Auto calculation issue

Hi,
I have a problem with an auto calculation row. One of the columns in the report is a percentage so I don't want the calculation to sum but to calculate with the column formula. Is it possible to achive this?
I'm using FR 9.3.1.
Thanks

Please try to change the formula option used at that cross cell to use the column formula.
Try this
Thanks

Similar Messages

Auto calculation

Hi,
I have an issue regarding autocalculation.In report,Entity and Account dimensions are in row .Actual,budget,Variance and Variance% are the columns for that report.For entity, we have used base funtion.And auto calculation is on for entity.Now the problem arises in the intersection of Var% col and Autocalculation row.Var% cell doesnt contain the Variance% value rather it contains the value of subtotal of all the values above that particular cell.So,is there any option to overwrite the priority of variance% over the autocalculation?or is there any option to overcome this problem?please help me to find out the solution...
Regards,
MG

Hi MG
Apologies i should have read up on it before my original post. It seems that the only option you may have is to 'hide' the formula on the calculated column. Take a look at conditional formatting section of the attached (pg 127 - 132 and particularly pg 130 - 132)
http://docs.oracle.com/cd/E17236_01/epm.1112/fr_user_epm.pdf
Hope this helps
Stuart

Help with Auto calculations

I have an existing pdf that i am trying to edit and make it more functional...i.e. fillable info with auto calculations of cost based on a given number (times a specific cost)
Example on the form....
Car Registrations (per car) _____ X $25 _________
The first line above is # Cars Registered
The last line is Total Cost
The blank lines above i have added a text box to for auto calculations. I have formated these boxes as numbers (first line) and dollar value total (second line)
I've added another text box for the $25 and placed it overtop the worded one. I've locked this box and the total box. I've calculated the product of the total box by linking it to the first line and the $25 to give the total cost...
Problem is, it isnt working....the total box isn't seeing the $25 to give a proper calc. Whatever number i place in the first line, only zero shows in the total.
I'm obviously missing something....been at this for two days....frustrated. I have many more inputs like this on the form, and eventually want all the totals to provide sub totals and a grand total. I understand how this all works to a degree, doesnt seem that difficult, but i have to be missing something.
I even tried re-creating the document in word, input to adobe, make a new form, let the system recoginize areas as fillable, etc, etc, etc. When i get to the calculations portion, same result...there are not many tutorials out there on this...sadly
Woking on a MAC...
I have acrobat X Pro

gr8snkbite wrote:
I have an existing pdf that i am trying to edit and make it more functional...i.e. fillable info with auto calculations of cost based on a given number (times a specific cost)
Example on the form....
Car Registrations (per car) _____ X $25 _________
The first line above is # Cars Registered
The last line is Total Cost
The blank lines above i have added a text box to for auto calculations. I have formated these boxes as numbers (first line) and dollar value total (second line)
I've added another text box for the $25 and placed it overtop the worded one. I've locked this box and the total box. I've calculated the product of the total box by linking it to the first line and the $25 to give the total cost...
Problem is, it isnt working....the total box isn't seeing the $25 to give a proper calc. Whatever number i place in the first line, only zero shows in the total.
I'm obviously missing something....been at this for two days....frustrated. I have many more inputs like this on the form, and eventually want all the totals to provide sub totals and a grand total. I understand how this all works to a degree, doesnt seem that difficult, but i have to be missing something.
I even tried re-creating the document in word, input to adobe, make a new form, let the system recoginize areas as fillable, etc, etc, etc. When i get to the calculations portion, same result...there are not many tutorials out there on this...sadly
Woking on a MAC...
I have acrobat X Pro
I created your sample.
name the field after Number of cars, as car
The calulation field named total

