Auto components list in PM orders?

Dear experts,
I'd like to have the components list automatically populated based on the equipment type I referred on the PM order?
How can it be done?
Thank you in advance~

I used maintenance BOM.

Similar Messages

  • Reg. Component list of planned order

    Hi All,
    My requirement is i need a simple components list of planned order similar to COOIS - Component list, but not with all information.
    Only I need the list of components planned order wise with component number, quantity, Sloc, Header material number, Production line and Production start and end dates.
    To achieve this I am going for Z report development, I found the BAPI-BAPI_PLANNEDORDER_GET_DETAIL has all information what I need.My question is does this BAPI is fetching the values of component from the reservation table against that planned order number.Meaning does this BAPI output of Components and RESB output for that planned order will be same?
    Regards,
    MBN.

    Hi
    Yes both results are the same if you check the RESB table with reference to the planned order number for which you have fetched data from BAPI BAPI_PLANNEDORDER_GET_DETAIL, both are the quantities are same, Also you can see the same in MD12/MD13, but when you check the RESB table only input as one of the component assigned in Planned order , then the quantities will differ,
    The result will be the same only in case when you execute the data from table RESB with respect to the planned order number( given input in BAPI).
    Regards,
    Anupam Sharma

  • Reversal of components issued to Production order

    Hi Gurus
    I have a problem during reversal of components issued to production order.
    i issued 100 nos of components to production order thro co27.
    When i do reverse 50 components thro MB1A (262 movement type)
    the system is not reducing the reversed components qty. in the production order components overview ( Qty withdrawn).
    One more issue is,
    When i create rework order thro' co07, i have selected the ref. opn set what i have created. Then i entered the settlement rule against production order.
    After that system giving error message "No task list for selection ID 01 for auto task list selection found.
    With out considering this message, i did confirmation, i am not getting the  rework order material in the stock ( control key with auto GR).
    Please advice me.
    Thanks & Regards
    Bala

    Bala,
    In transaction MB1A, use the following procedure.
    1. Execute transaction MB1A.
    2. In the Intial screen enter movement type as 262, Plant details and storage location details and then click "To order" button or Shift+F1).
    3. In the Popup screen enter the order number against which the reversal has to be performed and Enter in keyboard.
    4. System default proposes all the components which were Issued, enter the quantity for the material you wanted to reverse, remaining materials leave the quantity blank.
    5. Adopt and Post the Goods movement.
    This would now reduce the Goods withdraw quantity.
    Probabaly previously you were trying to enter the Order number in the second screen, what this means is that the system would consider this as "Unplanned Goods Movement", hence this movement does not gets updated with referance to reservation.
    Hope this resolves your problem.
    For your rework related query, request you to open a new thread if it is not answered here.
    Regards,
    Prasobh

  • Auto closing of open Purchase Orders

    hai all
    My requirement is to find all the Auto closing of open Purchase Orders which donu2019t have any more use in business transaction
    using BAPI.pls send me one sample report
    regards
    Asish.

    Hi Lebogang
    Go to the open items list under sales or purchasing reports, select PO's on the top right and then highlight all the PO's you want to close. Then right click on the grey area on top of the report and select close. This will close all at once.
    Kind regards
    Peter Juby

  • Sort my bookmarks in drop down lists in alphabetical order not just in Library Views

    When I click on Bookmarks then select a folder to view its contents, I want to see those contents in alphabetical order By Name, not in the hpahazard order in which they were added. I know I can View them in the Library List in alphabetical order or change that to something else. But I want tp make the drop down list and the folder contents to be in alphabetical order all the time.

    The Views menu in the Bookmarks Manager (Bookmarks > Show All Bookmarks) is for viewing the bookmarks in a different sorting order (hence the name Views) and doesn't sort bookmarks permanently.<br />
    Clicking the column header does the same sorting for viewing purposes only.<br />
    If you want to sort bookmarks then you need to right-click a folder and use "Sort By Name" to sort that folder.
    *Auto-Sort Bookmarks: https://addons.mozilla.org/firefox/addon/auto-sort-bookmarks/

