Auto_annotation data commented in .ldt file after running fndload download

Hi guys,
After running fndload to download conc program .ldt file created 'afcpprog.lct 115.40' is having auto_annotation code in '/*..*/' that is commented code,contains parameters list inside,I think due to that when .ldt file uploaded it doesn't copy parameters with conc program, can you please suggest solution for this.
BEGIN PROGRAM 'GEONTEUPROFINVXML' 'GEMSONT'...rnSRS_FLEX = 'GEMSONT' '$SRS$.GEONTEUPROFINVXML'rn AUTO_ANNOTATION =rn '/**nrn * @param org_id org_idnrn * @rep:paraminfo {@rep:type OE: Number Zero Precision} {@rep:displayed N} {@rep:required}nrn------* @rep:paraminfo {@rep:type 100 Characters} {@rep:displayed Y}nrn */'....end programrnrnrncan you pl suggest solution for this
Thanks,
varun

Hi guys,
After running fndload to download conc program .ldt file created 'afcpprog.lct 115.40' is having auto_annotation code in '/*..*/' that is commented code,contains parameters list inside,I think due to that when .ldt file uploaded it doesn't copy parameters with conc program, can you please suggest solution for this.
BEGIN PROGRAM 'GEONTEUPROFINVXML' 'GEMSONT'...rnSRS_FLEX = 'GEMSONT' '$SRS$.GEONTEUPROFINVXML'rn AUTO_ANNOTATION =rn '/**nrn * @param org_id org_idnrn * @rep:paraminfo {@rep:type OE: Number Zero Precision} {@rep:displayed N} {@rep:required}nrn------* @rep:paraminfo {@rep:type 100 Characters} {@rep:displayed Y}nrn */'....end programrnrnrncan you pl suggest solution for this
Thanks,
varun

Similar Messages

  • Write data to multiple text files after specific size

    Hello,
    I wrote a code that contineously writes data to  a text file. The problem is I am running this VI for long time and therefore this text file is being bigger in size e.g. more than 10MB. I want to split writing data in this text file after max 1MB size. Can anyone help ????
    thanks in advance.

    CMW.. wrote:
    You could use the "File/Directory Info Function" in the Advanced File VIs and Function palette to check the size. If the file is too big. close it and create a new one.
    I would use the Get File Position since this won't cause Windows to have to do so much.  Assuming you are just writing and not setting the file position manually, this will return the size of the file in bytes (file position will always be at the end of the file).
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Why can't I open/play my movie files after I have downloaded them from my camera? Pictures open fine.

    Why can't I open/play my movie files after I have downloaded them from my camera? Pictures open fine.

    What system and iPhoto version are you running and do you have Qjuicktime Player 7 installed. It would be in the Applications or Applications/Utilities folder.
    OT

  • CUNIT error in data loading from flat file after r/3 extraction

    Hi all
    After R/3 business content extraction, if i load data from flat file to info cube, I am getting Conversion exit CUNIT error, what might be the reason, the data in the flat file 0unit column is accurate, and mapping rules are also correct, but still i am getting error with CUNIT.?

    check your unit if you are loading amount or quantities what mapping you have and what you are loading from flat files.
    BK

  • Exporting .trx file after running testcases using TFS Inrelease 2013.4

    Hi All,
    Need your inputs in achieving a major blocker in our release process: 
    1) We are running testcases as the part of release process using Inrelease TFS 2013.4 .
    2) Testcases runs fine in a lab environment and the issues come wrt to .trx file.
    3) We couldn't find any .trx file in my RM deployer, after digging into the issue found the PS Script (TCMExec1.PS) has no option to export .trx file rather , it delete the .trx file .
    Look at below highlighted line : 
    If I comment the delete statement , it exports to %appdate%temp../RM../ location , every time I trigger test cases.
    Since it creates a new folder every time I run testcases, I m not able to read trx file to publish a customized report(We have written a login for this)
    Could you please help me with an option/script  to export to one particular location ? Like C:\Report ?  
    (Optional: Environment : TFS 2013.4 , Rm 2013.4, We are using RM Deployer ,MTM (Labcenter) 2013.4 )
    Many Thanks,
    Abraham Dhanyaraj

    Hi Abraham,
    I am glad to hear you resolved the issue. Thanks for sharing your experience here, it is good to other members who experience the same issue in the community.
    Best regards,

