Auto Analyzer Error Message

Dear all
I am expereincing an error message : Auto analyzer encountered serious error. I am running Elements 11 on windows XP.This is happening on a fresh installiation of XP Professional also same error message appeared on old XP installiation. Any thoughts on this problem. Will be grateful for any help.
Regards Sully

Hi,
Could you please tell what happens post that. Can you use Organizer after that?
Please turn off Media Analysis from Edit>preferences which are specifically for Auto Analyzer.
Regards,
vaishali

Similar Messages

  • Avoid blank page with Auto TR error message in PDF

    Experts,
    We have forwarded auto TO error message from SAP inbox (SBWP) to outlook email.We made the settings to convert all messages to be converted into PDF while receiving into outlook inbox.For some reason, i am getting the first page as blank with error message.why is this happening? Please suggest
    thanks in advance

    Hi Patrick,
    It should work. You know the id of the specific area, you know what string to search for in order to condition the appearance of the new message.
    Kind Regards,
    Alex

  • YDBN - Extract Auto Payment: error message at spool file

    Hi,
    I run YDBN, Extract Auto Payment, and there is an error message at spool file as follows:
    WARNING  ##################
       Please check the DBERROR.TXT file     #
    Bene Account Length is too long.        #
    Does anyone know what is this?

    The Y* and Z* namespaces are reserved for end-users.  YDBN is a transaction custom to your site!

  • BEx Web Analyzer error message

    Hi,
    I've integrated BI 7.0 with Portal 7.0. Both systems (BI and Portal) running on different servers, SSO is configured both ways and RFC communication is configured from ABAP to J2EE. However when i run the BEx Web Analyzer iView under the Business Intelligence role, i get the following error:-
    The initial exception that caused the request to fail, was: 
         No logical system exists for client 800                            
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      No logical system exists for client 800                            
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
    at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3962)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3399)
    at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:255)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "RSWR_METADATA_GET" against system "BIXCLNT800"
    at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:49)
    ... 44 more
    Caused by: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      No logical system exists for client 800                            
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
    at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3962)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3399)
    at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:255)
    at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Function.executeRfc(Jco640Function.java:73)
    at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:47)
    ... 44 more
    Any help on this would be greatly appreciated
    - V

    Priya, ya its already there/..this is the SM50 trace
    N  dy_signi_ext: ticket expired
    N Mon Jun  4 17:57:44 2007
    N  dy_signi_ext: SSO TICKET logon (client 800)
    N  mySAPUnwrapCookie: was called.
    N  HmskiFindTicketInCache: Trying to find logon ticket in ticket cache.
    N  HmskiFindTicketInCache: Try to find ticket with cache key: 800:BB1DDE5432D1DBECA778E0DC15AA6852 .
    N  HmskiFindTicketInCache: Couldn't find ticket in ticket cache.
    N  I don't need to ask RunningCompatibly to know: I'm >= 46C.
    N  mySAP: Got the following SSF Params:
    N         DN     =CN=BIX
    N         EncrAlg=DES-CBC
    N         Format =PKCS7
    N         Toolkit =SAPSECULIB
    N         HashAlg =SHA1
    N         Profile =/usr/sap/BIX/DVEBMGS20/sec/SAPSYS.pse
    N         PAB =/usr/sap/BIX/DVEBMGS20/sec/SAPSYS.pse
    N  Got the codepage 4102.
    N  Got ticket (head) AjExMDAgAA9wb3J0YWw6ZXBfYWRtaW6IAAdkZWZh. Length = 492.
    N  MskiValidateTicket returns 0.
    N  Got content client = 000.
    N  Got content sysid = EPX     .
    N  Got date 200706042239 from ticket.
    N  Cur time = 200706042257.
    N  Computing validity in hours.
    N  Computing validity in minutes.
    N  CurTime_t = 1181084220, CreTime_t = 1181083140
    N  validity: 120, difference:   1080.000.
    N  *** ERROR => HMskiCheckValidity failed. [ssoxxkrn.c   856]
    N  dy_signi_ext: ticket expired
    Vaib

  • Bex analyzer error message

    Dear gurus,
    I have created a user exit variable, and created on customer exit EXIT_SAPLRRS0_001 what i need.
    My problem is that when a value is not found, on the exit i send a message to screen:
    MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' with sy-uname RAISING dummy_exception.
    If i test query on transaction rsrt, the message is sent to screen, but when i try to do it on bex analyzer message is not sent.
    Could someone help me on this?
    Thanks in advance,
    Vitor Ramalho

