Auto analyzer in 12 never finishes help

I am trying to work through classroom in a book for premiere elements 12 and auto analyzer never finishes so I can not continue can anyone give me some advise?

Hello ATR
THAT was a quick reply! Thank you so much!
> Have you tried creating a new catalog?
No, that I haven't tried - yet! But I will give it a chance.
> Another problem that I have noted recently is the Elements Organizer 12 Slideshow Editor shutting down when a .mp3 file is added to the
slideshow.
Thanks for the warning. So far I haven't added music/mp3-files.
> What does your computer have at this time for available RAM and free hard drive space?
RAM available = 3,42 GB
Free hard drive space = 66,4 GB
> I tried to find your prior thread that you said that you created here...
Oh, I didn't want to indicate that I had earlier created at thread. However I mentioned problems "I already find described in this forum and elsewhere". With this I mean that I have read other peoples threads and the advice that they were given. The phrase 'never ending' don't occur in my message above :-)
I expect that the coming days will be busy, preventing me from playing/experimenting with Premiere. But as soon as possible I will create a new catalog for a start.
Best regards

Similar Messages

SL Server and Time Machine - Backups never finish - help.

I am running Snow Leopard Server (10.6.4) on a Mini. I want to use Time Machine to back it up to an external hard drive. This setup worked forever, until I upgraded to Snow Leopard.
Now, the backups start, but never finish. There is no consistency to this - sometimes it gets far into the backup, and other times if stops early. In other words, there is not one file that is causing this problem. The only consistent thing is, is never finishes.
I’ve tried to use an old sparsebundle, and I’ve erased the HD completely to start over. I’ve excluded files, folders, and groups of folders, and it never completes.
The alert I get usually says, “The backup was not performed because an error occurred while copying files to the backup disk. The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk.”
Needless to say, I’ve followed these instructions - waited (six months now), used a Time Capsule instead, used another HD instead, repaired the HD, everything. It just doesn’t work.
Anyone else have this problem? Any ideas on how to fix it?
Thanks.

I'm having the same problem. I can't use Time Machine at all on Snow Leopard Server on an Xserve. There are 2 1TB drives configured as a mirrored RAID set, and a 3rd internal 1TB drive set up to run as a Time Machine backup drive. I have not had any luck after almost a year of trying to get this to work, and I am finding no help on the Internet. I've seen the question asked, but it is never answered. Does ANYBODY out there have an clues as to why this keeps happening? Is it about permissions, since these files are being served from the sharepoint? If I exclude everything but one or two files, the process works, so it's not a hardware error, as far as I can tell. Can't I get TM to bypass any problem files and log them to a report? There are thousands of files. I can't exclude them one by one. I'm already very old.

Auto analyze is insane

I imported two AVCHD clips in 8 and am trying to trim them. However the application goes into auto analyze mode and it takes forever for the application to do so. These clips have been already rendered.
I tried turning it off as listed here http://help.adobe.com/en_US/PremiereElements/8.0/Win/Using/WS76FAEC13-BEA1-47d8-8F38-B6A38 D9C0E63.html however I don't see the auto analyzer menu option listed on help page.
I am still trying out Premiere 8 and so far have not been impressed. Sony Vegas is way more responsive and not as clunky as Premiere 8.
What happened to 80-20 rule in designing software applications!

It messed up my video. It didn't ANALYZE - it did things without my permission.
How can you undo the damage it did to a video?

IPhone5 and iPad3(iTunes 11.1.2) after syncing never finish syncing continuo stay in finishing syncing need help.

iPhone5 and iPad3(iTunes 11.1.2) after syncing never finish syncing continuo stay in finishing syncing need help.