Disable auto-calculation of tax amount by Autoinvoices to import AR Invoice

Hi all,
I am using ra_interface_lines_all to do AR Invoices conversion to Oracle R12. My legacy invoices data contains tax amount and some of the invoices do not have any tax. Autoinvoice auto-calculated tax information during import even for those invoices that have no tax.
I checked my AR interface record and made sure none of the tax-related columns (e.g. tax_code, tax_amount, etc) are populated. I also checked the AR transaction source for conversion and make sure tax-calculation flag is not set.
Basically I need to set the tax amounts manually instead of letting the system to derive it. Some suggested to set tax_exempt_flag to "E". I tried but Autoinvoice complained that I need to have tax reason and besides I have many invoices that have tax amounts.
Any suggestions on disable the auto-calculation of tax?
Thanks! Mike

Hi Mike,
U r using transaction types to generate your distributions, right?
Try to insert distribution info for each of your invoices in the table ra_interface_distributions_all, specifying REC, REV and TAX (tax where applicable) lines.
Hope this will solve your prob.
Vik

Auto Goods Issue not taking place

Hii All
I hv Maintained backflush indictor in work center and in MRP2 view it is maintained as Workcenter
decides whether to backfluch .
But the auto goods issue is not taking place when the production order is saved and confirmed.
The stock remains the same ..
Can anybody tell the reason for that
Regds
Rakesh

Hi Rakesh,
what is the control key u have maintained in Routing?
if u r using Control key PP01 - Routing/Ref. op. set - internal proc., then after Production Order confirmation u have to do MB31- Goods Receipt for Order, with movement type 101.
If u r using PP03 Routing - in-house prod. auto. goods rct, then it accepts only single operation in a Routing (or) if u r having say more than one operations in a routing, then u have to give PP03 control key for the last operation.
I think u got it...
revert back if u have doubts.
Thanks & Regards,
Santosh

Auto calculation row, work around for mixed calc methods?

I have a problem with an auto calculation row. One of the columns in the report is a percentage so I want the total row to calculate using a column formula, instead of the Auto Calculation Row calculation method setting.
We're using the auto calculation row as a way to churn through many Entity members, displaying financial totals for 4 Account category groupings for each Entity member.
For each Entity, those 4 rows display the data they're supposed to, and the auto calc row generates the 'Total', which is the calculation method it is set to do. With 2 columns in play, it works like this:
A1 through A4 display data, and are summarised in [A][Total Row]
B1 through B4 display data, and are summarized in [B][Total Row]
An updated requirement for a % column came up, and now we're trying to get that to display properly in column [C].
[C] is created as a formula column
The formula is set to [B]/[A], and formatted to display 0.01 precision
We expect each row to use this formula, and for rows 1 through 4 it does.
However, for [Total Row], it does not calculate [B]/[A]... instead it calculates [C][1]+[C][2]+[C][3]+[C][4]
This makes sense in terms of what the 'auto calculation row' is designed to do, or as to how it is explained in FR documentation.
The calculation method is set to 'Total', so it just adds up all of the data.
But we're looking for a combination of settings or a work-around that permits the Auto Calculation row feature to be used with mixed calculations as I've described.
We're on FR 11.1.2.362
Thanks
Troy

gofer wrote:
Hi osgood, thanks for getting back, thanks for that suggestion, I think that's a nice way of going about it. The form is working great with the calculation but I still can't get it to work on the reply email back to the site.
This is what I've used in the PHP form;
$freight = $_POST['PROD_freight_1'];
$totalcost = ($chardonnay_2011_bottles * 20 + $chardonnay_2011_cases * 204) + ($pino_gris_2011_bottles * 21 + $pino_gris_2011_cases * 228) + ($sauvigon_blanc_2011_bottles * 20 + $sauvigon_blanc_2011_cases * 204) + ($riesling_2012_bottles * 20 + $riesling_2012_cases * 204) + ($pinot_noir_2009_bottles * 25 + $pinot_noir_2009_cases * 250) + ($PROD_freight_1);
This the code for the reply back to the site;
\n selection \n $PROD_freight_1
Cheers
The variable should be:
+ ($freight);
and
\n selection \n $freight
Does that work?