    Frank,
    Here goes the code.
      WHEN 'Z_TIPO_MOEDA'.
    Adicionado a 27.08.2009 por VCAVACO
    Validação do Tipo de Moeda de acordo com Centros de Custo
        CLEAR: range, range_n, ind, ind_n, n_preench, preench, sucesso.
        IF i_step = 2.
    Seleccionar o campo pretendido
          LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'Z_REST2_CC'.
            IF loc_var_range-opt EQ 'BT'.
         Quando é um range de valores o só entra no loop 1 vez
              SELECT  * FROM zgtap_og_cc_mt INTO TABLE lt_zgtap_og_cc_mt_aux
                 WHERE ( ( centro_de  >= loc_var_range-low AND centro_de  <= loc_var_range-high )
                    OR   ( centro_ate >= loc_var_range-low AND centro_ate <= loc_var_range-high )
                    OR   ( centro_de  <= loc_var_range-low AND centro_ate >= loc_var_range-high ) ) .
              IF sy-subrc EQ 0.
                LOOP AT lt_zgtap_og_cc_mt_aux.
                  MOVE lt_zgtap_og_cc_mt_aux TO lt_zgtap_og_cc_mt.
                  APPEND lt_zgtap_og_cc_mt.
                ENDLOOP.
               Se é encontrado algum registo na tabela que contenha algum dos centros do range,
               guarda os extremos do range e marca com sucesso a consulta
                lt_range-centro_de  = loc_var_range-low.
                lt_range-centro_ate = loc_var_range-high.
                APPEND lt_range.
                range = 'X'.
              ELSE.
               Caso não encontre nenhum registo, preenche o campo range_n que dita o não sucesso da consulta
                range_n = 'X'.
              ENDIF.
            ELSEIF loc_var_range-opt EQ 'EQ'.
         Quando são valores individuais faz o select para cada registo, ou seja,
         percorre o loop várias vezes
              SELECT * FROM zgtap_og_cc_mt
                 INTO TABLE lt_zgtap_og_cc_mt
                      WHERE ( centro_de  <= loc_var_range-low
                        AND   centro_ate >= loc_var_range-low ).
              IF sy-subrc EQ 0.
               Marca como sucesso a consulta do registo
                ind = 'X'.
              ELSE.
               Marca como não sucesso a consulta do registo
                ind_n = 'X'.
              ENDIF.
            ELSEIF loc_var_range-opt EQ 'CP' AND loc_var_range-low = '*'.
              SELECT * FROM zgtap_og_cc_mt
               INTO TABLE lt_zgtap_og_cc_mt.
              IF sy-subrc = 0.
                n_preench = 'X'.
              ELSE.
                preench = 'X'.
              ENDIF.
            ENDIF.
          ENDLOOP.
         Quando nenhum dos centros estiver na tabela o tipo de moeda deve ser 20
          IF ( range_n EQ 'X' AND range = ' ' ) OR ( ind EQ ' ' AND ind_n EQ 'X' ) OR preench = 'X'.
            CLEAR l_s_range.
            l_s_range-low  = '20'.
            l_s_range-high = '20'.
            l_s_range-sign = 'I'.
            l_s_range-opt  = 'EQ'.
            APPEND l_s_range TO e_t_range.
         Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
          ELSEIF ind EQ 'X' AND ind_n EQ ' '.
            CLEAR l_s_range.
            l_s_range-low  = '00'.
            l_s_range-high = '00'.
            l_s_range-sign = 'I'.
            l_s_range-opt  = 'EQ'.
            APPEND l_s_range TO e_t_range.
         Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
          ELSEIF ( ind EQ 'X' AND ind_n EQ 'X') OR n_preench = 'X'
              OR ( range = 'X' AND range_n = 'X' ).
           MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER 023 INTO l_dummy.
           g_message->add_msg( ).
           MESSAGE i023(zmiicf).
            MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
          ELSEIF range = 'X' AND range_n = ' '.
          Quando um dos centros do range existir na tabela, deve verificar se todos os centros do range
          são contemplados na tabela
            LOOP AT lt_range.
              LOOP AT lt_zgtap_og_cc_mt WHERE centro_de  <= lt_range-centro_de
                                          AND centro_ate >= lt_range-centro_ate.
              ENDLOOP.
              IF sy-subrc NE 0.
         Quando um dos centros existir na tabela, mas não forem todos, deve dar mensagem erro
                MESSAGE ID 'ZMIICF' TYPE 'E' NUMBER '023' WITH sy-uname RAISING dummy_exception.
               MESSAGE i023(zmiicf).
              ELSE.
                sucesso = 'X'.
              ENDIF.
            ENDLOOP.
            IF sucesso = 'X'.
         Quando todos os centros existirem na tabela o tipo de moeda deve ser 00
              CLEAR l_s_range.
              l_s_range-low  = '00'.
              l_s_range-high = '00'.
              l_s_range-sign = 'I'.
              l_s_range-opt  = 'EQ'.
              APPEND l_s_range TO e_t_range.
            ENDIF.
         ENDIF.
          ENDIF.
        ENDIF.
    Many thanks,
    Vitor Ramalho

