Auto-Answer Option

I have always wondered wht the Thunderbolt does not have an auto-answer option. I happen to be helping an employee with his Droid 3 (he upgraded from a basic phone) and noticed that it was a setting on that phone. I was hoping that with the all the updates that this phone has gotten (some that did not work out that well), that it would have been included in one of the updates. I am not complaining, but it would be nice to be able to answer a call (while in the car) and actually do it "handsfree". As of right now you have to press the button on your earpiece to answer a call if you are using a bluetooth earpiece.

I can give another use case for this. Right now, I work remotely for my company. To facilitate better communication, we keep an iPad at my old desk and I video conference in for most of the day. Its great because people can come up and chat iwth me or ask questions just like they normally would. When its meeting time, folks just grab the iPad and take me with them.
The biggest obstacle I have is getting on in the morning or getting back on when the network drops. I always have to have someone on hand to answer my call. If Skype for iPad had auto-answer, it would save me a lot of headaches, since I'd be able to call into the iPad at anytime without someone else around to answer.
Hope this helps!

Similar Messages

Auto-answer on Samsung TV?

My Nan currently has a
ASUS Videophone Touch AiGuru SV1T set to automatically answer video calls.
I can't find an auto-answer option on the Skype app for her new Samsung TV.
Does anyone know how to set the tv to auto-answer? It's a really useful option for elderly relatives who struggle with buttons/remote controls.
Many thanks.

auto-answer can definitely be set in the settings of the Skype app that is built into the Logitech TV Cam HD
unfortunately I am not near where mine is installed so I cannot give exact clicks to get to where it is configured
Regards,
Neil

Auto answer setting in iphone 3G

I ride a motorbike and have a bluetooth system to my helmet. I have the phone in the back of the bike or in my pocket. Phone rings but I can't answer it because of where the phone is located. I know with the other phones i have had in the past they had a setting to auto answer the phone after 3 rings when connected to a bluetooth headset. Is this possible running 3.0 on the iphone.
I realy don't want to have to purchase any more equipment to get this to work.

Short answer: Regrettably, not from the iPhone itself. There are a couple Bluetooth earpieces that have an auto answer option and will work with the iPhone (Cardo S-800, some BlueAnt models). I have tried both, but have found them not to fit well with my ear, so I keep on using a Nokia 6300 and Jabra BT 5020.
I have numerous times asked Apple to include auto answer as an option on the iPhone (through http://www.apple.com/support/feedback/), but without tangible results. I would suggest that any who wish this feature also ask for it through the above mechanism. Perhaps numerous requests will bring results.

DEACTIVATING AUTO ANSWER ON BLUE TOOTH DEVICE

I have a BB Q10 and I use a JABRA BT2045 Bluetooth headset. I was able to set the device to answer call after 5 seconds. The issue now is that I want to turn off the auto answer option but I am unable to get the settings to turn off this option.
Can someone help me. My current Software release is 10.2.0.424 amd the model number of my phone is SQN100-3.

ikogiemudia wrote:
I have a BB Q10 and I use a JABRA BT2045 Bluetooth headset. I was able to set the device to answer call after 5 seconds. The issue now is that I want to turn off the auto answer option but I am unable to get the settings to turn off this option.
Can someone help me. My current Software release is 10.2.0.424 amd the model number of my phone is SQN100-3.
Open the phone app. Swipe down in the app and select the settings icon from the top menu. Select Bluetooth. Toggle the setting here.

Batch handle with 'Auto Select' option

Hello Everyone!
We are trying to find out how the 'Auto Select' button works with batch handle.
Our customer wants to handle batches by FIFO.
We need to try if it is possible to 'Auto Select' batches by 'Admission Date'. Even when we found out that it is possible SBO does not do it rightly, because not always get well organized by 'Admission Date'.
Somebody knows which logic uses the 'Auto Select' option to select batches?
There is some configuration at SBO to handle batches by 'Admission Date'?
Thanks a lot!

The batch auto selection selects the batches according to the ascending alphanumeric order. To issue based on FIFO method, user has to identify the admission date/ manufacturing date of the batch and issue.
There is No configuration at SBO to handle batches by 'Admission Date'.
As a workaround you can use the batches to startwith 'Admission Date'.

Auto complete option in CRM 2007 Web Client

Dear Experts,
Like how we open certain web pages and find the user name automatically apprearing (auto complete option) when you enter the first letter. This option can be enabled by doing the settings in Internet explorer tools - content - autocomplete option.
Similarly the client requires autocomplete option to be enabled for CRM 2007 Webclient. Though we have enabled autocomplete settings briefed above, its not working in webclient.
Can you please let me know the procedure to get the autocomplete option of previous entries as a drop down while trying to create /reenter the data.
Answers resolving the query will be rewarded.
Regards...
George Zacharia.

Hi Gerogee,
Did you get a way to implement this?
I've a similar requirement.
Please let me know.
Thanks,
gyan.

Auto GR option

Hi ,
In the production scheduling profile - OPKP, Automatic goods receipt option is availalbe, but in process order scheduling profile - CORY auto GR option is not available, may i know the reason?

Hi Ganesh,
Auto Goods receipt (Control Key with auto GR - PP03/PI03) will not support in case of Co-Product Scenario.
You have to do manual GR for both Header Material and Co- Product using MB31 or MIGO.
Refer Below Link,
[Goods Recipt with Co Product|http://help.sap.com/saphelp_erp2004/helpdata/en/b1/c04d01439a11d189410000e829fbbd/content.htm]
Regards,
Dhaval

Auto answer after a few rings?

