Auto close after playing a trailer?

The title says my question: Can I set Quicktime to close automaticallyl after a trailer plays? I don't see a setting for that, so I presume not.

The QuickTime Player isn't open when you view most movies embedded in a Web page. Only the browser plug-in is in use.
If the page code is set to "target" the QuickTime Player then the file will open in QT. It is up to the authors to decide what the file does when the movie is finished.
QuickTime Pro can set some "Presentation" features that include auto close and auto quit. These properties travel with the file.
I set some of my Presentation movies to auto quit the player when the file is finished.
Doesn't Control-Q quit the open app?

Similar Messages

  • Photoshop cc auto-close after opening.

    I am new here with adobe cc 2014. i have tried using my photoshop once but after that i can't use it because it auto-closes after loading the program. I don't know how to fix this problem. Can anyone help me with this?

    Good day!
    Please read these and proceed accordingly (restoring Preferences might be of special interest):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    http://forums.adobe.com/docs/DOC-2325
    Regards,
    Pfaffenbichler

  • Auto-Save &Auto-Close after inactivity

    I'm new to JavaScript, so please be patient. I am using Acrobat XI
    I have a document that I am trying to have auto-save and auto-close after 10 minutes of inactivity. I've found where I would enter the JavaScript under the document actions, and I see the "Will Save" and "Will Close" functions, but I guess I don't understand what JavaScript I need to put in these fields to get them to do what I want.
    I can get the document to run JavaScript that will close the document after being open for 10 minutes, but I need it to save and close after 10 minutes of inactivity. Is this possible, and if so how do I go about this?
    Thanks SO MUCH in advance.

    The "Will Save" and "Will Close" events are only triggered after an action to save the PDF or close the PDF has started.

  • Reader 11.0.0.3 auto closes after an install

    I downloaded Reader 11.0.0.3
    When I open it prompts me to accept the license
    The license window stays up bu the application closes within a second.
    Opening any pdf file post that point allows the application to open... then auto closes after 1 sec
    I have installed with Chrome, without Chrome
    I have rebooted between installs
    Google search led me to Eula.exe - which is the accept license
    That has no affect
    I am running Windows 7 64 bit on a Lenovo laptop

    Two more things things to try...
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Adobe Reader no longer Auto-Closes after printing

    My company uses software that allows for users to reprint invoices they have previously made.  The way the procedure is supposed to work is: the driver clicks a re-print button, Adobe Reader opens up with the document, prints it, then closes.  Within the past couple of weeks however, everything is fine however Adobe Reader will not close out.  The PDF document itself closes, but the user is then brought to the main menu where they can open up another PDF.  The problem this is causing is that they cannot reprint other invoices until manually closing out of Adobe reader every time.  There have not been any updates made to the software they are using, or to Adobe Reader.  We have users on both Windows XP and 7, and have the issue with both Reader v10 and 11.
    Any suggestions on how I might be able to get Adobe Reader to auto-close again?  I am also checking with the software vendor for their insight.

    Might be difficult to fix.
    You don't know what changes to your system/registry have been made by the virus infection you told of.
    Maybe this article has some useful hints for you.
    http://blogs.adobe.com/dmcmahon/2009/04/12/acrobatreader-acrobat-fail-to-load-its-core-dll -error-after-installation/

  • Auto-close after signature?

    I would like to know if it's possible to auto-close a document after signing and saving.  I've been having an issue at the company with two (or more) people having a document open for electronic signature at once, and of course only one of them can save at a time.  If a document could close automatically after signature, this problem would greatly be reduced.
    If there is a code that allows auto-closing the file after the signature save prompt and the person signs, I would love to know about it.
    Is this possible?
    Win XP, LS 8.2, Acrobat Professional 9.4

    Ok tried that, and get the message, "Object contains a feature not supported by target version"
    The Report log says,  "Target Version does not support PostSign event".

  • Reader XI auto closes after 4 seconds. Won't view PDFs.

    I had Reader X but was having problems with using the sign function. I went to check for an update and downloaded XI. When I tried using it, it opened a window for about 5 seconds (promising) and then automatically closed. When I tried uninstalling, a window said that the administrator had blocked the program from being removed.
    I tried a System Restore on my computer, attempting to fix X, but that didn't work. When I try downloading anything less than XI, it says I have a more updated function version on my computer. It says the same thing when I try reinstalling XI or fixing XI. It still auto crashed after 4-5 seconds.

    Reader is actually covered in a separate forum (this is the Acrobat forum). Some of the issues are similar. Typically you need to be logged in as the administrator (at least with admin priv.) and have anti-virus disabled for the install. To try to go back, run http://labs.adobe.com/downloads/acrobatcleaner.html, delete the Acrobat or Reader (in your case) folder, and reboot. Hopefully the install will go smoothly after the reboot. Again, be sure to be logged in as an administrator and have anti-virus disabled. Fixes can be done from the control panel>Programs & Preferences.