  • "Auto-Analyzer has skipped one or more file(s) because of potential errors"

    Because of size of my photo library (>5k pics) I decided to switched of automatic auto-analyzer.
    But when I use Auto-Analyzer from context menu on a single photo I always get message "Auto-Analyzer has skipped one or more file(s) because of potential errors". Why?
    PSE 9 Organizer

    I have the same problem with just one of 6000 images in my library. It is a straigthforward jpg. The image is not corrupt and the thumbnail is produced just fine. PSE can edit the image perfectly.
    Dimenionally it was quite large so I produced scaled down 1920-wide image but that too will not be analysed.
    It is quite an unusual image taken at dawn on the top of a mountain in Bali with lots of mist. I don't know, I think maybe the auto analyzer might sometimes fail to reach a conclusion about the tags to apply. kondzik, is your image "unusual" in anyway?

  • Automatic Downloads and Strange Error Message: "You can auto-download purchases on this computer with just one Apple ID every 90 days"

    Hi gang-
    Yesterday I noticed that iTunes on my iMac had not auto-downloaded several new songs that I had recently purchased on my iPhone.    In iTunes Preferences, under Store -> Automatic Downloads, I always have Music selected so all songs purchased from any device using my Apple ID normally download automatically.
    To troubleshoot this, I double-checked my Preferences and sure enough, Music was de-selected under Automatic Downloads.   I then Selected it and clicked OK.   Here's where it gets weird and I get this error message:
    This computer is already associated with an Apple ID.  You can auto-download purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 84 days.
    I read and re-read this message and none of it seems to apply to me.   I have only one Apple ID.   I am currently logged in with iTunes to that one Apple ID.   All my iTunes Music ever has been purchased with that one Apple ID.   I am not trying to associate this computer or any other with a different Apple ID.
    I logged iTunes out and then back in again and tried all the above- but same error message.
    So, as it is now, I am unable to turn on Automatic Downloads in iTunes.   
    Anyone know what the heck is going on?
    Thanks!
    Dave

    Hey gang-
    Okay, this gets more and more bizarre.   I sent a support email to Apple and basically they said  "...it seems that someone else associated your Mac with their Apple ID. That's the reason your purchases won't download."
    Yikes!   My wife and I live alone- and we have exactly one and only one Apple ID.    Would somebody have needed physical access to my iMac to do that?
    Support then said "You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer."
    Okay- so I logged into My Account in iTunes.   On the list of associated devices, my own iMac is NOT on that list.   But I am logged in under the same Apple ID I've had for years on that iMac.
    So my big question right now is...if my iMac (that I've owned for 5 years) has somehow been dis-associated from my Apple ID, how do I find out what Apple ID it is associated with?
    Thanks gang for trying to help me unravel a mystery.
    Dave
    PS- Here's an Apple Tech article on iTunes associations, but it doesn't really go beyond what we've discussed above:
    http://support.apple.com/kb/HT4627

  • RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

    Hi, all,
    Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
    This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
    This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
    As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
    Any advice you could give would be welcome.

    Hi there
    Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
    Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
    The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
    Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Error message...while accessing the  BEx Web Analyzer on EP7

    hi experts,
    i have deployed and configured BI java on portal server.and while accessing the roles from portal(ep7) ,for the BEx Web Analyzer getting the error message as shown below.but the other two i.e. planning wizard and planning modeller are running fine.is there is some problem while configuring or while deploying files on the portal server..please help me in this case.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Could not find portal application com.sap.ip.bi.km.base.
    Exception id: 10:32_28/02/08_0069_19249950
    See the details for the exception ID in the log file

    Hi Rohini,
    Let me know, have you got the right authorization to do this transaction. Check your profile, if you are using for a long while, check whether you have changed any user settings.
    Good luck
    Om
    Reward it, if u feel helpful.

