Auto-Brightness on iPad mini Retina is not working properly.

Hello! Noticed that the Auto-Brightness on iPad mini Retina is not working properly.
It works correctly only when such a dark place, then unlock the iPad brightness will be at a minimum. Likewise, if unlock iPad in a room with light, the brightness will adjust to the surrounding space.
If I turn light into a dark room, the brightness slider does not move, and stands on the site. Checked on the iPhone 5S, there problems are not present. Auto Brightness is working correctly.
P.S. Sorry for my bad english!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Similar Messages

  • Auto brightness of iPad mini retina is not working after 7.1.1 update

    Auto brightness of my iPad mini retina has stopped working after iOS 7.1.1 update.
    The brightness neither automatically reduces nor does it increases as per the change in ambient light conditions.
    I have ensured that auto brightness is ON still nothing seems to happen. Pl help.

    I had to turn off website restrictions to get it to work.

  • Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Ipad mini- touch screen not working:(, Ipad mini- touch screen not working:(

    Ipad mini touch screen not working

    Try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and then see if your touch screen is back.

  • IPad audio  output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    my iPad is a 3rd gen, 16GB wifi only model, if that helps
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

    Godly19 wrote:
    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
    iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
    The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
    And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

  • Reading ebooks on the iPad mini retina does it work outdoors?

    I am about to buy an ipad mini with retina display. I would like to know how well this works as an ebook reader, especially outdoors.

    Backlight screens such as on the iPad do not work well in bright sunshine. They get washed out. If you plan to use your reader outdoors frequently, you may wish to instead consider one of the "e paper" based readers such as the standard Kindle readers (not the Kindle Fire) that operate by reflected light rather than a backlight. If you have an Apple Store or dealer near you that opens directly to the outdoors rather than being in a mall, visit one and ask one of the sales associates if they can show you how the iPad's screen looks outdoors so you can judge for yourself.
    Regards.

  • Auto brightness of screen and keyboard backlight not working

    Basically, since I updated to OS X Lion, the auto brightness feature for the screen and keyboard hasnt been working, despite the fact I have it turned on
    Thanks in advance for your help

    Same problem here.  I initially thought the auto-brightness problem had been fixed in 10.7.3, but sadly it hasn't. The auto-brightness works when the Mac starts, but I find it loses control and fails after wake from sleep. 
    I have telephoned AppleCare several times but they are not aware of this bug.  They think a PRAM reset cures it, but it doesn't.  As soon as the machine goes to sleep then auto-brightness fails on wake.
    I have used the Apple Form to report the bug.  It might eventually get fixed if others would kindly report it as well please.  Here is the link:
    http://www.apple.com/feedback/macosx.html

  • IPad Mini - Word Suggestion not working

    When I am using Pages on my iPad mini and I spell a work wrong it does not let me correct it, well it does not give me an option to correct it. When I click on the word (pages does indicate a misspelling by underlining it in red) it highlights it, but I have no options (select, copy,  define, suggest..etc). Any one know what I can do to fix this problem? Thank you

    Have you tried to reset it? Hold down the sleep and home keys until you see the silver apple. For about 20 seconds or so. See if it'll reboot and then see if the screen works.

  • IPad mini cover closure not working

    The magnetic cover for iPad mini does not put it to sleep on closure. Any suggestions?

    Does it matter what side you place the cover on?  Try bringing a magnet up to the Ipad also to see if the magnet is not working in the cover.  If another magnet works then there is a problem with the cover.  I would see about getting it replaced in that event. 
    mrproductreview.com

  • IPAD MINI TOUCH SCREEN NOT WORKING

    Ipad mini touchscreen stopped working.  Help?

    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).
    Again... how's he going to go to any of that when the touchscreen is dead?
    My response adds value by eliminating that same copy/paste canned answers when clearly the question wasn't read.
    How's your brain working when it's overwhelmingly obvious you missed the part about the TOUCHSCREEN not working...
    Again, good advice Dr. Canned Answer... Home button and Power, sure... short of the buttons being broken as well, that might help...
    The "if that doesn't work" part was clearly the rest of the waste when he can't get there...
    This sums up your advice for fixing the touchscreen when the touchscreen is broken...