  • PR Auto close after PO

    Dear All.
                       Any standard configuration is there to close PR after PO creation.
    if available please provide the config steps
    Regards
    Kumar.

    hi
    IF Full PR Qty is used and u want to restrict further document creation set 06 076 messag eas error message in customization
    SPRO>Materials Management>Purchasing>Environment Data>Define Attributes of System Messages-->System messages
    u can set PR closed manualy or by running ME5A report
    Vishal...

  • Application auto close after some time

    I'm facing this really annoying problem in my nokia500 belle.. And interestingly it happens with only one application, ucweb (version 8.4) ... This usually happens especially when I'm surfing the sites and downloading some content as well...this is really really very annoying.. I at times lose so much of my downloaded content like movies... Despite the fact that the task going on was pause and resume supported, the browser would all of a sudden stop responding and a pop up window comes declaring the error in downloading and before i even react the browser closes automatically... And I lose all the data of downloaded (in the current task)... Help me someone..

    Have you tried using opera mini?
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Photoshop is unable to Register/ Auto-Closes upon opening

    Alright,
    I've seen at least one other user with this problem, and it's nothing that can be resolved by signing in and out of the Adobe CC application, or even the Ctrl+Shift+Alt and opening trick.
    So recently I went with the $9.99 a month package for Adobe Creative Cloud containing Photoshop and Lightroom.
    No matter what I try, it won't ever prompt me to input a serial to register Photoshop, therefore any attempts at opening it set off it's anti-piracy measures and make it force-close immediately after opening/ after it finishes loading.
    When I am able to try and register/ finalize registration, it wants me to "complete registration by updating your account information," yet the page continuously loops and clicking "Update and Continue" brings me back to the same page. Which disallows me to register Photoshop.
    This is the reason why I, and possibly others, are unable to use Photoshop, for it auto-closes after fully loading, since it cannot be registered the same way Lightroom is.
    (Lightroom is registered immediately via a prompt message upon first startup asking for a serial code, one of which that is alread inserted/ auto-inserted by the Adobe Creative Cloud application.)
    Upon further investigation to prove my point, on my account the only product registered is Lightroom.
    Picture: http://screencast.com/t/0PTyKbUVLA
    I've tried the customer support chat.
    Multiple times.
    Possibly upwards of 16. Each time the representative went down the same list and copy/ pasted the same answers.
    It's sad that I was the one to narrow it down and have the problem figured out.
    Apparently I have to wait to contact their special support team on Monday to get this resolved.
    Although, it appears the package is "Photoshop Photography Program (For CS3+ customers)," which is not the version listed and advertised all over the site.
    (This package would indicate that I would not be able to use Photoshop since I have not owned Photoshop prior to purchasing this package.)
    Yet the only package that this applies to is this one:
    http://screencast.com/t/pDylveniasI
    This is insanely annoying.
    I would much rather do support via email, and I would also much rather have a more clear product description if the one I selected turned out to have been falsly advertised.
    Message was slightly edited by: MrNameloc

    I was on their Chat Support yesterday for 6 hours. Possibly a bit longer.
    Anyways, after waiting 4 hours for the Technician, the technician walked me through uninstalling Adobe CC and re-installing, but before he had me 'trash' the old preferences.
    Below is the file path (highlighted in blue, obviously), and the items that were changed.
    opm.db was deleted after changing the OOBE folder by adding the '.old' to it. (In the picture you can see the new versus the old...)
    Then afterwards they had me to make sure Adobe CC would not run, then had me to un-install it and re-install. Then had me to un-install Photoshop and re-install.
    (Well, they had me to un-install Photoshop CC, delete Adobe CC's preferences, un-install Adobe CC, re-install Adobe CC, then re-install Photoshop.)
    http://screencast.com/t/hjaPTVD2wl
    Did not work for me. You/ anyone else could try and save yourself 6+ hours in their support chat.
    They even assured me that, on their end, Photoshop had been registered on two machines already under my account; Meanwhile everytime I view my Adobe Products and Services, it still only lists Lightroom.
    Trying to convince them that it's registration is pretty hard. I've seen people with cracks of Photoshop CC, didn't work because Adobe CC keeps re-installing itself if it isn't allowed to be connected to the internet. (They were having the same problem as us; Opening Photoshop had it auto-close, and since Adobe CC cloned itself the anti-piracy measures kicked in causing Photoshop to do this.) However, since the cracks only install the trial version, it's still functional for 30 days. Therefore if you're able to find a trial version of Photoshop, or maybe even get a pirated copy, you'll be prompted to put in a Serial; Then possibly ask Adobe for your Serial, register and activate Photoshop, and maybe it'll work.
    Only reason why I suggest a cracked copy is because you are able to actually download the trial without signing into Adobe CC.
    Plus, it will actually give you a prompt to input a serial key. Unlike the Adobe CC installer.

  • How do i turn off the auto delete when played feature in new update?

    how do I turn off the auto delete after playing an item in latest update?