Same issue here iTunes stuck on "Finishing Sync"
Tried to leave it for 10 hours without any changes "Finishing Sync" still shows in iTunes
The Setup:
itunes 11.1.2.32 - install on Windows 7 Enterprise 32bit - Service Pack 1 + all updates from windows update
iPhone 4S - running IOS 7.03(11B511)
Additional information
During the update to from IOS 7.02 to 7.03 the update process stopped and asked to restore the iPhone
The restore deleted all data on my phone. Yes restore means delete all data including your photos.
My backup did not work so now running IOS 7.03 with the "Finishing Sync" issue on iTunes
Please let me know how to solve this issue

Gathering Infomation on Opening Welcome Sceen never finishes. Please Help

On my Photoshop Elements 9 Welcome page the "gathering Infomation" thing never finishes. I can I correct this? Some one answered this question in the past but I can't find the answer in these forums and don't remember what they told me to do.
Anyone who can help please respond. Thank you all in advance.
Kampers_

The solution is to stop using the welcome screen. Go into the program files (program files (x86) for windows 64 bit systems)/applications folder and find the actual .exe/application file for the editor and/or the organizer, then make a shortcut/dock icon and use that instead in the future.

HT1373 I have a new Ipad with retina display but two issues with itunes 1) I can not syncronize films&music with the library on my mac and 2) When I download music or films from itunes to my ipad from itunes store the download never finishes. Any help??

I have a two problems with my new Ipad 2 operating system iOS 6.1.3
1) I can not syncronize with my itunes purchaces that I have on my mac book pro (operating system mountain lion)
2) When i purchase items from itunes store the downloads never finishes
I have tried starting and re-starting. Resetting the Ipad to original settings and non of this have worked. Any idea to what I should do?
Thanks a lot, Josephine

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

When trying to download a rented movie directly from iTunes onto iPad it NEVER finishes downloading. It constantly starts over. HELP

When I try to download a rented movie directly from ipad it never finishes downloading. It starts and gets close and then starts over again. HELP

Two possible reasons:
1. Not enough space
2. Slow internet

Auto Analyzer in Premier Elements 11

I've never before owned or used any video software. I just purchased and installed Premier Elements 11.
I searched for "Updates", which the program found. After starting to download, I received an error dialog to the effect of: -- cannot proceed; must first uninstall "Elements Auto Analyzer".
What the heck was that, I thought. I had no idea, but I am familiar with the Windows boot procedure, so I went to "msconfig>Startup", and sure enough, I found "Elements Auto Analyzer". I unchecked it, closed msconfig, and rebooted the computer. Now that "Elements Auto Analyzer" was not running, the update to Premier Elements 11 downloaded and installed without a problem.
Ok, I am familiar with Windows’ "msconfig"; but what about others? How do most people update Premier Elements 11? So I rooted around as I was exploring this brand-new-to-me program. I stumbled upon "Organizer>Media Analysis>Run Analyzer on System Startup", and its associated checkbox.
So I ask, what is this Media Analysis tool? Should I leave the box checked, knowing that it then loads this Auto Analyzer tool upon every system startup? Or should I uncheck the box so that the Auto Analyzer does not automatically load.
If helpful, know that I purchased Premier Elements 11 for the purpose of capturing, editing and burning DVDs from video on my old VHS tapes.
Thank you for your assistance,
Howard

As I use a similar program, Adobe Bridge (with Premiere Pro, Photoshop, InDesign, etc.), I am only speculating a bit here.
I would run Auto Analyzer one time (might take a bit, depending on the number of Images and Videos on one's system and the speed of the computer), to establish the Albums (or whatever they are called in Organizer), and then turn it OFF, so it does not fire up, whenever an Image, or Video is added to the system, then run it once more, manually, before using Organizer with PrE. I do not like having a lot of programs running in the background, especially if the are likely to pop up and begin cataloging, whenever I make a simple change, like Coping over some Video files from a flash card. I want complete control.
Now, Steve, who is the guru, on all things PrE, might have different advice, so go with his, over mine, any day.
Happy editing,
Hunt

Job that never finishes in the Batch Apps Service?

