Auto batch split and auto batch determination

Hi Experts,
I want to know what are the settings for automatic batch splitting and automatic batch determination?
Thanks in advance,
Jyoti

For automtatic batch determination assign the search strategy with batch check indicator in OPL8 transaction for order types. And in transaction OPJ2 enable the indicator BD (batch determination) for order type.
Batch splits can only be triggered manually in the production order. For this the material master record of the material must specify that the material is managed in batches and batches must exist for the material. You can split the batches in order from change mode by selecting the opeartions and go to split the batch..you will get the pop-up for all existing batches then here you can assign the quantities for the operation from batches and save.
No automatic batch splits in production orders.
If helps rewards points.
Regards
TAJUDDIN

Similar Messages

IQ09 - Different process for material with bacth Split and no Batch

Hello,
i want to know if IQ09 treats material with batch number and no batch in the same way for fetching the serial number.
view V_EQUI_EQBS_SML is used to fetch the serial numbers.
i just need to confirm if the process is same in case a material has batch & no Batch together.
Thanks
Renu

Hi,
We faced the same problem and went back to option:
Cont.Ins Lot creation (QMAT-CHG) = "For each Material Document item
This solves the problem and was in our case the solution for receipts from production. But at goods receipt for purchase orders we still use the option for each material document, batch and SL.
There we pick up the materials in WM by hand by scanning the bar codes on the pallets (printed at GR). The transfer order creates a negative quant in unrestricted use that is later filled by the automatic usage decision that moves the stock from quality to unrestricted in the same bin.
Hope this helps.....
Arno

Batch ID and sub-batch ID concept

Hi,
Can anyone tell me that in ODI Batch ID and sub-batch ID concept is availabe. If avaiable then, how we will perform.

Hi,
What do you mean with BATCH ID and sub-batch ID?

Auto pick release and auto ship confirm in 11.0.3

Hi All,
Anybody having sample code to do auto pick release and auto ship confirm process in 11.0.3?
Any suggestions please.
Thanks & Regards,
Gowri

Set hold until date to the order lines and run the auto release concurrent program.
Thanks / Bhaskar Akkala

Batch split and picking via interface

We have a set-up where we receive picking confirmations from an external system, via an IDOC (type DELVRY01). The picking strategy is SD picking w/o transfer orders, so we update picked batches directly into the delivery, with the picked quantity.
However we have an issue if the delivery quantity is 30 CAR ex. and we receive a picking confirmation for 30 CAR or more. I this case the batch is updated on the delivery main item. If the picking confirmation was for 29 CAR or less, it is updated as a batch split item. The issue is that if the 1. picking confirmation is eaqual or higher than the delivery quantity, the main item is updated. It is then not possible to receive more picking confirmations for that item.
What we would like is to force creation of batch split items, regardless of the picking quantity. Any ideas for user-exits/BAdI or customising settings are welcome.

I have found a solution to this using user-exit EXIT_SAPLV55K_002. If you receive a picking confirmation for an item where the quantity is equal or creater than the delivery quantity, you can add an extra record to table T_KOPO in the user-exit, only containing the delivery number and item number. This will then generate the picking confirmation as a batch-split item.

BAPI's for Batch Split and Update Picking Quantity

HI All,
I have the delivery details(along with batch number, MATNR etc), now i need to split the batch for picking.
and then i need to sum the batch quantity and update this total quantity to the picking quantity and then update the delivery.
I tried to use this BAPI function module BAPI_INB_DELIVERY_CHANGE.
But i am unable to find the picking quantity field in this BAPI.
Any idea about how to split the batches using BAPI's??
and how to update the picking quantity using BAPI's?
Thanks in advance.
Vijay

Hi,
Can you share the solution for the above issue/
Regards

Auto Date field and Auto Number field

I am fairly new to this,
I have crated a form using the form wizard in Acrobat Pro 9.0 and I would like to make a field an Auto date field and another an Auto Numbering field. I have read a lot of the posts and there are a lot of recommendation to point the auto number to a database. This is fine but I do not know how to reference that field to an external database. PLEASE HELP!!!! Somebody GEEK me!!

I am fairly new to this,
I have crated a form using the form wizard in Acrobat Pro 9.0 and I would like to make a field an Auto date field and another an Auto Numbering field. I have read a lot of the posts and there are a lot of recommendation to point the auto number to a database. This is fine but I do not know how to reference that field to an external database. PLEASE HELP!!!! Somebody GEEK me!!

Analog of Auto Align Layers and Auto Blend Layers?

In Photoshop you can use Auto Align Layers then Auto Blend Layers to select the region that is in focus from each layer. How can I do the same thing in PSE 9? Thanks.

No, you really can't do focus stacking in PSE without a third party plug-in of some sort. This thread is about PSE 8, but it applies to PSE 9 as well:
http://forums.adobe.com/message/2514826

Use auto red-eye and auto c/a algorithms from RSP

I'm assuming that Michael J. and company are still associated w/ LightRoom, I'd like to see the auto red-eye fix and the auto c/a fix functionalty from RSP used in LightRoom. I find the manual red-eye fix tool in LightRoom difficult/unwieldy and the c/a remover does not do as good a job RSP did automatically (yes, I recognize it could be user error, but I'd still rather have the tool automatically make the attempt and let me fine tune if needed.)
Thanks,
Matt

You are correct, I misremembered about the red-eye removal (I must have been thinking of a different package.) The PF control may have been it, but whatever "it" was, it got rid of the PF as well as the c/a that is evident in other software (including LR.) So whatever it was, I'd like it back....

