Auto align layers

I have downloaded a 30 day trial of Photoshop CS3 Extended. I use Windows XP. In the demo on the adobe.com site, there appears to be a feature where you can align 2 images such as a group shot, where you want to take a face from one image and put it in the other image. Can you please tell me how this is done? Thanks for your help.

This info is available in many places. A good place to start would be the help file (f1), another google.com.
But since you bothered to find this forum and ask your question here:
Bring all your images into one file as layers. Select all layers by shift-clicking them. Go Edit>Auto Align Layers.

Similar Messages

Analog of Auto Align Layers and Auto Blend Layers?

In Photoshop you can use Auto Align Layers then Auto Blend Layers to select the region that is in focus from each layer. How can I do the same thing in PSE 9? Thanks.

No, you really can't do focus stacking in PSE without a third party plug-in of some sort. This thread is about PSE 8, but it applies to PSE 9 as well:
http://forums.adobe.com/message/2514826

Auto-align Layers and Merge to HDR Pro crashes

Hi,
Has anybody else experienced crashes with Merge to HDR Pro or Auto-align Layers? I was trying to use Merge to HDR Pro from Lightroom and was experiencing crashes every time after it had opened all of the images and merged them into a single document (but before the HDR Pro dialog box had come up).
I've tested this further with opening each image individually and then trying to merge them as well as via Bridge and always get the same result.
I had then decided to try layering the images and blend them to create my HDR image and that's when I found that Auto-align Layers was crashing as well. This leads me to believe that it's actually the auto-align functionality that's causing the crash rather than Merge to HDR Pro as I'm pretty sure that the merge functionality performs an auto-align as part of its steps.
Any suggestions on how to fix this? I'm wondering if I may have to completely remove Photoshop. I can do this if necessary but if there's some other way to fix this I'd rather try that first.

Okay, solved my own problem. I bit the bullet and did do a reinstall. I'd remembered that one of the previous Photoshop upgrades had failed (either 12.0.1 or 12.0.2) and I'd never gotten around to fixing it. Looking into that suggested reinstalling as the solution so I figured I should try uninstalling and reinstalling then apply all the upgrades and then try it again.
This time the upgrades did go through properly and I was just able to do a merge to HDR pro successfully so it looks like that's fixed the issue.

Auto Align Layers not working

Hello,
I am trying to auto align layers from a commercial job to mask different exposures and flashes in and out.
Every time I try to auto align, it doesn't work.
I make them JPGs in Lightroom and bring them over to photoshop.
I add a base layer and then upload the other exposure/light layers.
I make a group to add the exposures into but not the base layer.
Select them all.
Go to Edit - Auto Align Layers - but its always greyed out.
I am extremely frustrated. Help.
Kelsey

Try unlocking the base layer. Not sure if that'll effect it, but I could see it not wanting to auto-align if a layer was locked, even the base layer.
I would also try auto-aligning as soon as you import, before grouping. Shouldn't make a difference, but I do some RE/architectural work myself, and have never run into issue with my workflow (from lightroom I choose "open as layers in Photoshop", then autoalign, then group and mask and edit). Though I don't usually run auto-align. I assume you're on a tripod, did something move?

Auto Aligning Layers

Hi there,
I am trying to combine 2 images together in photoshop CS4, and have managed to open the images as separate layers under one file and select them together. But when I click Edit>Auto-Align Layers>Auto, all I see is a pop-up saying "Layers do not overlap enough to detect alignment, in general images should overlap by approx 40%". What should I do? I have already resized them to be equal in size. Please help..Thank you!

To give a bit of a more real world example, here are two images that I'd like to align:
#1
#2
Here is approximately how they overlap:
Here they are auto aligned:
With the distrotion that happens (it's like a 3D view of what the camera movement was to take these two pictures). We can see that the overlap will shift slightly, so if there isn't enough of the same material overlapping, you may not have enough to cover this distortion.
Can you post the images you are working with?

Auto-Align Layers using AS

It is possible to Auto-Align Layers using AppleScript?
I cannot find the command in the Dictionary.
Otherwise the only solution is to call an action that call Auto-Align Layers.
Stefano

Capste, an alternative to calling an action is to use script listener output code in your applescript and call this with do javascript. This way you need no external items. This should work as long as you have more than one layer selected when calling it. The six options should be self evident in the commented applescript line above the handler call.
tell application "Adobe Photoshop CS2"
activate
set Doc_Ref to the current document
tell Doc_Ref
-- AdLf, AdRg, AdCH, AdTp, AdBt, AdCV
my Align_Layers(Doc_Ref, "AdCH")
end tell
end tell
on Align_Layers(Doc_Ref, Align_Ref)
tell application "Adobe Photoshop CS2"
tell Doc_Ref
do javascript "Align_Layers(); function Align_Layers() {function cTID(s) { return app.charIDToTypeID(s); }; function sTID(s) { return app.stringIDToTypeID(s); }; var desc01 = new ActionDescriptor(); var ref01 = new ActionReference(); ref01.putEnumerated( cTID('Lyr '), cTID('Ordn'), cTID('Trgt') ); desc01.putReference( cTID('null'), ref01 ); desc01.putEnumerated( cTID('Usng'), cTID('ADSt'), cTID('" & Align_Ref & "') ); executeAction( cTID('Algn'), desc01, DialogModes.NO );};" show debugger on runtime error
end tell
end tell
end Align_Layers

CS5 - Why are Edit Auto Blend Layers (and Auto Align Layers) gray and not accessible?

