Auto Alerts for Background Work Process

Hello,
I am configuring auto alerts in solution manager. I would like to configure auto alerts for background jobs that's been running for more than 10 hours. Can someone help me with which MTE class to use for this configuration?
Thank you.

Didn't solve. Closing the message.

Similar Messages

  • Increase the number of background work processes for data load performance

    Hi all,
    There are 10 available background work processes in the BW system. We're doing some mass load to multiple ODS.But system uses only 3 background processes. How can i
    increase the number of used background work processes for new data load.
    I tried to change number of prosesses with RSODSO_SETTINGS. But no successes. Are there any other settings need to change?
    thanks,
    Yigit

    Hi sankar,
    I entered the max proc. number into ROIDOCPRMS. But it doesn't make difference. System still uses only 3 of background processes. RSCUSTA2 is replaced with
    RSODSO_SETTINGS in BI 7.0 and this trans. can only change the processes for data activation, SID generation and rollback. I need to change the process numbers for data extraction.

  • Error occurs in background work process.

    Respected Guru's,
    error occurs in two background work process, i have displayed the trace files of both the bgd work process.
    How to rectify this error ?
    Further, can you please help me in identifying the problem, please suggest me good material which gives steps for troubleshooting such error in the developer's and system trace.
    Thank you.
    Dayanandan.a
    Developer trace file for BGD WP 1
    trc file: "dev_w12", trc level: 1, release: "620"                                             
    ACTIVE TRACE LEVEL           1                                                             
    ACTIVE TRACE COMPONENTS      all, M                                                        
    M  systemid   560 (PC with Windows NT)                                                        
    M  relno      6200                                                                            
    M  patchlevel 0                                                                               
    M  patchno    251                                                                             
    M  intno      20020600                                                                        
    M  pid        2864                                                                            
    M                                                                               
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc12 2864) [dpxxdisp.c   1016]                      
    M  <EsNT> Memory Reset enabled as NT default                                                  
    M  calling db_connect ...                                                                     
    M  db_connect o.k.                                                                            
    M  rdisp/reinitialize_code_page -> 0                                                       
    M                                                                               
    M Tue Jul 30 10:22:53 2002                                                                    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M                                                                               
    M Tue Jul 30 10:22:55 2002                                                                    
    M  *** ERROR => SlicLockSema: sema locked [slicshm.c    89]                                   
    M  *** ERROR => SlicShmInit: SlicLockSema failed [slicshm.c    231]                           
    M  *** ERROR => SlicValBufInit: cannot initialize SHM [slicshm.c    299]                      
    M  *** ERROR => SlicValBufRead: license buffer not initialized [slicshm.c    329]             
    M  *** ERROR => SlicCheckBuf: some error reading license buffer contents [slicshm.c    419]   
    M                                                                               
    M Wed Jul 31 00:00:49 2002                                                                    
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD    
    M Thu Aug 01 00:00:49 2002                                                                               
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD                       
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                       
    M                                                                               
    M Fri Aug 02 00:00:49 2002                                                                               
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                       
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020802.AUD                       
    M                                                                               
    M Fri Aug 02 00:14:09 2002                                                                               
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  235]  
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   10641]                                           
    M  ***LOG R18=> ThPrivCommit, ThICommit () [thxxhead.c   11307]                                                  
    M  in_ThErrHandle: 1                                                                               
    M  *** ERROR => ThPrivCommit: ThICommit (step 4, th_errno 9, action 2, level 1) [thxxhead.c   8277]              
    M                                                                               
    M  Info for wp 12                                                                               
    M                                                                               
    M    stat = 4                                                                               
    M    reqtype = 4                                                                               
    M    act_reqtype = 4                                                                               
    M    tid = 12                                                                               
    M    mode = 0                                                                               
    M    len = 24                                                                               
    M    rq_id = 6638                                                                               
    M    rq_source = 1                                                                               
    M    last_tid = 12                                                                               
    M    last_mode = 0                                                                               
    M    rfc_req = 0                                                                               
    M    report = >                                        <                                                         
    M    action = 16                                                                               
    M    tab_name = >                              <                                                                 
    M   
    M                                      
    M  Modeinfo for User T12/M0            
    M                                      
    M    tm state = 2                      
    M    uid = 13                          
    M    term type = 0x0                   
    M    display = 0x0                     
    M    cpic_no = 0                       
    M    cpic_idx = -1                     
    M    usr = >SAPUSER     <              
    M    terminal = >                    < 
    M    client = >800<                    
    M    conversation_ID = >        <      
    M    appc_tm_conv_idx = -1             
    M    imode = 3                         
    M    mode state = 0x42                 
    M    th_errno = 9                      
    M    async_receives = 0                
    M    cpic_receive = 0                  
    M    em handle = 2                     
    M    roll state = 4                    
    M    abap state = 4                    
    M    em state = 3                      
    M    eg state = 1                      
    M    lock = 0                                                                               
    Developer's trace file for BGD WP 2
    trc file: "dev_w13", trc level: 1, release: "620"                                             
    ACTIVE TRACE LEVEL           1                                                             