  • IPad mini wi fi not working

    Even after ios 6.0.2 update, wi-fi is not working on my brand new iPad mini (Wi-fi+Cellular)which was purchased on 24th December, 2012 in India. Wi-fi is working just fine on other ios devices at home like my iPad2 & iPhone4s.
    Please fix this soon.

    Update:
    Read some other posts and tried this and it works (but a bit flakey):
    Shut down router, computer and iPad Mini
    Then power them on in the following sequence:
    1. Computer and launch iTunes
    2. Router
    3. Ipad Mini (check Wi-Fi connection OK)
    Wait until everything is loaded
    ITunes will still not show the device, but on iPad Mini go to Settings/General/iTunes/Wi-Fi Sync
    "Sync Now" should no longer be "grayed out", so press it
    The device then appeared on iTunes
    However(!), when the computer is switched off and on, the device disappears from iTunes, but if you then also switch the iPad Mini off and on, it will be available again (you might still have to go to Sync Now again on the device first)
    General comment - Wi-Fi sync is quite slow and won't perform software updates - you'll still need the cable!  

  • My iPad mini headphone jack not working can you help

    Wend I plug my headphones in to my iPad mini I have no sound coming of them can you help please.

    Are you sure that they are plugged in all the way? It really takes quite a firm push in order to set the headphone jack into the opening all the way.

  • After install of ios7 on ipad mini wifi will not work

    I have installed ios7 on my mini. After doin so WiFi will not work.  Button is greyed out.  When I try to erase all content and go back to factory it wants my password and won't do so because it says no internet connection.  Had I know this was going to happen I would have left well enough alone.  I have tried hard resetting by holding home and off button simultaneously but not working.  Anyone have any ideas?  This mini is now basically useless to me without internet.  I'm really annoyed.

    Hello Andy,
    1st guess would be an incompatible extension from the previous OS, 2nd would be a reinstall of the OS is needed, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • IPad 4 Retina Display not working

    Hi,
    Trying to fix my daughters ipad4 as the display suddenly stopped working properly last night. At first taking off the magnetic screen cover sorted the issue, today that makes no difference...all you can see now is a pattern of wavy lines across the screen. Tried to do a reset with the home and standby buttons but I still get the wavy lines instead of the apple logo, then it goes blank after a few seconds.
    Any ideas gratefully accepted, its outside the one year warranty period

    I'm having the same problem on the iPad Air Wifi 32GB, sometimes it works, sometimes it doesn't. It worked perfectly on ios7 so hopefully the next update will fix it.

  • Auto-Submit On Change in DropDown List not working properly!

