Auto backout when installing itunes on a win 8.1 system

I've uninstalled iTunes and quicktime following a failed update.  When reinstalling iTunes (win 64bit) I get an automatic back out folloing the  file copy process.  They both worked fine before the failed update.  Any ideas to complete the reinstall?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • How do you install iTunes 7 in Win XP

    I dont have access to an Admin account on my computer, but want to upgrade my iTunes 6 to 7. I ran the installer in Safe Mode, but it failed when it tried to start the ipodservice... i retried 3-4 times, but it did not work and I had to cancel the installation, but i ended up with an updated Quick Time and iTunes 6.
    Does anyone know how to install iTunes 7 in Win XP? I could really use some help.
    Thanks

    i have the exact same problem
    i know why but i can't fix it
    ===
    when i had itunes 6 installed, i disabled/remove the ipodservice b/c i don't have an ipod
    when ipod 7 tried to install it removed the old ipodservice but the when it tried to install the new one, it could not b/c it had previously been disabled.
    i can't figure it out though...
    it has nothing to do with admin priviledges, it just has something to do with having the ipodservice disabled or banned from running on your system
    at least, that's what i think happened.

  • When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"

    When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services".  I don't know what this means and I do not know how to resolve it.  Can you advise please?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
    iTunes 11.1.4 for Windows- Tips for Unable to install or open

  • Error Message when Installing Itunes 9.0.1

    When Installing Itunes 9.0.1 I received the following error message
    "The systetm extension "/System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product'svendor for an update.
    I don't know anything about this extension and would like some help finding out if I even need it.

    Sean,
    Yes, this is a known defect:  CSCue69477 - CTI Route Port Synch Issue with CUCM.  As per the bug: 
    "This issue will occur if the "SUBSCRIBE Calling Search Space" under Protocol Specific Information in the Template for the CTI Route Ports is configured. To work around this, the "Owner User ID" under Device Information for the Template needs to be configured."
    Regards,
    Jason

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT1926 "the feature you are trying to use is  on  a network resource" message error when installing itunes

    "the feature you are trying to use is  on  a network resource"  is the message error I received when installing itunes.  I downloaded the file and saved it.  The same thing happended when I simply ran it as well.

    Hello, uclan1.
    This article will help you with the error that you are receiving. 
    "The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H. 

  • When installing iTunes 11.02 I get an error message.

    When installing iTunes 11.02 I get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." What is the suggested soloution ?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing iTunes 10 I get an error message "Invalid Drive: F:|". ANy advice?

    All I want to do is upgrade from 9 to 10 so that I can run my ipad.
    When installing iTunes 10 I get an error message "Invalid Drive: F:|". ANy advice?

    Bissley,
    I have received this error in the past and it is usually caused by Windows automatically changing your external drive letters when you install. There are two ways around it; first, follow the directions provided by b noir. Second, within iTunes go to Edit > Preferences > Advanced
    Under the advanced options you'll see a recessed section called "iTunes Media folder location". Although you may have set this in the past it, if Windows changed your drive letters it will no longer be valid. Default is usually "C:\blah\blah\mymusic"
    Changing it just a matter of clicking "change" and finding your music folder again or change your drive letter back (if it changed at all).
    If Windows is changing your drive letters, it is best to set them yourself so that everytime you plug in the devices they use the letter you assigned. Here is a link for that process:
    http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-le tter
    Hope it helps.

  • What to do when installing itunes to windows vista home basic an message appears saying"there is a problem with this windows installer package.A program run as part of the setup did not finish as expected.Contact your support personnel or package vendor."

    what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
    "There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
    Need to know because this is driving me nuts now!

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing itunes on PC with Windows Vista, the itunes program "took over" all of my desktop icons.

    When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons.  How can I install it so it doesn't do that?  Thanks!

    You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.

  • When I installed iTunes 11 on a windows 8 system I get the music, but the screen dosn't have te library on the left.  The left side of iTunes is the name.  I got the songs by using a external hard drive.  What have I done wrong?

    When I installed iTunes 11 on a Windows 8 system the installation did not seem to work correctly.  There is no sidebar and no ribbon w/ File, Edit, etc.  I tried to use an external hard drive to move from an older computer using XP to the new one w/ Wdw 8.  I thought if I deleted iTunes from the Wdw 8, I could reload it. Apparently I did not delete the music files because they appeared in the format I complained about, no side bar or ribbon.  Can anyone walk me through the process of deleting everything and reinstalling?  I am not very computer savy so a step by step would really be appreciated.
    Thank you,

    ctrl B - Show menus
    ctrl S - Show sidebar

  • When installing itunes 10.7 my computer gets all the way to verifying install and then removing applications and stops.  I get a message that says "unable to complete - there is a file missing.  I tunes has not be completed.  See your package dealer

    I am trying to install iTunes 10.7.  The installation gets all the way to the end and says "removing application" then stops and gives me an error message that states there is a missing file and it cannot complete the configuration.  Please contact my support or package dealer."
    Confused - my old itunes worked fine - haven't removed any programs, etc.,
    Help

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing itunes on windows 7 i get and error, is there a way to fix this?

    I need help. the title pritty much explains it all. I run the setup and select my destination folder, then click install. down the bottem it tells what it is installing. it stops at 'installing apple software update'. it then comes up with a screen saying 'itunes insallation is done. errors acured durin installation. click finish to exit.'

    Although you're getting a different error message, perhaps try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Maybe you are looking for