Auto analyzer performance improvements in version 9

Has anyone run performance tests on a manual execution of version 8 of the auto-analyzer and compared this with version 9?
I'm runing PrE and Organizer version 8 and am actually quite happy with it. I have many hours of video and thousands of photos which have been 'organized'. I'm taking advantage now of the manual execution of the auto-analyzer feature for my videos. I'm now a week into this running my computer 24x7 and figure I have another two weeks or so to go before auto-analyzer is done executing. I currently have M2T (1440x1050 60i) and DV-AVI flavored clips.

In my experience, everything about version 9 runs more efficiently than it did in version 8.
When I had version 8, I couldn't even run the Auto Analyzer in the background because it would stall my computer. In version 9, I can leave the Organizer to run the Auto Analyzer (aka Media Analyzer) in the background and it doesn't interfere with my work whatsoever.

Similar Messages

Performance issues with version enable partitioned tables?

Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
     Object Name     Rows     Bytes     Cost     Object Node     In/Out     PStart     PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE          1          249
UPDATE     SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI          1     266     249
PARTITION RANGE ALL                                   1     9
TABLE ACCESS FULL     SIG.SIG_QUA_IMG_LT     1     259     2               1     9
VIEW     SYS.VW_NSO_1     1     7     247
NESTED LOOPS          1     739     247
NESTED LOOPS          1     677     247
NESTED LOOPS          1     412     246
NESTED LOOPS          1     114     244
INDEX RANGE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62     2
INDEX RANGE SCAN     SIG.QIM_PK     1     52     243
TABLE ACCESS BY GLOBAL INDEX ROWID     SIG.SIG_QUA_IMG_LT     1     298     2               ROWID     ROW L
INDEX RANGE SCAN     SIG.SIG_QUA_IMG_PKI$     1          1
INDEX RANGE SCAN     WMSYS.WM$NEXTVER_TABLE_NV_INDX     1     265     1
INDEX UNIQUE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))

Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben

Auto-analyzer crashes in Premiere Elements 12

I'm loading a number of home videos to my computer. I've imported a bunch of DV tapes that were recorded direclty on DV successfully; now I'm importing DV tapes that were originally recorded on 8mm tapes, and were transferred to DV tapes. As a result, there is no timecode on the tapes to identify scene changes.
So I'm importing them in the "Expert" mode and have selected to split scenes by content. It appears that this is done using the Auto-Analyzer. However, the auto-analyzer never completes its process, it always crashes on these tapes (I'm now 4 crashes on 4 tapes). The video (one hours' worth) is imported to the computer successfully, but only as one long scene; I don't get any split scenes.
Any ideas on how to get auto-analyzer to complete successfully, or another way to get split scenes? System is running Win7, 8GB RAM.
Thanks in advance.

jevernham
Thanks for the follow up.
Trimming clips in the Premiere Elements Preview Window with its Set In and Set Out points is not an automatic process. So, you do not want it.
And, the AutoAnalyzer feature is not able to detect scenes in your footage. So where does that leave us?
No scenes detected....
1, Have you tried capturing your footage into a program such as Windows Live Movie Maker/Movie Maker or other capturing program to determine if any program can detect and split the scenes in your videos on a consistent basis?
2. Have you disabled the AutoAnalzyer options in Elements Organizer preferences and then done your DV Capture?
See Elements Organizer workspace/Edit Menu/Preferences/MediaAnalysis.
3. Have you completed your DV Capture without Split Scenes and AutoAnalzyer disabled, taken your capture into Project Assets, clicked on Run AutoAnalyzer, and gotten scene detection and scene splitting?
General Comments
I do not believe that the AutoAnalzyer was ever intended as a video splitting tool, rather a "Smart Tagger" and might split video clips in the process. Today it is a last resort for those who seek it to split video into scenes according to content AFTER capture/import. Please check out one explanation of the AutoAnalzyer and what it is supposed to be doing.
http://forums.adobe.com/message/4551932
In much earlier versions of Premiere Elements, the Premiere Elements Capture Window had a Split Scenes by Timecode or Content option and an AutoAnalzyer option. Most recommended that the AutoAnalzyer option not be used in that case because of numerous problems associated with it use there. So, based on that, I am not sure how the program is programmed to differientiate between Split Scenes by Content and AutoAnalzyer's side effect of trying to split video clips into scenes by content.
I work with the AutoAnalyzer disable in the Elements Organizer preferences. And, you the feature on an "on demand" basis when needed. I do not do any DV or HDV firewire captures. If I leave the AutoAnalzyer enabled in Elements Organizer preferences, I find my video split into clip and stacked. I do not want that.
I have not explored capture utilities first hand so I cannot speak to that other than if I did a Google search.
Please review the above, and please update us on your progress.
Thank you.
ATR