  • A Query for shortfall quantitiy of components in a Planned Order

    Hello,
    I'm trying to create a query to report committed quantity, required quantity and shortfall quantity of components for a planned order related to a WBS.
    When I run MDVP for a specific planned order I see values in FLMNG field.
    But when I check the reservation of that planned order in RESB table FLMNG table is empty while other fields for required quantity and committed quantity are filled.
    So I ran ST05 for MDVP and figured out that system is using a table called RESVDB( I cannot remember the exact table name) but result the is same.
    Does system fill the FLMNG field only in the structure of MDVP with substraction of committed and required quantities and never updates it in reservation tables? If it does update tables where can I find this field?
    And also, to get the same result with MDVP, is using these fields in RESVDB the right way?
    Thanks,
    Arda

    Hello Arda
    The system design is explained on the following note:
    423538 - MDVP: Missing part list in collective availability check
    The following information is provided on this note:
    For dependent requirements of a planned order, the system generally updates no
    missing part indicators using the availability check in the corresponding
    dependent requirements record of table RESB. SAP does not plan to implement
    changes in the system design of the R/3 standard system that allow processing
    the missing part indicator from the availability check.
    BR
    Caetano

  • FYI: Confirmed flaw with Outlook Auto-Complete lists w/Exchange Online

    Ever since our organization migrated to Exchange Online we noticed a flaw with how Outlook's Auto Complete list (nickname cache) operates.  We've finally gotten a confirmation from Microsoft that the following is indeed a problem:
    Each entry in a user's local Outlook auto-complete cache is represented by an LDAP distinguished name.
    When Exchange is hosted on-premises these entries pretty much never change.
    When your organization is hosted on Exchange Online, the distinguished names for your mailboxes can change without notice due to maintenance processes (Microsoft's engineers have confirmed this to be true).
    There are other ways that a mailbox's distinguished name can change (re-creating a mailbox, etc.)
    Outlook's local auto-complete cache has no way (currently) to reconcile changes should any of its entries' distinguished names change in the cloud.
    When the entries in the local auto-complete cache become "stale" the following may happen:
    Emails to affected recipients can bounce back.
    Emails to distribution groups containing members which have stale auto-complete entries can bounce back.
    On occasion no NDR is even generated (BIG PROBLEM).
    As noted above, we've gotten Microsoft to admit that this is indeed a problem with Outlook when combined with Exchange Online. I was told that the Outlook product team has been notified of this problem.  However, in order to escalate this issue I was
    asked to spread the word to other customers so they can also chime in if they've been affected.
    Please supply your feedback to Microsoft and ask that Outlook be enhanced to either reconcile the local auto-complete list with the online GAL, or provide some sort of notification to the user that an auto-complete entry has become "stale" or invalid.
    Thanks for everyone's time!

    Hi,
    There is nothing called as Outlook's local nick-name cache. This resides on the mailbox and not outlook and supports only 1000 entries only. If the entries exceeds 1000 it will not function correctly.
    After the .nk2 file has been imported into your mailbox, Outlook writes a value into a hidden message in your mailbox.
    To locate this property in MFCMAPI, open the
    Associated Contents table of the Contacts folder. Then, select the message with
    Subject = IPM.Configuration.ContactPrefs.
    Then, double-click the PR_ROAMING_DICTIONARY property to see the configuration setting nickname cache import. The value to examine is
    pImportedContactNickNames (True = the import has already occurred).
    Since you are facing issues at this point of time, it needs to be corrected. I would appreciate if you can open phone support case with O 365 team and ask them to escalate to Exchange Level , we should be able to work with
    you and correct the issue
    Hope this helps
    Thanks

  • Serial number of components issued to production order

    Hi Guys,
    I want to get a report for components issued to production orders with Serial numbers. Is there any report available.
    thanks and regards
    Murugesan

    Hai Murugesan,
    Try MCRE or MCRX here you can get the materials list which you have issued to production order. Other wise goto MB51 mov.type 261. and execute here also you can get the details.
    Reg/ Shankar G.

  • Deleting the reservations for components of a production order without TECO

    Dear Gurus,
    I forgot to activate the backflush indicator in the beginning. I activated the backflush indicator in between. But for the confirmations already made I had to issue the material as unplanned consumption for the order. This is not clearing the reservations for the material.
    How to delete the reservations for components of a production order without TECOing the production order? My order is not completed.
    Thanks and Regards,
    Raghu

