Auto Brightness slider tab on/off not there after OS 6 update

Don't even have the slider button. Has anyone experienced this issue?

OK,
The Cookie setting had to be set to always, all browsing data and cookies had to be reset. works now.

Similar Messages

  • I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.

    I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.
    I guess what I have experienced might be a special case of 'Restore previous sessions'. The actual situation was that after I rebooted my laptop, Adobe update jumped out indicating an update being finished successfully. After I clicked on the 'close' button of the Adobe window, it automatically started firefox and linked to its website. But I did not find the 'Restore previous sessions' page this time. Then I restarted firefox, this time there was a start page with 'Restore previous sessions'. However, sadly enough, it is only restored my pinned pages plus the Adobe website. Actually, I am using 'bookmark all tabs' from time to time to secure opened tabs, but this time I did not expect such an incident. I would suggest to improve the 'Restore previous sessions' with multiple time tags and appear in all cases including my reported case here, after updating firefox, crashes etc. I like firefox in most occasions, therefore believe and hope it becomes better and more robust. Thank you very much!

    Hi,
    Please see the following support request: http://forums.mozillazine.org/viewtopic.php?f=38&t=2628065
    I think the best option would be to leave feedback here to let the relevant development team know about the problem you have had: https://input.mozilla.org/en-GB/feedback
    Also you could try the [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager] add-on which gives more control over how sessions are restored.
    I hope that helps

  • New features of itunes 11.0.3 not there after download

    new features of itunes 11.0.3 not there after download

    With iTunes 11 some features have been added and some have been removed. Here's a CNET writer's take on them http://m.cnet.com/news/7-features-apple-killed-off-in-itunes-11/57556548
    Here's a great resource from Apple that goes over some common features. http://support.apple.com/kb/HT5649
    You mentioned the sidebar on the left, it's addressed in the resource from Apple. I hope this helps.

  • Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the

    Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me

    Doing those doesn't turn off your phone?
    As stated hold down the top button only until you see the red slider to power off your phone.
    If that doesn't work then take it to Apple and see what they say.

  • HT2693 My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    First of all - you are running the proper iOS in order to use the latest version of Pages - correct? You need iOS 6 now.
    If so ....See if this helps. Maybe Pages will open after you try this.
    Quit the Pages app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ..... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that didn't help backup and send your files into iTunes with file sharing.
    You could lose all of your files if you delete and reinstall the app. That is precisely why you should backup your iPad and send your files into iTunes using files sharing on the iPad. Do you backup or use file sharing?
    Backup your iPad, send the files from the iPad into iTunes using file sharing and then delete the app and reinstall it.
    Start here ..... How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    iOS: About file sharing.
    http://support.apple.com/kb/HT4094

  • Itunes is not loading after i've updated to ios7. What do i do?

    Itunes is not loading after i've updated to ios7. What do i do?

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • SD Card not showing after Mountain Lion Update

    This matter has been discussed for some time now in
    Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
    SD Card not showing after Mountain lion Update
    Since the update to Mountain Lion, the SD slot does not show up in Finder.
    Someone gave a fix using the killall in Terminal, and that worked only once.  I have not been able to get that fix to work again.
    The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
    Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
    However, Finder still cannot see it.

    BrianForbesColgate wrote:
    Thanks, Barney ...
    Those are basics ... Been there, done that, first.
    Then you should hava posted all the troubleshooting you already accomplished.
    Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
    Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • Windows could not start after SP-3 update

    Windows could not start after SP-3 update
    After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I used the power button to shut down Windows & then booted into Mac OS X normally.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
    Thanks for any help.

    Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
    Message was edited by: growler62000

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    Take a look here:
    http://support.microsoft.com/kb/953266
    If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
    Regards.

  • Why MLB.TV is not appearing after the last update?

    why MLB.TV is not appearing after the last update?

    Make sure the store is set to the US.. Also restart the ATV.

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for

  • Restart and data restriction

    Hello again Sony's team and thanks for your hard work. I Have two issues again. 1) I have restricted background data and I want to undo that. 2) my phone restarts with no reason. I may not be even using it. Sometimes restart in few days and sometimes

  • Suddenly my wifi signal died to one dot

    I have had no issues with my 64GB 3G ipad and suddenly tonight, my iphone has 4 bars sitting next to the router, the ipad has one dot and I cannot open a pdf in my e-mail. I tap on the pdf attachment and it just sits at 0 of 2.5GB. Nothing happens???

  • Shoukd the 'final' keyword should be used on all input parameters?

    In my very limited experience as a java programmer have never seen this done any where. Except in the java.lang.Math class which has a final variable, of type double, called PI. As pi is not a value that should change during the execution of a progra

  • ME29N - Block changes in screen after validation

    Hi, We have a workflow which allows to change only specific items during the ME29N validation. However, once the PO is fully validated, it should no more be possible to change anything. The problem is how to block the changes in the ME29N between the

  • I Base Tables

    Hi All,   I have the I-Base Number. Can someone pls tell me the flow of tables to get the component # & Component Serial # having the I-Base Number.