Auto Capture Display Options

We are testing the auto-capture mode tethered to a Nikon D-80 through Nikon Capture Pro. It is pretty slick, and so far Lightroom is the best we have seen at doing this. Nice to see some support for tethered photos.
Question:
At times we'd like to display the last picture taken, show a new picture on the screen as it is captured / imported. Do a little editing then continue shooting / showing last picture taken.
And at times we will editing / browsing while shooting and do not want the 'loupe' to display the latest import, just import it to the end of the list.
How can this be done?
Thanks for your interest,
Net & Den
Netties Petties LLC

While the PowerJolt will charge the iPhone, it (has been reported here & other sites) will NOT keep up with battery drain from using the features I mentioned. It's also been reported to induce massive amounts of interference into the audio... both playback & phone functions.
No, and No.
The SE model, the simplest model they make, does in fact keep up with the power drain from continuous use. (Well the longest of my tests was about 5 hours, but I was driving around a 3G area and on the phone pretty much the whole time, and at the end of the period my battery was full). I also use bluetooth all the time.
I have never heard any interference, on any radio band, Am Fm or Xm.
But I tell you what, for $19.99 you can test it yourself.
Also, if your 27 users drive as part of their employment, you can also save yourself some law suits by buying your 27 drivers a bluetooth device, because the first accident they get into while surfing the web on 3G when they should have just been taking hands free calls on Edge will cost you way more than the bluetooth devices.

Similar Messages

Problems with Auto Capture

Hi - we are evaluating the trial version of Captivate to see
whether we can create demos/tutorials of our desktop software.
We're using auto-capture to record screen actions, so it does a
screen capture each time we use the mouse to click a button. When
we look at the slides after capturing them, many of the slides show
random parts of the underlying window superimposed over the dialog
box, as though the screen was captured while it was being
refreshed. So I have 2 questions:
1. Is there any way to prevent this from happening?
2. If not, and if we need to use manual screen captures to
replace any gunked-up automatically-captured screens, how do we
move the mouse click action from the auto slide to the equivalent
manual slide? Captivate will let us move other things on the
timeline between slides, but doesn't seem to want to let us move
the mouse object.
I'm sorry if this isn't clear; we're still quite new at this!
Thank you.
- Alma Taylor-Smyth

Hi Alma Taylor-Smyth and welcome to our community
Note that you can actually use a
combination of manually pressing print screen to take
additional screen captures. So as you use Captivate, you can easily
supplement your auto captures with manual captures. Unfortunately,
there is simply no way I'm aware of to prevent those screens
(partial or blank) from being recorded. Captivate runs locally and
captures very fast. So if that screen hasn't had time to properly
render (as is often the case with Internet/Intranet applications)
it grabs the screen in partial and empty states sometimes.
As for the mouse movement, note that all Captivate really
records is the ending point and whether there is a click or not. If
you right click the slide, you can easily point at Mouse and then
"Show Mouse". Then configure the ending point, desired click
actions and other options. (to get at these options, double click
the Mouse object in the Timeline)
Hopefully this helps... Rick :)

Rich text box used in Infopath Form not displaying option to get images from Computer

Hello,
We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
Options available are : From Address, From SharePoint
But if we Rich text box in list, then it works fine with "From Computer" option.
can you please help me out to get this option.
Thanks in advance.
REgards,
Jayashri

Hi,
From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
Visual Studio Tools for Office:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
Thanks,
Dean Wang

Calendar display options

How can I change the display options for iCal on an iPad Mini? I hate to always having to scroll in weekly view and would like to see the whole day without scrolling.

angelwoman,
Apple has not made that a feature of the iOS Calendar App.
You may want to consider providing Apple - iPad - Feedback.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

How do I get the "auto portrait/landscape" option to show during printing in Adobe Reader Touch

When I print using Adobe Reader Touch, the "auto portrait/landscape" options does not show up. As a result, all pages in a document are printed in the same orientation even if they are not all of the same orientation in the file itself. I don't believe this is a printer issue because if I use Adobe Reader X (v. 10.1.6) on the same computer/printer, the auto option does show up and the documents print as desired. I use Windows 8. As the video quality of Adobe Reader X is extremely blurry in Windows 8, I would like to be able to use Adobe Reader Touch exclusively. How do I get the latter to give me the "auto portrait/landscape" option during printing?
Thank you,
Pelle

Hello Pelle,
Thanks for the feedback. Our printing code in Adobe Reader Touch doesn't have that capability right now, but since you mention it we should probably do what you're requesting by default. I'll put that into our backlog for a future update, but I can't say yet when it will be available.
In the interim, if you have pages that are different orientations, you can print them in blocks manually to get what you want, but I understand that's a hassle.
Dennis

ITunes 7.0.1.8 Freezes Windows when Cover Browser display option selected.

When I select the Cover Browser display option for Music Library the entire operating system freezes within 3 seconds after the button is selected. After rebooting and deleting all music and selecting the option the freeze did not occur. I reimported a CD and tried again and the freeze occured again. ITunes works fine otherwise.
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro

I setup a new user on the computer. The problem does not happen under new user.

Document type wise PO with display & optional purchasing group.

