Auto Brightness and Notification Sound Problems

It seems after I upgraded to iOS6, my auto brightness as well as the "click" sound when I shut my smartcover is no longer working. Also, it seems as if my notification sounds are not working properly either. I've checked my settings and everything is on as it should be. Oh, and I'm experiencing this on the new iPad 32GB. HELP!!!!

I, too, am having difficult is with my Galaxy S6 contact specific message tone as well as vibration pattern. I have multiple LED colors for different items. I use the fingerprint for security and no issues there. Sure hope Verizon comes out with an answer soon. Don't like the Samsung message app, but may be forced to use it, so I can signify different vibrations/tones.

Similar Messages

Auto brighteness and reboot problem

When I set my XZ1 to auto brighteness and then switch my phone in standby and turn it on again I nearly can't see anything. All I can do is, hold the display in the sun and then to set the brighteness up.
My other problem is when I reboot my XZ1 it almost takes 2 min to reboot. I think this has something to do with the auto brighteness bug.!?
Would be great if anybody could help me
P.S cause there is unfortunately no german support forum and im from Germany I hope everybody understands what I mean.

There is none yet. We are waiting for the next firmware update.
For now keep rebooting the phone until there is no delay between two logos (sony -> xperia), and everything will be fine. It can take several attempts, but this is everything we can do at the moment.
When everything have failed already, try to read the manual.
Kudos mean I am helpful. Am I for you? Then support me back

Email freezes & all keyboard and notification sounds have disappeared

My Email freezes on a regular basis and the iPad has to be powered off and back on to unfreeze. Since the last iOS upgrade I've lost all keyboard and notification sounds although I can still play music etc.

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

When I plug my iphone 4s into the usb in my car, text and notifications sounds are gone.

When I plug my iphone 4s into the usb in my car, text and notifications sounds are gone. The phone only vibrates, no sound. The ringer works fine, and the music plays through the stereo system just fine. When I try to turn up the volume, the ringer shows on the screen, but it will not increase in volume. When I unplug the usb, everything works fine. I have tried different cords and different cars, all with the same result. This only happens in the car, when hooked up to the usb in the house or to the computer, everything works fine. When plugged into the car, the sound disappears. Any ideas?

See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

HT4623 I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine

I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine.It is quite strange as well. Have you encountered this issue before?If yes then what's the solution?

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Why does my iPhone arbitrarily brighten, to the point of decreased resolution, despite my having turned off auto-brightness and setting the brightness to maximum?

Why does my iPhone arbitrarily brighten, to the point of decreased resolution, despite my having turned off auto-brightness and setting the brightness to maximum?

Could be a hardware failure.
Restore the iPhone, first from a backup, then as new, and see if the issue persists. If it persists when you restore as new, then there's a hardware issue with your phone and you need to bring it to an Apple store to be evaluated.
~Lyssa

Iphone 6 notification sound problem ?

detail : iphone 6 [official no jailbreak] IOS 8.1
I do all reset setting / content it still not working all of system notification sound not working included [ call , sms , keyboard , log sound ......] hear nothing only vibrate
I know I know this maybe firmware problem how can i reinstall or downgrade 8.1-8.0
<Edited by Host>

LIMSRUNTEK wrote:
detail : iphone 6 [official no jailbreak] IOS 8.1
I do all reset setting / content it still not working all of system notification sound not working included [ call , sms , keyboard , log sound ......] hear nothing only vibrate
I know I know this maybe firmware problem how can i reinstall or downgrade 8.1-8.0
I face alot of problem with all version of ios that suck
if your product like that agian there will be no ios user it only android user
IF you only hear vibrate, then turn the switch up to ringer using the side control. You probably have it on silent or vibrate.
If you're using a case remove the case and make the swtich.

Auto-Brightness and Multitasking

Hi,
Auto Brightness does not seem to do anything? With the setting both off or on, the brightness stays constantly at the single setting chosen on the slider. Where is the ambient light sensor on the 4th gen, and does it even do anything?
Also, multitasking doesnt seem to be efficient. Every program that is exited via using the home key remains in the task manager (double tap home). This seems like a pain as the user has to manually exit each program via this menu?
Thanks for any comments.