    Hi Kumar,
    I have a production order for 1000 header (A) qty. My control key is PP03 (auto goods receipt from confirmation in CO11N).
    For this order the component B qty is 1000 (BOM consumption is 1:1)
    Without doing GI, the confirmation is done for 300 A qty. I realized that auto GI is not done for the 300 qty of component B as there was no backflush indicator.
    Now the backflush indicator is activated in the production order for component B.
    In the next confirmation for another 300 A qty, automatic GI is posted for 300 B qty because of backflush now.
    Now my confirmed and GR qty for A in two rounds is 300 + 300 = 600.
    GI of component B done is only 300 (through backflush).
    Qty yet to confirm = 400.
    So I did GI of 300 B qty through MB1A (which is an unplanned issue). This does not update the withdrawn qty in the production order. Also the reservations for component B for this 300 qty are not reduced in the system.
    Now the reservations against the order for component B = 1000 - 300 = 700 (which is 300 more than the qty yet to confirm).
    Now when I run MRP for another 2000 qty of A, the procurement proposals for B will be 2000 + 300(undeleted reservations) = 2300. Though the system is behaving properly, this 300 is additional and unwanted.
    For this reason I need to delete these reservations before the MRP run. As order is still open, I cannot TECO the order. Nor can I clear all open reservations from CO11N.
    Thanks and Regards,

  • Deletion of components in the production order

    Dear all,
    Our client would like to delete few components issued to production orders by mistake.(these are bulk materials, transferred from legacy system).
    These materials are issued to orders already.
    The production orders are already confirmed .
    Is there any way to delete these items from the production order?.
    regards,
    Kumar.

    You can directly delete the component bulk material in  Co02 itself in the componet tab.
    Do the where used list in CS15, ANd check whether that BOM material have production order in COOIS, and go to change mode of  the order and delete the component manually.
    It is very difficult to delete the component through LSMW, reason is the line item component, for one order it may in line item 10, for  other order it may be in  line item 40.

  • How to find out the list of Production orders created for sales orders

    Dear All,
    Our company wants to generate a report for a List of Materials sold out in a particular Product Hierarchy. Along with that we want to know the list of Production orders created for the sales orders.
    How to identify the production orders which are created based on Sales orders.
    Kindly suggest.
    Regards,
    Mullairaja

    Check these threads
    [Sale Order & Production Order|Sale Order & Production Order;
    [Re: Linking Production Order against a Sale Order MRP run|Linking Production Order against a Sale Order MRP run;
    thanks
    G. Lakshmipathi

  • Report for List of Transfer orders in warehouse management

    hi,
    i want generate a report for list of transfer order orders in warehouse management
    is there any report with you guys kindly help me,
    or any standard report is there to display list of transfer orders in warehouse management
    Thanks,
    Rajesh
    Edited by: rajesh kumar kandagatla on Feb 11, 2009 9:27 PM

    Hi,
    If it is one time requirement, you can run the report LT23 and download the data to excel sheet and donwload material details in another sheet and you can match the temperature column in excel file.
    If it is permanent requirement, create a query and attach transaction code to that or write a seperate report for this requirement.
    Please let me know.
    Thanks
    Nagarajan

  • Standard T Code to release list of sales orders in 'Delivery Block'

    Dear All,
    Is there any standard transaction code in SAP which provides the facility to release list of sales orders in 'Delivery Block'. (Additional information - List of sales orders in 'Delivery block' is available in V.14,however it does not have release facility).
    For example, VKM3 gives the list of sales orders in 'Credit block' with release facility.On the same lines, is there any standard T code or any other facility in standard SAP which provides the facility to release list of sales orders in 'Delivery Block'.
    Thanks and Regards,
    Zahid

    As already suggested, if you execute VA14L you can see all sale orders that are blocked at
    -  header level
    -  item level
    -  credit check
    Wherever you see "X" under the tab Header level, double click on the respective sale order, so that system will take you to sale order in change mode.  You can remove the header level delivery block and save.
    thanks
    G. Lakshmipathi

  • List of open orders quantity size wise

    HI Experts,
    Is there any report or table to see the list of open orders quantity size wise .....please help me..
    Regards
    Vishnu

    Dear Reddy,
    The size which you are telling is that having different material codes?
    If so means enter the material code and plant combination and select the status for which you want to search.(Select the proper
    list in COOIS).
    Cehck and revert
    Regards
    S Mangalraj

  • List of open orders

    Hi Guys,
    How to get list of open orders in table??

    try out VA05.
    if it is sales office level information, is required then you can have the sales office column added using the available layout options in VA05.
    if the sales man is marked under partner function, then you may need to extract the VA05 output & filter the sales order using VBPA table with parameters of sales man controlled in the selection screen.
    rgds
    ilango

Maybe you are looking for