Auto alert mechanism for ATG scheduled job failure and BCC project failure

Hello all,
Could you please confirm if there are auto alert mechanisms for ATG scheduled job failure and BCC project failure?
Waiting for reply.
Thanks and regards,

Hi,
You need to write custom code to get alerts if an ATG Scheduler fails.
For BCC project deployment monitoring, please refer to the below link in the documentation.
Oracle ATG Web Commerce - Configure Deployment Event Listeners
Thanks,
Gopinath Ramasamy

Similar Messages

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

What's the Difference Between Logic Board Failure and Hard Drive Failure

Hi!
So I wanted to know the difference between a Logic Board Failure and Hard Drive Failure because a couple of days ago I tried starting my computer up and I was welcomed by the Apple chime and a grey screen. I have been researching and most people say its either the hard drive or the logic board. So I am curious to know what are the symptoms of both. Thanks a lot, in advance!

The hard drive is where the OS resides, if it dies there is no OS loading, so you can't boot. If you hook up your external drive with your clone of the internal drive, boot up and hold down the option key, select your clone drive as the startup drive in boot manager that then appears, and the computer boots normally, then the computer is OK, it is just the internal drive that has gone south. You don't have a clone to boot from? Now you know why you should.
You could try booting from the DVD that came with the computer, hold down the "D" key to run diagnostics and see what the results are. If you can't boot into the diagnostics then a trip to the Apple store is probably in order.
Francine
Francine
Schwieder

Change user for backup scheduled job

Hi all,
In our ecc 6.0 system is cluster controlled.i have scheduled regular br offline backup @ night for this month in db13.In a particular day for some reason i have removed the scheduler in db13 and also delete the associated released background job in sm37.On the next day after restarting the system i change the user for backup background job in sm37 for the current day but i need the changes for all rest of the day of this month.One option is that delete from db13 and recreate again with required usreid.
without recreate could anyone tell me how to change the user for background job for the other day also??
Regards
Pinaki

Hi
In order to change the user id in SM37 to run under different user you can highlight the background job which is scheduled to run, double click on that and click on STEP in task bar.
Click on USER and you would have a change pencil icon.
Click on Pencile Icon and It would take you to another pop up were you can have the user name entered.
In this way job would would show some other user name who is creator but would run under the person whom we have entered above.
Thanks and Regards
Arun R

Capture DDL for Oracle Scheduled Jobs and job from DBMA_JOBS

I have trying at this for while and now I am stuck...so I need some help or advice.
I am doing a DB migration and I need to capture the DDL for all Oracle Scheduled Jobs as well as DBMS_JOBS. Anyone have a good way?
I took a datapump export last week. Can I run a impdp and capture the DDL for this VIA the sqlfile parameter? If so, how? What would be the script for it. Something like this maybe (par file)?
directory=DP_IMPORT
DUMPFILE=dump1.dmp
SCHEMAS=A,B,C...X,Y,Z
LOGFILE=JOBS.LOG
EXCLUDE=TABLE,INDEX,CONSTRAINT
PARALLEL=4
INCLUDE=JOBS
????

Hello,
It's JOB, see following table for possible options , I recommend you to read throught this thoroughly before starting.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_metada.htm#BGBIEDIA
Regards

Bat file for running scheduled jobs

Hi
I am not entirely sure whether this is the correct forum to post this question, so apologies if I have posted this question in the wrong place.
Anyhow, I would like to know how to create two automated bat file scripts that will execute a PL/SQL package that will tell my Oracle 10g R2 database to run a scheduled job. Equally, I need another bat file to tell it to drop the scheduled job.
I already have a PL/SQL package that creates a schedule job using dbms_scheduler, and I can execute the scheduled job by going into SQL Plus running the execute command against the package. It is this latter bit, the execute part that I want to automate into bat file.
Can someone show me how to do this?

I'm in complete agreement with Hans. Oracle has two facilities DBMS_JOB and DBMS_SCHEDULER neither of which benefits in any way be being called by a batch file.
What is your version number (all of it) and why are you considering this idea?

