Auto configure AE from MOXL server?

Hello again,
I have Mac OS X Server on a recent iMac, bought dec 2007 and updated at v. 10.5.2
The iMac with leopard server is sitting behind an airport Extreme also late 2007 at v. 5.3.1 and connected to it throught ethernet.
I gave the iMac a static IP in Airport DHCP.
How do I tell the iMac to automatically configure the Airport Extreme ports when I switch the server to HTTPS or kick in Kerberos for example?
And do the web module turn on and off automatically when I change HTTPS and or Kerberos?
List: Actual iMac server open ports as seen from Network utility:
Open TCP Port: 22 ssh
Open TCP Port: 53 domain
Open TCP Port: 88 kerberos
Open TCP Port: 106 3com-tsmux
Open TCP Port: 311 asip-webadmin
Open TCP Port: 389 ldap
Open TCP Port: 443 https
Open TCP Port: 625 dec_dlm
Open TCP Port: 636 ldaps
Open TCP Port: 749 kerberos-adm
Open TCP Port: 3659 apple-sasl
If it can't be done auto-config,
Which of the above listed ports should be routed trough the AE to the server?
Thanks.

Hello drx1,
Thanks for trying your best.
When a server is straight on a public internet IP, changing services on the server opens or closes the ports on the server and that's all that is needed.
When there is a router like Airport Extreme in between the net and the server, I think that I then have to tell manually the AE which ports to NAT map to the server. If I turn on ftp on the server, i'd need the AE to NAT map ftp to the server.
I have seen something about a server or client able to automatically configure the Airport port upon services changes.
I can't trace where and what that was.
Suggestions? Thanks.

Similar Messages

Can't get mobile device to auto configure the active sync server

Hello
I am trying to get my costumer mobile devices to auto configure the active sync server name so they don't have to type it in. I believe I have everything in place Certificates are fine. I populated the external url on the active sync
object in Exchange.
DNS is set up correct. I ran the Exchange Connectivity Analyzer and it runs perfectly. The only test step if fails on is the first attempt to contact the autodiscover service using just the domain name and that is because we have a
record in DNS so our domain name points to our public web server but all the other tests run fine. At the end, it even displays the xml file contents and shows me the external url of the active sync object.
I get a successful run but it first shows SSL certifiate of our public Web site and then hangs on the server config and then prompts me to enter in the server name and domain. My external url in Exchange looks like this:
https://remote.domain.com/Microsoft-Server-ActiveSync
Any Help??
Eddie

Thank you for replaying but there is already internal A record that points to Exchange server. Firewall, DNS external and internal are setup like this:
Firewall:
Port 443 and 25 points to Internal IP of our Exchange 2013 (only mail server in company).
Port 80 not open.
External DNS records:
autodiscover.mydomain.com à points to our WAN IP
remote.mydomain.com à points to our WAN IP
mydomain.com à points to external online webhosting
Internal DNS records:
autodiscover.mydomain.com à points to ours Exchange 2013 internal IP
Remote.mydomain.com à points to ours Exchange 2013 internal IP
mydomain.com à points to external online webhosting
Test form "ExchangeConnectivityTest.com" is Successful but with warnings.
Warnings are about https://mydomain.com/AutoDiscover/AutoDiscover.XML
because
https://mydomain.com is
pointing to website, which is hosted externally.
Eddie

Configuring alerts from PM server rather than workstations/servers

Hi, I was wondering if there was a way to configure alerts so that they were only sent from the PM server rather than the local host? At the moment we use SMTP which I'd like to re-configure it make this more secure. Are there any other optiosn that we could use? Regards,Al

Hello, I don't think it's possible or at least not without using external software. The F-Secure Management Agent (FSMA) runs on the endpoints and creates the alerts there, sending them to an SMTP server and/or PMS. However, there is or there was an "F-Secure Email Reporting VB Script" that uses F-Secure Policy Manager Web Reporting (PMWR) to create MHTML and then send that file via e-mail. Scheduling is based on Windows Scheduling. In more ancient times, there was something called "Policy Manager Reporting Option 5.50" which provided a command-line interface and you could have possibly scripted it. However, that was way before the transition from FSPM shared folder model to the H2 active database took place, so it is now a museum exhibit piece of software I think. Best Regards:Tamas Feher, 2F 2000, Hungary.

File from application server-- Email ?

