Auto brighteness and reboot problem

When I set my XZ1 to auto brighteness and then switch my phone in standby and turn it on again I nearly can't see anything. All I can do is, hold the display in the sun and then to set the brighteness up.
My other problem is when I reboot my XZ1 it almost takes 2 min to reboot. I think this has something to do with the auto brighteness bug.!?
Would be great if anybody could help me
P.S cause there is unfortunately no german support forum and im from Germany I hope everybody understands what I mean. 

There is none yet. We are waiting for the next firmware update.
For now keep rebooting the phone until there is no delay between two logos (sony -> xperia), and everything will be fine. It can take several attempts, but this is everything we can do at the moment.
When everything have failed already, try to read the manual.
Kudos mean I am helpful. Am I for you? Then support me back

Similar Messages

  • Why does my iPhone arbitrarily brighten, to the point of decreased resolution, despite my having turned off auto-brightness and setting the brightness to maximum?

    Why does my iPhone arbitrarily brighten, to the point of decreased resolution, despite my having turned off auto-brightness and setting the brightness to maximum?

    Could be a hardware failure.
    Restore the iPhone, first from a backup, then as new, and see if the issue persists. If it persists when you restore as new, then there's a hardware issue with your phone and you need to bring it to an Apple store to be evaluated.
    ~Lyssa

  • Auto Brightness and Notification Sound Problems

    It seems after I upgraded to iOS6, my auto brightness as well as the "click" sound when I shut my smartcover is no longer working. Also, it seems as if my notification sounds are not working properly either.  I've checked my settings and everything is on as it should be. Oh, and I'm experiencing this on the new iPad 32GB. HELP!!!!

    I, too, am having difficult is with my Galaxy S6 contact specific message tone as well as vibration pattern. I have multiple LED colors for different items. I use the fingerprint for security and no issues there. Sure hope Verizon comes out with an answer soon. Don't like the Samsung message app, but may be forced to use it, so I can signify different vibrations/tones.

  • Auto-Brightness and Multitasking

    Hi,
    Auto Brightness does not seem to do anything? With the setting both off or on, the brightness stays constantly at the single setting chosen on the slider. Where is the ambient light sensor on the 4th gen, and does it even do anything?
    Also, multitasking doesnt seem to be efficient. Every program that is exited via using the home key remains in the task manager (double tap home). This seems like a pain as the user has to manually exit each program via this menu?
    Thanks for any comments.

    It is NOT a multi task bar. It is a recently used apps bar.
    All of those apps are NOT running, they have been recently used. You do not need to close them, as most apps do not run in the background.
    http://whenwillapple.com/blog/2010/04/19/iphone-os-4-multitasking-explained-agai n/

  • Nano 7 auto shutdown and reboots after playing videos?

    Hello,my nano 7 is very new, and i just tried to sync videos into it today. when i tried to play them, it would automatically shutdown and reboot.Anyone know how to solve this or have similar problems?

    Okydoky a new fascinating bug has been found!
    I now relabeld all songs with no album with a "no album" tag. I thought I could handle that way the problem with the "no album bug", well I thought. Now all the songs are shown in the display but I can't play all songs through because the player hangs up. When I select just one album to play through it works fine.
    *thumbs up* great mp3 player Apple! *thumbs up*
    Windows XP Pro

  • Computer, black Screen and reboot problem

    I have problems with my computer black screening and rebooting randomly recently. Tried a few things like downgrading the nvidia drivers and only using one monitorscreen.
    I was using version 347.52 but downgraded to 344.11 but still got the problem
    The times this happens can be anytime but happens most often while i'm playing games and at the moment i'm only playing on normal graphics while my graphics card should be well good enough to handle ultra graphics.
    I used this program "WhoCrashed" and got this crash report:
    On Sat 2015-02-21 18:29:08 GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022115-10420-01.dmp
    This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x91951C)
    Bugcheck code: 0x116 (0xFFFFFA8010DD3010, 0xFFFFF8800FE0151C, 0xFFFFFFFFC000009A, 0x4)
    Error: VIDEO_TDR_ERROR
    file path: C:\Windows\system32\drivers\nvlddmkm.sys
    product: NVIDIA Windows Kernel Mode Driver, Version 344.11
    company: NVIDIA Corporation
    description: NVIDIA Windows Kernel Mode Driver, Version 344.11
    Bug check description: This indicates that an attempt to reset the display driver and recover from a timeout failed.
    A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 344.11 , NVIDIA Corporation).
    Google query: NVIDIA Corporation VIDEO_TDR_ERROR
    SPECS
    Board: MSI Z97 Gaming 5
    Bios: Version 1.0
    VGA: MSI GeForce GTX 970 GAMING 4G
    PSU: Chieftec "CFT-650-14CS" (18a 12v rail)
    Intel Core i5-4690k Haswell 3.5GHz LGA 1150 88W
    MEM: Crucial Ballistix Sport 2x8GB 1600MHz!
    HDD: Samsung 256gb SSD
    COOLER: NH-U12P SE2 CPU Cooler
    OC: No overclock
    OS: Windows 7 64bit Professional

