Auto batch Selection in MB1B

Hi All,
We want Auto Batch selection on FIFO Basis while transfering the Material to Sub Contracting Vendor through TCode MB1B.
Thanks in Advance........
Sanjay

Hi,
I'm addin to Mr. Jürgen L. input. once you will put * and execute system will brin all live batches with quantity and will do the spliting of it also. but it will not in FIFO based.
So Lets try this and see how system behave
1. Do the setting on 541 movment in "Logistics - General-> Batch Management-> Batch Determination and Batch Check->Batch Search Procedure Allocation and Check Activation->Allocate IM Search Procedure/Activate Check" Here allocate your IM seach procedure & put check batch tick on.
2. maintain the batch serch strategy in MBC1 with the ME01 or if you are having any customized condition type then maintain for it.
now try MB1B
Rgds
S

Similar Messages

  • Auto Batch selection during GI for Process order

    Hi Gurus
    My requirement is that the system should select available batches of raw materials automatically during goods movement for Process order using COR6 and Goods issue for order MB1A . Could any body plz let me know the procedure in detail

    Dear,
    You need to define the batch search procedure MBC1 with serach strategy as ME01 for your material plant and movement type assign selection condition and sort rule and save the condition record.
    Please refer this thread for details,
    BATCH SELECTION DURING ISSUE
    Please come back if any problem.
    Regards,
    R.Brahmankar

  • Auto batch detmn for components in Process Order selects batch in Q status.

    Hi Gurus,
    We have the following issue with automatic batch determination for component batches for a Process Order:
    Say for a Process Order it requires components A,B, and C.
    The issue is with component C. if the PO requires 100 Qty of C. the system is picking batch X having 80 qty  and picking 20 from another batch Y which is still in u201CQu201D status (due to some defects it is not cleared .  for which inspection should have completed 3 days before Process Order is released).
    Also there are only these two batches for this component in MMBE.
    What I understand is system adds GR date + GR processing days ( for inspection) and release component for production after that (ie., moves to Un restricted stock). Therefore system selects this batch as per the availability check (by calculating the GR+ GR processing date) even thoe it is not cleared yet.
    Also, I want to know If this is correct procedure, how can we make system to not to include batch with Q stock (batch which is having some defects).
    Thanks,
    N.

    Hi
    Use separate Checking Group(Availability Check) in MRP-3 view for comp C with the settings in OPJJ(Availability Check+Checking rule combination) with untick incl.quality insp stock. Idea is to select the un-restricted batch stock qty during Auto Batch determination for Components
    Regards
    Brahmaji

  • Unable to determine Auto batch

    Hi Gurus,
    My user is doing STO scenario,
    He created P.O after that he done Vl10b and now he is doing delivery,
    At this point user wants batch to be determine automatically.
    I have maintained auto batch tick for the batch item category.
    I have checked the stock for that material also, But still i am unable to determine auto batch for that material.
    So please suggest me what setting need to be done to determine auto batch for this scenario.
    Thanks and Regards
    Subramanyam.N

    Hi Subramanyam,
    Please check configuration steps for automatic Batch determination in delivery,As its very difficult to tell wht might be missing so i hope this will help you to resolve your issue.
    To trigger the batch number in the delivery document automatically we need to do necessary configuration and master data maintenance.
    1.Batch management works on condition technique, menu path: SPRO à Logistics General à Batch management à Batch determination and Batch check. Here we need to create new strategy types if necessary and access sequence if necessary, and also batch search procedure if necessary
    2.Allocate the SD batch search procedure using the menu path: SPRO à Logistics General à Batch management à Batch determination and Batch check à Batch Search Procedure Allocation and check activation à Allocate SD search procedure/Activate check. 
    3.Activate Automatic Batch Determination in SD using menu path: SPRO à Logistics General à Batch management à Batch determination and Batch check à Activate Automatic Batch Determination in SD. Here we have two options, 1. To activate batch determination for sales order item and 2. is to activate batch determination for delivery item, upon the requirement we can activate at both the places, But in general batch are activated only at delivery item level. 
    4.If we need shelf life expiration date for the batch we need to create a class using u201Ct code: CL01u201D, type in a name for the class and select the class type as u201C023 u2013 Batchu201D and maintain the characteristics as LOBM_VFDAT and LOBM_HSDAT (this for production).  
    5.Once the class is created go to material master under classification tab and maintain the class created.  
    6.One more important setting in the material master is to check the batch management. This need to be done before you process the material for orders. 
    7.Go to create batches for materials using t code: MSC1N or menu path: SAP Easy Access à Logistics à Central Functions à Batch Management à Batch à Create/change/display. You can create new batches for the materials and also maintain the Shelf life expiration date (SLED) in the batch master.  
    8.so as to determine the batch automatically we need to maintain a condition record for batch search strategy type using t code: VCH1 or menu path: SAP Easy Access à Logistics à Central Functions à Batch Management à Batch Determination à Batch Search Strategy à for sales and distribution à create/change/display. During the maintenance, maintain the class also in the condition record.  
    These steps will automatically trigger batch management during delivery processing. System will allot the batch automatically upon the availability of the stock in the batch.
    Regards,
    Pavan