We have a job that never finishes, the single task that it runs says it's finished but the job never ends. I end up having to cancel it.
The task that runs takes about 33 minutes or so to complete. Could whatever that monitors the job timeout waiting for the task to finish?
here's the log that we see for the job
2/25/2015 7:51:55 AM - (1) Completed task processing.
2/25/2015 7:51:54 AM - (1) Finished uploading outputs to blob storage.
2/25/2015 7:51:54 AM - (1) Uploading outputs to blob storage.
2/25/2015 7:51:54 AM - (1) Task output 0 files
2/25/2015 7:51:54 AM - (1) Completed external process.
2/25/2015 7:19:18 AM - (1) Starting external process.
2/25/2015 7:19:18 AM - (1) Completed assets download.
2/25/2015 7:19:18 AM - (1) Downloading assets to local storage.
2/25/2015 7:19:12 AM - (1) Starting task processing.
2/25/2015 7:18:31 AM - (Job) Job splitter finished
2/25/2015 7:18:23 AM - (Job) Job splitter started
2/25/2015 7:18:12 AM - (Job) The job orchestrator started
2/25/2015 7:13:05 AM - (Job) Using auto pool C14F1D31-BE60-4D02-9003-C05021B3C470
2/25/2015 7:13:05 AM - (Job) Requesting Azure compute resources - this may take several minutes
2/25/2015 7:13:03 AM - (Job) Job queued for processing
2/25/2015 7:13:01 AM - (Job) Job request received

Unfortunately, posting our code here really isn't possible.
I can describe what we're doing and seeing.
We're not using the batch service to run command line applications. In our task processor, we're determining what classes to create and call and call them in process. We have a lot of job types (above 15 and counting) that we need to run, so we opted
to combine them into a single class library and call them that way. None of our jobs output any files, all of our output get persisted to blob storage. We're using the batch service kind of as an on-demand cloud worker infrastructure.
It seems like the issue (jobs that never end) are random. It's not always the same job and it's not always long running ones. When the issue does crop up, our task completes without any errors. We do see the results of our jobs in blob storage.
Also in our task processor, we set the TaskProcessResult's ProcessorOutput property to any messages we've logged. We can download and see those log messages in the portal.
We also see 2 tasks created for the job, our task and the default merge (we don't create merge tasks for our jobs).
Would the job id's or logs help in any way?

Re-Merge Bogus Scene Groups Created by Auto-Analyzer

Posted originally at Photoshop Elements forum because I didn't see a separate forum for the Organizer. Someone there suggested I repost here.
So I've now read the postings about disabling the automatic running of the deadly Auto-Analyzer feature--48 hours too late. I'm hoping against hope that Adobe now has some fix to re-merge the bogus scene groups created by this "feature" without re-importing the master clips silently assaulted throughout my 80 hour video library. I've spent days tagging clips only to notice this evening that a growing number had been carved up into meaningless "scenes". The child scenes seem to carry the tags and date attributes of the master clip at the time of the "analysis", but for clips not yet fully tagged, care must be taken to fully expand the groups before tagging, and the proliferation of meaningless groups with hanging one second "scenes" is not the standard I'd hoped to maintain in this catalog.
Please, someone tell me it is now possible to undo the mess of Scene Groups created by Auto-Analyzer without reimporting and retagging clips.
Also, although I've now disabled background running of Auto-Analyser, how do I remove it from the menus and, goodness gracious, from any keyboard shortcut that might inadvertantly run it? I want it to go away forever and never come back.
Thanks!
-Whit

Thanks, Steve. It is clean in the sense that there is no data loss and that when editing in Premier I can take the extra step of untrimming such clips. Even if working in Premier, I still think it would be much cleaner if one could simply undo all of this from the Organizer and not have to worry about it when creating a new project. My main issue is that I'm really trying to use the Organizer itself as a bit of a friendly front-end to enable my family to peruse a decades-long video library, and all these meangingless scene groups would have really confused my novice users.
I'm good now. Had not gotten too far in tagging so I set the defaults to not run Auto-Analyzer and started over. Was considerably faster this go-around because I used DVMP Pro to change the modified date of each clip to reflect the timecode value for the first frame -- so this time everything but the really old analog 8 mm stuff came in with clean, detailed dates.
Thanks again for your help, Steve.
-Whit

If you disabled the PSE 12 Auto Analyzer

For those who disabled the PSE 12 Auto Analyzer by putting a space into its name, be sure to go back and take the space out before running the 12.1. update. The update resets the auto analyzer to its original state, so you will need to go back and redo everything if you want to prevent it from running all the time after the update. I never had the Windows version set problem, so I don't know the update fixes that or not, sorry. Maybe someone who had it can post about whether or not it's still a problem in PSE 12.1.