Elements 9 Auto-Analyze Causes Crash

I'm trying a trial version of Photoshop Elements 9. I've discovered that whenever it tries to do the auto-analyze function, the software crashes. I had to disable the "Analyze Photos for People Automically" to keep the software from crashing after startup. But still, it defeats the purpose of being able to do facial recognition which is the main reason why I want to upgrade from Elements 6 to 9. It crashes even if I try to analyze ONE picture.
I've read other posts but couldn't find any solutions. Is there a fix for this? Without the facial recognition, there's not much point in upgrading. In fact it forces me to look at other alternatives such as Google Picassa which does facial recognization just fine on my computer. But I'd prefer to stick with Elements if possible.
Any help would be appreciated.
I'm using Windows XP SP3 fully patched. Photoshop Elements 9 is fully up to date. My 256MB Geforce 6200 video card has the latest drivers installed. I've got 17 GB of free space on my hard drive and 1.5 GB of RAM.
Elements Organizer 9.0.0.0
Core Version: 9.0 (20100929.m.9165)
Language Version: 9.0 (20100929.m.9165)
Current Catalog:
Catalog Size: 28.8MB
Catalog Cache Size: 175.2MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: AMD CPU Family:6 Model:10 Stepping:0 with MMX, SSE Integer, SSE FP
Built-in Memory: 1.5GB
Free Memory: 751.3MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.69
Adobe Reader Version: Not installed
Adobe Acrobat Version: Not installed

Thank you for your response.
I did have everything unchecked in the Media Analysis preferences. It would still crash whenever I manually ran the Auto-Analyzer from the context menu or the "Start People Recognition" button.
I went ahead and checked just the "Face" option but the results are the same. When I click the "Start People Recognition" button, it brings up a box that says "Analyzing Your Media", it pauses for several seconds and then it crashes.
Any other suggestions? Do you know if this a software issue or a hardware issue?

Performance improvement in a function module

Hi All,
I am using SAP 6.0 version. I have a function module to retrive the PO's . for just 10,000 records its taking long time.
Can any one sugguest the ways to improve the performance.
Thanks in advance.

Moderator message - Welcome to SCN.
But
Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting
Just 10,000 records? The first rule in performance improvement is to reduce the amount of selected data. If you cannot do that, it's going to take time.
I wouldn't bother with a BAPI for so many records. Write some custom code to get only the data you need.
Tob

Performance improvement in OBIEE 11.1.1.5

Hi all,
In OBIEE 11.1.1.5 reports takes long time to load , Kindly provide me some performance improvement guides.
Thanks,
Haree.

Hi Haree,
Steps to improve the performance.
1. implement caching mechanism
2. use aggregates
3. use aggregate navigation
4. limit the number of initialisation blocks
5. turn off logging
6. carry out calculations in database
7. use materialized views if possible
8. use database hints
9. alter the NQSONFIG.ini parameters
Note:calculate all the aggregates in the Repository it self and Create a Fast Refresh for MV(Materialized views).
and you can also do one thing you can schedule an IBOT to run the report every 1 hour or some thing so that the report data will be cached and when the user runs the report the BI Server extracts the data from Cache
This is the latest version for OBIEE11g.
http://blogs.oracle.com/pa/resource/Oracle_OBIEE_Tuning_Guide.pdf
Report level:
1. Enable cache -- change nqsconfig instead of NO change to YES.
2. GO--> Physical layer --> right click table--> properties --> check cacheable.
3. Try to implement Aggregate mechanism.
4.Create Index/Partition in Database level.
There are multiple other ways to fine tune reports from OBIEE side itself:
1) You can check for your measures granularity in reports and have level base measures created in RPD using OBIEE utility.
http://www.rittmanmead.com/2007/10/using-the-obiee-aggregate-persistence-wizard/
This will pick your aggr tables and not detailed tables.
2) You can use Caching Seeding options. Using ibot or Using NQCMD command utility
http://www.artofbi.com/index.php/2010/03/obiee-ibots-obi-caching-strategy-with-seeding-cache/
http://satyaobieesolutions.blogspot.in/2012/07/different-to-manage-cache-in-obiee-one.html
OR
http://hiteshbiblog.blogspot.com/2010/08/obiee-schedule-purge-and-re-build-of.html
Using one of the above 2 methods, you can fine tune your reports and reduce the query time.
Also, on a safer side, just take the physical SQL from log and run it directly on DB to see the time taken and check for the explain plan with the help of a DBA.
Hope this help's
Thanks,
Satya
Edited by: Satya Ranki Reddy on Aug 12, 2012 7:39 PM
Edited by: Satya Ranki Reddy on Aug 12, 2012 8:12 PM
Edited by: Satya Ranki Reddy on Aug 12, 2012 8:20 PM

Why GN_INVOICE_CREATE has no performance improvement even in HANA landscape?

