Auto check return PO flag in ME59

Please can anyone help
When we create returns purchase orders using ME59 or ME59N we need the return PO flag (EKPO-RETPO) is be checked automatically as it is when they are created using ME21N.
Thanks

Hi
As you know ME59n is used to create automatic purchase order from requestion
In PR we don't have facility to mark return indicator its internal doc,
and for every po you want return indicator in ME59N
i don't think its possible still check with your abaper or any userexit is there
Regards
Kailas ugale

Similar Messages

  • Data transfer error when checking the Return vendor flag (LFM1-KZRET)

    I am working on a conversion program to update Vendor Master with return vendor flag (LFM1-KZRET). When ever i do it manually it works fine. But, if i try it through recording or BDC program i get an error saying '
    It is not possible to copy data from field 'Returns with shipping proc.'. Please can any one let me know if there is any other method to update this data or any OSS notes to be implemented to solve this error.
    The problem is only occurring when we try to update the field while doing recording or BDC.

    Hi Rob,
    I have already checked the note 964533 and i feel that its the solution to my issue. But our system is on release 500 and this note only supports release 600. We were not allowed to implement it on release 500. I have sent a customer message to SAP for asking the possibilies of implementing this note on release 500 and regarding any side-effects and waiting for there response. Thanks for your help and just want to know whether you have ever faced this issue.
    Satish.

  • Massive Update of Return Vendor flag and creation of Customer Data

    Dear.
    For many vendors I need to run a massive update of return vendor flag of purchasing data and creation of  the linked customer.
    I have tried to create a batch input recording using LSMW but the system send an error message WY164  It is not possible to copy data from field 'Returns with shipping proc.'
    How can I solve this problem ?
    Or do you know another solution to run a massive update of return vendor flag of purchasing data and  creation of  the linked customer ?
    Thanks

    hi,
    Pls go through the SAP note 447070...
    This may solve the problem...
    check it once..
    Regards
    Priyanka.P

  • Could Not execute auto Check for DISPLAY

    Aloha!
    I'am about to install 11g R2 on OLE5 and i set the display variable using "DISPLAY=<machine-name>:0.0; export DISPLAY". Upon installation " ./runInstaller " im having this error "Could not execute auto check for display..."
    Can i undo the command mention above?
    Thanks for the help.
    hades

    Aloha!
    "2. echo $DISPLAY << what it returns?"
    value is 0.0
    Having the same error..or i can still continue with the installation?
    [oracle@ole5 database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 80 MB. Actual 34646 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 5087 MB Passed
    Checking monitor: must be configured to display at least 256 colors
    >>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,
    Continue? (y/n) [n]
    Thanks,
    Hades

  • Where did "Auto-Check Mail" go?

    I was trying to check if my auto-check was enabled and I can't find it. I did some searching and found this article.
    It says to go to Settings > Mail > Auto-Check. But when I go to Settings > Mail there is no Auto-Check. I only see:
    Accounts
    Yahoo!
    Add Account...
    Messages
    Show
    Preview
    Minimum Font Size
    Show To/Cc Label
    Ask Before Deleting
    Sending
    Always Bcc Myself
    Signature
    Default Account
    I see nothing about Auto-Check. If I go into my default account (Yahoo!) I see:
    Account (ON/OFF)
    *Yahoo! Account Information*
    Name
    Address
    Password
    Description
    Advanced
    Within ^ Advanced I see:
    *Mailbox Behaviors*
    Drafts Mailbox
    Sent Mailbox
    Deleted Mailbox
    Deleted Messages
    Remove
    *Yahoo! Settings*
    Use push mail (ON/OFF)
    I don't remember having this much trouble finding it before. Is there something wrong with my iPhone, or did Apple change it in an update and I haven't heard about it?
    Thanks for any help.
    Maybe I'm just tired and it's staring me right in the face. I dunno...

    Hello Garner, this is what to do, from iphones main screen go to settings, then mail, tap on your Yahoo account, tap advanced, you will then see an option to turn Push email on/off (provided you have 1.1.1 software on your iphone) toggle Push off, return to the main screen, go back into settings, select mail, you will now see the option for auto check- manual, 15min, 30min, 1hour. Hope this helps, Steve...

  • Where is the auto check for Mail?

    Before the 2.0 update, I could set the Mail app for auto check every 30 minutes or so, not in 2.0, I cannot find this option any more. Can I still make this setting somewhere?
    André

    The setting is in Settings > Fetch New Data. Set Fetch to 30 min (other options are 15 min and hourly).
    You'll want Push set to OFF, unless you have a need for it and your email account supports it (MobileMe, Yahoo, or an MS Exchange server do); push uses a lot of battery power, so if you don't have a need for it, leave it off.
    Hope this helps...