Dear All,
we have six document type from NB1 to NB6 every document type has separate no ranges, & having three field selection as Me21n, fof, NBF,
in Spro MM Define screen layout at document level, in that we assign document type NB5 & attach field selection FOF in that purcahsing group is optional.
same other dovcument types we assign field selection Me21n & we assign purchasing group is Display option.
our requirement is that when i select documenyt type NB5, purchasing group will optional not in display.
But system shows display & we cant do PO.
Please guide me or any other config.
Thanks
Shital

Hi,
System is giving first preference to Field Selection Key ME21N, so you have to reverse the condition.
Maintain ME21N as optional and assign document type NB5 to it and
For other dovcument types Create another Field Selection Key with purchasing group as Display option and
assign that field selection key for purchasing group is Display option.
Regards

Document Display Options from portlet

How do I gain access to the user setting for the "Document Display Options" from a portlet? I want my portlet to honor this setting when creating links for the user to click on such that they open in a new window or in the main browser window as specified by this setting.
This option is set on the Display Options page of the My Account editor.
thanx!

Instead of using
<f:selectItem> use
<f:selectItems>.
Pass list to this componenet. is this your question?
Message was edited by:
KrishnaS

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)

Hi, I'm En32, now trying to publish my first iBooks (epub).
The package I created is always rejected to deliver with following error.
Does anyone who can provide me a solution ?
=== error ===
Package Summary:
1 package(s) were not uploaded because they had problems:
 /Users/En32/Music/iTunes Producer/Playlists/10000448204.itmsp - Error Messages:
 Apple's web service operation was not successful
 Unable to authenticate the package: 10000448204.itmsp
 ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)
===
$ cat META-INF/com.apple.ibooks.display-options.xml
<?xml version=”1.0″ encoding=”UTF-8″?>
<display_options>
<platform name=”*”>
<option name=”fixed-layout”>true</option>
</platform>
</display_options>
===
Actually, I'd like to use fixed layout so I use com.apple.ibooks.display-options.xml.
This ePub file looks good because I can open it with my iPad - iBooks, however iTunes publisher always rejects this.
Any solutions ?

I was getting that error when I used OSX's default compress feature. I found a little utility called ePub Zip and used it to compress (zip) my ePubs and that did the trick. They then passed the validation. I got it here:
http://www.mobileread.com/forums/showthread.php?t=55681

Display Options in Acrobat X

Hi,
I'm looking to find the Display Option tab in Acrobat PDF Maker X but can't find it, specifically I want to be able to set Document Open Options. In Acrobat 5, there was a Display Option tab which allowed you to set Bookmarks and Page using a radio button and the Open Magnification from a drop down.
Are these options in Acrobat PDF Maker X?
Any information is appreciated.
Thanks

Hi,
Thanks for the reply. I was hoping that you could specify these options before you generate the PDF, you could do this in Acrobat PDF Maker 5.0
Date: Wed, 20 Apr 2011 13:34:37 -0600
From: [email protected]
To: [email protected]
Subject: Display Options in Acrobat X
You can set this options in Acrobat X. Look at the properties of the document.
>

When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons

I am using Oracle portal 9.0.2 version
When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons
Default Search Results Page
This Search Portlet
An unexpected error has occurred (WWS-32100)
User-Defined Exception (WWS-11230)
Unknown Exception (WWC-45131)
ORA-20101:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWPOB_API_PAGE", line 3369
ORA-01403: no data found
ORA-01403: no data found (WWC-11230)
No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
Error: An unexpected error occurred: User-Defined Exception (WWC-43000)
Please help me with this one
P.S I tried to run inctxgrn.sql, but it did not solve the problem

i solved the problem by runing 2 scripts as a portal user
You can refer to bug - 2418089. This was fixed in 9.0.2.3
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpageid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpagesiteid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
NOTE - The difference is the value of 'p_name' attribute. If u see carefully it is 'searchresultpagesiteid'. The first time u run this the value is 'searchresultpageid'.

Sleep Display Option in 10.4?

Hello Discussions,
Does anyone know if the 'Sleep Display' option available in Exposé in OSX Leopard is available for Tiger?
Perhaps a script or third-party piece of software?
Thanks for any advice.
Cheers, R.

Thanks Dale,
A little mis-understanding here
Yes I know that the Energy Saver can sleep the display, however, this is after a period of time.
In Leopard, you can sleep the display immediately as an option in Expose, which seems to be absent in Tiger.
I was hoping there was a workaround for it.
http://tinyurl.com/39m3lx6
Cheers, R.

Default display option in MB51

Hi Folks,
Can anyone help me in setting up a user specific default DISPLAY OPTION in transaction MB51.
Expecting an early reply.
T H A N K S,
Sugopa

Hi,
below link might help you
http://help.sap.com/saphelp_erp2004/helpdata/en/b5/2f2671d6f511d3b7f30000e82de955/frameset.htm
what is your requirement.
is this what you want when a user executes MB51 then the options should be default one if so
enter tcode MB51
go to system-user profile-set data and execute.
when ever you execute MB51 all the time the same data will be there.
is this your requirement if not getback......
if it helps and solves your problem reward points and close the thread
regards,
venu.

Auto Capture Display Options

Similar Messages

Maybe you are looking for