Hi All,
We have a pricing update program which is used to update the price for a Material Customer combination(CMC).This update is done using the FM 'GN_INVOICE_CREATE'.
The logic is designed to loop on customers, wherein this FM will be called passing all the materials valid for that customer.
This process is taking days(Approx 5 days) to get executed and updated for CMC of 100 million records.
Hence we are planning to move towards HANA for better improvement in performance.
We designed the same programs in the HANA landscape and executed it in both systems for 1 customer and 1000 material combination.
Unfortunately, both the systems gave same runtimes around 27 seconds for execution.
This is very disappointing thinking the performance improvement we should have on HANA landscape.
Could anyone throw light on any areas where we are missing out and why no performance improvement was obtained ?
Also is there any configuration related changes to be done on HANA landscape for better performance.?
The details regarding both the systems are as below.
Suite on HANA:
SAP_BASIS : 740
SAP_APPL : 617
ECC
SAP_BASIS : 731
SAP_APPL : 606
Also see the below screenshots of the system details.
HANA:
ECC:
Thanks & regards,
Naseem

Hi,
just to fill in on Lars' already exhaustive comments:
Migrating to HANA gives you lots of options to replace your own functionality (custom ABAP code) wuth HANA artifacts - views or SQLscript procedures. This is where you can really gain on performance. Expecting ABAP code to automatically run faster on HANA may be unrealistic, since it depends on the functionality of the code and how well it "translates" to a HANA environment. The key to really minimize run time is to replace DB calls with specific HANA views or procedures, then call these from your code.
I wrote a blog on this; you might find it useful as a general introduction:
A practical example of ABAP on HANA optimization
When it comes to SAP standard code, like your mentioned FM, it is true that SAP is migrating some of this functionality to HANA-optimized versions, but this doesn't mean everything will be optimized in one go. This particular FM is probably not among those being initially selected for "HANAification", so you basically have to either create your own functionality (which might not be advisable due to the fact that this might violate data integrity) or just be patient.
But again, the beauty of HANA lies in the brand new options for developers to utilize the new ways of pushing code down to the DB server. Check out the recommendations from Lars and you'll find yourself embarking on a new and exciting journey!
Also - as a good starting point - check out the HANA developer course on open.sap.com.
Regards,
Trond

DMA Performance Improvements for TIO-based Devices

Hello!
DMA Performance Improvements for TIO-based Devices
http://digital.ni.com/public.nsf/websearch/1B64310FAE9007C086256A1D006D9BBF
Can I apply the procedure to NI-DAQmx 9? These ini-files dont seem to exist anymore in the newer version.
Best, Viktor

Hi Viktor,
this page is 7 years old and doesn't apply to the DAQmx.
Regards, Stephan

Close elements auto analyzer

How do I close elements auto analyzer? I am trying to download a new camera raw version - elements 11 - and it has 2 seconds left but will go no further as the elements auto analyzer will not close. I went to organizer - edit - preferences - media analyzer - un checked run at start up but nothing has changed. Help! I have been strugggling with importing raw files from my Panasoic FZ200 for weeks and was 2 seconds to fixing it!

Thank you! It wasn't as easy as how you presented it but with the help of a friend as well we started with what you suggested and eventually got there. It works! Now my Lightroom 4 won't import the raw from my Lumix either but I don't think I can handle that today.
Sent from my iPad

Disable Adobe Premiere Elements 10 Auto-Analyzer

To complete an elements software update I have to disable the Auto analyzer. But the reason I'm trying to do the update is because the elements constantly thinks it's busy and won't allow anything to work, so I can't get to the elements organiser which is busy to turn the analyzer off. catch 22. What going on?
Any ideas please. thank you.