    ACTIVE TRACE COMPONENTS      all, M                                                        
    M  systemid   560 (PC with Windows NT)                                                        
    M  relno      6200                                                                            
    M  patchlevel 0                                                                               
    M  patchno    251                                                                             
    M  intno      20020600                                                                        
    M  pid        2872                                                                            
    M                                                                               
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc13 2872) [dpxxdisp.c   1016]                      
    M  <EsNT> Memory Reset enabled as NT default                                                  
    M                                                                               
    M Tue Jul 30 10:21:44 2002                                                                    
    M  calling db_connect ...                                                                     
    M  db_connect o.k.                                                                            
    M                                                                               
    M Tue Jul 30 10:22:25 2002                                                                    
    M  rdisp/reinitialize_code_page -> 0                                                       
    M                                                                               
    M Tue Jul 30 10:22:53 2002                                                                    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M                                                                               
    M Wed Jul 31 00:00:52 2002                                                                    
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD    
    M                                                                               
    M Thu Aug 01 00:00:49 2002                                                                    
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                      
    M                                                                               
    M Fri Aug 02 00:00:51 2002                                                                               
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                      
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020802.AUD                      
    M                                                                               
    M Fri Aug 02 00:14:09 2002                                                                               
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  235] 
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   10641]                                          
    M  ***LOG R18=> ThPrivCommit, ThICommit () [thxxhead.c   11307]                                                 
    M  in_ThErrHandle: 1                                                                               
    M  *** ERROR => ThPrivCommit: ThICommit (step 4, th_errno 9, action 2, level 1) [thxxhead.c   8277]             
    M                                                                               
    M  Info for wp 13                                                                               
    M                                                                               
    M    stat = 4                                                                               
    M    reqtype = 4                                                                               
    M    act_reqtype = 4                                                                               
    M    tid = 13                                                                               
    M    mode = 0                                                                               
    M    len = 24                                                                               
    M    rq_id = 6643                                                                               
    M    rq_source = 1                                                                               
    M    last_tid = 13                                                                               
    M    last_mode = 0                                                                               
    M    rfc_req = 0                                                                               
    M    report = >                                        <                                                        
    M    action = 16                                                                               
    M    tab_name = >                              <                                                                
    M                                                                               
    M  Modeinfo for User T13/M0                                                                               
    M                                                                               
    M    tm state = 2                      
    M    uid = 14                          
    M    term type = 0x0                   
    M    display = 0x0                     
    M    cpic_no = 0                       
    M    cpic_idx = -1                     
    M    usr = >SAPUSER     <              
    M    terminal = >                    < 
    M    client = >800<                    
    M    conversation_ID = >        <      
    M    appc_tm_conv_idx = -1             
    M    imode = 3                         
    M    mode state = 0x42                 
    M    th_errno = 9                      
    M    async_receives = 0                
    M    cpic_receive = 0                  
    M    em handle = 3                     
    M    roll state = 4                    
    M    abap state = 4                    
    M    em state = 3                      
    M    eg state = 1                      
    M    spa state = 3                     
    M    enq state = 0                     
    M    next hook = T-1/U-1/M255          
    M    master hook = T-1/U-1/M255        
    M    slave hook = T-1/U-1/M255         
    M    debug_tid = -1                    
    M    mode type = 0x1                   
    M    debug = 0                         
    M    lock = 0                          
    M                                      
    M                                      
    M Sat Aug 03 00:00:55 2002
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020803.AUD
    M                                                                               
    M Sun Aug 04 00:00:49 2002                                                                
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020803.AUD
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020804.AUD
    M                                                                               
    M Mon Aug 05 00:00:49 2002                                                                
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020804.AUD
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020805.AUD
    M                                                                               
    M Tue Aug 06 00:00:49 2002                                                                
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020805.AUD
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020806.AUD

    Thank you, Bhaskar,
    I have performed consistency check for temse objects and all the comments are displayed in red color.
    Does it mean that objects are inconsistent. But, no comments states that object are inconsistent.
    I have attached the comments displayed,
    Consistency check of table TST01 / TemSe objects
    This comment occurs repeatedly, Unable to access the related file           Length = 0
    Incorrect number of data lines in TST03              
    Object with part number 1 missing
    Object reset                     Length = 0
    The related file has an incorrect length
    Consistency check of table TST03 / TemSe data
    No object found in TST01
    May i delete all objects, as all the comments are red in color.
    Dayanandan.A