    I'm getting the same issue.  Only in games.
    On Sun 2/22/2015 1:32:14 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022115-7160-01.dmp
    This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x7A3F38)
    Bugcheck code: 0x116 (0xFFFFFA800DBEE010, 0xFFFFF880053E2F38, 0xFFFFFFFFC000009A, 0x4)
    Error: VIDEO_TDR_ERROR
    file path: C:\Windows\system32\drivers\nvlddmkm.sys
    product: NVIDIA Windows Kernel Mode Driver, Version 344.16
    company: NVIDIA Corporation
    description: NVIDIA Windows Kernel Mode Driver, Version 344.16
    Bug check description: This indicates that an attempt to reset the display driver and recover from a timeout failed.
    A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 344.16 , NVIDIA Corporation).
    Google query: NVIDIA Corporation VIDEO_TDR_ERROR
    Board: MSI Z97 Gaming 7 LGA 1150
    Bios: Version 1.8
    VGA:   MSI 970GTX TWIN FROZRV
    PSU:   Seasonic ATX12V/EPS12V 750 Power Supply (SSR-750RT)
    Intel Core i5-4690K Processor 3.5 GHz LGA 1150
    MEM: G.SKILL Ripsjaws X Series 8GB (2x4GB)
    HDD: Samsung 250G Evo Series SATA III Internal SSD
    COOLER: Corsair H100I Liquid Cooler
    OS: Windows 7 64bit Home Premium

  • Resolution, brightness and controlling problem

    I've recentrly adquired my Mac Mini and I don't know how to solve this problem. My TV it's a LEC 32" FullHD connected by HDMI. I'd never had any problem with my Playstation or any other device connected by HDMI with my TV. First of all, the words seems to be a little blurry, the brightness it's very high, and the automatic adjustment of the Mac to this TV it's clarely under 1080p. But when I select manually 1080p the words are still blurry, thw bright is still high and the only significant difference it's that everything look smaller XD.
    The other issue is that I can't control bright or sound from the keyboard, I'm forced to do this from the TV remote control. Please help me with these, or I will need to change it for a PC with Windows and I don't want that.

    HI, many Mini/HDMI issues...
    https://discussions.apple.com/thread/4472316?tstart=0
    But most of yours sound a bit like some settimg on the TV, does it have input controls for like PC/TV?

  • Shut down and Reboot problems

    Hi All
    I hope I can find help for my problem as it is getting really frustrating. I have Lenovo X230 tablet which used to run fine until it suddenly will not shut down or reboot. The screen will turn black however the small led lights on power and other button
    will remain on and the the laptop will remain like this until I press the power button to physically shut it down. When I tried to restore the system to an earlier point, the laptop will not reboot and I had to press the button again to shut it down and then
    power it up. It showed after that reboot was successful but to no avail. I tried to reboot it to even an earlier point (still I had to manually reboot it) but it failed. All drivers are up to date and I always install Windows updates as soon as they are out.
    Still I have to push the power button when I install new windows updates when reboot is required because the screen will go black as I already mentioned with the power still on. I do hope to get helo with this. 
    Thank you 
    Qas

    Hi,
    As this problem occures with no symptoms, in my opinion, it would be better to make system restore to revert your system to a former normal time point for test.
    If the problem persists after system resotre successfully, it would be better to contact Lenovo support to check Hardware problem.
    Roger Lu
    TechNet Community Support

  • KODI/XBMC auto run and script problems?

    I started a project a couple weeks ago to build a htpc using xbmc/kodi. I wanted to be able to play retro and steam games. So I've installed emulationstation and steam. Now comes the tricky part (for me anyways), writing bash scripts to access the programs through Advanced Program Launcher. Once I finally got that set up, I set the computer to login automatically and to auto run kodi. And here's where the issue happens. Normally when I run the simple script below, it closes kodi, and opens the program (so only one program is running at a time). However if I try to access the program from the auto-run instance of kodi, it doesn't close kodi before running. Instead, it opens the program and then opens another version of kodi. So if I press alt-tab it shows "kodi/emulationstation/kodi", so I have 3 programs open instead of 1 and trying to close any of them starts a cycle of new instances opening that causes a crash....
    #bin/bash
    killall -9 kodi.bin
    emulationstation
    kodi &
    So since everything runs fine when I start kodi by hand (icon and terminal), I'm assuming the problem is the way I'm auto starting the program? I've used the autostart section under the LXsession configuration, trying @kodi and @lxterminal -e kodi but both produce the same problem. Is there another/better way to autostart a program that I can do this? Or do you guys think it's an issue with the script?
    Thank in advance!!
    I'm running Arch 64 bit with the LXDE desktop.