I use to have a phone that had the autoanswering option in the setting while hooked to a headset. It would be very convenient on the IPhone cause I have a telecom system for my motorcycle and i'd like my IPhone to auto answer after a few rings.
Any idea how-to do that if possible?
Thanks.

It's not possible. that's not a feature of the iPhone OS.

Nokia 700 and auto answer / handsfree kit function...

Can this phone auto answer, at all? This is for in-car use, when external power is connected continuously. With previous Nokia phones (I have the E51) the Tektronic Car Pack does all that, very well, but the company seems to have died. I cannot see any config in the phone. Could a 3rd party cluetooth-connected car kit make it work that way? The 700 user manual is near-useless - just states the obvious for each config item

you need to set "automatic answer" option to "on" from accessories settings menu from phone's settings

BB Flip External Display and Auto Answer

Hi,
I've only had this phone for 2 wks and I'm already having an issue--for some reason the external display won't display incoming calls and once I flip it open it automatically answers. I couldn't find the option on the phone that would allow me to at least turn off the Auto answer. Does anyone know how to fix this problem?
Solved!
Go to Solution.

Press the green phone key. Then press the menu key and select Options. Next select General Options and finally change the auto-answer to the desired option.

How can i set Messages to auto answer video chats?

I used to be able to have iMessages and iChat auto-answer incoming video chat/calls. I use this to communicate with staff who may not be able to quickly accept the incoming event.

Hi,
The AppleScript for this is still there.
It can be set in Messages Menu > Preference > General Section in the bottom drop down.
The Sound/alerts pane has gone in Mavericks and sound can now only be changed for "Messages Received".
Although I must admit to not trying it I have presumed the AppleScript would then only work for Text Invites.
Having said that the AppleScript should be able to run as a separate even like an App from the Dock.
The Drop Down in Messages has an Option to Show In Finder effectively.
9:47 pm Saturday; January 11, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Auto-Save-Option with increasing filenames (counter, timestamp eg.)

Hello!
I want to pdf a job of 30.000 single printer pages, which are generated by a computer programme.
I'm able to choose the Autos-Save-Option by setting a dedicated folder at the printer settings. But there ist no option to install an increasing filename (counter, timestamp eg.). For that reason Acrobat overwrites the previous file each time (30.000x).
In some freeware-tools this funktion is implemented. Where or in which version can I find this funktion in Adobe Acrobat?
Thank you for your help.
Greetings from Germany!

Hi, HiddenMist,
Following the suggestion, I have removed all information I can remove. I have set all settings to "contacts only" that can be set to such. I cannot change my avatar because I cannot save changes (without adding my last name, which is currently blank). I have left everything blank that I can leave blank. I have been contacted three times after I have made these changes, as suggested.
In the Windows Desktop version of the Skype software, I can navigate to my profile settings: Skype -> Profile -> Edit your profile.
My work-around still works ... for me, at least, which is why I continue to recommend it.
Hi, Bartholomue, and welcome to the community,
Did you know that if you look up how to delete your name from the Skype directory, it says that you are effectively disabling your account? Your name will not show up in searches, and it will remain in the contact lists of those who have already added you, but those contacts will no longer be able to call you.
Yes, indeed, this is true.
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How to set auto delete option for old messages

Hi All,
Can any one help me on how to set auto delete option for mails older than 15 days from my Z10.
James Kurian

There is no such option in BB 10.
However, you can achieve a similar result by setting your email sync timeframe to 14 days (the closest option).
If you are using an ActiveSync account (such as Hotmail, Outlook.com), go to Settings > Accounts > select the account. Tap advanced at the bottom of the screen. Scroll to the very bottom, tap Sync Timeframe and set to 14 days.
If you are using an IMAP account (such as Gmail or GMX), you will have to delete, then re-add your account. The Sync Time frame is only avaialble during setup for these accounts. When adding, tap advanced at the bottom of the screen and set the Sync Timeframe.
Hope this helps.

No "Auto Extend" option for tablespace files in sqldeveloper 4.0

In Create Tablespace > File specification tab there is no “Auto Extend” option anymore in sql developer 4.0 (still present in 3.2). Maybe someone knows how to enable it if I missed something in configuration?
Here is an illustration:
http://i.piccy.info/i9/7c8d7a842786c5e2d07fb07464948813/1387918107/43886/670008/screen_14.png
Thanks.

Oh, really? Before rising this question I tried to search everywhere and did not find any mention of this defect. Thank you for confirm this.

How to enable Auto Complete option in SAP

Hello Guru,
i want to enable my auto complete option in my system so as to get the past transaction or any codes quickly by pressing SPACEBAR, all other systems have this feature, they just by pressing spacebar get their TCodes or any inputs instead of typing the whole.
i also tried by getting into customizing layout in SAP system and turned on its history, but still its not coming. what may be the reason???.
all my colleagues have this feature in their system. and even after changing their setting its coming
pls revert asap, as i will not waste my time in writing the whole Tcodes.

Jigar,
SAP calls this 'Local Data', it is a function of your GUI settings and not of SAP config.
Open an SAP session using the gui. I am using gui 7.2, the location of this command has changed a bit over the various GUI versions, but I will get you into the general area. On the top icon bar, select the colorful icon on the right > options. Find Local Data (either a tab or a menu item). Under History, select 'On'. Make any other settings that meet your fancy. Then, Apply > OK.
Log off, then log on. Your local data should now be enabled.
Best Regards,
DB49

Auto-Answer Option

Similar Messages

Maybe you are looking for