Change variant for background scheduled jobs

Hi experts,
I want to schedule the report RKO7KO8G in background.
Two of the selection parameters of this report are Settlement period & Settlement year.
This report should be executed in the background every month. For this the period parameter should change every month
, like for example when the report executes in background in May then period should be 05, June - period should be 06
and so on.
i.e. the variant should change.
For this how do i create a dynamic variant. I tried to create dynamic variant but it says that the parameter
should be a date field. However, the settlement period field over has input from 001 to 999 & not date field.
I want to schedule this report in background on a monthly basis and change its input parameter Settlement period
as per the month.
Please suggest.
Regards,
Priti.

Links to sap.technical are NOT permitted. Even via Tiny.
Hi,
Have a look at the below tutorial;
[Dynamic Variant|http://joyjitghosh.blogspot.com/2008_09_01_archive.html]
Regards,
Karthik D
Edited by: Matt on May 27, 2010 10:57 AM - changed url to the source

Mails/Alerts-triggered for messages stuck in queues and failed in moni

Hi,
I have two doubts.
1) Messages are getting stuck in smq2 of my ECC and PI system. I have to manually push them. Is there any mechanism in which we can get alerts/mails when messages get stuck in queues.
I have already gone through the blog /people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors and I have implemented it in ECC system. But no mails were generated.
2)Is there any method in which I can get alerts/mails when a message fails in sxmb_moni of ECC system?
Thanks and regards,
Siji

Hi Sanjeev,
I made a report with the following code in it and executed it. So I think that should work even if the job for it is not scheduled. There were messages stuck in queue. But no alert was generated. I had also created alert category in ECC.
Thanks and regards,
Siji

Azure Scheduler Job Timeouts and Retries?

We have a WEBAPI running outside of Azure and want to schedule one of the methods with Azure. It loads data from SharePoint Online into an SQL database on-Prem. It can take 15 minutes to complete. I'm doing a GET call to the URI, but
it reports it's FAILED timing out and retrying... from our SQL logs the job appears to complete, though not clear if it ran multiple times. Any way to fix this? No way to adjust timeout and retries in Azure job Scheduler?

Hi,
It looks like you are using the Azure Scheduler service, not the Azure Automation service. Is that correct? This forum is only for the Azure Automation service.
If so, I will move this thread to the Scheduler forum.

Scheduling job problem and modification in the bat file

Dears ALL
i am using the following script in windows 2003 server for oracle database 10 g i have one problem of scheduling the task i scheduled it successfully on windows scheduled task program but its not running at scheduled time and even when i run this bat file manually this give the security warning The publisher could not be varified,Are u sure u want to run this software? when i click on yes then it runs the bat file may be thats the problem in aslo scheduled how to remove this warning
2ndly i want to do some changes in my script like this that it removes the same file older than 3 days means it jst have the last three dumps and will remove the olders the script is as
@echo off
CLS
REM ********************************
SET V_USER=riyadh
SET V_PASSWORD=riyadh
SET V_DB=vis
SET V_DMP_PATH=D:\dump\
REM ********************************
ECHO.
SET EXP_PATH=D:\oracle\visdb\9.2.0\bin\
SET MONTH=%DATE:~4,2%
SET YEAR=%DATE:~10,4%
SET DATED=%DATE:~-7,2%
ECHO ECHO CONNECT AS : %V_USER%/%V_PASSWORD%@%V_DB%
ECHO Backup on : %DATED%/%MONTH%/%YEAR% (DD/MM/YYYY)
ECHO SAVE AS : %V_DMP_PATH%%V_USER%_%DATED%%MONTH%%YEAR%.dmp
ECHO TITLE BACKUP ...%V_USER%_%DATED%%MONTH%%YEAR%
echo.
%EXP_PATH%EXP.exe %V_USER%/%V_PASSWORD%@%V_DB% file=%V_DMP_PATH%%V_USER%_%DATED%%MONTH%%YEAR%.dmp log=%V_DMP_PATH%%V_USER%_%DATED%%MONTH%%YEAR%.log
THANKS A LOT

