Auto answer feature

Why would the phone not have an auto answer for incoming calls feature ? How lame is that! I bought this phone because I wear hearing aids. Isn't the whole idea of Bluetooth is to make it hands free, especially while driving?

I'm sorry, but the function of Bluetooth has to do with the Bluetooth device. There is no setting on the iPhone for auto-answer, however if you would like to suggest this enhancement to Apple you may do so at http://www.apple.com/feedback and click on the appropriate link. My Bluetooth device allows me to either use a button to answer the device to speak into it when the phone rings and it answers.

Similar Messages

  • Officejet Pro 8610: Will not Auto Answer

    Evening all.  We just purchased two HP Officejet Pro 8610's and have set them up at the office, however, we have noticed that even though we have the Auto Answer feature enabled, neither machine is automatically answering.  Instead they are still requiring a manual "yes, go ahead and answer that" button press which does not work for us as we often do not have people around those machines.
    In running a Fax Test Report I got the following print-out...
    Fax Hardware Test:  PASS
    Fax Connected to Active Telephone Wall Jack:  PASS
    Phone Cord Connected to Correct Port on Fax:  PASS
    Using Correct Type of Phone Cord with Fax:  PASS
    Dial Tone Detection:  PASS
    Fax Line Condition Test:  PASS
    Language:  English
    Country/Region:  USA
    Auto Answer:  On
    Rings to Answer:  2
    Fax Paper Size:  Letter
    Tone or Pulse Dialing:  Tone Dialing
    Fax Sound Volume:  Soft
    Distinctive Ring:  Single Rings
    Busy Redial:  Redial
    No Answer Redial:  No Redial
    Automatic Reduction:  On
    Backup Fax Reception:  On
    Error Correction Mode:  On
    Fax Speed:  Medium (14400)
    Fax Forwarding:  Off
    Communication Error Redial:  Redial
    Our header and number have also been set.  At this time I am assuming I missed something in the User's Manual, since this is happening with both machines.  Might someone know of what I missed?
    This question was solved.
    View Solution.

    Hi RandyT9,
    I believe it is related to distintive ring setting. Have you tried to set the Distinctive Ring feature to All Rings and see if the printer can answer it automatically?
    If you using distintive ring  service, please refer to User manual on the distinctive ring setting.
    If you are not using a distinctive ring service, check to make sure that the Distinctive Ring
    feature on the printer is set to All Rings.
    Hope this may helps.
    Regards,
    Although I am an HP employee, I am speaking for myself and not for HP.
    Let others know this reply was helpful by accepting this solution. You can also show your appreciation by giving kudos.

  • Auto answer using headset

    I have an iPhone 3Gs and use a wired headset to listen to music. When a call comes in, I have to dig out the phone to answer I'm looking for a setting that will allow the phone to answer on it's own when connected to earphones, but can't seem to find one. Older style(non-Apple) phone had that ablility. A I missing something here?

    There is no auto-answer feature. Which wired headset? The Apple headset can be used to answer the call by pressing the button on the cord.

  • Individualized auto answer on video calls

    This is NOT a question. This is a suggestion!
    I could find no other option for sending feedback/ suggestios to Skype. Further there is definitely a very good reason for making this suggestion. My family all live overseas in the USA. Although I prefer to have my skype set on "auto answer" for my children ...I would not like it set this way for "everyone. This is a major privacy issue for me ...especially since my husband here is dying of cancer and my eldest daughter in the USA just had open heart surgery. I could give you a ton of reason why myself ...and others ...would prefer for the "auto answer" feature was an individualized feature. We should be able to choose/ list those people that we wish our skype to "automatically answer" especially on video calls ...or at least list those that we do not wish to include. 
    Because I have been a programmer for almost 3 decades ...I know that this is possible ... it would be a relatively easy subroutine in the hands of any programmer worth their salt! 
    So. How about it people?!

    Edit: i'm referring to the initial suggestion btw
    please please PLEASE follow this suggestion! i also agree that there should be a customizable list as to whose calls will be automatically answered. i don't want to automatically answer every incoming call that i have, even if it's specified as 'contact's only'. and relying on third party programs to do this for you just proves that the programmers of skype may be too inept, indifferent, or just lazy to add such a small addition. PLEASE UPDATE

  • Auto answer on 7940

    I am using a cisco 7940 ip phone in combination with ccme and I was wondering whether it is possible to automatically answer incoming calls. Thanks in advance!
    Jeroen

    Jeroen,
    There are at least a couple of options.
    With CME 4.0 and later you can use the Headset Auto-Answer feature which allows auto-answer when the headset key is activated. See the following link.
    http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a8318.html#wp1075603
    Another option is to configure a DN as an intercom line which auto answers by default. There are some restrictions, such as the intercom DN can only be associated with one phone. Take a look at the following link.
    http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_command_reference_chapter09186a0080611355.html#wp1050890
    Hope this helps. If so, please rate the post.
    Brandon

  • HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

    I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
    I tried to undo it but the app crashed.
    I am hoping there's like a previously saved version of my file in iCloud somewhere. 