Query for Auto Calculation based on input of 2 Fields

Hi,
I would like to write a sql query to allow for auto calculation based on the Inputs of 2 other fields before Adding the Order.
For example. A query on Sales Order where I have Item 040634 (Code for a Flower) and Quantity 200.
I have a UDF (Bunching) where the value is 10, 15 or 20.
Based on the Bunching the result should be given in another UDF (Noofsleeves).
(Quantity) 200 / (Bunching) 10 = 10 (Noofsleeves)
The Order will be having multiple items where the Bunching can differ for each item.
Is it also possible to remove the calculated noofSleeves from Inventory.
I am using 2007A SP01 PL05

Hi ,
You may try this: Apply this fms on other udf and auto refresh on the udf mentioned in the query (in your case Bunching).
SELECT $[RDR1.Quantity.number] / $[RDR1.U_UDF.number]
You may check these too.
cALCULATION OF udf ON UNIT PRICE
FMS
Thanks,
joseph
Edited by: Joseph Antony on Jul 8, 2010 12:31 PM

Does Adobe Reader Touch for Windows 8 support forms with auto calculation?

I'm using a preformatted form that contains auto calculations. When I use it on Adobe reader 11 on my laptop, it works. However, when I use the Adobe reader app for windows eight the auto calculations do not work. Is there anything I Can do?

Adobe Reader Touch (Windows Store app with "Modern" UI) does not support JavaScript yet. Thus, auto calculations or field formatting will not work.
If your operating system is Windows 8/8.1 (Pro), not Windows RT, you can install and run Adobe Reader XI (desktop app with classic UI).
If your operating system is Windows RT, you may want to try Microsoft Reader (the built-in PDF viewer by Microsoft) to see if auto calculations work.

Should I spend the $280.00 to have Canon fix my 70D auto-focusing issue?

Should I spend the $280.00 to have Canon fix my 70D auto-focusing issue? Or just return back to my very much trusted Rebels?
Solved!
Go to Solution.

MelekalsCanon wrote:
Very much appreciate your taking time to send a response. As a new user I wasn't sure if anyone would bother. Allow me to add a little more to my first post. I fit in that niche between amateur and a person with clients. For over 10 years I have covered events for a non-profit agency capturing the look and feel of 20+ events per year and was given permission to purchase a few cameras over the year. My decision from the beginning was to use the Canon Rebel. Images were spot on and only once did I have an issue with one of them (after shooting outside events in 105 degree temps for 3 days).
So, when I retired a year ago it was for me a pretty simple choice to get a Canon for myself - especially since at that time the 70D was on the cover of magazines and was very highly touted. I also did a lot of desktop publishing and photo editing which helped me realize I wanted the best sensor, sharpness, resolution and lens I could afford - the 70D. My post was actually a result of reading many online responses including your very informative replies about the 70D focusing issues. My biggest concern is that I will spend several hundred dollars and maybe, just maybe get back a camera which captures better focused images, but still not as sharp as the lower end Rebels I was using. I had hoped to purchase my first "L" lens and really get excited - not repair the most expensive camera I've bought to date.
Thanks again and before it gets noted by someone...yes, I should have pushed this issue sooner and then at least the warranty would have covered the cost. An expensivve lesson learned. But I will have to add that at least one authorized Canon repair dealer told me they have had several folks feel like I did - that it was the photographer/me as a new user having the issue and not the camera. I now know it's my camera.
Let me clarify that I don't own a 70D, so anything I say about it is from watching what others have said, mainly in this forum. But it is disconcerting to see so much complaint about a camera that's supposed to have an innovative focusing system. One is strongly tempted to suspect that they went overboard in trying to make the camera serve both still photographers and videographers.
That said, I'm not a great fan of the Rebel line, because they lack autofocus microadjustment and I have at least one otherwise excellent Canon lens that would be useless without it. (The 70D does have AFMA, a point in its favor.)
As far as spending the $280 for the repair, I understand why it's a hard call. If I were in your shoes and were convinced that Canon understands the issue and would fix it correctly and permanently, I guess I'd go for it. If you don't think they do, but fell that you need something a cut above the Rebels, this may be a good time to buy a leftover or refurbished 7D. Even though I now have a 5D3, I still use my 7D's a fair amount and have been very happy with them. And the 7D2 has gotten such a favorable reception that's it's almost bound to make more 7D's available at a decent price.
Bob
Boston, Massachusetts USA

Auto calculation on SmartList?