I just changed from PSE 11 to 12. With eleven all was fine with the auto analyzer, but with PSE 12 it has become a real pest -using lots of RAM and > 25% of CPU.
Though I unchecked all options the Auto Analyser started every time I opened PSE 12. I also checked the autostart options and the Registry. Finally I renamed the Program, similar to this instruction: http://barbarabrundage.com/2013/10/31/the-elements-12-auto-analyzer-adobes-evil-undead/
This works, but that cannot be the only sulution (apart from using the old version).
I hope someone has a good solution for this annoying part of PSE 12

Premiere Elements 4 auto analyze off

Help. I tried to install Premiere Elements 9 on my old Vista machine and got the dreaded error 1935 CE3230AC-E72E-3EDF-8A57-87FCE1CF2629 HRESULT: 0x80071A30. Searching for help, I came to the conclusion that it is a registry cash screwed up and reinstalling Vista is really the only way. So I went back, reinstalled Premiere Elements 4 and came here for help with: Auto Analyze, scene detect seems to be on and I can't turn it off??? Capturing video from DV leaves me with 100 files instead of the 1 I want. Impossible to find help/support for PE4. Anyone know now to turn this make many files on capture off????
Tom Pears tpearsATaol.com

Hello Steve
I have attached a couple screen shots. Let me know if you have any trouble seeing, I can always post them to another location.
You say
You can launch the Elements Organizer from the Premiere Elements Welcome screen when you first start the program.
I have attached the welcome screen where I see no way to launch Ele organizer. What am I missing? The top menu items are all unaccessable.
You say
The option to break scenes by content is on the the Capture screen, which opens when you select the DV Capture option under the Get Media button under the Premiere Elements Edit tab.
I can find no such option except one grayed out under clip back at the project screen. Again I have attached a couple screen shots to show you what I see.
There must be something obvious that I am missing or that is different about my APE4 instance.
Happy Sunday
3.
Steve Grisetti
Feb 15, 2013 5:16 AM in reply to tompears
Report
In order to turn off the background Auto Analyzer, you need to be in the Elements Organizer program. Not Premiere Elements. You can launch the Elements Organizer from the Premiere Elements Welcome screen when you first start the program.
The option to break scenes by content is on the the Capture screen, which opens when you select the DV Capture option under the Get Media button under the Premiere Elements Edit tab. This will only affect how the program performs with freshly captured DV video, of course.
Was this helpful? Yes No
Tom Pears
Applying Appropriate Technology to Education

Love the Bundle (PSE8/PE8), but I HATE THE AUTO-ANALYZER

Hello everyone;
I'm a big fan of the Adobe Bundel's (PSE & PE), I have been using them for over 3 years now, I started with PSE4/PE2, then PSE6/PE4 and now PSE8/PE8. I'm also a very avid user of the Organizer Yes I do, Call me Crazy, but I do like it. To be honest I cannot complain.
But, Dear Lord in the Heaven; What was Adobe thinking when they release this version with that THING called "Auto-Analyzer", it just create such a mess that is incredible. I wonder how the &*^%$ they tested this "Alien Thing", I think I now the answer for that one; They used Just Folder with only one photo.
Yes I did turn On the the "Auto-Destructive-Analyzer", and just imagine what this Virus did with over 15,000 pictures and 100's of video clips. So, after I recover from the SHOCK of this "Auto-Destructive-Analyzer", I turn it OFF and Untagged all those "Smart Tags".
Please ADOBE create a FIX to UNINSTALL/DESTROY/DELETE the "Auto-Analyzer" from the Organizer so nobdy will be able to turn it on by mistake.
The Bundle (PSE8/PE8) so far; I like it, But PLEASE, take my ADVICE DO NOT TURN ON THIS "THING".
Regards.

Hi administrator,
Thank you for your question, sorry to see you go. However, to turn autofucus off you can change this in the about:config page.
In order to change your Firefox Configuration please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page.
# browser.autofocus to false/
Thank you.