    After the disaster of iTunes 11.1 that deleted nearly all my archived podcasts (recovered from backup thankfullly) I was shocked, but not altogether surprised, to see that the option to delete played episodes has been enabled/re-enabled by default.
    From the lower right of the Podcasts window click Settings then, if needed, click Defaults, then turn Delete Played Episodes to Off.
    Why set the destructive option as the default?
    I have many episodes that I want to keep that are no longer available at their feed so the last thing I want is any automatic delete process to be enabled.
    tt2

  • Auto close opened excel files

    Hello Guys,
    We need help with excel. There are many users who forgot to close excel and open files and when someone else tries to open file he gets error message. Is there a way to configure so that excel shows who is user and if i can configure auto close after example
    5 min.
    Thank you in advance

    Hello Guys,
    We need help with excel. There are many users who forgot to close excel and open files and when someone else tries to open file he gets error message. Is there a way to configure so that excel shows who is user and if i can configure auto close after example
    5 min.
    Thank you in advance
    The following Sub goes into the Workbook
    Private Sub Workbook_Open()
    EndTime = Now + TimeValue("00:05:00")
    RunTime
    End Sub
    This one goes in a separate module:
    Public EndTime
    Sub RunTime()
    Application.OnTime _
    EarliestTime:=EndTime, _
    Procedure:="CloseWB", _
    Schedule:=True
    End Sub
    Sub CloseWB()
    Application.DisplayAlerts = False
    With ThisWorkbook
    .Saved = True
    .Close
    End With
    End Sub
    The next one should go in each sheet you have in the WB
    Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    If EndTime Then
    Application.OnTime _
    EarliestTime:=EndTime, _
    Procedure:="CloseWB", _
    Schedule:=False
    EndTime = Empty
    End If
    EndTime = Now + TimeValue("00:05:00")
    RunTime
    End Sub

  • Auto close of video floating frame after play is complete

    I'm using pdf floating frames for video play to allow easier viewing. How do I make the floating frame close after the video play is complete.

    Delon,
    > Frame 1 = Dynamic still photo
    > Frame 2 = dynamic flv with small video
    The syntax you use depends on how you're displaying that
    video. If
    you're using the FLVPlayback component, for example, you'll
    have to consult
    the FLVPlayback class in the help docs. If you're using a
    Video object
    (which collaborates with the NetConnection and NetStream
    classes), you'll
    have to consult the NetStream class.
    In either case, you'll want to write an event handler
    triggered by the
    completion of your video, and that event handler should send
    the playhead
    back to frame one with gotoAndStop().
    Here's a quick blog entry with suggested solutions for a
    number of ways
    to play video in Flash:
    http://www.quip.net/blog/2007/flash/actionscript-20/how-to-determine-completion-of-flv
    David Stiller
    Co-author, Foundation Flash CS3 for Designers
    http://tinyurl.com/2k29mj
    "Luck is the residue of good design."

  • Pinwheel when trying to close safari/firefox after playing video

    i've only noticed this on the nytimes.com website after playing their video content (youtube works fine). in both firefox and safari: every single time i play a video, if i pause it or stop it and then try to close the tab it is in or the application, i get the pinwheel and no matter how long i wait for it, it does not come back so i force quit. i've tried updating/reinstalling, but nothing seems to work. also episodes/shows via abc.com do not play at all - tried reinstalling/updating those plugins/apps as well. this is happening on both macbook pro and macbook with updated versions of leopard... thoughts?

    This seemed to come out of the blue, very much as described by anima42. I also am a Ubuntu 10.04 user. I have pondered on the first reply above, and though I don't, and didn't, use Tabberwocky, I was using Tab Mix Plus. Having removed this, the problem seems to have gone away. Another possible clue as to what went wrong: I use a constant Firefox profile located in my home directory. I dabbled with Ubuntu 11.04 a week or so ago, which runs (I think) a more updated Firefox. This Firefox was operating on my default profile, as you would. It may have broken something so it now doesn't play nicely with the 10.04 setup. Just surmising.

  • Q10 search remains on a contact after search and call - any way to auto close?

    Hi,
    I'm just starting to try out a q10 for work purposes and one issue I ran into several times today...
    After typing in a contact name (to search) and then selecting call or email, making call or writing email and the turning screen off:
    The next time I turn the phone on to search for anything, the contact I had searched before appears. Usually after a few button presses I realize it and by then I'm stuck in editing that contact.
    Is there a way to have the search close after the call/email ?
    Or maybe have it reset after a while ?
    Or, even better would be a gesture I can use from when the screen is off to activate screen and start a new ?
    On that last point, depending on the state that I left the phone in it seems I must to do different things to perform a new contact search...
    For example search is showing a contact already and I'm not on the search screen:
      Swipe up or power button to activate Press a key to start a search Swipe left to leave the contact that was displayed by search
      If search is not showing a contact then I just swipe up and type a name
    Also, different topic but I am really hoping there is a simple solution here:  is there a rapid way to jump straight into the hub?  
    Sometimes I need to swipe up to turn on, swipe up to exit an app the swipe right swipe right and swipe right to get into the hub.  It feels kind of disorienting since it's not always the same procedure and I'd like these things to be "muscle memory."  
    Thanks, 
    Dave

    after youve called the contact and it opens with their name again just tap cancel on top right of screen and it puts you back to the first person in your contacts list.
    its the only way ive found out how to close the cotacts name.

Maybe you are looking for