Barbara B. wrote:
For those who disabled the PSE 12 Auto Analyzer by putting a space into its name, be sure to go back and take the space out before running the 12.1. update. The update resets the auto analyzer to its original state, so you will need to go back and redo everything if you want to prevent it from running all the time after the update. I never had the Windows version set problem, so I don't know the update fixes that or not, sorry. Maybe someone who had it can post about whether or not it's still a problem in PSE 12.1.
Not for me (Windows 7).
I did not change anything for the renamed exe.
As the update seemed to be ineffective in the editor help menu, I started the update from the organizer. Once the update process started, I closed the editor and organizer, which I thought would speed up the process. Everything went well. The new ElementsAutoAnalyzer was updated in the the 'Roaming' subfolder. The old renamed one, was still there. No sign of the process visible in the task manager. Closed Elements, still no background process. Restarted the computer and the organizer : no background process...
I could not replicate the version set problem since the workaround; same since the update.

ColdFusion with IIS URL Rewrite - Page never finishes loading

I am running CF10 on IIS 7.5 with URL Rewrite module installed.
All the rewrite rules work perfectly and ColdFusion is returning the correct pages. In order to get the page displayed in the browser I have to manually set the 'content-length' value in Application.cfc like this:
<cfcomponent>
<cffunction name="onRequestEnd">
<cfheader name="Content-Length" value="#getPageContext().getCFOutput().getBuffer().size()#" />
</cffunction>
</cfcomponent>
Without this code the browser does not display the page. However, even though it is now displaying the page, it is not doing it correctly. The page never finishes loading fully and not all of the HTML content seems to be on the page.
I have tried to add a <cfflush> tag after setting the 'content-length' but it makes no difference. I don't understand why this is happening but I know that it has happened to someone else who was using htaccess: http://forums.devshed.com/coldfusion-development-84/page-not-finishing-loading-coldfusion- and-htaccess-bug-575906.html
Can anyone please help?

Hi guys,
I would like to do url rewriting on our CF app but am worried I'll break something if I try and do it myself - is there anyone who would be interested in a bit of consultancy to help us achieve this?
I want to turn http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
into http://www.allchichesterjobs.com/part-time-jobs
I've tried this using IIS and URL Rewrite, when I browsed to http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
my browser was redirected to http://www.allchichesterjobs.com/part-time-jobs ok - but then I got a 404 error
I'm wondering if I can pay someone to remote view my screen while we talk on skype and tell me what to do?
Hope it's ok to post this sort of request on here
Thanks very much indeed.
Nick

Auto-analyzer crashes in Premiere Elements 12

I'm loading a number of home videos to my computer. I've imported a bunch of DV tapes that were recorded direclty on DV successfully; now I'm importing DV tapes that were originally recorded on 8mm tapes, and were transferred to DV tapes. As a result, there is no timecode on the tapes to identify scene changes.
So I'm importing them in the "Expert" mode and have selected to split scenes by content. It appears that this is done using the Auto-Analyzer. However, the auto-analyzer never completes its process, it always crashes on these tapes (I'm now 4 crashes on 4 tapes). The video (one hours' worth) is imported to the computer successfully, but only as one long scene; I don't get any split scenes.
Any ideas on how to get auto-analyzer to complete successfully, or another way to get split scenes? System is running Win7, 8GB RAM.
Thanks in advance.

