"Auto-Analyzer has skipped one or more file(s) because of potential errors"

Because of size of my photo library (>5k pics) I decided to switched of automatic auto-analyzer.
But when I use Auto-Analyzer from context menu on a single photo I always get message "Auto-Analyzer has skipped one or more file(s) because of potential errors". Why?
PSE 9 Organizer

I have the same problem with just one of 6000 images in my library. It is a straigthforward jpg. The image is not corrupt and the thumbnail is produced just fine. PSE can edit the image perfectly.
Dimenionally it was quite large so I produced scaled down 1920-wide image but that too will not be analysed.
It is quite an unusual image taken at dawn on the top of a mountain in Bali with lots of mist. I don't know, I think maybe the auto analyzer might sometimes fail to reach a conclusion about the tags to apply. kondzik, is your image "unusual" in anyway?

Similar Messages

  • Adobe acrobat has recovered one or more documents that were not saved properly

    Hello,
    I am getting the following error and cant seem to fins anything about it anywhere
    "Adobe acrobat has recovered one or more documents that were not saved properly before Acrobat was shut down click yes to open the recovered document click no your changes will be lost. "
    This comes up numerous times a day.  Does anyone have any idea to what it might be related to?  Some seting?  Looking for a direction to troubleshoot.
    Running Acrobat X standard, fully updated, Windows 7.

    Same problem.
    Clicking yes or no does not stop the pop up to come over and over again.
    Copied the file "unsaved", renamed it and deleted the "unsaved" one.
    No success, pop up with message Adobe acrobat has recovered one or more documents that were not saved properly continues
    It is very disturbing when working with tough deadlines
    Using Acrobat Pro 9.5.5 (updated)
    Please help

  • One or more files in the Adobe Application Support folder...

    Upon opening Photoshop CS5 I have the following message displayed on the screen. I have uninstalled and re-installed Photoshop but it did not make a difference., the message keeps showing up. It is getting annoying and I have no idea which files are missing. Anyone know how to fix this? I am copying the message here:
    One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing.  Please run the Photoshop installer and re-install Photoshop.

    It's not a systemic problem, no.  Photoshop CS5 can certainly run without an error message.
    Was it working without the error message on your system at one time?
    Have you made any changes to the files supplied as part of Photoshop?
    An uninstall (possibly via the Creative Suite Cleaner Tool) followed by a reinstall will probably get you working again.
    -Noel

  • Uninstalled Old PS Versions - Now Get "One Or More File. . .etc" Error Message When Launching PS CC

    I just unistalled PS C3 through 6 on my computer leaving only PS CC for use going forward.  Having done this I now get this error message when launching PS CC:  "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing.  Please run the Photoshop installer and re-install Photoshop."  The thing is PS CC still appears to be working okay once that error message is cleared.  How can I get rid of that error message?  I can't reinstall using the CC Updater because it still sees PS CC on the system thus it won't install another copy.  I'd just as soon not uninstall it and I'm not sure that would fix the issue anyway.
    Any ideas?

    Hi jpolster,
    You can uninstall PS CC through the Control Panel in windows/Utilities in MAC & the reinstall PS CC.
    Thanks

  • Elements auto analyzer has malfunctioned and needs to close

    Every day I get messages saying Elements auto analyzer has malfunctioned and needs to close. APE9 is not even open. Howw can I stop this?

    When you go to the Organizer's Edit/Preferences/Auto Analyzer, is it set to run automatically? If so, does this problem persist if you turn it off?

  • One or more files...missing

    I have re-installed my OS (Tiger). Upon launching Photoshop the first time (CS2) I had to re-authorize, ok, no problem (I hope). Then the window appears: One or more files in the Adobe Application Support folder, necessary to running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop. Then the program continues launching, presumably with some function(s) crippled.
    My question: can I simply copy the Adobe Application Support folder onto my hard drive from the SuperDuper backup that I made before re-installing the OS? Will this satisfy the requirement? Sounds simpler than re-installing Photoshop, then probably having to re-authorize, etc.
    Thanks for any thoughts.

    >
    "can I simply copy the Adobe Application Support folder onto my hard drive from the SuperDuper backup that I made before re-installing the OS?"
    Try it (copy the
    CONTENTS
    of the folder over. Don't make a second folder in your
    .../Library/... folder). Can't hurt. If it doesn't work, just remove the files you copied over and try something else.
    Make notes about what goes where, if you have to. Make a backup copy of items you're mucking about with, if you're unsure of anything. Just make sure you create enough clues for yourself so you can return your system and particularly the App Support folder back to the way it was before you started experimenting.

