Auto Calculate not working in Locked Title.

I am in the process of upgrading from AW 5.0.4 to AW 6.2.9
Just as a matter of interest and also it may help some who suffer the "Autocalc on strike" bug.
I ran into the "Autocalc on strike" bug in two large spreadsheets when they were saved as AW 6. I use these spreadsheets continually from year to year to keep annual track of my business so they are important to me.
All of the many calculations and references updated automatically as data was entered, except those that were placed in the "Locked Title". These needed the manual "Calculate Now" command to force them to respond.
I tried the "save in AW 5 and save back into AW 6" trick but this did not work.
The solution that fixed both spreadsheets was to:
Quit AW 6
Open copies of the original AW 5 spreadsheets in AW 5.
Go to "Options" menu and uncheck "Lock Title position"
Save
Quit AW 5
Open and save the spreadsheets in AW 6 again.
The title can be locked again if desired.
Wonderful.... now I have my precious spreadsheets and database working perfectly in AW 6 and access to my many files produced over the last eight years, here's to another ten years of using Appleworks.

Looks like you are facing the issue mentioned in the below article.
Auto-Blend Layer masks are all black or all white
If so, revert back to PS CC as of now.
Here is the process, Creative Cloud Help | Install, update, or uninstall apps
~ Arpit

Similar Messages

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

AUto attendant not working

Auto attendant not working .....
If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
Is there Option to set
Please press the extension which you want to Call ...
Eg: if i press 222 that time it should ring the 222 extension
Please help this is the first time i am working on this stuff
If i chnage the scrpt file then i can hear auto attendant not initiazlised.. please find the attched screen shot and back file for more details.
Best Regards
Shabeel

Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
Check also the Calling Seach Space
GW should be able to reach CTI Route Point and CTI ports partition.
If you try other extension it works fine?

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Auto brightness not working on iPhone 5?

On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
Anyone else have this problem of the auto brightness not working?

There is nothing wrong with the auto brightness.
When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
If you have the slider too high the brightness cant reduce because youre not letting it.
Set your brightness at about 25% and you'll see what I mean.

The pop-up will not work without locking up

Adobe Muse does not work with the Swedish version in Windows 7. The pop-up will not work without locking up.
I have tried by changing the screen resolutions but the problem continues. What to do?

When I try to delete a page in design mode freezes the program.
It is not possible to change tools in the toolbox.

Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

Screen locking up and auto rotation not working on phone wakeup

Since updating to iOS8 my iPhone 5 and 5s will lock up when waking the phone. I also have noticed that the screen rotation does not work riight away and is sluggish. Certain apps tend to freeze which could be that they need an update themselves. It is a shame that Apple has resorted to using its customers as beta testers for their software. As a die hard Apple fan it is getting harder to stay true to the company. Apple should be leading not playing catch up which is why I think theses major software issues develop.

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Auto Rotation not working correctly Radius p55w B5112

It has not worked correctly since I bought it. I have recovered from image fresh again, and then went through and hit windows update and updated 134 updates. Auto rotate does not work in tablet or in presentation mode. The keyboard never shuts off and I can type in tablet mode. If I have this on my lap, the buttons are pressed. I have a lock on my screen rotation, it is greyed out and I cannot access it. Any other suggestions to fix this?? Everthing else works great!

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

Auto Rotation not working on ipad 2 after upgrading to ios 6.0.1

Hi
I just upgraded my ipad 2 to ios 6.0.1 . Auto Rotate is not working ..I have tried to reboot(Pressing home and sleep button together.. I also noticed that red striker not appearing while doing it )
Also I made sure Lock Rotation is off.
Please help me..
Thanks

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

Flash player silent auto update not working

I was glad to read the news about the new feature of silent auto updates of the Adobe Flash player, but unfortunately this is not working on my machine. Has anyone had the same problems and was able to solve them?
Some information on my setup:
I had previously installed Flash player version 11.1.102.63, both ActiveX and Plugin version (installed through the .msi files, deployed via Active Directory/GPO - no further configuration, just plain original .msi files).
To test the auto update feature, I decided to install the new 11.2.202.228 version, but only the ActiveX version. I installed this via the .exe installer (install_flash_player_11_active_x_32bit.exe) manually, choosing "Install updates automatically when available (recommended)" in the last step of the installation, as seen here:
http://www.adobe.com/devnet/flashplayer/articles/background-updater-windows.html
When I open Control Panel -> Flash Player, under the "Advanced" tab I see:
"Install updates automatically" is chosen, but greyed out (no admin rights with this windows user)
ActiveX version: 11.2.202.228
Plug-In version: 11.1.102.63
The file "mms.cfg" under C:\WINDOWS\system32\Macromed\Flash\ contains:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
The task "Adobe Flash Player Updater" was created and is scheduled to run every 1 hour. I can see that it is started ("last start time"), the result code is 0x0 which means "no error".
So everything as expected. But the auto update is not working, since the plugin version of flash player never gets updated!
I edited the "mms.cfg" and added:
SilentAutoUpdateVerboseLogging=1
After manually starting the task, there are some lines added to "FlashInstall.log" in the same directory:
2012-4-4+7-20-48.814 [info] 1614
2012-4-4+7-20-48.829 [info] 1615
2012-4-4+7-20-48.829 [info] 1618
2012-4-4+7-20-48.829 [info] 1619 1063
2012-4-4+7-20-48.876 [info] 1614
2012-4-4+7-20-48.876 [info] 1615
2012-4-4+7-20-48.876 [info] 1618
2012-4-4+7-20-48.876 [info] 1608
2012-4-4+7-20-48.876 [info] 1604
2012-4-4+7-21-10.425 [warning] 1403 12029
2012-4-4+7-21-10.425 [warning] 1407 183
2012-4-4+7-21-10.425 [warning] 1408
2012-4-4+7-21-10.456 [info] 1624
2012-4-4+7-21-10.456 [info] 1612
2012-4-4+7-21-10.456 [info] 1621
What does this mean?
Some more information:
Windows XP SP3, all windows updates installed, german
Avira Professional Security anti-virus software
Machine is behind a proxy server, but this is set up in Control Panel -> Internet Options
I suppose this is a problem with our proxy server. Does the auto updater not use the proxy information from the Windows Control Panel settings?
Kind Regards,
Martin