Solution:
Run gpedit.msc
Go to User Configuration >> Administrative Templates >> Windows Components >> Attachment Manager
i have followd all the steps as it is but when i open the Inclusion list for moderate risk file types its not configured and the msg below this is Supported on: At least Microsoft Windows XP Professional with SP2
and i have windows 2003 server so how to add it or enable it etc
THANKS a lot for ur reply

User Exit/BADI name required for changing schedule lines (VA01 and VA02)

Hi all,
Please tell me an exit or badi for modifying VBEP date i.e. VBEP-EDATU which triggers for a change in any of the following fields:
1. VBAK-KUNNR; 2. VBAK-VDATU and 3. VBAP-WERKS
Currently I tried using USEREXIT_MOVE_FIELD_TO_VBEP and FORM USEREXIT_CHECK_VBEP but nothing is giving me the results as desired.
Pls help, points will b awarded for helpful ans.
thanks
Sangharsh

Have a look at below link which gives details related to user exits in VA01/VA02.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Is there a way to auto-submit numbers for a Text Entry Box and allow for commas or no commas?

During a software simulation, the user can enter either 20,000 or 20000. Both are acceptable. Is there a way to validate both as acceptable answers and auto-submit? Using version 8.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Budget check for PM orders with main and sub-projects

Hello
We have a scenario wherein we have created a main project and a sub-project. We have linked the sub-project to main project. We have also assigned budget to the main project. We have created a PM order wherein we are trying to enter the costs by entering the hours of work. We have configured the budget profile and set the tolerance limites and assigned to main project. The requirement here is we need to have have costs check againt the budget that been available in the main project. But the system is checking the budget of the sub-project. Please share if any specific setting is required to check the budget of main project instea sub-project.
Regards,
Basav

I also double checked, you are right there is no forum for PM, I dont think I could suggest much since there isnt a dedicated forum, but you can try posting this query in the ABAP forum probably some abap'r who has worked with PM module should have a look. Also if possible try to connect with one of the moderators out here and ask for assistance in starting something for PM
Thanks,
GLM

Some thoughts on Permissions Repair Failure and Software Update Failure

Here is what I am thinking about these issues. There are a few documented errors that are common when permissions repair is performed and the general consensus at this point is that these errors do not constitute a grave concern. But not being able to repair permissions at all is not good and having this process take an inordinate amount of time is also not good. Also, having the software update crash or fail to run sucessfully or cause additional problems is not good.
I believe these are indications of a low level corruption of the OS. Where this corruption resides or what caused it is open to speculation and may (will) vary from system to system. In any case, were these problems happening on my computer I would be concerned enough to consider backing up my system and performing a complete reformatting of the hard drive and reinstalling the OS "from scratch". Of course I would attempt all of the "known fixes" first but if these were not successful or were only partially successful, I would reinstall on a reformatted drive. When I say "reformatted" what I mean is that I would delete all partitions, "zero" the drive, create new partitions and go from there.

It's one of the permissions you can safely ignore without any problem. See > http://support.apple.com/kb/TS1448

Price of scheduled job for mobile services

For a mobile service, if I run a scheduled job to get some data from an http source, which is (85 kB) 85,000 bytes in size, every 15 minutes.
Is there any cost to me for the data for the month?
Is there any cost to me for the scheduled job for the month?
If so how much?

Hi,
Base on my experience, only Basic and Standard
mode could use more than one scheduled jobs. But its costs may be included into unit costs. Please see this price page (http://www.windowsazure.com/en-us/pricing/details/mobile-services/
) . For your data, I am not sure you how to save and handle it. If you use sql azure to store, you may pay the sql azure cost by using space. For this billing issue, I suggest you could contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/ .
please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Auto alert mechanism for ATG scheduled job failure and BCC project failure

Similar Messages

Maybe you are looking for