  • How do I restore my backup (.wim files) after running HP System recovery on a G62 with windows 7

    I had to do a system restore after getting a blue screen and I backed up the files on my external drive. after restoring the system I tried to restore my files from my external with Recovery manager but it didn't see my external so I couldn't restore. I copied and pasted the backup folder on my g62 desktop and tried again with no results. As far as I can tell the restore was done because my free space on the g 62 decreased by the same size as the backup, but when I open the c:\ drive I can't see the transfer. these are .wim files and I even tried to call tech service (my warranty juse expired) and they were trying to sell me extended warranty for the next year to help me. the problem exist with HP if they had good programs that follow up what it was meant to do maybe Today I wouldn't be here looking for help. when I restored the system, recovery told me the it would install my backup, but nothing happened leaving me hanging.NEED HELP!!!!!!!!!!!!!!

    If you call AppleCare they will be more than willing to help you. Use the appropriate phone number on this page. Tell them you need a support related fulfillment - replacement disks. As shldr says there will be a small charge, but you will be able to install your system again.
    Best of luck.

  • Recover files after run recovery disk

    Hi, i have an a305-s6898 with Xp.
    I carry the NB to service and there they run the Recovery Disk (that crash, delete, erase, all my XP system, files, mails, disk partitions, etc)
    Does any have an idea if a could recover some files?  (mi xp configuration, partitions, files, something?)
    Does any have an idea if i should (must or could) call to toshiba center and tell him, that his service center at argentnina sucks!?
    Thanks.

    The only chance you have of getting anything back is by sending the drive to one of the drive recovery specialist companies and have them see if they can retreive them.  There is no guarantee that they will be able to do so and the cost would begin around $1000.00 and go up from there. Unless you have some priceless documents or photos that can't be replaced you might as well just move on.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Where are my files after running Migration Assistant?

    I ran Migration Assistant using a Time Machine back up as I bought a new MacBook Pro that could hold all my files that I previously had on an iMac and another MacBook Pro. I first ran Migration Assistant and got all my files, preferences etc. on the new MBP no problem, but then after trying to combine the files from the iMac using a Time Machine back up as well, I don't see any of the files from my iMac available anywhere. However, all the space is filled up. Where are my files? Am I doing it wrong?

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

  • Finder changed creation date on my picture files after upgrading to 10.5

    maybe somebody on that forum can help me. I installed Leopard on my Macbook pro. it works ok a bit sluggish not as smooth as the old tiger. But my biggest problem all my pictures (wedding photos of clients) the creation date in finder has changed to Dec31 1903 9am or 8am. Anybody has a clue how i can reset that or are all creation dates are lost

    Welcome to the forums... unfortunately SMB issues are not fully mainstream.
    Anyhow, I have scanned the change log of files touched by the update (searching for SMB - original list courtesy of Rixstep). This yielded:
    /Library/Preferences/SystemConfiguration/com.apple.smb.server.plist
    /private/etc/smb.conf
    /System/Library/CoreServices/SmbFileServer.bundle/Versions/A/Resources/DesktopDe faults.plist
    /System/Library/LaunchDaemons/com.apple.smb.server.preferences.plist
    /System/Library/LaunchDaemons/com.apple.smbfsloadkext.plist
    /System/Library/LaunchDaemons/smbd.plist
    /private/etc/smb.conf.template
    /System/Library/Extensions/smbfs.kext
    /System/Library/Extensions/smbfs.kext/Contents/CodeDirectory
    /System/Library/Extensions/smbfs.kext/Contents/CodeRequirements
    /System/Library/Extensions/smbfs.kext/Contents/CodeResources
    /System/Library/Extensions/smbfs.kext/Contents/CodeSignature
    /System/Library/Extensions/smbfs.kext/Contents/Info.plist
    /System/Library/Extensions/smbfs.kext/Contents/MacOS/smbfs
    /System/Library/Extensions/smbfs.kext/Contents/Resources/load_smbfs
    /System/Library/Extensions/smbfs.kext/Contents/version.plist
    /System/Library/Filesystems/smbfs.fs
    /System/Library/Filesystems/smbfs.fs/Contents
    /System/Library/Filesystems/smbfs.fs/Contents/Info.plist
    /System/Library/Filesystems/smbfs.fs/Contents/Resources
    /System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj
    /System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj/InfoPlist. strings
    /usr/lib/sasl2/smb_lm.so
    /usr/lib/sasl2/smb_nt.so
    /usr/lib/sasl2/smb_ntlmv2.so
    /private/var/db/smb.conf
    Items highlighted in bold could be relevant.
    Have you checked that your entry in nsmb.conf is intact? If it is, could it be overridden by a change to one of the other conf files (or a plist)?

