Auto clearing the ZAA cache for bundles?

I vaguely remember something about this in past versions, but I can't seem to find this info in the documentation.
Is there a way to have the content on the managed device (ie, the cached stuff) be auto-deleted when a bundle assignment is removed?
I know there's a way to uninstall said software, but let's say you don't want that, you just want the cached stuff to go away automatically.
Is this ability in ZCM?

kjhurni,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Clear the Browser cache while Outputting PDFs

Hi,
I am using Servlet to output a PDF (Streams), i am facing Browser cache problem in IE
since i am setting Content type to PDF as follows...
response.setContentType("application/pdf")
i could not able to use follwoing Clear the Browser Cache
response.setHeader("pragma", "no-cache");
response.setHeader("Cache-Control", "no-cache");
response.setHeader("Cache-Control", "no-store");
response.setDateHeader("Expires", 0);
the above code is not working fine in Netscape but not in IE.
Can any one help me out in this.
Regards
SAM

Hi,
I have a problem with pdf file also, everything working fine in IE and
netscape, but when I tried the streaming of pDF document from my
servlet in response to a request from Opera browser it failed.
the url may give some idea,
http://localhost:8080/pdf/pdfdownload?PDF_FILE=abc.pdf
here pdfdownload is my servlet, and code I used to stream like following
public service(HttpServletRequest req,HttpServletResponse)
ServletContext sc=getServletContext();
String mimeType=sc.getMimeType((String)
req.getParameter("PDF_FILE"));
res.setContentType(mimeType);
File pdf=new File((String)req.getParameter("PDF_FILE"));
res.setContentLength((int)pdf.length());
InputStream in=new FileInputStream(pdf);
OutputStream os=res.getoutputStream();
byte[] buf=new byte[1024];
int count=0;
while(in.available>0)
count=in.read(buf);
os.write(buf,0,count);
the detailed code kept out for simplicity, but the idea is pretty
much is this.
Now, opera opening the stream for a file name pdfdownload and
storing locally and then opening my acrobat reader, the second
time if called it trying to create another file by name
pdfdownload (1)? xxxx where ? is an unknown character, this is
where it's failing, unable to create the file so failing to open
the pdf file. what best process would be to follow in servlet so
the streaming works in all browser, I have seen many link in sun
sites, opening up pdf but it seems they all are stream, and my
opera can identify their size and file name distinctly and saving
them accordingly, any solution ???
thanks
Jishu

How can I clear the DNS cache?

I haven't been able to connect to my local Library since January. When I key in the URL, it starts the access routine and then after about 20 minutes, I have to kill it because nothing happens. I contacted the IT folks at the library and was told that they had made a few changes around the time my problem began so maybe the DNS cache was still pointing at the old info. He recommended that I enter TERMINAL mode and try to clear the DNS cache, using "sudo dscacheutil -flushcache" command. . I attempted this several times, even changing my applid password, and kept getting invalid responses.

I did try that and after a few trys it finally worked. It took quite awhile for the window for the library to finally come up, but it did and I am now able to get in and out with no problems with my library access. Now when I call up my bank, parts of it don't come up and it kicks me out. Now, I'll have to search for what fixes that - as it has happened before, so I know it's fixable. Thanks for you help though.

Clear the page cache

Hi,
We have recently started to develop our application on Solaris, before each regression test is run we need to clear the page cache so that performance is consistent. On Redhat/CentOS there is the following command:
To free pagecache, dentries and inodes:
echo 3 > /proc/sys/vm/drop_caches
However I cant find an equivalent command for Solaris. We have been using tail -f /dev/zero to run a huge process until the memory has been flushed which isn't very reliable and slow. Anyone know of a different way to do this?

If we are running multiple tests one after the other then the first test may make calls which causes information to be cached, then when the second test runs it may make use of the previously used pages in cache. This makes the second test results inconsistent as if it ran first the timing results would be different, also running through a debugger or with truss doesn't give the accuracy for timing that is required in this situation.