  • Auto Check Number printing

    Hi experts,
    We are using SAP Business one 2007 B PL 015. we have used copy express for pushing master data from one database to another. The newley configured system has a challenge. we have not configured the auto check number but when i enter check number manually in out going payments and add the document the check number remains the same,but when i go for checks for payment and priny my check system is automatically changing my check number and printing. The check number mentioned manually is vanished and the new check number  is saved in out going payment.
    Can any one help me out in resolving this issue ASAP.
    thanks in advance.
    Regards,
    Nani

    Hi Gordon,
    Earlier also it was manual and now also they are using manual but system is automatically pulling the next check number. To test that i had created a new database and posted an outgoing payment system is automatically updating the check  number with 1. The issue is S1 so any one please help me to resolve this. Iam thinking to post to service.SAP . shall i bcoz iam unable to find the solution to this issue.
    Regards,
    Nani

  • Could not execute auto check for display colors using command /usr/

    I am trying to Install Oracle 10g R2 on Solaris X86 32 bit
    I am connecting to system from my windows vista laptop through putty... I get the following error...
    $ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 1214 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 1799 MB Passed
    Checking monitor: must be configured to display at least 256 colors
    >>> Could not execute auto check for display colors using command /usr/openw
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n] n
    User Selected: No
    Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
    I have done the following:-
    # DISPLAY=192.168.1.133:0.0; export DISPLAY
    # echo $DISPLAY
    192.168.1.133:0.0
    # xhost+
    xhost+: not found
    # xclock
    xclock: not found
    I know that I have to do the following:-
    1. Install SUNWxwplt package ========> Is already Installed
    2. Set DISPLAY variable
    3. Execute xhost + on target (set in DISPLAY) computer
    # pkginfo -i SUNWxwplt
    system SUNWxwplt X Window System platform software
    Some sites claim xming and some xwindows etc.... Plz give me a step by step instruction as how to overcome this..
    bash-3.00# /usr/openwin/bin/xclock
    Error: Can't open display:
    bash-3.00# DISPLAY=192.168.1.133:0.0; export DISPLAY; echo DISPLAY
    DISPLAY
    bash-3.00# echo $DISPLAY
    192.168.1.133:0.0
    bash-3.00# /usr/openwin/bin/xclock
    Error: Can't open display: 192.168.1.133:0.0
    bash-3.00# pwd
    bash-3.00# find . -name xhost
    ./usr/openwin/bin/xhost
    ^C
    bash-3.00# /usr/openwin/bin/xhost +
    /usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
    bash-3.00#
    # echo $PATH
    /usr/sbin:/usr/bin
    I have also gone through the below ... but was not of much help
    Unable to execute runInstaller: Check if the DISPLAY variable is set
    Plz help
    Edited by: [email protected] on Feb 11, 2009 5:16 AM

    bash-3.00# echo $SHELL
    /sbin/sh
    bash-3.00# echo $DISPLAY
    bash-3.00# DISPLAY=192.168.1.133:0.0;export DISPLAY
    bash-3.00# echo $DISPLAY
    192.168.1.133:0.0
    bash-3.00# /usr/openwin/bin/xclock
    Error: Can't open display: 192.168.1.133:0.0
    bash-3.00# man xclock
    No manual entry for xclock.
    bash-3.00# /usr/openwin/bin/xhost +
    /usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
    bash-3.00#

  • After installing SL: autochk program not found - skipping auto check

    My MacBook was setup to dual boot Leopard/Win XP via Boot Camp, but I just formatted the Leopard partition and installed Snow Leopard in its place, which boots wonderfully, but now when I boot Win XP I get this error: "autochk program not found - skipping auto check"
    Seconds later the machine automatically reboots.
    I booted off the Win XP disk and ran chkdsk /p in the Recovery Console, but the "autochk not found" message still kills the Win XP boot.
    Snow Leopard and Win XP are in different partitions on the same drive. I only formatted and reinstalled the Mac OS partition, I did not format or reinstall the Win XP partition.
    Help?

    I have the same problem. I had decided not to upgrade Parallels from version 3.0 since hardly (or almost never) use windows programs any more. I did want the option of using Boot Camp and Windows if ever needed though.
    I installed Snow Leopard knowing that Parallels would no longer work and later did an uninstall. When I tried a restart to open Windows from Boot Camp I got the "autochk not found" message.
    Searching around I discovered that Parallels changes the disk table so that the OS can only boot from within Parallels. The problem appears to be a way of changing the disk table back to a setting that will make it boot normally. There is a utility available for doing this on a windows PC, but I've found nothing for the Mac yet.
    Without doing a complete re-install of Windows OS, I'm stuck for another solution.
    In the end I may just have to erase the drive (the Windows partition) and be done with it for good. What upsets me is that Parallels should have created an uninstall utility that reverted the disk table back to normal boot settings.

  • Auto-Check Not Checking

    I have my iPhone's setting to check for new e-mail every 15 minutes. However, it does not automatically check every 15 minutes. It winds up not checking until I go into the mail account to see if I have any new e-mail. I have both Yahoo and AOL accounts on it. How can I resolve this issue, so that it will check for my email?