    No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

  • My auto translate feature is not working on firefox v5. When I highlight a few words and right click, the option is'nt there to translate. Why?

    Ok so my auto translate feature does not seem to be working. When trying to translate text on twitter or any page I highlight the text, right click and the option to auto translate has gone. I am running firefox v5 on vista. Can anyone help me out.
    thanks

    Sorry that my guess about what you are using was wrong. How about telling us exactly what you installed to provide that '''auto translate''' feature in Firefox?
    If you don't know, give us a list of the extensions that you ''do'' have installed so that we don't have to wildly guess or so we can do an '''''educated guess''''' as to which one isn't working.
    Help > Troubleshooting Information = use the '''Copy all to clipboard''' button, then paste into a text editor program. Then delete all but the list of '''Extensions''' and copy'n'paste that to the Reply box here.

  • We are trying to package our iTunes Windows and we can't stop the auto update feature.  How can we do this?

    We have consultants here packaging many of our Apps for deployment with Windows 7.  We cannot find a way to turn off the auto update feature within iTunes for Windows.  Has someone been successful in packaging iTunes for Windows and NOT do the auto update piece?

    The Apple advice revolves around the editing the registry:
    Windows OS Managed Client: How to manage iTunes control features
    ... but it's beyond my competence to advise how to work that particular registry edit into a deployment, I'm afraid.

  • To Turn off of or set auto complete feature in Adobe reader 8 through LC designer

    Hi i am developing the XDP through LC designer . After renering the PDF through form server if i open the PDF in adobe reader 8 it pop up message saying auto complete . I dont want to dispaly the pop up message iwhile opening the PDF in reader 8 . So Please provide scripts or some alternative to set in the XDP side to set the auto complete eature to off

    Hi,
    I suspect that the auto complete feature is turned on in Reader 8 (and off in Reader 9).
    Open Reader 8 and go the preferences:
    Make sure auto complete is turned off.
    Good luck,
    Niall

  • Auto answer after a few rings?

    I use to have a phone that had the autoanswering option in the setting while hooked to a headset. It would be very convenient on the IPhone cause I have a telecom system for my motorcycle and i'd like my IPhone to auto answer after a few rings.
    Any idea how-to do that if possible?
    Thanks.

    It's not possible. that's not a feature of the iPhone OS.

  • Auto-Suggest feature in Combo-box LOV is not displaying non-unique values

    Hi,
    I have an auto-suggest feature implementation on a combo-box lov that displays the name and email-id of a list of people. There are non-unique names in the back-end, for example :
    Abraham Mason [email protected]
    Abraham Mason [email protected]
    But when I use the auto-suggest feature and type in, say 'Ab', instead of showing both the Abraham Masons the auto-suggest displays only one of the values.
    As in the example above the email-ids of the two Abraham Masons are different and unique.
    If I use the conventional drop down menu of the combo-box then both the values are visible.
    Is the auto-suggest feature implemented in a manner so as to display only unique values?
    This is the implementation of the auto-suggest feature that I have done -
    <af:column headerText="#{bindings.RqmtAtLevel1.hints.Owner.label}"
    id="c23" sortable="true" filterable="true"
    sortProperty="Owner"
    filterFeatures="caseInsensitive">
    <af:inputComboboxListOfValues id="ownerId"
    popupTitle="#{ResourcesGenBundle['Header.SearchandSelect.Searchandselectanobjectusingad']}: #{bindings.RqmtAtLevel1.hints.Owner.label}"
    value="#{row.bindings.Owner.inputValue}"
    model="#{row.bindings.Owner.listOfValuesModel}"
    required="#{bindings.RqmtAtLevel1.hints.Owner.mandatory}"
    columns="#{bindings.RqmtAtLevel1.hints.Owner.displayWidth}"
    shortDesc="#{bindings.RqmtAtLevel1.hints.Owner.tooltip}"
    autoSubmit="true">
    <f:validator binding="#{row.bindings.Owner.validator}"/>
    <af:autoSuggestBehavior suggestedItems="#{row.bindings.Owner.suggestedItems}"/>
    </af:inputComboboxListOfValues>
    </af:column>
    Thanks,
    Anirudh Acharya

    Hi,
    don't find a bug entry about this, so if this indeed is a defect then this has not been filed. Do you have a test case ? If you have please zip it up and send it in a mail to me. My mail address is in my OTN profile (just click on my name until you get to the profile). Pleas rename the "zip" extension to "unzip" and mention the JDeveloper release you work with. The test case should work against the Oracle HR schema.
    If you need to track the issue, I suggest to file a service request with customer support yourself
    Frank

  • Screen Sharing scrolling, can the auto-pan feature be turned off?