How to clear the Entity Cache

I have an Entity based on a GLOBAL temp table. I have a ViewObject based on the Entity. A stored procedure is called from the client that populates the GLOBAL temp table and then calls executeQuery on the ViewObject. The first time the user does this, all rows display fine. When the user changes the selection criteria and clicks a button a 2nd time, the same procedure is called which clears the GLOBAL temp table and repopulates it with the new data. An exception occurs, however, stating that there are too many rows that match the key. The problem seems to be that the Enity has cached the rows from the first execute, but those rows aren't flushed when the 2nd execute is called, which makes sense. It seems that I just need to force the Entity to clear it's cache after my procedure is called, but before the executeQuery is called. I have tried that from the client side by calling clearCache on the view AND clearEntityCache on the transaction, but they don't seem to do anything. I have also called clear cache on the app module side in the method that calls the stored procedure, but it doesn't seem to do anything either. I also turned on the JBO debugging messages and I can't see any message stating that the Entity or View cache was cleared. It appears that these calls do nothing.
Is there a way to work around this to make the Entity/View chaches completely refresh from the database?
Thanks
Erik

Typically the client layer never has access to entities. This API is the one exception. The way to keep it cleaner would be to create a custom Application Module method, and inside that perform the clear cache, rather than burdening the client to have to know about any details of underlying entity objects. Keep that hidden.
I wouldn't think you should need to clear the entity cache to do what you're doing, though. If you have a reproducible test case -- with SQL script that creates your example global tempory table -- if you could create a TAR on Metalink and ask support to file a bug for it, that would be great so we can look into it.

Clearing the Media Cache Database

Hi, In a tutorial on using Encore CS6 it says to "clear the media cache database"
Why is this done? ...and if done... does it remove any important files, clips, assets..etc that are in my other projects? Is it safe to do this?
Thanks

PPro and Encore create MANY temporary files, which may be deleted when you are done with the project... your original video clips and project files are in a location of your choosing, not in the cache folders
Some more on locations http://forums.adobe.com/thread/1007934?tstart=0
And, one way to design your project http://forums.adobe.com/thread/919388?tstart=0
I always create my project files on my 2nd hard drive (see below) so the temporary files are also put on that drive
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output if you have 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
I do not use RAID... AVCHD is CPU intensive, not drive intensive like uncompressed, so
I have no problems editing without RAID (but, this is for "simple" home videos)

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

The Problem about clearing the system cache

Hi, there!
I'm trying to draw a lot of image in iPhone programming.
I used [UIImage imageNamed].
but it doesn't clear immediately the system cache.
At last it occurs the out of memory.
So I thought using imageWithContentsOfFile, but it works very slowly.
Does anybody know how to clear the system cache?

Read Position.flx can execute much faster than 5 ms but as it reads a register that is updated every 5 ms on the board, it reads the same value multiple times.
To get around this problem there are two methods:
Buffered High-Speed-Capturing (HSC)
With buffered HSC the board stores a position value in it's onboard buffer each time a trigger occurrs on the axis' trigger input. HSC allows a trigger rate of about 2 kHz. That means, you can store a position value every 500 µs. Please refer to the HSC examples. You may have to look into the buffered breakpoint examples to learn how to use a buffer, as there doesn't seem to be a buffered HSC example available. Please note that you need an external trigger-signal (e. g. from a counter of a DAQ board). Please note that the amount of position data that you can acquire in a single shot is limited to about 16.000 values.
Buffered position measurement with additional plugin-board
If you don't have a device that allows you to generate a repetitive trigger signal as required in method 1.), you will have to use an additional board, e. g. a PCI-6601. This board provides four counter/timers. You could either use this board to generate the trigger signal or you could use it to do the position capturing itself. A PCI-6601 (or an M-Series board) provides can run a buffered position acquisition with a rate of several hundred kHz and with virtually no limitation to the amount of data to be stored. You could even route the encoder signals from your 7350 to the PCI-6601 by using an internal RTSI cable (no external wiring required).
I hope this helps,
Jochen Klier
National Instruments

Pre-fill the OLAP cache for a query on Data change event of infoprovider

Hi Gurus,
I have to pre-fill the OLAP cache for a query,which has bad performance.
I read a doc 'Periodic Jobs and Tasks in SAP BW'
which suggested sum steps to do this
i hav created the setting for Bex broadcasting for scheduling job Execution with data change in info provider
thereafter doc says "an event has to be raised in the process chain which loads the data to this InfoProvider.When the process chain executes the process u201CTrigger Event Data Change (for Broadcaster)u201D, an event is raised to inform the Broadcaster that the query can be filled in the OLAP cache."
how can this b done please provide with sum proper steps
Answers are always appreciated.
Thanks.

