Auto answer on iPhone

I spend a lot of time on my motorbike as part of my job and really need to be able to set my iPhone to auto-answer - how do I do this?

Have you searched for an auto-answer bluetooth headset?

Similar Messages

  • How to set auto answer for bluetooth

    Hi i took apple iphone 4s recently i need to set up my bluetooth with auto answer is anybody help me how to keep this.
    Rajender

    There is no auto answer for iphones.

  • Which is the best handsfree auto answer app for iPhone

    Which is the best handsfree auto answer app for text messages on Iphone?

    There aren't any that I know of.

  • Auto answer setting in iphone 3G

    I ride a motorbike and have a bluetooth system to my helmet. I have the phone in the back of the bike or in my pocket. Phone rings but I can't answer it because of where the phone is located. I know with the other phones i have had in the past they had a setting to auto answer the phone after 3 rings when connected to a bluetooth headset. Is this possible running 3.0 on the iphone.
    I realy don't want to have to purchase any more equipment to get this to work.

    Short answer: Regrettably, not from the iPhone itself. There are a couple Bluetooth earpieces that have an auto answer option and will work with the iPhone (Cardo S-800, some BlueAnt models). I have tried both, but have found them not to fit well with my ear, so I keep on using a Nokia 6300 and Jabra BT 5020.
    I have numerous times asked Apple to include auto answer as an option on the iPhone (through http://www.apple.com/support/feedback/), but without tangible results. I would suggest that any who wish this feature also ask for it through the above mechanism. Perhaps numerous requests will bring results.

  • DOES THE IPHONE 6 HAVE AN AUTO ANSWER FUNCTION

    I just bought a portable speaker for my iPhone for use in my shop.  It is not blue tooth and the phone must be connected to the speaker through the earphone jack.  The speaker has an answer function that interrupts the music for an incoming call and a microphone to facilitate hands free usage.  The big catch seems to be that I still must push the answer button on my iPhone screen to answer the call.  I hope I am missing something.  Does the iPhone 6 have an auto answer function?

    This seems incredible. How could Apple pass up such a basic function.  I don't have a car new enough to integrate with my phone so I just assumed that auto-answer was a common feature in all smart phones.  I seem to remember disabling this feature in an LG android phone several years ago.  What am I missing?

  • Why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

    why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

    Your question sounds more like a statement.
    It's just a phone afterall...

  • Auto answer after a few rings?

    I use to have a phone that had the autoanswering option in the setting while hooked to a headset. It would be very convenient on the IPhone cause I have a telecom system for my motorcycle and i'd like my IPhone to auto answer after a few rings.
    Any idea how-to do that if possible?
    Thanks.

    It's not possible. that's not a feature of the iPhone OS.

  • How can i set Messages to auto answer video chats?

    I used to be able to have iMessages and iChat auto-answer incoming video chat/calls.  I use this to communicate with staff who may not be able to quickly accept the incoming event.

    Hi,
    The AppleScript for this is still  there.
    It can be set in Messages Menu > Preference > General Section in the bottom drop down.
    The Sound/alerts pane has gone in Mavericks and sound can now only be changed for  "Messages Received".
    Although I must admit to not trying it I have presumed the AppleScript would then only work for Text Invites.
    Having said that the AppleScript should be able to run as a separate even like an App from the Dock.
    The Drop Down in Messages has an Option to Show In Finder effectively.
    9:47 pm      Saturday; January 11, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • UCCX 8.02 - call volume on the tone for auto answer

    I have UCCX r8.02. Our agents are configured to have auto answer and calls drop into their headset, the agent set does not ring. The agents hear a tone and are alerted of the call before the caller is connected. Is there anyway to turn up the volume on the tone the agent hears?

    I don't believe so. I mean, outside of turning up the headset volume. Of course this is not a UCCX question, rather a CUCM question. There's a separate forum for that, and those guys may know.
    The hacker in me would root the CUCM and search for the audio file on the disk and modify it. But, that's more than most will risk for a simple audio increase.
    Sent from Cisco Technical Support iPhone App

  • Why is my facetime app not on my iphone?just bought the app should it transfer auto to my iphone during sync?

    why is my facetime app not on my iphone?just bought the app should it transfer auto to my iphone during sync?

    There is no FaceTime app for the iPhone. Settings>Phone>FaceTime>On.
    http://support.apple.com/kb/ht4319

  • Auto answer feature

    Why would the phone not have an auto answer for incoming calls feature ? How lame is that! I bought this phone because I wear hearing aids. Isn't the whole idea of Bluetooth is to make it hands free, especially while driving?

    I'm sorry, but the function of Bluetooth has to do with the Bluetooth device. There is no setting on the iPhone for auto-answer, however if you would like to suggest this enhancement to Apple you may do so at http://www.apple.com/feedback and click on the appropriate link. My Bluetooth device allows me to either use a button to answer the device to speak into it when the phone rings and it answers.