  • Error Uploading Files - One or more files could not be uploaded

    Hi, I used Adobe SendNow without any problems for years.  Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files.  Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again.  If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files.  I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

    Hi,
    Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
    If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
    (The other way to upload files is to simply drag and drop them.)  If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
    Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
    You should now see the folder you just created. Open it up, and select the files you want to send.
    If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

  • Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

    Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

    Please Run the Cleaner tool to remove Ps CC 2014 :http://www.adobe.com/support/contact/cscleanertool.html .
    Restart your system and then try installing Ps CC 2014 again.
    Regards,
    Ashutosh

  • When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

    When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • Help : installer has detected one or more adobe coldfusion builder plugins

    I uninstalled coldfusion builder from flash builder and then when re-install I get a  message:
    installer has detected one or more adobe coldfusion builder plugins  ....etc
    How do I fix this?

    As a caution to save your time please follow the following release note:
    82284 -   If you install ColdFusion Builder as a plug-in to Flash Builder and decide to uninstall ColdFusion Builder, make sure ColdFusion perspective is not active in Flash Builder. Failing which, some features may not work after restarting Flash Builder or ColdFusion Builder's perspective will not come up if installed again.
    I did the wrong thing here and I can't ever get coldfusion to reappear after unstalling into FB

  • Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

    Hi!
    We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
    manage mobile devices with Intune.
    Error message on Intune Portal:
    "Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
    Repeated: 19 times.
    Class: (System) Policy
    Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
    2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
    That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
    Br.
    Jukka

    Hi Jukka,
    Mobile policy doesn't apply to clients using the Full Client download.  Please open a support case so the team can assist in further troubleshooting.
    Thanks,
    Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

  • My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    I have not seen a solution for error (1)
    make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Error message: There is a problem accessing one or more files in your iPhoto library. Do you want iPhoto to repair permissions for this library for you?

    I have been using iPhoto for years.  Today when I tried to upload pictures from camera, I received the above error message.  I select "Repair", enter my password, and then a message "iPhoto was unable to repair permissions for the library" appears. I select "Quit" and it closes iPhoto.  Quit is the only option.  What has happened?  I have tried to access the photos via other avenues such as uploading to gmail, and the photos load fine.  I have about 28,000 photos.
    I do not know what version of iPhoto I am using as I am unable to access the software.  I have a iMac OS X (10.7.5).  What should I do?

    Select the iPhoto application in the Applications folder and type Command+i to bring up its Info Window. There will tell the version number. If it's iPhoto 9 or later apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • How to find if the user has selected one or many files using a file chooser

    I have a file chooser but want it to return either a file or file array depending on whether more than one file is selected but there doesn't seem to be any way to find out if that is the case or not. I want it to look something like:
                if(fileChooser.getSelectedFile().isDirectory()==true)
                    selectedFile=fileChooser.getCurrentDirectory();
                else if(fileChooser.multipleFilesSelected())
                    fileChooser.getSelectedFiles();//we have more than one file selected
                else   
                    fileChooser.getSelectedFile();    //if we have one file selected
                }am I going about dealing with this in the right way?

    OK, I scoured the API again and found I could avoid the problem altogether by using
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JFileChooser.html#isMultiSelectionEnabled()
    and
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JFileChooser.html#setFileSelectionMode(int)

  • Open one than more file from Lightroom to photoshop at the same time

    Hi,
    i'm a PS Elements-User and i have a question. Is it possible to open more than 1 file from lightroom into photoshop with one click? Thank you in advance for helping me.
    SH

    I use PSE9 and send several derivate files (TIFFs) from LR to PSE9 all the time to do panos.
    I've recorded a little screen capture showing 4 images being sent to PSE9 from LR3.6. You can see the 4 tiffs being added to the catalog before calling PSE9 and then the 4 TIFFs arrive in PSE9.
    What Operating System do you use? Can you show a screenshot of the external editor settings for PSE?
    Beat

Maybe you are looking for

  • Where current of

    Hi Please explain me about WHERE CURRENT OF clause. Also please let me know about why WHERE CURRENT OF NO UPDATE is used. Thanks in advance Manju

  • Import tags from another catalogue without develop settings

    How do I import tags from another catalogue but not the develop settings of each image? Here's whats going on: I started with 5000 images on a hard drive. I gave a copy to someone else working on the project. I physically moved images into real folde

  • How to I keep Firefox installed, after shutting down or restarting computer?

    After a successful install, I use Firefox, all is great. Problem is, when I shut down, or restart computer, all shortcuts, start menu Firefox, etc. no longer work, and icons are all windows icons, and all the shortcuts, etc. say files had been moved.

  • AAA authentication on switch

    We are configuring 802.1x for wired client. ISE is our AAA server. While configuring, i came across 3 different command sets 1) radius-server host  <primary aaa server> auth-port 1812 acct-port 1813      radius-server host  <secondary aaa server> aut

  • Preserving customization during upgrade

    Hi, Are there any special steps which need to be done to preserver the customization during upgrade. Thanks, Taher