Auto click folder that can be set chronologically

I have a book mark folder (with auto click on) in the book mark bar that has sites I like to look at on a daily basis.
I want some bookmarks to be automatic everyday and some to only come up one or two days a week - on certain days of the week.
I like to read news sites in the morning but only need to look at some specialized news sites once a week when they are published - like my university web site which is only updated once a week.
I know RSS is an option but that loads every day, not the day of week I choose.
Mac Pro Mac OS X (10.4.8)

I know this isn't quite the solution you're looking for, but one option might be to create a separate folder for each day of the week.

Similar Messages

What is the Max. Limit of ICM Script Nodes that can be set in ICM Script 8.0

I am trying to out the maximum number of Script Nodes that can be set in ICM Script editor , is there any limit on that ?
I am using ICM 8.5 Version
I have read that the value for maximum number nodes that can be executed is configurable as seen in hkey_local_machine\software\geotel\icr\\routerX\router\currentversion\configuration\script\MaxNodesExecuted
By editing the value help me to increase the No. of Script nodes in ICM Scripts ?? Appreciate your reply asap.

Hi,
Looks like the max. length described in the forms help only applied to actual database column. But if I am defining a non database column, what is the max. limit?
I tested it by setting to 32K (i.e.32767) and the form accepts and run ok. However, I am not sure whether there will be other side effect or not.
Kelly.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
Peter

When I open a new tab, I have to move to the other side of the page to click "home". Can I set the same "home" default for new tabs?

My home page opens in the initial FireFox window, but new tabs open with a blank page. To get to my default page I have to click "home", but now it's way over on the other side of the page.
Can I set a default for new tabs?

right click on the control bar and choose "adapt" (or something like that). A window will pop up. Ignore that window and move the home button to the place you want it ''on the control bar''

Example of creating ALV double click event that can be used in ANY Program

Once you get the hang of OO you can really create useful generalized code that can be used in a huge number of situtations.
Double click on ALV is often wanted
Right here goes to implement a generalized double click action that returns the row, column and column name back to the caller.
In your CLASS in the DEFINITION part code as follows.
CLASS zcl_dog DEFINITION.
PUBLIC SECTION.
METHODS:
constructor
      IMPORTING       z_object type ref to zcl_dog,
                     i_parent     type ref to cl_gui_custom_container,
PRIVATE SECTION.
on_dubbelklik FOR EVENT double_click OF cl_gui_alv_grid
      IMPORTING e_row
                e_column
                es_row_no,
dubbleklik
      IMPORTING
                 e_row type LVC_S_ROW
                 e_column   TYPE LVC_S_COL
                 es_row_no type lvc_s_ROID
                 program type sy-repid.
code here any extra any methods you need.
In the CONSTRUCTOR method of the implementation
CLASS zcl_dog IMPLEMENTATION.
METHOD constructor.
   CREATE OBJECT grid_container1
       EXPORTING
               container_name = 'CCONTAINER1'.
    CREATE OBJECT grid1
        EXPORTING
              i_parent = grid_container1.
    SET HANDLER z_object->on_user_command for grid1.
    SET HANDLER z_object->on_toolbar for grid1.
    SET HANDLER Z_OBJECT->handle_data_changed_finished FOR grid1.
    SET HANDLER Z_OBJECT->on_dubbelklik FOR grid1.
endmethod.
METHOD on_dubbelklik.
CALL METHOD me->dubbleklik
exporting
                 e_row = e_row
                 e_column = e_column
                 es_row_no = es_row_no
                 program = sy-repid.
break-point 1.
method dubbleklik.
perform dubbleklik IN PROGRAM (program)
    using
    e_row
    e_column
    es_row_no.
ENDMETHOD.
endclass.
This will now perform a routine called dubbleklik in your application program whenever you double click a cell in the grid.
In the application program just code the following
DATA: z_object type ref to zcl_dog, "Instantiate our class
       grid_container1 type ref to cl_gui_custom_container,
CREATE OBJECT z_object EXPORTING z_object = z_object.
call ANY method in the class which eventually displays the grid
CALL METHOD z_object->build_dynamic_structures
        CHANGING it_fldcat = it_fldcat.
form dubbleklik using
        e_row   type LVC_S_ROW
        e_column type LVC_S_col
        es_row_no type lvc_s_roid.
break-point 1.
endform.
When you double click a cell you'should be at the break point in your routine in the application program.
You've got the cell that was clicked so by reading your table you can examine the data and take the appropriate action.
Cheers
Jimbo

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728
If this is a bug you'll get a refund, if not post your enhancement request in the Idea Place. Or the Rep will suggest a better way to create your report.

TS3276 the images (attachments) are automatically resized (smaller) when I send them to a customer. My email screen does not show a drop down menu box where you can leave as actual size. Is there a setting elsewhere that can be set.

Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem. I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
Thanks

What email program are you using? And what do you mean by "Safari mail"?