Hey Hans,
After reading of your sucsess I attempted to replicate it.
I am happy to say that I managed to update from Adobe Flash 11.2.202.228 to 11.2.202.233 on serveral different windows 7 notebooks and desktops sliently.
I went into the windows task scedular and ran the Adobe Flash Player Updater task (I didn't need to change anything in the task or the service for it to work).
The only issue I found was that if I ran the task again without restarting the computer no requests from the client would show up in the logs from my web server but if I restarted my computer and then reran the task it would work again. I'm assuming that it will only sent requests out every 24hours is talked about in page 18 of the Flash Player 11.2 Administration Guide.
My Web Servers logs look like this:
2012-04-27 05:45:01 W3SVC1967680676 10.135.12.38 GET /pub/flashplayer/update/current/sau/11/xml/version.xml - 443 - 10.135.13.17 Get+Flash+Player+version+xml/1.0 200 0 0
2012-04-27 05:45:05 W3SVC1967680676 10.135.12.38 GET /pub/flashplayer/update/current/sau/11/install/install_all_win_ax_sgn.z - 80 - 10.135.13.17 Download+Flash+Player+Installer/1.0 200 0 0
My mms.cfg looks like this:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
SilentAutoUpdateServerDomain=proxy.tallangatta-sc.vic.edu.au
I think the biggest issue I had during testing was that I forgot to my web servers certificate into the windows certificate stores trusts root certs of my notebooks/desktops. EG: http://blogs.adobe.com/livecycle/2012/04/rights-management-how-to-get-windows-7-to-trust-a -self-signed-server-certificate.html
I have since deployed the mms.cfg file and added my web servers certificate into the trusted root certs via group policy to all my clients and it is working very well. I have also writen a batch file to download the needed files from adobe for that backgroup updater and to put them on my web server. I created a daily task on my web server to run the batch file. If anyone wants the batch file or shell script please email me and I'll forward it on.
My batch file pretty much looks like this:
@echo off
:::::::::: INFOMATION ABOUT SCRIPT ::::::::::
:: This Script Titled adobe-flash-background-updates and was written by Tyrone Wyatt of www.cloudportal.org.
:: This Script is open to use by everyone and is not under any licence.
:: See flash_player_11_2_admin_guide.pdf for more infomation on how this script is required to function.
:::::::::: SCRIPT CONFIG ::::::::::
:: The TITLE option is the scripts name
set TITLE=adobe-flash-background-updates
:: The LOG option is the log file.
set LOG=./%TITLE%.log
:: The SOURCE option is the mirror on which you would like to download the flash files from.
set SOURCE=http://fpdownload2.macromedia.com
:: The DESTINATION option is where you would like your downloaded files to go so they are accessable by your web service.
set DESTINATION=d:\wwwroot\Proxy
:: The VERSION option is the current major version of Flash Player (for Flash Player 11.2, the major version is 11).
set VERSION=11
:: The Proxy settings for wget to use
set HTTP_PROXY=http://edupass.tallangatta-sc.vic.edu.au:8080
:::::::::: SCRIPT CORE ::::::::::
echo Welcome to %TITLE% Script!
echo =O====== %date% %time% ======== >> %LOG% 2>&1
if exist %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml (
echo Skipping destination folder structure creation.
) else (
echo Creating destination folder structure.
mkdir %DESTINATION%\pub >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION% >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install >> %LOG% 2>&1
echo Downloading files...
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/xml/version.xml -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml\version.xml >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_ax_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_ax_sgn .z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_pl_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_pl_sgn .z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_64_ax_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_64_ax_ sgn.z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_64_pl_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_64_pl_ sgn.z >> %LOG% 2>&1
echo Script complete! See log file for more infomation %LOG%
echo =X====== %date% %time% ======== >> %LOG% 2>&1
echo. >> %LOG% 2>&1
:::::::::: END OF SCRIPT ::::::::::
Thanks for your help,
Tyrone Wyatt.

Auto rotate not working on iPad V5

Ever since I upgraded to OS version 5, auto rotation is not working. I have a display of a lock and arrow going around it in the upper right hand side of my screen. How do I turn auto rotate on?

Double click your home button to open your multi-task then slide your finger to the right, tap the lock icon.

Auto resolve not working for cached outlook

We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode. Not in cached mode or via owa, it seems to work fine.

Hi,
Does the issue happen to all users or some specific users?
Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

Auto Calculate not working in Locked Title.

Similar Messages

Maybe you are looking for