVD slide show keep auto adjusting

Hi,
I'm knew to iDVD. I am a professional photographer and prior to iDVD used another piece of software to create DVD slideshows.
I created my first iDVD slide show, and encountered a weird issue. The only transition I'm using is a dissolve; it seems that at the time the slide show was being rendered, images were somehow being "auto adjusted" for exposure. The images come on the TV, then they automatically adjust for exposure; iDVD attempts to make lighter images dark and darker images lighter. It is annoying. Anyone know how to turn this "auto exposure" adjustment off?
I looked everywhere for help on this issue: I.E. turn off "auto adjust", but to no avail.

Hi,
Thanks for the reply...
Question: How do I turn on or turn off "auto adjust?"
I didn't quit and then restart...
The images are on the higher res side.
but again, where is the "auto adjust" setting located?
Michael

Iweb auto adjust for different computer monitor settings

Nobody has the same display settings on their monitor, so how can I get iweb to auto adjust to different computer monitor settings?

Are you referring to screen size? If so many prefer to have their browser window set to the size they want unlike PCs in which the browsers usually always fill the screen blocking out the desktop.
Why not set your site width to a size that can be utilized by all, desktops, laptops and mobile devices. Apple recommends 980 pixel width for that.
There was a post about this some time ago with, if I recall correctly, some code to do that. I think Cyclosaurus posted it but am not sure.
I know its a personal preference but when I land on a site that forces my browser to fill the screen I leave and don't go back.
OT

Auto adjusts

Hi All,
Does Aperture apply auto adjusts to your images? or are they displayed "as is" directly from the camera?
Also can someone please explain the white balance tool in Aperture. I am used to nikon and adobe software where you choose a white balance (sunny, shade, flash etc...) and then you can fine tune if you want to, this seems to be missing in Aperture?
Cheers.

They are displayed "as is." No auto adjustments (a la ACR defaults) are applied.
The white balance tool is akin to the eyedroppers in the ACR white balance tool. Just click on a neutral area of the shot (white is fine, so long as none of the values are 255, or grey), and they values for R, G, and B will be equalized, effectively removing the color cast.
Aperture doesn't have any presets for sunny, shade, tungsten, etc., with white balance. However, these are just numbers for color temperature and tint. You can see the values ACR chooses for these and define your own presets, if you want.

How to stop Lightroom from auto-adjusting RAW files

Is there a way to stop Lightroom from automatically "fixing" my RAW files? When I first load them in they look perfect (like they do on the back of my camera), but then LR auto-adjusts them to make them dull and desaturated and not at all contrasty. Is there a way that I can set LR to not do anything to the files and let me decide what I want the original to look like?

I totally understand where II is coming from. I too find it bothersome that in some images, the pre-processed preview is a more pleasing image than the unprocessed RAW. At the same time, it is the unprocessed nature of the RAW image that is the whole attraction and point to shooting RAW. An obvious workaround (if one is willing of course) is to shoot RAW+JPEG so as to either have the JPEG as a "target" reference or final image when suitable. And that is an option I used to employ until I got tired of dealing with the issues of essentially doubling the number of images I was working with.
I do disagree with II's thought that the preview showing up is slowing down any processing of the RAW image. It would seem to me that the whole reason the preview is showing up is that it is a prerendered aspect of the file that pops up while the actual preview rendering is taking place. While I don't claim to have technical knowledge as to how this all works, I would think that LR is simply showing the initial rendering of what the RAW file is telling LR it looks like until LR can actually make it's OWN interpretation. Either way, the process is fast enough that it isn't a huge issue to me on my system. In fact, those images where I see a vast difference between the inital preview image and the LR rendered resolve no slower than the rest.
It is interesting to know that there are applications/utilities out there that will extract that inital preview though. I thionk it would be very cool if LR made use of such a capability more directly as an option.
Anyway, while the frequency of my use of LR so far pales in comparison to that of PS and Bridge, so far I can say that such discrepency between nice looking inital preview and less than so RAW is far less common than it is working with PS and Bridge CS2.

X2 time not auto-adjusting

Hi,
I have an X2 on the Orange network and since I have had it, it has never updated the time auomatically. As an example, I have just been to France for a week. When I went the phone was on GMT. It should have:
1 - Updated to French winter time on 18/03
2 - Updated to French summer time on 25/03
3 - Updated to BST when I returned yesterday
It is still on GMT
In Menu > Settings > Date and Time, Auto-update of time is set to "On". I updated the phone firmware a few weeks ago s it is possibly the most recent.
Have you any idea how to fix it?
Does it make any difference that the SIM card ay be more than 10 years old?
TIA,
Nick

I find the auto adjust fan is an hit and miss at times with my Macbook, especially if I'm rendering video in FCE and gets quite hot and not had a solution to it.
So I control it with smcFancontrol.
(smcfancontrol doesn't autostart on boot)
Have you clicked on check box in the preferences in options section, to "Autostart smcFancontrol after login"?

Auto Adjust Resolution?

Similar Messages

Maybe you are looking for