I have CS5 and would like to try focus stacking. I File > Automate > Photomerge with a few photos. They have been aligned in layers. I would like to Auto Blend Layers but the function is gray and not accessible.
Thanks,
Mark

Thank you THANK YOU. As I was doing this I realized you asked me to show my selected layers. I haven't been doing that. I thought photoshop would blend all open layers. Thanks again.

Auto align layers moves my locked layer?

I am using CS4 and I want to align a couple of layers. I have no problem getting it to work, except for the fact that it will move all of my layers, even my background layer wich is locked. I thought that if you first locked a layer, then selected the other layers, all of those unlocked layers would be aligned to the locked layer? I want to keep that background layer from moving.
Thanks,
Steve

Yes the new Auto-align feature in Photoshop should be better implemented than it is. Locking the Movement of layers should certainly regsiter with Auto_align, and its quite ridiculous that it doesn't. If all selected layers happen to be locked then a warning should come up
D. Fosse has your answer over how to do this at present, it requires re-ordering your layers.
You should post a Feature Request about this.

Locking Layers & Auto Align

I noticed that when you go to use Auto Align, if you have one layer with transparency locked and one layer without transparency not locked, select both layers and run Auto Align, it will move the layer that is locked rather than the one that is unlocked. Just curious if this is normal.
Correction: Actually it moves both layers. Rather than aligning one to the other and keeping the locked one where you want it, both layers are moved.

It looks like the auto align layers button is greyed out because some of your layers are smart objects.
You should rasterize the smart object layers and then auto align should work.
Select the smart object layers in the layers panel, right click on one of the layers and choose Rasterize Layers.

I want to find out if PS Elements 11 has Auto-Align

Does PS Elements 11 Have Auto-Align or is this CS5 application?

If what your referring to is Edit>Auto-Align Layers that is in photoshop, then no.
Perhaps this thread over on elements village will help you out:
Focus Stacking in PSE 11/12 - Elements Village

Align layers CS5

Hi, It might be too easy for many of you. But i am struggling aligning few layers altogether. I have set of different scan 2D images (artwork). I like to either auto or any other neat way to align them. Currently I am using move tool with transform to do the job. But at times it become laymen / work. Any help is appericiated.

I don't think Auto Align Layers is going to be able to bite on this since there's very little that's common between layers. You're probably stuck with lining them up by hand.
You say you're having to transform them... These scans seem quite inaccurate, since the size from one side of the image you posted to the other seems several pixels off. For printed circuit layouts I should think accuracy would be paramount. If the sizing/spacing was accurate from scan to scan, and additionally the vertical/horizontal registration was good, your job would just boil down to alignment, no?
I guess I'm just not getting a good mental picture of what you're doing here.
-Noel

Does PS Elements 11 have Auto-Align if so where & how to use

does PS Elements 11 have Auto-Align if so where is it and how to use it.

What exactly are you looking for? If you want to align layers, yes, you can do with the move tool.

Eraser + Auto-Blend layers = problem

Hello,
I've been using "Auto-Blend layers" to edit faces in Photoshop. For example: putting Brad Pitt's face on Tom Cruise's face or something like that... However, I seem to have the exact same problem each time.
I use the following method:
Two layers (layer 1 = background = original person) + face of new person (layer 2 = cut out from different .psd with pen tool).
Align faces with eachother (try to match eyes/lips/nose)
Erase parts to make it fit better
Select pixels layer 2
Select "Inverse" layer 2
Select Modify -> Expand -> 6px layer 2
Select "Inverse" layer 2
Delete selected part on the layer 1 with background (layer 1 original face gets deleted)
Select both layers
Auto-Blend Layers
Result done
This entire method works fine, except for the eraser part. (Erase parts to make it fit better) When I use my eraser on the new face to erase some parts that overlap the original face or something, it always turns out bad after using Auto-Blend layers. You can see parts of the transparent background -> it doesn't fit properly. This only happens when I use the eraser. When I use the entire method without fixing some parts with the eraser, it works fine but this way the face doesn't fit 100% since certain details don't match.
Anyway, I wonder why the eraser messes up Auto-Blend layers. I even tried moving the new face (I used eraser on) to a new .psd with the same original person and Auto-Blend layers keeps having parts of the transparent background when the faces get auto-blended. How can I fix this?

You probably would have to go into the mechanics of what the auto blend layer tool is doing. It is meant to stitch two images together such as a panarama. Your case is a little different and erasing may disturb the way the tool combines the underlying layers.

Auto-Align won't come up

When I try to use the Auto Blend feature of Photoshop CS5 it does not come up highlighted and I can't use it! How do I activate this feature? It is found under the edit menu. Also when I tried to update, a message comes up to close Photoshop .exec. What is this and where is it and how do I close the program in order to complete the updates I want??? Thank you so much for any help you can give me. I am sooooo frustrated!

For auto blend and auto align you need to
have two or more layers selected (active in the layers panel)
http://help.adobe.com/en_US/photoshop/cs/using/WSA75E6997-6EB8-4bf7-8E18-ACE6CC02DCDDa.htm l
Check in the task manager for photoshop or bridge running.
MTSTUNER

Auto align images and save them individually

Is there a way to let photoshop auto align images and then save them to separate .tiff files?
Best regards

File > Scripts > Export Layers to Files
Don't forget to crop the auto aligned imaged so that all layers share the same outline.

Auto align layers

Similar Messages

Maybe you are looking for