  • Function module in background work process

    Hi All,
    i'm using trfc for processing FM only in background work process
    CALL FUNCTION 'FUNCTION_MODULE' IN BACKGROUND TASK
    but when i execute FM it's occupying two work process one is dialog (running current FM )and another one is background( running SAPLERFC) .
    so pls suugest me how to avaiod FM to occupy dialog workprocess.
    Regards,
    Anuj jain

    Hi Anuj,
    It unfortunately means:
    start FM in a particular time in Dialog work process
    The BACKGROUND word in abap syntax is misleading.
    For true background processing, i.e. background WORK PROCESS (of type BGD in SM50)
    ONLY  ABAP PROGRAMS or Commands or External Programs
    can be run under background work process. (as per SM36)
    Here we are trying a function module, which is not supported. This is as per my understanding.
    regards,
    amit m.
    Edited by: Amit Mittal on Aug 17, 2010 2:03 PM
    Edited by: Amit Mittal on Aug 17, 2010 2:05 PM

  • Free background work process

    Hi All,
    how to check statistics of free background work process in the system.
    Regards,
    MK

    Hello Manikandan,
    RZ20 has a monitor for this under
    RZ20 --> SAP CCMS Monitor Templates
                   --> Background Processing
                        --> System Wide
                             --> Background
                                 --> BackgroundService
                                      --> SystemWideFreeBPWP
    If you need statistics for a longer time period you can activate collection of data for this MTE in CPH.
    Regards,
    Alwina

  • Background work process On-hold

    Hello,
    There is a background job running in Production system for more that 10000ms.
    Background work processes is on-hold and the resaon is ARFC.
    Following is the log file:
    X Thu Jun 11 07:31:10 2009
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
    Can any one help.
    Trupti

    Hi,
    In addition to above check below links. it speaks about same error message.
    Re: Kernel upgrade to 700.175 UC incresing the dev_w0 log drastically
    Re: RFC_VMC_COMMUNICATION_ERROR
    Thanks
    Sushil

  • How to find out number of background work processe available in the system?

    Hi All,
    I have a FM that triggers a background job using JOB_OPEN, ABAP_SUBMIT and JOB_CLOSE. But the problem is if there are no background work processes available at that moment, it does not return error. Not sure whether the job is even scheduled!
    Is there a way to find out if there are any background work processes available in the system? I know a FM SPBT_INITIALIZE which gives info about dialog work processes. Is there any other FM similar to this which gives info about background wp??
    Regards,
    Shailesh

    your Job will remain in a queue by message handler. once workprocess is free, your job gets scheduled
    by the way, you can use the functionality used in FM TH_DISPLAY_WORKPROCESS_LIST to read the workprocesses
    the command which gets you the workprocess is:
    CALL 'ThWpInfo' ID 'OPCODE' FIELD OPCODE_WP_LIST
                      ID 'TAB' FIELD LIST_STATE_WPLST-TABL
                      ID 'CPU' FIELD LIST_STATE_WPLST-CPU.
    check how its written in include LSDEBF01, form SET_LIST_WPLST
    Edited by: Soumyaprakash Mishra on Dec 12, 2011 12:17 PM

  • Calling subroutine perform background work process

    Hi all,
    Can we call a perform (subroutine)in background work process in a program.
    if yes, pls specify.
    regards,
    Anuj

    Anuj,
    we can call the subroutine..whether it is foreground or background..if the perform statement is used the respective routine is called . Can you be specific on the requirement you are looking after..
    Sagar.

  • Background work process

    How to increase the background work processes on BW SYSTEM
    Thanks your help in advance
    Msr

    - start transaction RZ10
    - open your instance profile
    - edit it using the "Basic Maintenance" radio button
    - increase the background processes
    - save
    - confirm
    - restart the instance
    Markus

  • Update Work Process and Background work process

    Hi Friends,
    I have a doubt regarding the "Update Work Process and Background work process" ......
    which one is used at what scenario ?????
    If not wrong --> update work process is used when there is an update task .........??? and similarly If background work process is used when there a background task is given explicitly .........???
    Can we can update anything through Background>????
    If yes .... which workprocess will be selected at that time??????
    Expecting your answers ??
    Thanks in advance !!
    Cheers
    R.Kripa.

    HI
    GOOD
    UPDATE WORK PROCESS->
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/content.htm
    BACKGROUND WORK PROCESS->
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4a/2d513897110872e10000009b38f889/content.htm
    THANKS
    MRUTYUN

  • Which mac is really good for hdv working process and render??

    I'll work my hdv native workflow soon and I'm really very interesting on how to get the most of Mac product,s but I'm still asking me what is the minimun of features do I need on a MAc to process without any disturb or overload and render my video in Blu ray for distribution and broadcasting purposes.