  • Auto answer using headset

    I have an iPhone 3Gs and use a wired headset to listen to music. When a call comes in, I have to dig out the phone to answer I'm looking for a setting that will allow the phone to answer on it's own when connected to earphones, but can't seem to find one. Older style(non-Apple) phone had that ablility. A I missing something here?

    There is no auto-answer feature. Which wired headset? The Apple headset can be used to answer the call by pressing the button on the cord.

  • Ghost calls, auto answer machine and static interference during calls.

    Hi I have so many issues since I joined EE network. It's my first time with EE and the experience so far has been a very disappointing one.
    Don't know where to begin.
    The figures below are average number of times.
    Static interference - 6 out of 10 calls will experience a static interference. Even after few immediate attempts
    Ghost call - 8 out of 10 calls will experience what I call are ghost calls. It's when I call someone it's dead silent, no ring tone but on the screen it shows the call has been received and the timer is on. Really annoying When I have to reach that person immediately. It takes several attempts before the call actually connects.
    Auto answer machine - this ones not just annoying to me but the caller whose attempting to call me. It's embarrassing too.
    8 out of 10 callers have been complaining to me that they're calls kept on going to the answer machine. But during that time my phones been free and showing full coverage . I know this because I experimented few times where I got the caller to call me after meeting them in person few mins after the issue.
    Recent issue that occurred has me monitoring my data usage.
    I connected my phone to iTunes on my PC and I noticed it turned on something with a chain link on top of my iPhone screen. I didn't take much notice of it thinking it's probably because I connected to my PC. Couple of hours later I receive a message from EE informing me that I used up 80% of my data. That's when I realised it turned on my personal hotspot. But who was connected to it? I don't remember turning it on and my PC was connected to the router via Ethernet cable. Wifi dongle was disconnected from my PC so it wasn't the PC using up my data. Now I'm having to worry about using all my data before my monthly reload I got another 24 days left before my next reload, which is a long time because I need my data for the line of work I'm in.
    I never experienced any of those issues with my previous network provider. Wishing I haven't changed now.

    Hi 
    Welcome to the EE Community!
    Sorry to hear you are experiencing these problems. I had the same kind of issues when I got my first iPhone 5 and totally understand how frustrating it can be.
    The issues you have described sound like a mix of both network and device issues.
    Have you had a look at our Coverage Checker to see what the signal is like in your area?
    What model iPhone are you using?
    Thanks. 

  • How to disable auto charge of iPhone via PC?

    How to disable auto charge of iPhone via PC?

    I'm thinking you may have the concern of not overcharging or messing with charge cycles of your phone, but according to apple the Li-ion batteries in iDevices work this way for example
    -Your phone has 50% battery left, you charge it
    -after using again, you're back with 50 and charging it till full once again makes it 1 charge cycle
    Doesn't work like nickel batteries.
    Here's the article:
    Www.apple.com/batteries for some
    Battery care tips.

  • How do I set up a port on a SPA8000 to auto answer for a 2 way intercom/paging?

    I have a customer with an analog pbx system now that I am changing over to a sip system. They have a few lines that need to still have analog connectivity so I am installing a Cisco/Linksys SPA8000. One of my issues is with a 2-way PA system between their main office and shop. They have a Viking Model HF-3W paging system presently that allows them to communicate both ways without having to pick up a phone at the shop. I need to set the SPA8000 to have one port auto answer for this paging system but I am not sure how.

    See attached LV86 example. Open the properties dialog of the knob for more info about its configuration.
    Attachments:
    Log knob LV86.vi ‏7 KB

Maybe you are looking for

  • SQL Server TechNet Guru News: October Winners Announced

    All the votes are in!  And below are the results for the TechNet Guru Awards, October 2014 !!!! For a full list of winners, see the full blog post, as runners up had to be removed from this post to fit the forum max length restrictions.  BizTalk Tech

  • IPhoto '09 seems to be incompatible with Mountain Lion

    Hi I am a long-standing major fan of Apple computers. This is because they allow me to work easily with images. I am an art historian and museum curator. My professional life is entirely about images ... or rather about images attached to data. For y

  • Validation Problem

    After adding new rows in tabular form, If the user tries to exit before clicking on save or cancel, a dialog box or an error message should appear saying "Please press save or cancel before exit". How can I achieve this? I am using jdeveloper 10.1.3

  • RMAN-03002: failure of recover command

    Hi all, I am testing a new backup and restore mechanism of a 11.2 system in Linux. A third mirror of the disks from the database server has been split and mounted in a media server. An RMAN backup was taken then, on tape, using HP Data Protector. The

  • Itunes is running but will not open after most recent 9.1 update w/Bonjour

    I recently loaded the most recent update for Itunes 9.1 version on 3/31. Since then, I have not been able to open my Itunes. I think it might be related to Bonjour because I see that it was added during my most recent update and I have never had it o