jevernham
Thanks for the follow up.
Trimming clips in the Premiere Elements Preview Window with its Set In and Set Out points is not an automatic process. So, you do not want it.
And, the AutoAnalyzer feature is not able to detect scenes in your footage. So where does that leave us?
No scenes detected....
1, Have you tried capturing your footage into a program such as Windows Live Movie Maker/Movie Maker or other capturing program to determine if any program can detect and split the scenes in your videos on a consistent basis?
2. Have you disabled the AutoAnalzyer options in Elements Organizer preferences and then done your DV Capture?
See Elements Organizer workspace/Edit Menu/Preferences/MediaAnalysis.
3. Have you completed your DV Capture without Split Scenes and AutoAnalzyer disabled, taken your capture into Project Assets, clicked on Run AutoAnalyzer, and gotten scene detection and scene splitting?
General Comments
I do not believe that the AutoAnalzyer was ever intended as a video splitting tool, rather a "Smart Tagger" and might split video clips in the process. Today it is a last resort for those who seek it to split video into scenes according to content AFTER capture/import. Please check out one explanation of the AutoAnalzyer and what it is supposed to be doing.
http://forums.adobe.com/message/4551932
In much earlier versions of Premiere Elements, the Premiere Elements Capture Window had a Split Scenes by Timecode or Content option and an AutoAnalzyer option. Most recommended that the AutoAnalzyer option not be used in that case because of numerous problems associated with it use there. So, based on that, I am not sure how the program is programmed to differientiate between Split Scenes by Content and AutoAnalzyer's side effect of trying to split video clips into scenes by content.
I work with the AutoAnalyzer disable in the Elements Organizer preferences. And, you the feature on an "on demand" basis when needed. I do not do any DV or HDV firewire captures. If I leave the AutoAnalzyer enabled in Elements Organizer preferences, I find my video split into clip and stacked. I do not want that.
I have not explored capture utilities first hand so I cannot speak to that other than if I did a Google search.
Please review the above, and please update us on your progress.
Thank you.
ATR

R6034 and Auto-Analyzer problems in Photoshop Elements 9.0

When I start the organizer of Photoshop Elements 9.0 I get an error that says:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program File...
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information
Sometimes clicking okay to this message allows me into the program and sometimes it crashes PE9.
The auto-analyzer is also not working. When I select an image and choose "Run Auto-Analyzer" it says starting auto-analyzer and then eventually it fails saying it cannot analyze the file.
I have tried several things on the advice of technical support without it helping
Reinstalling the application
Reinstalling the visual c++ redistributables 2005, 2008, and 2010.
Troubleshoot catalog issues
Manually remove Photoshop Elements 9 | Windows
I have also created a new user and tried running the program from a new user.
Nothing has solved the problem. My library is about 10 thousand photos in about 25 gigs of space.
Any advice?
All the advice I found online about R6034 seems to be bogus help pages filled with spyware, so I'm hoping that someone can help me out.

ThIs forum is targeted to PSE.
Please post your picture for guidance. You can post it here, or use www.pixentral.com. For the latter, post the URL in this thread so that we may open it.

Elements 9 Auto-Analyze Causes Crash

I'm trying a trial version of Photoshop Elements 9. I've discovered that whenever it tries to do the auto-analyze function, the software crashes. I had to disable the "Analyze Photos for People Automically" to keep the software from crashing after startup. But still, it defeats the purpose of being able to do facial recognition which is the main reason why I want to upgrade from Elements 6 to 9. It crashes even if I try to analyze ONE picture.
I've read other posts but couldn't find any solutions. Is there a fix for this? Without the facial recognition, there's not much point in upgrading. In fact it forces me to look at other alternatives such as Google Picassa which does facial recognization just fine on my computer. But I'd prefer to stick with Elements if possible.
Any help would be appreciated.
I'm using Windows XP SP3 fully patched. Photoshop Elements 9 is fully up to date. My 256MB Geforce 6200 video card has the latest drivers installed. I've got 17 GB of free space on my hard drive and 1.5 GB of RAM.
Elements Organizer 9.0.0.0
Core Version: 9.0 (20100929.m.9165)
Language Version: 9.0 (20100929.m.9165)
Current Catalog:
Catalog Size: 28.8MB
Catalog Cache Size: 175.2MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: AMD CPU Family:6 Model:10 Stepping:0 with MMX, SSE Integer, SSE FP
Built-in Memory: 1.5GB
Free Memory: 751.3MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.69
Adobe Reader Version: Not installed
Adobe Acrobat Version: Not installed

Thank you for your response.
I did have everything unchecked in the Media Analysis preferences. It would still crash whenever I manually ran the Auto-Analyzer from the context menu or the "Start People Recognition" button.
I went ahead and checked just the "Face" option but the results are the same. When I click the "Start People Recognition" button, it brings up a box that says "Analyzing Your Media", it pauses for several seconds and then it crashes.
Any other suggestions? Do you know if this a software issue or a hardware issue?

Auto analyzer in 12 never finishes help

Similar Messages

Maybe you are looking for