    I am using screen sharing from home on my MacBook Pro to connect to my Mac Pro at work and it performs really well in all respects but one. My Mac Pro has dual monitors, so Screen Sharing running on my MacBook Pro gives me the option of either scaling the larger screen down, which is not readable, or being able to scroll around the larger screen of my work machine. The problem is that Screen Sharing has the automatic pan feature so that if my mouse moves to the edge of the window showing the shared screen then it starts scrolling it. This is nice the first time you see it but quickly becomes annoying because every random mouse movement that takes me to the edge of the window, like moving the mouse out of that window to go the the dock or the menu of my MacBook Pro, starts scrolling the screen when I did not want it to. I find myself constantly re-centering the view of the shared screen in the window back to the position I want it in and I find this to be a very anti-productive waste of time. I would like the auto-pan feature disabled so that it will only scroll when I grab a scroll bar and move it. Is it possible to do this?

    Hey all,
    I'm having the exact same problem with a Toshiba Satellite P300 here. The multimedia button seems so sensitive that the laptop will turn on by itself after a while. I haven't been able to find a program to disable it. Has anyone found a solution to this? If you do, please send me an email at [email protected] (remove the nospam) so I can fix it once and for all.
    Thanks,
    Dre

  • Reordering pages: No auto renumbering feature?

    I think I'm missing something here. I've changed the order of a few pages, and it went well. However, the original page numbers are intact, and now out of sequence.
    Must I manually change all of my page numbers to reflect their new numerical order, then re-publish?
    Trust me, I've checked the help file, and thoroughly searched the discussion forum, but find nothing about page renumbering - and certainly not an auto-renumbering feature.
    Thanks.

    Sorry, there is no pagination or page numbering on/off feature. Silly that such a basic function does not exist. Pages are numbered according to their order of creation, and so I had to renumber 30+ pages manually, and during the re-publish process I got an error message regarding one of the page numbers and I have no idea what it meant, nor how to correct the error.
    Let us hope that a few of the very basic features that we have come to expect in a word processor - like auto pagination, will be included in the next iWeb patch or version upgrade.

  • How to Implement Auto tabbing feature in a table region???

    Hi All,
    I am trying to implement auto tabbing feature in one of my OAF page using java script which is actually working for individual items but
    while implementing the same for a table bean its not working. is there any way to implement this feature in OAF without using java script?
    if not could anyone give some rough java script for this feature? please this is urgent..
    Thanks in advance
    Sree

    Sree,
    check this if it helps ;
    https://forums.oracle.com/thread/963732
    Not sure we can set Focus in : PFR ,  I hope it is possible in only PR.
    Regards
    Sridhar

  • Recommeneded Auto Update Feature in 11.1 Grid Control

    Hi All,
    I would like inform you about New Auto Update feature in the 11.1 Grid Control Installer. This feature allows the latest recommended patches to be automatically deployed while installing a fresh 11.1 Grid control or while upgrading an existing Grid control to 11.1 version.
    These auto updates ensure that any patches required by the oracle installer or for successful installation/upgrade of the product are applied before the actual installation or upgrade process. It ensures that there are no failed installations or upgrades from known issues.
    Oracle highly recommends using this feature to ensure that any new or upgraded Enterprise Manager installation is successful
    To know more about usage and benefits of this feature Refer to :
    1. Note.1101208.1 Required Patches for Grid Control 11g (11.1.0.1.0) on Linux
    2. Note.1099123.1 Overview of the "Auto Update" Feature Available with Grid Control 11g Install/Upgrade
    3. Refer to this PDF
    4. Use Install forum to place your queries
    Note:- If you have downloaded and installed your Grid control before15th May 2010 then we recommend you to apply this Generic Agent patch 9676134 on all your target boxes. Refer to the Read-me of the patch for exact instructions. If you don't have this patch applied then you will see this patch appear in MOS recommended section for that target as well.
    This patch fixes the performance issue that is caused by Grid control 11.1 running a metric query against the v$rman_backup_job_details view on target database instances for Oracle Database 10g Release 2 (10.2.0.1) or higher. In some situations, this query might expose RDBMS bug 8434467, in which the query can run for an extended period of time, resulting in high CPU utilization.If you notice this problem, it is recommended that you apply the patches listed below, which will reduce the the frequency of the query.

    Thank you

Maybe you are looking for