  • Batch Selection config. in Excise Invoice Creation (J1IJ) at Depot in CIN

    Hi,
    In the business scenario that I have to map in SAP system stock transfer occurs from Plant to Depot. Then the batch is split at the Depot and minor changes are made to characteristic. These individual small batches and then sold to the end customer from depot.
    <b>Problem:</b> If the batch number is kept the same at depot as the incoming batch number, system is able to find the incoming invoice in J1IJ. If the batch number is changed (to mark individual characteristic) then the system in not able to idetify the incoming batch.
    Please help...
    In SAP help link http://help.sap.com/erp2005_ehp_02/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm I could find mention that "You can also automate this procedure, using the batch selection program (J_1IJCHK), by making the appropriate Customizing settings in the Country Version India (CIN) Implementation Guide (IMG)." Can anyone help by elobarinting what specific configuration is to be made for batch selection?
    Thanks
    Rajat

    Hi,
    SAP has released a SAP note 1001446 which can be implemented for your requirement. There is an user exit J_1I7_USEREXIT_BATCH_CHK_FLAG which has the parameter NO_BATCH_CHK_FLAG. If you pass the value ' X' to the parameter NO_BATCH_CHK_FLAG then the batches will not be  checked during J1ij. you can implement this user exit through SE37.
    Regards,
    Murali

  • Same batch selected in two different Deliveries

    Dear all
    I have a problem in Outbound delivery creation..
    I have created 2 different outbound deliveries. While creating & Batch determination of first outbound delivery  Batch number X with qty 100 is selected. Then it is saved with out PGI.
    when i create the second outbound delivery also the same batch number X with qty 100 is selected. Actually it should not happen. Because i have total stock of Batch no X is only 100.
    Please guide me how to solve this issue.
    Regards
    Bala

    you might have selected bacth but not completed picking thats why system allowed another batch selection with same quantity. pIcking reserves the quantity. Hope this will help you.
    Thanks & Regards
    Amit

  • How to auto populte selection screen for variant maintained in User Profile

    Hi,
    I have to auto populate selection screen of Custom Report , with the variant maintained in User profile of User .
    Helpful answers would be awarded .
    Thanks
    Umesh

    Hi,
    use the PARAMETER-ID clausole of the PARAMETERS / SELECT-OPTIONS instructions.
    See help for more informations.
    You have to know the parameter id of the field and also the parameters, must be tight to the right data element (example : parameters : p_mara like mara-matnr and NOT parameters : p_mara(18) ).
    Otherwise, use "get parameter id" in the initialization event to populate the selection screen.
    Bye
    Andrea

  • Auto batch pick in 201 movement type

    hello all,
    i want to pick batch automatically when we issue the goods to costcenter 201 movement type.
    we already have 4 plants in which auto batch determination is already there.when we enter the * in batch field,batch is automatically picked.
    all the plants have same configuration but only for one plant automatic batch determination for movemeny type 201 is not picked.
    regards
    sumit

    Hi,
    movement type also import for same
    check following link
    [http://forums.sdn.sap.com/thread.jspa?messageID=5907502#5907502]
    Regards
    Kailas Ugale

  • Always Use Primary Line / Auto Line Select CM 4.1(3)sr3c

    Is it correct that the "Always Use Primary Line" system parameter and the phone device page "Auto Line Select" setting work together to affect a phone's off-hook behavior for incoming calls? I changed the Always Use Primary Line from the default (False to True) to change the behavior and force primary line only when the phone goes off-hook. When I then enabled Auto Line Select on the 7960G, I expected to reverse this global setting for that device only. But, that did not happen. In fact, no matter how Always Use Primary Line is set (True or False), the device page setting Auto Line Select (enable or disable) does not appear to cause any change at all. Has anyone else encountered this? If changing the Service Parameter takes effect without restarting callmanagers, wouldn't resetting the phone device force the change on the device page to take effect? Or, do I not understand the relationship between these two settings?

    Auto Line Select comes into play when you are already on the phone and you have a new incoming call on another line, then should the focus change to that new ringing line so it can show you the caller-id or should the focus be on the active line. Depending on this, the softkeys and everything change on your screen and you don't have to press the line button to see all the keys.
    Always use Prime Line is primary used when the phone goes off-hook. This determines if you want to go off-hook on the primary line all the time or not. If you choose to always use primary line, then everytime you go
    off-hook, we use the first line on the phone and it does not matter if there is a call ringing on another line.
    If its set to false, then when you go off-hook, it will go off hook on a line which is ringing and not your primary line.