I have a SmartList called "PRIORITY". In a Planning form, users assign Category 1, Category 2, Category 3 priority ranking to a Line Item (project).
In Financial Reports v 11.1.1.2 (Planning db connection), I have a grid which pulls in Line Item, Dept, Project Name (text input), on rows. PRIORITY is a column header. Users want to see sub-total by Category (1,2,3) when the report is pulled. Is it possible to do this via an auto-calculation, or some other method?
Thanks in advance for any suggestions.

Could you help me in this please?
How can i add a script to override the below auto calculation? knowing that COST is auto calculated as well and Group1 is a radio button group.
var oFldSel = this.getField("Group1");
var oFldSub = this.getField("COST");
event.value = oFldSub.value * 4; // assume no discount;
if(oFldSel.value == "yes") {
// compute discount
event.value = oFldSub.value * 0.8 * 4;

Essbase Calculation issues from version 6 to 7

Hi does any one know are there any calculation issue with essbase BSO cacl engine from version 6 to 7. Cube which calculates fine on 6 verison never ends to finish on version 7, does any one have ideas about number of max generations and levels possible under dense dimension in verison 7

Not sure if it was a 6.5.1 to 7.1.5 issue, or if it was that 6.5.1 was on Win2K and 7.1.5 is on Solaris 5.9. But, I had one calc script that for total company on Windows and 6.5.1 ran in about 2 1/2 minutes, but same calc on same outline on Solaris and 7.1.5 ran in over 2 hours.
Hyp support was able to offer some suggestions on Unix settings, and some undocumented script features that got the runtime down to around 10 minutes, but didn't get any farther than that.
Luckily for me there also was some functions that were not resolving correctly in the script so I had to take the functions out (turned a 100 line script into an 800 line script), and wouldn't you know it that fixed the slow run time as well.
Message was edited by:
RobertR

Whether it is possible to make auto goods issue below safety stock level

Hi SAP Gurus,
I am implementing MRP for generating stock transfer Planned orders from a Main Mother Plant to different Plants. We have defined a Safety stock level for materials at main Plant level.
There is a auto program available for generating auto goods issue against Purchase orders.
System picks up Qty as long as unrestricted stock exists for the material during auto goods issue.
System dont pick up any Qty below safety stock level (manual goods issue works below safety stock level).
We are defining safety stock to meet sudden requirements and have time for new procurement.
But it should allow us to do auto goods issue below safety stock level.
Whether this is possible and what need to be done ?
Thanks and Regards,
R.Velmurugan.

Hi Velmurugan,
I don't think auto GR is a problem from safety stock. Auto Gr can be done by two ways.
1. Control key and assigning the control key in operation(Preferably in last operation)
2. In production scheduling profile you can do it. You have to assign the production scheduling profile in material master work scheduling view.
Regards,
Krishnendu.

Auto-Brightness Issue. It randomly worked, then stop working all together.

Auto-Brightness Issue.
It randomly worked before, now it's not giving off any brightness at all. Unfortunately it stopped coming on all together. I tried updating it Itunes and it comes back on but tried to restore my Ipod touch. After restoring it, it said "restore error -50" and the backlight STILL doesn't come on, not even a flicker. PLEASE HELP!!!

Okay I tried to restore using iTunes and a little screen came up stating: An error occured while restoring this iPod (-50). I don't know what that means. It still ask do I want to continue to restore, but always gives me that same message. To make matters even worse, there is no Apple store in my town. The nearest is 3 hours away.