It is NOT a multi task bar. It is a recently used apps bar.
All of those apps are NOT running, they have been recently used. You do not need to close them, as most apps do not run in the background.
http://whenwillapple.com/blog/2010/04/19/iphone-os-4-multitasking-explained-agai n/

Ringtone and notification sounds change randomly

this was posted awhile ago on the thunderbolt site but was never answered, seems it was posted in the thunderbolt forum, the Rezound I have changes to factory verizon ringtone and a different notification sound on its own, is anyone else having this issue, and is there a fix out there? thanks

I have also thought it might be related to the speed class of the SD card. When the phone boots up it has to mount the SD card. If the mounting is slower than when the phone searches for the ringtones, the phone reverts to stock tones.
I was occasionally seeing this on my Tbolt with the class 4 micro SD card that came with the phone. I haven't seen the issue since switching to a class 10 card.

S6 Notification Sound problems (anyone else having them?), and other ?s

First off, I love my new S6 and remain very happy as I get to know the ins and outs. However, I have come up with a few problems and I'm hoping others may know the answers (I cannot find anything online).
1. The biggest problem is that the different notifications for my contacts are not working. The sounds are on the phone and are selected from the list of possible sounds. However, whenever anyone with a contact-specific ringtone or message notification contacts me, all I get is the default ring/sound. Any thoughts on how to fix this?
2. This phone uses the same green LED for everything. Is there a way to change this? My old galaxy (S3) used a blue LED for phone calls/messages/texts, a green LED for Facebook notifications/messages, etc.
3. Is there a setting to scroll through app screens (or the front screens) in a loop? It's a petty complaint for certain, but I do miss the convenience of getting from Amazon to Zedge with one page turn vs having to flip through the entire alphabet.
4. On Day 2 my lock screen decided to stay unlocked (meaning-it only required the default swipe). All of the settings indicated it was set for "pattern" but it didn't ever need the pattern. Restarting the phone put the pattern back in place, but only for a couple of times, then it went back to the default swipe. I tried this twice. I turned off the phone and left it off for 20 minutes, and haven't had a problem since, but I am adding it to this list of questions because a coworker is still experiencing this problem (powering off did not fix his problem).

I, too, am having difficult is with my Galaxy S6 contact specific message tone as well as vibration pattern. I have multiple LED colors for different items. I use the fingerprint for security and no issues there. Sure hope Verizon comes out with an answer soon. Don't like the Samsung message app, but may be forced to use it, so I can signify different vibrations/tones.

How do I make screen brighter and the sound quality better with W8 OS on my iMac through bootcamp assistant like it is with my mac os ?

How do I fix my screen brightness on my imac via W8 OS on my Imac through boot camp assistant and How do I fix the quality of the sound coming from my imac when in w8?

Alright, first off, thank you for your help so far. I really appreciate it. However, now I have a new problem that I need help with.
I did exactly what you've said to do, and it worked fine, the screen itself became brighter again, it was just too dim before and the brightness settings were all the way up, but after doing what you said to do, It's as it is when using my Apple/Mac OS. The sound coming from the computer speakers and all the other audio issues have been fixed as well. It all sounds like it should in terms of quality. It's just now that I did that, I'll shutdown my computer, or even restart it for some reason, and each and every single time I do that, It's all back to the way it was before installing anything, dim and poor audio quality. Until I install the drivers again like before.
Am I going to have to get used to that or something? Or is there an option I'm just not seeing that would make these preferences and instalations permanent until I input/imply otherwise??
Thanks in advance!!

Windows 7 and surround sound problem

Hi,
I have recently installed Windows 7 Ultimate x64 edition on my desktop PC.
I have Creative Audigy 4 Pro with the external panel and Creative Gigaqworks S750 speakers.
The problem is that the speakers play only in stereo mode (only front 3 speakers) although I have set the speakers to play in 7. mode from audio console and speaker settings.
Whether I lsiten to music or play games it's the same.
Please note that I have downloaded and installed the latest drivers from creative website (Creative Sound Blaster Audigy series driver 2.8.00).
Any ideas anyone how to fix this?
Cheers