    I forgot to include that I tried turning off the recent mode but that made it so I couldn't receive email at all, even using the manual check. It would connect and check for mail and the new email counter would go up to 25 and then it would finish without actually showing any of the new messages. Strange.
    The auto-check has worked a few times since I first posted about this - I'll update if I figure it out.
    Thanks!
    iMac (Intel) iPhone
    iMac (Intel) iPhone

  • Mavericks Mail won't auto check

    I have Mail preferences set to check Mail every five minutes which it has done correctly forever. Just yesterday, I noticed it is no longer checking mail automatically. I have to check manually in order to retrieve new emails. (I have set and reset the mail-check preference choice to no avail.)
    I assume maybe a preferences file has gotten corrupted (?). Is there a pref file I can delete that might allow me to restor auto-check in Mail without it deleting all my other Mail settings?
    Thanks for any help,
    WK

    Hi William,
    Thanks for visiting Apple Support Communities.
    It sounds like you are encountering this symptom:
    For some email providers, new email messages in Mail may only appear to arrive when Mail is first opened. No new email arrives until Mail is quit and reopened.
    You may want to verify this by testing the workaround in this article:
    OS X: New email messages not received until Mail is quit and reopened
    http://support.apple.com/kb/TS5367
    Best,
    Jeremy

  • Auto check in Mail App on iPhone 4

    Hi,
    Sometimes the Mail App automatically checks for new e-mails and alerts me... but not always.
    A few times in the last couple of weeks I've missed staying in "live" contact with friends because the Mail App did not check for new messages at all until I began to compose a new message and the app would then download the e-mail hours after it was sent.
    I've googled the issue but the only thing I can find is to use "auto checking" in Settings, but that does not exsist anymore it seems.
    Can anyone help?
    Cheers

    New emails should automatically get pushed onto your device; however if you have read your emails on a different computer or device it will still show as unread on your iphone.
    follow the following steps make sure that they are right:
    Settings
    Mail Contacts Calendar
    Fetch new Data
    Ensure that “Push” is on
    Ensure that “Every 15 Minutes” is selected
    Go down to advanced
    Select the accounts outstanding and change them to “Push”

  • Iphone missing auto-check messages

    I just got my wife an iphone and when I went to set her auto-check for her email in her settings she doesnt have that option.....anybody have any ideas? Thanks!

    Push-IMAP is an IMAP protocol that doesn't require the incoming mail server for the account to be checked for new messages. As soon as a new message arrives at the incoming mail server for the account, the server "pushes" the message to the email client being used to access the account - in this case the iPhone's email client because a free Yahoo Push-IMAP account can be accessed with the iPhone's email client only - not with another email client on your computer.
    You have the option on the iPhone to access the account as Push or standard IMAP with the option to check the incoming mail server for new messages as with any standard email account.
    The Push protocol is designed to save battery life but you may find this isn't so.

  • Anyone know why the Auto Check feature is not on my iPhone?

    When watching the Finger Tips it shows under settings then mail there is an auto check feature. I am missing it

    No problem. The rationale for it is that, since Yahoo emails are supposed to get "pushed" to the iPhone, you don't need AutoCheck.
    The problem of course is that yahoo push email has not been very reliable for some people.
    The way around this is to set up another (non-Yahoo) email account on the iPhone, even if you don't plan to use it. This will make the AutoCheck feature show up, and you can turn it on to catch the emails that don't get pushed.

  • Checking return of new operator

    I am a C++ developer just starting out on Java. I understand the concept of the new operator very well. I've been reading a Java book to see how Java uses/handles the "new" operator. None of the explanations or code examples say anything about checking for a null result when using the "new" operator. This concerns me especially when I see code for creating GUIs that look something like:
    // menu items
    JMenuBar MainMenuBar = new JMenuBar();
    JMenu FileMenu = new JMenu();
    JMenu EditMenu = new JMenu();
    JMenu HelpMenu = new JMenu();
    {etc...}
    and then immediately start accessing the objects with code like...
    FileMenu.setText("File");
    FileMenu.setActionCommand("File");
    FileMenu.setMnemonic((int)'F');
    MainMenuBar.add(FileMenu);
    How do we know we actually have a valid object? What if it isn't valid, will Java throw an exception if we try to access it? I assume Java will return NULL if the object could not be created? If so, is there a preferred "Java design" for capturing such an error... 1) check return from "new", or enclose in "try" block and catch exceptions?

    Also, Java constructors can
    throw exceptions. (Whether or not they should
    is another matter.)Are you saying that constructors shouldn't throw exceptions? Why? I think that constructors should do the minimal amount necessary to correctly initialize an object to avoid having to throw exceptions. However, there are cases when throwning an exception is a good idea. Yes, the object will not be properly initialized but if there's an exception then the object is likely unusable anyway. It seems like a good idea to let the client know this through exceptions.
    Thank god we don't have to check the return from the new operator! That would be a nightmare.

Maybe you are looking for