Auto brightness of iPad mini retina is not working after 7.1.1 update

Auto brightness of my iPad mini retina has stopped working after iOS 7.1.1 update.
The brightness neither automatically reduces nor does it increases as per the change in ambient light conditions.
I have ensured that auto brightness is ON still nothing seems to happen. Pl help.

I had to turn off website restrictions to get it to work.

Similar Messages

  • Auto-Brightness on iPad mini Retina is not working properly.

    Hello! Noticed that the Auto-Brightness on iPad mini Retina is not working properly.
    It works correctly only when such a dark place, then unlock the iPad brightness will be at a minimum. Likewise, if unlock iPad in a room with light, the brightness will adjust to the surrounding space.
    If I turn light into a dark room, the brightness slider does not move, and stands on the site. Checked on the iPhone 5S, there problems are not present. Auto Brightness is working correctly.
    P.S. Sorry for my bad english!

    Godly19 wrote:
    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
    iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
    The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
    And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

  • My iPad orientation is not working after the IOS 8 update.  Please fix this bug!

    my iPad air orientation is not working after the IOS8 update.  Can you fix this bug? Thx

    Did you try a reset?
    Restart / Reset
    http://support.apple.com/kb/HT1430

  • Illustrator tools dropdown is not working after the recent software update

    My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

    Same problem here.  I have a Mac with a recent Yosemite update.

  • Home button not working after 5.0.1 update

    Ok now the home button not working after 5.0.1 update.  Anyone have any ideas?  How do I roll backfrom this update?

    This happened to me as well.  AT&T had me reset my network settings and this fixed the problem.  Here is how...
    Settings > General > Reset > Reset Network Settings
    "For now" the problem is fixed for me.

  • Ipad mini- touch screen not working:(, Ipad mini- touch screen not working:(

    Ipad mini touch screen not working

    Try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and then see if your touch screen is back.

  • Drobo not working after 10.5.8 update

    My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

    'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
    This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
    From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
    I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
    Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
    The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
    As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
    Oh, and Data redundancy on a raid is not a backup of course.
    Vincent
    Message was edited by: v1ncen7

  • Touch ID not working after IOS 7.1 update

    Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

    I'm like, Touch ID almost dead, we're going apple fixex this.
    Seems it only is affecting the white model

  • External monitor Syncmaster 2494SW not working after 10.6.7 update

    External monitor Samsung Syncmaster 2494  SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
    Safemode boot, SMC reset, PRAM reset did not help.
    Exactly the same setup works perfectly under 10.6.6.

    HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
    I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
    Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
    WHAT TO DO TO FIX:
    Go to => System Preferences  => Energy Saver => change graphic settings to Higher Performace.
    Cheers!!

  • Trackpad not working after 10.8.4 update

    Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

    Apple store genius bar appointment is the best option for a positive resolution.
    Ciao.

  • IPod touch not working after 5.0.1iOS update

    It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

    Have you tried the sandard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Retore from backup
    - Restore to factory defaults/new iPod.

  • Reading ebooks on the iPad mini retina does it work outdoors?

    I am about to buy an ipad mini with retina display. I would like to know how well this works as an ebook reader, especially outdoors.

    Backlight screens such as on the iPad do not work well in bright sunshine. They get washed out. If you plan to use your reader outdoors frequently, you may wish to instead consider one of the "e paper" based readers such as the standard Kindle readers (not the Kindle Fire) that operate by reflected light rather than a backlight. If you have an Apple Store or dealer near you that opens directly to the outdoors rather than being in a mall, visit one and ask one of the sales associates if they can show you how the iPad's screen looks outdoors so you can judge for yourself.
    Regards.

  • Ipad mini retina blue screen issue after ios 8 update

    After update to iOS8 over wifi, my iPad Mini with Retina Display is working perfectly, however I had an issue twice since yesterday. While using it, I observed the screen became totally blue (like Windows crashing) and the ipad restarted. Anyone facing such issues?

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Auto brightness of screen and keyboard backlight not working

    Basically, since I updated to OS X Lion, the auto brightness feature for the screen and keyboard hasnt been working, despite the fact I have it turned on
    Thanks in advance for your help

    Same problem here.  I initially thought the auto-brightness problem had been fixed in 10.7.3, but sadly it hasn't. The auto-brightness works when the Mac starts, but I find it loses control and fails after wake from sleep. 
    I have telephoned AppleCare several times but they are not aware of this bug.  They think a PRAM reset cures it, but it doesn't.  As soon as the machine goes to sleep then auto-brightness fails on wake.
    I have used the Apple Form to report the bug.  It might eventually get fixed if others would kindly report it as well please.  Here is the link:
    http://www.apple.com/feedback/macosx.html

  • IPad Mini - Word Suggestion not working

    When I am using Pages on my iPad mini and I spell a work wrong it does not let me correct it, well it does not give me an option to correct it. When I click on the word (pages does indicate a misspelling by underlining it in red) it highlights it, but I have no options (select, copy,  define, suggest..etc). Any one know what I can do to fix this problem? Thank you

    Have you tried to reset it? Hold down the sleep and home keys until you see the silver apple. For about 20 seconds or so. See if it'll reboot and then see if the screen works.

Maybe you are looking for

  • Error while running spatial queries on a table with more than one geometry.

    Hello, I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry. When GeoServer renders objects with more than one geometry on the map, it creates a query w

  • Poor Performance in ETL SCD Load

    Hi gurus, We are facing some serious performance problems during an UPDATE step, which is part of a SCD type 2 process for Assets (SIL_Vert/SIL_AssetDimension_SCDUpdate). The source system is Siebel CRM. The tools for ETL processing are listed below:

  • Skype to go number in mexico

    I just set up my skype to go number for my cell phone in Mexico.  I try the number that they gave me and it ends up being a wrong number.  What can I do, can somebody help me with this problem?

  • Message Driven Bean deployment problem in SAILFIN b12

    Hi, I am a fresh learner in EJB technology and have been experiencing a deployment problem while attempting to deploy a very simple message driven bean, that does nothing basically, to a SAILFIN (b12) application server instance. I am using NetBeans

  • HT204291 I get sound but I get no picture?

    I just purchased Apple TV. So far I really like a lot of features. I'm trying to understand AirPlay when I connect I get sound but I never getting any picture. Any suggestions? Also I'm using Siri right now so if my sentences seem a little choppy or