Hi
U need to create a process chain or use the existing process chain which you are using to load your current solution, just add event change process type in the process chian and inside it add the info provider which are going to be affected.
Once you are done with this go to the broadcaster and create new setting for that query...you will see the option for event data chainge in infoprovider just choose that and create the settings.
hope it helps

How do I clear the Disco cache on App Server 9.0.4

Can anyone tell me how I can clear the Discoverer cache installed on 9.0.4 Oracle App Server? Can it be done using App Server Control, is there command line syntax I can use?
Thanks
Andy

Hi Andy
I think the only way to get the memory back is to bounce the server. Sorry.
Best wishes
Michael

Clear the classloader cache

Hi all.
I am trying to clear the classloader cache of the jvm from out my applet.
(Basicaly like typing x on the java console when a applet runs, but automaticallt)
Can this be done ? And if , how ?
Thanks.
globe_sa

I don't think so, you'll have to write your own classloader.

Clear the weblogic cache

Hi All
Please let me know how to clear the Weblogic cache folder (ie. <bea_home>/user_projects/domains/<app_domain>/servers/
<app_name>/tmp/_WL_user) upon each restart of the server?
I am using Weblogic 9.1 and application is deployed using
exploded mode
Thanks.

We have seen that error as well. When using entity beans, we could do some creates, but then we would get the Cursor error. It would happen sporadically.
IBM now has better Type 4 drivers with version 8.2, we are having better luck with them then with the BEA drivers.

How can I clear the Safari cache without removing cookies?

Safari preferences seem to only allow you to delete all website data. Is there a way of clearing the cache but leaving cookies and browsing history?
I have Safari version 6.0.5 and OSX 10.8.4. Thanks.

Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
http://support.apple.com/kb/PH11926
Best.

Disabling the object cache for value OciObjects

Hi.
I have a program using OCIObjects as value objects to pass data from OCI to PL/SQL procedures. However in a multithreaded test there is a lot of mutex blocking occuring within the oracle client library (on OCIObjectNew, OCIObjectFree and others), which i am guessing is associated with the OciObjects being managed within the object cache.
Is it possible to disable the object cache? Or maybe construct the value objects in such a way that they are ignored by the cache.
Thanks for any help.

Hi,
thanks for your response.
I did consider using OCI_ENV_NO_MUTEX but i would like the oracle OCI library to implement mutexing because i am assuming it does it efficiently and only where required. However it is not clear to me why mutexing would be required when creating/deleting value OCIObjects. I'm guessing it's because of the object cache. (The documentation doesn't explain.)

Clearing the GR/IR - for experts !

Hello,
We have a problem in clearing the GR/IR
The scenario is this:
We entered a PO with invoice based GR and posted good receipt,
Then we changed the valuation class of the material.
In the new valuation class the GR/IR GL is different from the one poseted in the good reciept.
After changing the valuation class we posted the invoice, this created
a situation where the good receipt is on one GL and the invoice is on another.
In MR11 we cannot automatically clear these lines.
The lines are not shown.
And we cannot clear these lines manually because they are GR/IR accounts.
and we cannot cancel the invoices because they are already payed. and the posting a a few years ago...
Have you got any idea of how to get rid of those lines?
Thanks,
Shachar

Hi,
to close this issue change valuation class to earlier one and carry out transaction and after closing this matter change to new one.
in future before doing any changes in valuation class follow the following
If you want to change the valuation class, there may be because of one or more of the following already exist for the material:
1) Valuated stocks in the current period or in the previous period.
2) Open purchase orders may be there.
3) Production orders which a goods movement has already taken place.
For this first you have to do the following:
If valuated stocks already exist, you can change the valuation class only:
a) Post the stocks of the material to an interim account.
b) Change the valuation class in the material master record.
c) Post the stocks of the material back to their original account.
If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to deleted

Auto clearing the ZAA cache for bundles?

Similar Messages

Maybe you are looking for