  • VL01N deactive Auto batch determination

    Hi experts,
    i need to deactive the mark Auto batch determination (TVLP-CHAUT or TVAP-CHAUT) for plant that doesn't have WMS when the transaction VL01N is executed.
    With user exit or BADI can be used to change this field TVLP-CHAUT? I haven't found a BADI or exit than contains this field.
    thanks in advance,
    Alejandro

    may be in MV50AFZZ
    FORM userexit_batch_determination.
    endform.

  • Auto Batch Determination For Stock Transport Order/Replenishment Delivery

    All,
    I have an issue with my stock replenishment deliveries (STPO, Stock Transfer Plant to Plant via standard MRP/Procurement process with a Purchase Order that is a Stock Transport Order).
    One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD.
    I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
    Thanks,
    Jeremy

    Hi Jeremy,
    you need to configure batch determination in SD and maintain enteries in the trasaction code V/C5 as below
    Sales org + Distribution channel + Division + DL (in salesDoc Ty) + Search procedure + tick check batch
    Sales org + Distribution channel + Division + NL (in salesDoc Ty) + Search procedure + tick check batch
    also check whether the delivery item category is active for auto. batch determination and maintain the batch condition record in transaction code VCH1
    regards,
    Santosh

  • Auto batch determination from PO to Delivery

    Hi,
    I have created a PO and entered the Batch manually.  While creating the delivery for the PO the batch is automatically determining.  But the delivery doc has imcompletion because of batch determination check error noticed.  After I deleted the batch in PO while creating the delivery again the batch is determined and dely doc also no incompletion found. Please anyone let me know what is the like between PO and delivery doc of  auto batch determination.

    Hi,
    What you are referring to looks like a stock transfer process. Batch is determined automatically based on the Batch search strategy defined. It can be checked in transaction VCH3.
    Ensure that the stock transfer quantity is available in the supplying plant and the batch qty is available in unrestricted use.
    Regards,
    Sushant

  • Batch selection as per expiry date

    Hi,
    Please have alook at my requirement and suggest the possible solution.
    We have raw material which is handles in batches. Let's say a raw material has three batch in the stock M1, M2 and M3.
    M1 expiry date is on march10,  M1 expiry date is on april10,  M1 expiry date is on June 10.
    So when i create a process order system should always pick a batch for which expiry date is close. That is it should select batch M1.
    Please let me know if it is possible.
    Thanks,
    Dutta

    Hi Debasish,
    Please follow the given below link. I hope this will serve your purpose.
    Re: BATCH SELECTION DURING ISSUE
    Regards,Kundan

  • Auto Batch generation during the Goods Movemnt

    Dear All MM Experts,
    while posting the stock from the UD of QM lot by 321 movement to unrestricted use from Q.I. system is generating the new batch in the numeric number.
    we have batch management active to the material and since the original batch is with the QM lot system is generating a new batch in background and posting the stock of the original batch to the new numeric number.
    EX - material A
    batch B
    now after psoting the stock from QM lot system posts the stock like
    STOCK OVERVIEW
    UNREST USE                                     Q.I
    Material A
    000001 - (NEW BATCH )  01EA
    B         - ORIGINAL BATCH
    i think now its easy to understand for you from the example.
    What is going wrong?
    kindly suggest,
    Regards,
    Anil

    Dear All,
    Can any body please help ?
    here pl find the details of the problem when the stock is being posted to blocked from QI (by 349 movement) from UD. and when i post to unrestricted use system is creating a new btch which should not be.
    Enter Receivg. batch
    Message no. M7018
    Diagnosis
    You have not entered a value in field "Receivg. batch" although an entry in this field is mandatory.
    System Response
    The system cannot continue processing.
    Procedure
    Enter a value in field "Receivg. batch" or press F4 (possible entries).
    Note:
    If the storage location or batch is missing it may be possible to enter * in the field and branch into the storage location/ batch selection list. You can find out whether this function is defined for this field via the F1 help.
    kindly help.
    Regards,
    Anil

  • After updating iOS5 time zone is wrong when auto is selected. Neither FaceTime, iMessage nor YouTube app are working.

    After updating to iOS 5 cannot activate FaceTime nor iMessage on my iPad 2. I find that my time zone is wrong, when auto is selected. YouTube app continuously say "cannot connect YouTube" so is unusable.
    I've already used all this features/apps with the previous OS but not now.

    Thanks kat729, I tried everything and only restoring my iPad corrected this issue. Now all Apps are working properly.

Maybe you are looking for