Performance improve using TEZ/HIVE

Hi,
I’m newbie in HDInsight. Sorry for asking simple Questions. I have queries around performance improvement of my HIVE query on File data of 90 GB (15 GB * 6).
We have enabled execution engine has TEZ, I heard the AVRO format improves the speed of execution, Is AVRO SERDE enabled TEZ Queries or do I need upload *.jar files to WASB. I’m using latest version. Any sample Query.
In TEZ, Will ORC Column Format and Avro compression can work together, when we set ORC compression level on hive has
Snappy and LZO ?. Is there any Limitation of Number of columns for ORC tables.
Is there any best compression technique to upload data file to Blob, I mean compress and upload. I used *.gz, which compressed by 1/4<sup>th</sup> of File Size and upload to Blob, but problem *.gz is not split able and it will always
uses less (single ) Mapper or should I use Avro with Snappy Compression . Is the Microsoft Avro Library performs snappy Compression or is there any compress which can be split and compress.
If data structure for file change over time , will there be necessity of reloading older data?. Can existing query works without change in code.
It has been said that TEZ has Real Time Reporting capability , but when I Query 90 GB file (It includes Group By, order by clauses) is taking almost 8 mins of time on 20 nodes, are there any pointers to improve performance further and get the Query result
in Seconds.
Mahender

-- Tez is an execution engine, I don't think you need any additional jar file to get AVRO Serde working on Hive when Tez is used. You can used AvroSerDe, AvroContainerInputFormat & AvroContainerOutputFormat to get AVRO working when tez is
used.
-- I tried creating a table with about 220 columns, although the table was empty, I was able to query from the table, how many columns does your table hold?
CREATE EXTERNAL TABLE LargColumnTable02(t1 string,.... t220 string)
PARTITIONED BY(EventDate string) ROW FORMAT DELIMITED FIELDS TERMINATED BY ',' STORED AS ORC LOCATION '/data'
tblproperties("orc.compress"="SNAPPY");
-- You can refer
http://dennyglee.com/2013/03/12/using-avro-with-hdinsight-on-azure-at-343-industries/
Getting Avro data into Azure Blob Storage Section
-- It depends on what data has change , if you are using Hadoop, HBase etc..
-- You will have to monitor your application check node manager logs if there is any pause in execution again. It depends on what you are doing, would suggest open a Support case to investigate further.

Adobe Premiere Elements 8 "Auto Analyzer" causes Microsoft Internet Explorer 9 and 10 to freeze.

Adobe Premiere Elements 8 "Auto Analyzer" causes Microsoft Internet Explorer 9 and 10 to freeze. How is this fixed? Uninstall your software?

Leo_Do
Are you running Premiere Elements 8 as the 8.0.1 Update. If not, please do so
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
The automatic Background Rendering and AutoAnalyzer features of version 8 are major grabbers of system resources.
The 8.0.1 shuts off the automatic Background Rendering feature. See Edit Menu/Preferences/General and the background
rendering option there.
But, you have to shut off the AutoAnalzyer feature yourself in the Elements Organizer part of the program. To do that:
1. Click on the Organizer tab in the row below the active Organize header in order to open the Elements Organizer.
2. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalzyer options and turn them all off.
3. To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer
workspace, go to File Menu/Exit.
But back to what you actually wrote
Adobe Premiere Elements 8 "Auto Analyzer" causes Microsoft Internet Explorer 9 and 10 to freeze. How is this fixed? Uninstall your software?
Are you saying, with Premiere Elements 8.0/8.0.1 closed, that you are having these freezing problems with the non Adobe programs mentioned OR are you multitasking with Premiere Elements 8.0/8.0.1 project open when the freeze occur in these non Adobe programs?
In the context of an opened or closed Premere Elements program, please check to be sure, when you close Premiere Elements, that the close is reflected in the Task Manager/Processes. When Premiere Elements is closed by you, are you still seeing it displayed in Task Manager/Processes?
We will be watching for your follow up and deciding what next based on the details that you supply.
Thanks.
ATR

Elements auto analyzer - what the hell???

Hi,
After i installed Premiere Elements (together with elements organizer) the CPU load is at 50-100% and my System disk is spammed with 30GB of data - and still not finished!!!
in the Task Manager i found a process called "Auto elements analyzer". What the hell is this there going on??? Adobe programms a process that
- runs in the Background and is NOT stopped, when the Programs are closed!
- produces tons of data
- produces immense CPU load
- has no Explanation for what it could or shoud do
i am really 1mm from deinstalling this crap!!!

If you do a Google search for 'Photoshop Elements autoanalyzer', you'll find many answers including this link:
FAQ: What is Auto-Analysis, or Why does Organizer freeze?
and this one:
The Elements 12 Auto Analyzer–Adobe’s Evil Undead | Barbara's Sort-of-Tech Blog
You don't state your version of Elements, and that is important, since most of the tasks of the autoanalyzer have been removed from version 13.
The autoanalyzer was mainly used by Premiere Elements users, so I would also ask in the dedicated forum:
Premiere Elements

Auto analyzer performance improvements in version 9

Similar Messages

Maybe you are looking for