(? Hi mate,
I was lucky enough to find the solution to the problem quite fast thanks to a reply in another forum.
All you need to do is download SB Audigy Series Support Pack 3.6 (/09/2009)
The link to get more info about these modded drivers is here:
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934"]http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934[/url]
The link to actually download the drivers is here:
<a rel="nofollow" target="_blank" href="http://www.supashare.net/nn2jkorp6yz"]http://www.supashare.net/nn2jkorp6yz[/url]
<a rel="nofollow" target="_blank" href="http://rapidshare.com/files/304598/Audigy_SupportPack_3_6.exe"]http://rapidshare.com/files/304598/Audigy_SupportPack_3_6.exe[/url]
Hope this helps
Cheers!

PSE 7.0 - importing videos as .avi and having sound problems

I am doing a slideshow with mainly pictures and want to include a few videos in my slideshow as well. I have imported the .avi videos and they are inserted after the pictures. The pictures are set to a song and then the song has stopped and I have the slide show set to NOT continue to play the song till the end. The problem is the videos have no sound. When I open them in windows media player though they are fine. Any suggestions?

Export the AVI as WMV in window movie maker and import the WMV in slide show then export as wmv. Lots of codec are using in different format it could be an issue of audio codec using in AVI file.

EBusiness Suite User "Auto-provisioning" and "Self-Request" Problem

I have two types of OIM User, Staff and Contingent
Staff (Role = Full-Time)
Contingent (Role = Contractor / Role = Consultant)
Resource Object: eBusiness Suite User
Here's my RO configuration:
Auto Pre-populate: true
Allow Multiple: true
Self Request Allowed: true
Allow All: true
Auto-Launch: true
EBS Connector, by default has two forms:
UD_EBS_UO: Object Form
UD_EBS_USER: Process Form
I have requirement which will auto-provision eBusiness Suite User resource to Staff users.
Originally, UD_EBS_OU is the table name used by the RO. For auto-provisioning to work, I have implemented it this way:
First, I have defined a User Group for Staff and assign an Access Policy to it (for users with Role == Full-Time).
Then, I have detached Object Form UD_EBS_UO from the RO. This way, when Staff user is created in OIM, it is automatically provisioned with eBusiness Suite User, though it won't have a Resource Form, only a Process Form. Process Form fields are automatically pre-populated with values (via my Pre-populate adapters).
Now my problem is during Self-Request. Contingent user doesn't get auto-provisioned with EBS RO, but he can self-request for it. Problem is, since I detached the Object Form from the RO, user is not seeing any form during request. And I have a requirement that approver of the request should also be able to view/modify the details of the request form. But that is not possible now that Object Form does not exist for this RO.
Is it possible that Self-Request and Auto-Provisioning works both ways under the same Resource Object? How do I configure that? Appreciate your quick response and help. :)
Edited by: user10202544 on Feb 10, 2010 3:27 AM

Yes I have set permissions to all users for the Object Form.
It is required for me to have both Self Request and Auto-provisioning work for eBusiness Suite RO.
During approval, however, the approver needs to see the Object Form (where he can view/modify its values before approving it). That's impossible for me since I detached the Object Form from the Resource Object. I need do to this for auto-provisioning to work.
It seems that it doesn't work both ways. Any other suggestions?

Remote Fault Auto Retry and Notification

Hi,
I am using Oracle SOA Suite 11g PS2.
In one of the process I am trying to use Fault handling mechanism of SOA.
I have written code to use Auto Retry mechanism using fault-policies.xml,I want to send notification before SOA start Auto Retry on Remote Fault.
It does not execute catch block but it directly start Auto Retry.
Code of my fault-policies.xml is as follows
<?xml version="1.0" encoding="UTF-8" ?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="Test"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
</Conditions>
<Actions>

<Action id="ora-retry">
<retry>
<retryCount>1</retryCount>
<retryInterval>120</retryInterval>
<retryFailureAction ref="ora-human-intervention"/>
</retry>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
I want to send notification before SOA start Auto Retry.
anyone aware why it does not rethrow fault and then starts Auto Retry.
Thanks,
Arun Jadhav.

Any help ?

Auto Brightness and Notification Sound Problems

Similar Messages

Maybe you are looking for