Folder that can't be used on Time Capsule

I created a folder on my time capsule that makes all icons disappear when I save to it. I can't delete the folder because it says that the folder is in use. I've created other folders on the TC and don't have any problem with them. How do I get rid of the folder or make it able to save files?

DId you create the folder inside the sparsebundle??
If so just leave it alone.. I think you will mess up the backups if you play with it.. I don't understand why but you can create stuff inside the sparsebundle used by TM but cannot easily delete it.
No doubt you can do it from terminal commands with root privileges but that is beyond me.
See pondini how to delete stuff.
http://pondini.org/TM/E6.html

Setting port exceptions for Windows Firewall via GPO. Is there a limit on the number of exceptions that can be set?

We would like to utilize GPOs to manage our Windows Firewall rule set. We have servers that have different requirements (HL7 connections, other programs) and our doctrine is to only open ports that are going to be used.
We need to be able to audit and enforce these standards, so GPOs seem to make the most sense to me.
The problem I am running into is when I attempt to define multiple Windows Firewall Inbound Port Exceptions. (More than 10) After "Applying and Okaying" I will go to verify the firewall rule-set but I find that quite a few of them are missing. It
seems like I am limited to 8-9 port exceptions per GPO.
I am unable to locate any documentation about this, but we can work around this by creating multiple GPOs.
Has anyone run into this issue before?
Domain Function level: Windows Server 2008
Tho H. Le

> Has anyone run into this issue before?
No, unfortunately. Our main server FW exception GPO contains 44 rules
with port or program exceptions, and it works flawlessly...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Can we set User roles/permissions for a content that is stored in Contentspace at the end of Process

Friends,
I have a requirment where a set of approvers approve a form and at the end of the process i store the form as a pdf in the contentspace.
My requirment is that, can we set roles/permission for the file that i store in the contentspace and allow only the people who have approved the form to view/edit the content the the contentspace.
If possible what is the workbench activity should i use and how should i use it in the process?
Thanks for your support
-Ashok Deivasigamani

There is a read/write permissions service in the Content Services category in workbench that will allow you to control the access to the space or th efile that you write intp CS.
Paul

How to I make a "Package" folder that contains my app?

I am not a developer, but I'm hoping someone here will know how to do what I'm asking.
I am creating a VERY simple Filemaker runtime app. It consists of an .app file (which is a package), some extensions, a .usr file, and an aknowledgements PDF.
I'd like to place all of these files in a folder and then have that folder be the new package, so that when the user double-clicks it, it launches the app.
How to I make a folder launch an app when it is double-clicked?
Thanks

I think I misunderstood, or I didn't ask the correct question.
I was not looking for a way to build an installer (although that was helpful!), I was actually looking for a way to make the enclosing folder for my app double-clickable to launch the app.
My app consists of a bunch of files that are all in a folder. That is messy - I'd like for just one icon for my app to live in the /Applications folder. Can I set up the app's enclosing folder so that when the user double-clicks it, it opens the app? (Is this done with folder actions?) This would essentially make the solitary apps folder indistinguishable from the actual app to the user, and it woulc look a lot cleaner than having a bunch of files.
Most apps can be right-clicked to "show package contents". Isn't that essentially just an enclosing folder with a folder script that contains the app and its files?
I hope I'm making sense here.

Where is the bookmark 'auto-click' column?

Can anyone tell me how to make the auto-click column appear in the bookmark window of Safari?
Thanks.

Yes, the column is "Auto-Click" not Auto-Tab". I bet you only see it available for folders on your Bookmarks Bar with a check-box appearing only besides the folders on the Bookmarks Bar.
Note that without Auto-Click enabled, you can automatically open all tabs by Command-Clicking on a folder on the Bookmarks Bar. With Auto-Click enabled, the operation is reversed and Command-Clicking will give you a drop-down list of the folder's contents.

How can I set a polygon's path by using the .add() function?

I have been searching the web and this forum and doing plenty of experimenting, and I can't for the life of me figure out how to do this.
I can set other attributes of a polygon inside the add() parentheses, such as the fillColor, but I can't set the polygon's path's pathPoints unless I use a separate line of code after the add(); line.
My script adds a great deal of polygons in a row, so halving the number of operations would greatly help me, and also it seems that some properties such as appliedObjectStyle cannot be set until after a polygon's path is defined. That means I need a third line of code after add() and entirePath=, which slows me down even more.
Help?