    How do you autostart kodi ? By enabling the service ?
    In that case killing kodi would make it restart.

  • Macmini 10.9.1. itunes and  reboot problem

    I have  a macmini 2011
    I upgraded to mac os 10.9.1   2 days ago
    Yesterday , itunes was not able to launch.
    I decided to unistall tunes up. Believing it was an incompatibity problem betwwen the 2 software.
    After 4 hours , unistall not finish. And i did not found how to stop the uninstall program.
    Mac was refusing to shutdown.
    I finally did power off.
    And now , i have a white sçreen when i put the power on.
    Can somebody help me ?
    Dominique

    Thanks it did help
    I got first the message , not enough disk space
    Then i got the os x recovery panel and went into disk repair.
    It told me that he disk needed to be repaired.
    He told me the disk was successfully repaired..
    I then reboot , ...and then white screen again.
    I did reboot with recovery and white scren as well.
    Any ideas ?
    Thanks in advance
    Dominique

  • Safari, network, and reboot problem

    Hi,
    A few weeks back I went to the apple store to get my laptop fixed. My macbook which is one of the oldest one had a screen problem. The staff at the macbook store in lexington suggested I buy a package where they would fix and clean my laptop. Few weeks after getting it fixed, my Youtube stopped working. After going through discussions here in apple support I was able to get it fixed. Now my Safari and Firefox doesn't work. It says its not connected to the internet and every time I shutdown or restart, my laptop reboots itself automatically. The network connection is good because my siblings macbooks work perfectly fine. Even my other internet applications work good like skype, yahoo, and hotmail. messengers. Please help me out.

    Hello and welcome...
    Check the startup disk in case it needs repairing.
    Launch Disk Utility (Applications/Utilities) Select MacintoshHD in the panel on the left then select the FirstAid tab.
    Click: Verify Disk (not Verify Disk Permissions)
    If the startup disk needs repairing follow the instructions here for Using Disk Utility to Verify and Repair Disks
    Check Capacity and Available at the bottom of the Disk Utility window. Make sure there is at least 15% free disk space.
    Might try resetting the PRAM also, intructions here.
    Carolyn

  • Volume and rebooting problems

    I have a similar problem but my ipad volume turns off by it self I have to continue to push the volume button up while my device it study turning the device down also I cant reboot my ipad are go to the community to post my problems im using the desktop to post this need help bad I do not have apple care and ive had my ipad for about 2 years now

    ive reset all contents on  my ipad to

  • Auto login and password problems with Safari after OS 7.0.4 update?

    Hi all,
       I updated my IPad 4 to OS 7.0.4 , now Safari won't auto login to my favorite forums and won't remember my user names or pass words. I checked in Safari settings and Names/passwords and auto fill are on. Have restarted a number of times but no change. Any fixes?
       Thanks.

    Make sure Private Browsing is off.
    Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
    http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

  • Ipad air charging and rebooting problem plz help !!

    I have an ipad air 32g wifi and 3g ...
    i was using it and it ran out of battery and it shut down
    i connected it to the plug its not charging
    i tried to reboot by pressing down and holding the home and sleep button ....
    but there is nothing just dead !!!!
    What to do ?!

    1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air or new paint brush

  • System start and reboot problem

    Today when I first time I turned on my laptop it worked properly for 2to3 minutes and suddenly it became off and again I pressed the power button the same thing occured and when third time I started the system It was showing the window page with "start window normally" ,"start window in safe mode" etc .After that I pressed the enter on start window in safe mode and again the system became off displaying no error on screen the screen was displaying nothing. The system was working on the battery backup i.e.ac adapter was not inserted during all these activities. Now the problem is that when I turn on the system the LCD display nothing and the button CapsLog's LED remain continue to do on and off. Please provide me a immediate solution I'm working on a project on my system and it is on its completion stage.Is this problem related with hard disk.I do'nt want to format my system at any stage.

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g6-1302tx Notebook and Notebook does not turn on or seems to be frozen. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    Here is a link to computer won't start for Windows 7.
    Here is a link that will help you back up your Data.
    Please let me know how this goes.
    Thanks.

Maybe you are looking for