Income Tax Calculations - Issue

Client is saying that as per their existing SAP system, the Income tax calculation is made on Gross salary. And they are saying that if any additional taxable payout is made in a month to an employee, then the total tax on this additional payout should be paid by the employee in the same month. So basically his total tax would be the (general regular monthly tax + total tax on the additional payment), which as per them the system is not calculating correctly since October 2010.

Hi,
Thanks for your reply Jurgen & Remi. I am pretty new to Payroll & this is India Payroll.
Now, the issue is how should I proceed ahead.
1. The client says that the wage types are already configured in the system in such way that on certain wage types, the tax which is calculated is paid in the same month. Can u pls inform that which processing class & cumulation class do I need to check in Table 512w_d for this wage type.
2. As I need to see this whole functioning in Schema, pls guide as to where I should check this whole tax calculation in Schema.
3. The function I have heard which is used is India for Income tax is INTAX.
Looking forward to your reply.
Thanks a lot!!!
Edited by: SAP ST on Nov 25, 2010 7:24 PM

Spry Menu Bar 2.0 auto-width issues for sub items

I am testing the spry menu bar 2.0 and it displays perfectly in IE 9.0/8.0 but the auto width is not working for Firefox (testing 3.6.16), Chrome (testing 10.0.648.205), or Safari for windows. Content is being driven by PHP and MySQL. This is the first time I have come across something working better in IE than the other browsers. Great job on the IE patch script. How do I get the other browsers to cooperate? I moved the in page CSS generated by the widget browser to it's own CSS (called spry_menubar2_horizontal_sample_layout.css) and am including the files below in the head. The links below point to an exact copy of the files as the working copy of the files is located elsewhere.
SpryMenuBasic.css - link
SpryMenuBasicSkin.css - link
spry_menubar2_horizontal_sample_layout.css - link
SpryDOMUtils.js - link
SpryDOMEffects.js - link
SpryWidget.js - link
SpryMenu.js - link
SpryMenuBarKeyNavigationPlugin.js - link
SpryMenuBarIEWorkaroundsPlugin.js - link
the in page script is loacated directly under the <ul> lists.
Similar example with php removed:
<div id="navigation">
    <ul id="MenuBar">
      <li> <a href="http://www.videoonpointe.com/">Home</a> </li>
      <li> <a href="#">Gallery</a>
      <ul>
        <li> <a href="#">View Gallery</a></li>
        <li> <a href="#">Select Gallery</a>
          <ul>
        <li> <a href="#">Main Gallery</a>
          <ul>
            <li> <a href="#">a gallery</a></li>
        </ul>
        </li>
      </ul>
      </li>
        <li> <a href="#">Edit this Gallery</a></li>
        <li> <a href="#">Create Gallery</a> </li>
        <li> <a href="#" onClick="return confirm('This action cannot be undone. Are you sure?');">Delete this Gallery</a></li>
      </ul>
      </li>
            <li> <a href="#">Photo</a>
          <ul>
            <li> <a href="#">Edit Photo</a> </li>
            <li> <a href="#" onClick="return confirm('Deletion of this image cannot be undone. Are you sure?');">Delete Photo</a> </li>
            <li> <a href="#">Set as Gallery Thumbnail</a> </li>
            <li> <a href="#">Change Watermark</a> </li>
          </ul>
          </li>
      <li> <a href="#">Pricesheet</a>
        <ul>
          <li> <a href="#">Pricesheet Admin</a> </li>
    </ul>
      </li>
   </ul>
<script type="text/javascript">
var MenuBar = new Spry.Widget.MenuBar2("#MenuBar", {
           widgetID: "MenuBar",
           widgetClass: "MenuBar MenuBarLeftShrink",
           insertMenuBarBreak: true,
           mainMenuShowDelay: 100,
           mainMenuHideDelay: 200,
           subMenuShowDelay: 200,
           subMenuHideDelay: 200
</script>
</div>
Has anyone encountered this issue before? Any thoughts on how it can be fixed? Thank you for your help.

I am surprised no one has responded yet. Surely someone has encountered this before. Any thoughts?

Auto calculation issue

Similar Messages

Maybe you are looking for