Ryan, I think you need to reset and take a moment to understand what it is that is going on here.
The things you've proposed that don't work shouldn't work, and it's all quite simple.
Generally speaking, a .add() function takes an additional parameter, a JavaScript Object, that list properties of the created object that can be set.
A JavaScript Object is a list of key/value pairs, just like an associative array in a language like perl, or a dictionary in a language like Python. It is expressed in curly braces as such:
{ key1: value1, key2: value2, key3: value3}
So, for any such general add function, these
foo = whatever.add();
foo.bar = baz;
are equivalent to this:
foo = whatever.add({bar: baz});
Are you with me? So, for instance, you had originally asked why you could not use pathPoints in polygons.add() and the answer is simpe. You cannot set polygon.pathPoints, because there is no .pathPoints property of a polygon.
So, when you want to try add properties inside properties, you must do as as objects within objects, and follow the strict hierarchy. Marc advises that this works:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings: {dropShadowSettings: {angle:120}}
and if indeed that is so, then the extension for setting multiple transparencySettings should be clear. It is not this, that you propose:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings: {dropShadowSettings: {angle:120}}
    transparencySettings: {dropShadowSettings: {distance:1}}
Because to do so is to set the transparencySettings key twice in the same Object. And to do that is to replace the first with the second. The above (yours) is wholly equavelent to:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings: {dropShadowSettings: {distance:1}}
If you wish to set more than one attribute of dropShadowSettings, you must set transparencySettings to an object containing one and only one dropShadowSettings, and you must do it only once. So it is this:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings:
      {dropShadowSettings: {angle:120, distance: 1}}
I am not sure why you thought you should have the name of the key in the Object named properties. That is probably because in some cases you can use:
foo.properties = { a: 1, b: 2};
as a shorthand for
foo.a=1;
foo.b=2;
but you would [probably] never want to mix that with the object notation for setting multiple properties in the .add() function.
Does this help to clarify?
As for your last question:
Also, it doesn't let me use square brackets or parentheses inside the add() parentheses, so the original problem I posted (trying to set a polygon's path) is still a problem.
It's not about the use of brackets or parentheses, but what they mean and where they go. As you have not posted an example of setting the polygon's path the long way, it's hard to show you how to shorten it. Post what you have that works, and we will show you how to shorten it. (I suppose some with more patience than I are willing to go look up what we think it is you are trying to do, and then interpret it. But I would much rather you show me the code you have that works, and then your attempts to transform or shorten it and change its notation. This makes it much much easier to help you, and it should also make the help more effective, by contextualizing it. As an added benefit, when someone else reads your post and tries to learn from it, they will gain more.)
So again, please provide a clear example of the "long way" to do the thing you are attempting, and then your attempt at shortening it.

Can you set Reader X's default Print orientation?

Hello -
We have a myriad of web docs provided in PDF form. These are launched in a browser window using IE9 or 10. These are various and sundry parts inventory lists and we are constantly calling them up to print, then dismising them until the next context based request. IOW, the parts lists are not static, otherwise I'd tell everyone to just keep the one they get up on the screen. They are produced by our corp HQ so we have no control over how they are authored.
When these docs appear in the browser window, they are in landscape mode (or at least appear to the eye to be). When we print however they're printing in portrait mode -UNLESS- you remember to select landscape in the print dialog window before you hit <OK>. So, why don't we just remember to do that? We're humans, I guess. And the other thing is the authoring office completely disables all Reader menus, toolbars and other screen elements. You do get a small bar area near the bottom with controls to zoom in/out and print, etc. So I was trying to attack this by calling up Reader at the workstation level to see if I could adjust.
I've looked extensively through Reader's excellent menu system trying to find a way to set Reader to always print landscape. Of course, I can't find it. Then it occurred to me that perhaps this is not a Reader issue and perhaps is a printer driver issue. However, if we default the printer driver to landscape then we're facing the same problem with other applications that require printing like MS Word and so forth. So that's not a real good option.
So, let me ask then if Reader does or does not have a default setting that can be set and that can persist session to session? Even if I did this once a day, it would be better than having to hear the 'Gosh darn it' arias all throughout the day! How about a launch script or launch switch? Anyone know of one?
Thanks, all.
H

Document Properties > Advanced > Page Scaling = None.

Can be set with one click that all senders are approved?

Can be set with one click that all senders are approved?
Example: folder inside POP3/IMAP have many folders. Can be approved email sender's or each sender needs to be added into UNwanted list?

Hi,
I'm not sure if I understand the request clearly, it seems you want to find an easy way to set all the mail senders in a folder as blocked senders or safe senders, correct?
I'm not sure which version of Outlook you are using, for Outlook 2013, there's no such quick method to do that by one click, you will need to use the Junk E-mail Options to add the senders to the Safe Senders or Blocked Senders list.
You can learn more information from Use Junk Email Filters to control which messages you see:
http://office.microsoft.com/en-us/outlook-help/use-junk-email-filters-to-control-which-messages-you-see-HA102749438.aspx
From the link above, please note if you have existing lists of safe names and addresses, you can move that information into Outlook. Click
Import from File and browse for the list file that you want. To create a file that uses your current list, click
Export to File and then specify where you want the new file saved.
Regards,
Melon Chen
TechNet Community Support

How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

Yes, try to restore your iPhone from iTunes or iCloud backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Tell us the result if you will try.
<Link Edited By Host>

Auto click folder that can be set chronologically

Similar Messages

Maybe you are looking for