  • Error Message while opening workbook or Query in BEx Analyzer

    Hi all,
    Whenever I try to open any workbook or query using Bex Analyzer I get an error message saying "Serious error occured while reading history folder" Message class RSOBJS, number 170. But this doesnt stop me from opening the workbook or the query.
    Kindly help me to suppress or eliminate this message. I am not able to find this message in the list of messages available in RSRT either.
    Thanks and Regards
    Mui Kanva

    Hi Mui Kanva,
    Does your problem occur in a copied system?
    I have same problem in our Quality-BW (copied from productive system). WE are in our QBW not able to activate personalization correct and get the same error messages. I suggest the reason in the fact, that the source-system Myself (QBW) does not work correct. This reason causes that export data sources could not be activated via RFC-Connection.
    Please check to activate your source system?
    We accept the error messages in our QBW and did not activate the RFC connection.
    Regards
    Andreas

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • Tried to instal an auto update this morning and I got an error message

    I got the usual auto update message this mortning, so I clicked install!
    Now all I get is the error messages.... Program:C\program File(x86)iTunes\iTuneshelper.exe
                                                           Error 6034
    Then I get another popped up stating. Windoes error 7
                                                           Windows error 1114
    I deleted iTunes and started to reinstall :-(
    Half way through I get an error message saying something about unable to instigate Mobile device (or simnilar)
    Eventually, after clicking twice to retry and getting the same message, I clicked ignore???
    Now each time I try to open iTunes I get the two messages reappear in quick succession???
    I tried to 'ring' support... what a flippin' joke?
    Even though it related to me PC I was asked to imput my device serial No.???
    I did so, went through their process to call... and eventuall got told (by message), that they couldn't help me????????
    I went through the same process.... 'Welcome back' the message said.... still the same outcome????
    Why can't I call to speak to some-one???????
    Help me some-one.... PLEASE!!!!

    Hello, trevor@infinity. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Error message during BEx analyzer execute

    Using BEx analyzer, system show error message like below:
    Variable 0P_FVAEX could not be replaced;
    Program error in class SAPMSSY1 mehtod: UNCAUGHT_EXCEPTION
    System error in program CL_RSR_REQUEST and form TEXT_ELEMENTS_GET:VARIABLES_SUBMIT(see long text)
    Who can solve this problem? Thanks!
    Message was edited by:
            Almini Sanbra

    Dear sanbra,
    We have faced the same error and its resolved after applying the
    Following:
    I have applied the following Note
    1079186 Error when you filter by characteristic values
    Please also apply the following patches to your system:
    Support packages and patches ->SAP netweaver->SAP Netweaver->
    SAP Net weaver 2004s->Entry by component->BI java
    Update with the latest patches
    1)BIBASES12P_4-10003477.SCA Patch for for BI BASE SERVICES 7.00  SP12  4
    2)BIWEBAPP12P_4-10003476.SCA Patch for BI WEB APPLICATIONS 7.00 SP12  4
    3)BIIBC12_0-10003495.SCA SP for BI INFORM. BROADCASTING 7.00  0
    Regards,
    Suman Raju.
    ***********IF useful some points please***********

  • Error message "auto duplexer is not installed" after a paper jam was removed on my epson artisan 837.

    I print from a Macbook Pro (April '09) OSX 10.9.3 to an Epson Artisan 837 duplex all-in-one which has been functioning perfectly for some time. The other day while duplex printing I got a vague error message to the effect "printer error, turn off machine and power back on." I repeated that process several times waiting a period of time and/or doing it speedily. I even unplugged the printer from its outlet, turned off the computer, waited overnight and tried again, all to no avail. I then found the back tray had a paper jam which I removed and replaced the tray.  Since this ordeal I have NOT been able to use the duplex function. After apple's air-print, an Epson Customer Service person told me to add a printer in Systems, printer preferences and to simply add in the same printer (only one i have) but choose not to have it be air-print. This worked even though it gave me Epson Artisan 837 and Epson Artisan 837II (the first with air-print the second not). I must be missing some step this time, however, because although I now have essentially 2 printer choices, the Epson II has duplex printing choices grayed out and gives me the error message "auto duplexer is not installed." Sorry to make this so long, but can anyone help me with this problem?

    Thank you. Those are beautifully written procedures.
    Looks like it's a network issue. I reach the step, "Adding a printer using the wizard":
    You must enter the following URL, you must use the Queue Name you noted down earlier
    http://<IP address of Mac>:631/printers/Queue Name
    which I do, entering
    http://192.168.0.4:631/printers/MP830
    and I get the following error:
    "Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server."
    And then I am toast!
    Using the other procedure, I simply don't see the Mac's printers in the Bonjour Wizard's "Browse for Bonjour Printers" window.
    Not sure where to go from here -- any ideas?
    The Mac's IP (set via DHCP) is 192.168.0.4, subnet mask 255.255.255.0. The PC is 192.168.0.5, I can't find the subnet mask.
    Pretty sure it's a network config issue, especially isnce I can Bonjour to my other Mac.
    TIA...

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for