AC10 - Auto risk analysis and auto mitigation

Hi,
I was wondering if it is possible to
- run an automatic risk analysis at the end of an approval stage of the workflow, the same way it is possible to configure at the time of request sending?
- automatically put a mitigating control in the request for the risks found?
In our case, there is only one mitigating control for each risk and the assignment of the control is an unnecessary manual task to perform. The mitigation assignment will be approved in a seperate WF by the mitigation owner.
It seems there is no out of the box solution to this, so any alternative suggestions are welcome.
Thanks,
Daniela

Hi Daniela,
If I may give my opinion, I would probably break your question down into 2 parts.
1) Auto Risk analysis at the end of a stage - Making "Risk Analysis Mandatory" at that stage is probably the method. Unfortunately this does mean clicking one or two buttons (so not fully automated). Think AC uses this method to ensure the reviewer is aware of the conflicts caused etc.
2) Auto Mitigation - For a business access workflow in a 'Live' situation, this is probably not a good idea, as analysing and making the decision on whether to proceed with the request should really be performed by an actual person responsible for that stage in the work flow e.g. Role Owner or Security Lead etc. You would not want to mitigate all risks automatically (if I have understood correctly that you have a mitigation per risk ID). In theory, an automated mitigation process would mitigate all risks without discrimination.
On a side note, there is a configuration setting under SPRO for Access controls as follows
"Risk Analysis- Access Request : Param ID 1072 - Mitigation of critical risk required before approving the request". By enabling this configuration, you could force a mitigating control to be applied to any user requesting Critical Access.
Hope this helps.

CS5 - Why are Edit Auto Blend Layers (and Auto Align Layers) gray and not accessible?

I have CS5 and would like to try focus stacking. I File > Automate > Photomerge with a few photos. They have been aligned in layers. I would like to Auto Blend Layers but the function is gray and not accessible.
Thanks,
Mark

Thank you THANK YOU. As I was doing this I realized you asked me to show my selected layers. I haven't been doing that. I thought photoshop would blend all open layers. Thanks again.

Load auto fill? and auto post info when composing and e-mail

How do I load the Form auto fill function
How do I add a signature block that is automatically added when composing an e-mail?

Firefox doesn't do email, so it doesn't have a feature to autofill a signature.
If you are using Firefox to access a webmail portal, that feature would be provided by that portal's software. Usually part of HTML format email, or "rich text" email. See your webmail service provider's help files or support forum for help with that.

How do i stop Itunes auto creating playlists and auto playing imports?

HELP NEEDED - My PC crashed so i rebuilt with Windows 7, installed the latest itunes and so far so good. I then had to import my music library, first thing i noticed which it never did before, when i import folders it will automatically create a playlist for some of those imports, it doesn't create a playlist for every folder or album only some almost as if the smart playlist option is activated...how do i stop this happening? Second, when i import a folder Itunes autoplays the first song in each folder as it imports so it may play 2 seconds of a song or it may play a full song depending on the size of the folder, very annoying and because i have around 100 GB of music to import very very frustrating.
Thanks,
D

The current build of iTunes (10.4.1.10) appears to have a couple of issues with M3U playlists. The first is that when you import an M3U playlist, the list is created, and any files not already in the library it are added to it, but for some reason they just don't get added to the playlist. Secondly, when adding folders to the library, iTunes is also attempting to add any M3U playlists that it finds as well as any other valid media files not already in the library. The upshot is that iTunes may create a bunch of empty playlists corresponding to any M3U files you have scattered through your folders.
Use iTunes Folder Watch to scan your media folders for new files (and also for dead tracks) to avoid the issue. This is a more effective way of importing new media than simply adding in the entire media folder over and over again.
If you already have empty playlists you are struggling to delete manually then I've written a script for just that purpose called KillEmptyPlaylists.
As and when the time comes that you do want to import an M3U playlist then I have written another script to workaround the current difficulty called ImportM3U which does just what it says. It will also convert and add any WMA files present in the list on the fly whereas iTunes would normally ignore these.

Auto upgrade jre and auto retain java.policy

Hello,
I need to automatically update clients with jre 1.4.2_07 and also retain the existing java.policy from the previous version (1.4.2_04). I have the jre installation kicking off correctly (with IE and XP) using
codebase = "http://myserver/jinstall-1_4_2_07-windows-i586.cab#Version=1,4,2,70"
but I also need to use my existing java.policy before the rest of the applet loads.
I am not familiar with cab files, but is it possible to add a subsequent step to the jre install which would replace the generic java.policy with my specific java.policy? or any other way ??
Thanks, Sari

851004 wrote:
..It has been re-written from spec="1.0" to spec="1.5" ..Who changed it, and why?
..Does anybody else have an answer, solution, or suggestion ..?I suggest:
<ul>
<li>Change the spec. number back to something that 1.4 JWS claims to understand (i.e. "1.0").
<li>Checking the launch file using JaNeLA
</ul>
Edited by: Andrew Thompson on Apr 9, 2011 7:54 AM

Goods Receipt with auto bin placement and auto confirm?

Hi All
I have a need to putaway and confirm a goods receipt for stock items into 1 bin.
Therefore, at GR (MIGO) the goods are receipted and places into 1 bin and confirmed as putaway.
Is there some config I need to set up or a separate transaction to use.
Thanks in advance
Darren

Hi Darren
Is the single bin always the same based upon the material or the movement?
If it is material you can implement a fixed bin putaway, or if it is movement you can do the same
Both use config and master data
Steve

Auto batch split and auto batch determination

Similar Messages

Maybe you are looking for