    The MacBook Pro provides one key advantage not possible with the 12-inch PB -- the ability to create a second firewire bus using the ExpressCard/34 slot.
    In this manner, you can separate fw drives from camera/deck -- a big issue with FCP5 and certain cameras and hard drives.
    It is a key difference for anyone considering video editing.
    You'll get a beefier video card, and the ability to preview.

  • Need to create Server group for Background processes

    Hi Gurus,
                  I need to increase my background work process can anyone tell me how to configure it.There is only 1 background work process configured in my installation.
    Thanks,
    Ravi

    HI Ravi
    When you goto transaction rz10, you will rightly get 3 profiles,namely
    Default profile
    Start profile
    Instance Profile
    Out of the three, select the instance profile ( the one with the SID and the instance number) and get in the change mode by clicking on the spectacle button in the bar.
    Further you will find the parameter rdisp/wp_no_btc in this profile. This parameter indicates the no. of background work processes set for this particular instance,
    Change the value for this parameter. Also note that the no. ny which u increase the batch proceses, also reduce the dialog process by the same number in parameter rdisp/wp_no_dia.
    Restart the system and the changes will come into effect.
    I hope this helps you
    Regards
    Chen

  • Does back ground jobs work process go to private mode or not

    Hi Experts,
    Can any one tell me
    Does back ground jobs work process go to private mode or not
    Thanks and Regards
    Dan !!

    Hi Dan,
    I do not think background work processes would go into PRIV mode.
    the orginal information was remove by Admin because provided by Cut and Paste from SAP Online Help.
    you will find it <a href="http://help.sap.com/saphelp_47x200/helpdata/en/7a/caa6f3bfdb11d188b30000e83539c3/frameset.htm">here</a>
    The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you.
    By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX.
    DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.

  • Work process configuration

    Hello gurus,
    I'm searching for note or document that describes the stardard sap configuration for work processes specially background work process.
    Please advice,
    Dimitry Haritonov

    Hi Dimitry,
    For windows boxes, I generally start with the base recommendation for the number of WP's (not just DIA's) and work backwards from there (balancing the number of DIA's with the number of Batch WP's).
    Generally, DIA and BTC wp's consume the same base level of resources but can be set to different limits (as far as memory usage).
    Below are some links that further describe the memory settings for windows boxes (wasn't sure if you had a chance to look through these).
    [Determining the Number of Work Processes|http://help.sap.com/saphelp_nw70/helpdata/EN/02/962817538111d1891b0000e8322f96/frameset.htm]
    [ztta/roll_extension_nondia: EM Quota for Non-Dialog Work Processes|http://help.sap.com/saphelp_nw70/helpdata/EN/dd/d0256805734b8b849c14c9cb33a266/frameset.htm]
    Is that the kind of information you are looking for?
    Thanks,
    ~jph

  • Reg: Long Running BTC work process

    Hi Expert,
                  Yesterday and today i check SAPMMC only one background work process still  running (48 hours), How to analyse  and why running for long time please explain for me.  SM50  in transaction code also stilll one btc workprocess running.
    BTC 3196 RUN     YES     48:11:32     156101     SAPLTHFB,
                                                                            SAPLSKTM,
                                                                            SAPLOLEA,
                                                                            SAPMSSYD 001     BASIS
    Please give solution i will give reward points..
    Thanks,
    Selva

    see if this is helpfull
    http://forums.sdn.sap.com/thread.jspa?threadID=1406031

Maybe you are looking for

  • Embedded art in MP3 ID3v2 tags

      Apologies if the title is confusing. Hopefully the explanation is less so. I've a pet project where I'd like to display embedded MP3 album art. Using TagLib#, implemented the standard methods (ID3v1 was straightforward and ID3v2 only slightly more

  • Characters and Text print as boxes

    I have an Epson 5700i and I recently began having problems with printing. I use MathType 5.1 to write math text which looks fine on "print preveiw", but shows up as little boxes on paper. It didn't use to do this and I have no idea what I may have ch

  • Getting error message when click on the the link in Site Setting

    I have 3 tear installation for SharePoint 2013 : DB Server, App Server & WFE server.  I am getting the below mentioned error when I go to Site Action -> Site Setting -> ....... Error being shown: System.InvalidOperationException: Could not find endpo

  • Growth PSAPBWPODS

    Hi Gurus, a few months ago we was create a Z process chain in our SAP BI system that is execute daily for improve performance. The PC do this 5 steps for some BPS infocubes: 1. Load Mode On 2. Create DB Statistics 3. Delete DB Indexes 4. Create Index

  • Having problem installing Snowleapord, going back from lion.

    I own MBP 2.66C2D 13" 2010, I downloaded and installed lion very first day, before that i was felling my system response is getting quiet slow, after intalling lion i felt that i should refresh my machine from scratch so i can have every thing back (