  • I am having trouble displaying my PDF file after running script.

    I am getting a blank screen.  Does anyone know how to fix this?

    You'll need to provide more information. Starting with what "script" you're talking about, and what application you're using to open the file.

  • After running Adobe Download assistant I get a warning window.

    It took all day to run the Adobe Download Assistant for Adobe CS6 Master Collection. When the .dmg finished downloading, up popped the warning window, "MasterCollection_CS6_invalid schecksum.
    I tried to open the .dmg from the folder to which I downloaded it (yes, it was not the Applications folder), and it gave me the same "warning". What does that mean? I really do not have another whole day to wait and I saw your cloud option but I am an anti-cloud user. I am installing onto a new iMac 27" running Lion (OS10.7). I was able to download and install the same trial on my work, iMac running Mountain Lion. Please help.

    You need to redownload the installer, since the  download is corrupt.
    Since you already downloaded it on your work iMac, you can use the same .dmg file to install it on your new iMac27.

  • Can someone help me? How do I change the option to pick where or what program I want to open a file after I've downloaded it? I tried to look for an option for this and can't find it anywhere.

    For example I download a file and I click on it and there will sometimes be a window that opens saying what program I want to open the file with? And then it'll also have a check box saying if I want to use this program for all files I download. I can't change it when I download the file because that one file I keep downloading keeps crashing my Firefox and I have to force quit. It's really getting on my nerves. It's an online statement I'm trying to view and I want to get rid of that problem!! Is there anyway to change that option without going to that download page?

    I would recommend going into device manager on your PC and making sure that you have correctly installed the IR dongle. Also what version of hotsync manager are you currently using?
    Post relates to: Treo 800w (Sprint)

  • After running the download i get a mesage error from windows

    I get a message from windows saying i have to verify this program? i just downloaded other things and it worked? what is going wrong?

    What's the precise text of the message, please, chardy? (There's a few different ones I can think of that you might be getting.)

  • Data definition, templates and ldt files

    Can anyone,please, advise me where should i look up for templates,data definitions and ldt files for certain concurrent requests? I am relatively new to EBS, not quite sure where I should start looking..
    Edited by: maylo on Feb 23, 2013 4:28 AM

    maylo wrote:
    Thank you All for your reply.
    What entities (rdf, xml, concurrent programs, data definitions.....) are required to consider when migrating customization reports? Is it enough to move rdf, ldt (for concurrent program) and xml template? Do I need to get ldt for Data Definition and Templates using something like this:
    FNDLOAD apps/$CLIENT_APPS_PWD O Y DOWNLOAD $XDO_TOP/patch/115/import/xdotmpl.lct XX_CUSTOM_DD.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME='XXCUST' DATA_SOURCE_CODE='XX_SOURCE_CODE' TMPL_APP_SHORT_NAME='XXCUST' TEMPLATE_CODE='XX_SOURCE_CODE'
    If anyone could give just a big picture of what is required to migrate when migrating customization reports.
    Thank you
    Maylo
    Edited by: maylo on Mar 13, 2013 1:53 AMPlease see these docs.
    How To Use XDOLoader to Manage, Download and Upload Files? [ID 469585.1]
    Running XDOLoader to Download Data for XML Publiser Data Definitions Fails with ORA-6401 [ID 374195.1]
    Unable to Download Data Templates With XDOLoader: java.lang.NullPointerException [ID 428956.1]
    How To Upload Xliff Files for XML Publisher Using XDOLoader [ID 810163.1]
    Thanks,
    Hussein

  • Delete data from a flat file using PL/SQL -- Please help.. urgent

    Hi All,
    We are writing data to a flat file using Text_IO.Put_Line command. We want to delete data / record from that file after data is written onto it.
    Please let us know if this is possible.
    Thanks in advance.
    Vaishali

    There's nothing in UTL_FILE to do this, so your options are either to write a Java stored procedure to do it or to use whatever mechanism the host operating system supports for editing files.
    Alternatively, you could write a PL/SQL procedure to read each line in from the file and then write them out to a second file, discarding the line you don't want along the way.

Maybe you are looking for