    Hi all,
    I�ve got a problem with a drop down list an a table with some rows on my page. The property "Auto-Submit on Change" is set for the drop down because the valueChange-method has to do some work when the user selects another value from the drop down.
    The problem is that after selecting another item from the drop down, the table fields don�t keep their values, which I had entered before I selected another item in the drop down. But: When I select an item again, suddenly exactly these values are set.
    Here my code:
    <?xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <f:view>
    <ui:page binding="#{Page1.page1}" id="page1">
    <ui:html binding="#{Page1.html1}" id="html1">
    <ui:head binding="#{Page1.head1}" id="head1">
    <ui:link binding="#{Page1.link1}" id="link1" url="/resources/stylesheet.css"/>
    </ui:head>
    <ui:body binding="#{Page1.body1}" id="body1" style="-rave-layout: grid">
    <ui:form binding="#{Page1.form1}" id="form1">
    <ui:table binding="#{Page1.table1}" id="table1" style="height: 488px; left: 24px; top: 120px; position: absolute; width: 1376px"
    title="Table" width="1376">
    <ui:tableRowGroup binding="#{Page1.tableRowGroup1}" id="tableRowGroup1" rows="10" sourceData="#{SessionBean1.columnProvider}" sourceVar="currentRow">
    <ui:tableColumn binding="#{Page1.tableColumn1}" headerText="field1" id="tableColumn1" sort="field1">
    <ui:textField binding="#{Page1.textField1}" id="textField1" text="#{currentRow.value['field1']}"/>
    </ui:tableColumn>
    <ui:tableColumn binding="#{Page1.tableColumn2}" headerText="field2" id="tableColumn2" sort="field2">
    <ui:textField binding="#{Page1.textField2}" id="textField2" text="#{currentRow.value['field2']}"/>
    </ui:tableColumn>
    <ui:tableColumn binding="#{Page1.tableColumn3}" headerText="field3" id="tableColumn3" sort="field3">
    <ui:textField binding="#{Page1.textField3}" id="textField3" text="#{currentRow.value['field3']}"/>
    </ui:tableColumn>
    <ui:tableColumn binding="#{Page1.tableColumn4}" headerText="field4" id="tableColumn4" sort="field4">
    <ui:textField binding="#{Page1.textField4}" id="textField4" text="#{currentRow.value['field4']}"/>
    </ui:tableColumn>
    <ui:tableColumn binding="#{Page1.tableColumn5}" headerText="field5" id="tableColumn5" sort="field5">
    <ui:textField binding="#{Page1.textField5}" id="textField5" text="#{currentRow.value['field5']}"/>
    </ui:tableColumn>
    <ui:tableColumn binding="#{Page1.tableColumn6}" headerText="field6" id="tableColumn6" sort="field6">
    <ui:textField binding="#{Page1.textField6}" id="textField6" text="#{currentRow.value['field6']}"/>
    </ui:tableColumn>
    </ui:tableRowGroup>
    </ui:table>
    <ui:dropDown binding="#{Page1.dropDown1}" id="dropDown1" items="#{Page1.dropDown1DefaultOptions.options}"
    onChange="common_timeoutSubmitForm(this.form, 'dropDown1');"
    style="position: absolute; left: 48px; top: 24px; width: 240px; height: 24px" valueChangeListener="#{Page1.dropDown1_processValueChange}"/>
    </ui:form>
    </ui:body>
    </ui:html>
    </ui:page>
    </f:view>
    </jsp:root>
    and the code of the valueChange-Method:
    public void dropDown1_processValueChange(ValueChangeEvent event) {
    getSessionBean1().getColumnProvider().commitChanges();
    List positions = getSessionBean1().getColumnProvider().getColumnList();
    Is there some explanation for this behavior or it�s really a bug in the way how the drop down is submitting the form? I would understand it when commitChanges is not working here because of auto submit on change (==immediate?). but once it works und once it doesn�t work!

    Hi There,
    Not sure what you mean. Have you tried Netbeans 6 yet. Do you see same behaviour in it as well?
    This might be of help to you
    http://www.netbeans.org/kb/55/dropdowncomp.html
    Thanks
    K

Maybe you are looking for

  • Access http connection

    Hi, How do I configure to access http connection so that file can be retrieve dynamically? Eg: Remotely I have Xml application, with some services (length conversion, space conversion, weight conversion etc etc). Total number of services must be retr

  • Adding a workset to a Business Package

    Hi, I have created a business package using the SAP Netweaver Development Studio. I did this: File -> New -> Project... (opens 'New Project' wizard) Portal Application -> Create a Portal Application Project Project name: MyBP; project root folder: C:

  • Selecting the Pixels of a Shape. It use to be easy now it's not!

    Hey Guys, I use to use CS3 on a PC. Now I use CS5 on a Mac OSX 10.6.3 I believe the shortcut for selecting the pixels of a shape was CTRL-R. I've tried various ways a Mac might do it like Command + R and Option + R etc and nothing works. All I want t

  • Avid DNxHD not working with Color?

    QT HD Avid DNxHD Codec working with FCP but not with Color ? Help

  • Can I set an additional SSID?

    Hi I have a HH3 which I use for various wireless connections around the house. I am taking bed and breakfast guests on a small basis this year, and would like to offer them wifi. I am slightly concerned about giving them my wifi password, as I guess