Hi,
I need to pickup a file from application server and Email the same to the intended receipents through ABAP program
For that i had used the following code:
REPORT ZEMAIL_APP_SER_FAIL.
DATA :is_doc_chng        TYPE sodocchgi1,
      it_objtxt          TYPE STANDARD TABLE OF solisti1,
      is_objtxt          TYPE solisti1,
      it_objpack         TYPE STANDARD TABLE OF sopcklsti1,
      is_objpack         TYPE sopcklsti1,
      it_objbin          TYPE STANDARD TABLE OF solisti1,
      is_objbin          TYPE solisti1,
      it_reclist         TYPE STANDARD TABLE OF somlreci1,
      is_reclist         TYPE somlreci1,
      w_lines_tx         TYPE i.
** Create Message Body
**   Title and Description
*is_doc_chng-obj_name = 'MAIL'.
is_doc_chng-obj_descr = 'Auto genareted Mail from Application server'.
** main text
is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
APPEND is_objtxt TO it_objtxt.
is_objtxt-line = space.
APPEND is_objtxt TO it_objtxt.
*   write packing list (main)
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ     TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num   = 0.
is_objpack-body_start = 1.
is_objpack-body_num   = w_lines_tx.
is_objpack-doc_type   = 'CVS'.
is_objpack-OBJ_NAME   = 'GIND_EXP'.
is_objpack-Obj_langu = 'E'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'XXX'@'YYY'.COM'.
is_reclist-rec_type = 'A'.
Break-point.
*is_reclist-REC_ID   = 'XXX@YYY'.COM'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
   document_data              = is_doc_chng
   put_in_outbox              = 'X'
   commit_work                = 'X'
TABLES
   packing_list               = it_objpack
   contents_txt               = it_objtxt
   receivers                  = it_reclist
EXCEPTIONS
   too_many_receivers         = 1
   document_not_sent          = 2
   document_type_not_exist    = 3
   operation_no_authorization = 4
   parameter_error            = 5
   x_error                    = 6
   enqueue_error              = 7
   OTHERS                     = 8.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
when i execute this program:
I get the following error msg:
Activation setting not yet maintained
May i know what is the problem?

If you are sending an email, the receiver type should be U (internet mail address type). From your code it appears that you have input it as 'A'. I am not sure if the error message is related to this. Have you checked in transaction SOST, whether an email has been triggered from your program? At what point of execution is this error message triggered?

Does Mac OS X Server 10.6 Auto Configure a Connected Airport Basestation?

I just finished an install of Snow Leopard Server on a new Mac Mini. A 1TB Airport Time Capsule is directly connected to the Mini via Ethernet (and our cable internet modem is also directly connected via Ethernet to the Time Capsule).
I have a static IP address.
During the installation of the server onto the Mini there seemed to be a period during which the server took control of the Airport device and auto-configured it then reset it. At first, it seemed that all services were available externally (i.e. web) from the internet.
However, I may have been wrong as now none of the services respond from outside the network.
I thought that Mac OS X Server would automatically configure an attached Airport device. Is that correct? Or must I work through the Airport device and manually configure all of the port settings to enable external access?

First off I would check the console and see what it says when you try to log in with the admin account. It will give a message saying what the issue is.
Also is this a local admin or a network admin account?

Configure IP pool from radius server

Hi, all
My ADSL system's using a ERX-700 (juniper) as a BRAS and 7206 for backup.
Everything is alright except assigning name of pool to BRAS.
ERX-700 use frame-pool attr to provide pool name instead of addr-pool attr as 7206.
IOS can unsupport this attr but I can't configure both attr on radius.
Can you help to overcome this problem
Thanks a lot.

This is a radius issue. It does depends on the AAA server you're using how to configure both NASes independently.
For instance, if you would be using NavisRadius product as AAA server to configure which attributes to send back per NAS is really piece of cake:
1) First, you have you to define how to identify separately both NASes, either by IP, technology, by checking the calling-station-id, or whatever.
Supposing you do use IP, which maybe is easier, you do have to define a clients file, for instance:
10.0.0.1 secret_key ERX700
10.0.0.2 secret_key2 Cisco7200
10.0.0.3 secret_key3 AS5800
2) Depending on who's sending the request define what to do next and what attributes send back. With NavisRadius you make this thru a Policy Flow, which is like a set of instructions to configure it, either manually or thru a GUI. Thru this set you could do for instance:
checkClientClass Method-Type="Branch"
Branch-Case = "Cisco7200\tsetIPAdressPoolA"
Branch-Case = "ERX700\tsetIPforERX"
Branch-Case = "AS5800\tsetIpsecService"
Branch-Case = "*\tUnknownClient"
Branch-SelectMode = "KEY"
Branch-SearchKey = "${client.Client-Class}"
3) And finally depending on the tag used go to another method which sends the needed attributes back to the NAS or do whatever you want to do depending on the case.
This is a very brief example, since the product is really flexible and allows many other possibilities, like getting the IP pools from another server, etc.
Good luck!

Replication Configuration issue after migrating from SQL Server 2005 to SQL Server 2008 R2

Hi All,
This weekend we have migrated one of our Core system from SQL Server 2005 SP3 to SQL Server 2008 R2 SP2. Migration went successful. However when we are trying to Configure transaction replication we are getting below Error:
Msg 21854, Level 16, State 1, Procedure sp_MSrepl_addarticle, Line 573
Could not add new article to publication 'abc' because of active schema change activities or a snapshot is being generated.
Background:
Database compability Changed from 90 to 100.
A quick Help would be appreciated.
Best Regards - Viral
Thanks - Viral

Is a snapshot being generated? the message seems to indicate one is.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Websites were deleted from configuration after Maverick OSX Server Update

Websites were deleted from configuration after Maverick OSX Server Update. My subversion access was also overwritten and no longer works.

if that was a bug report, then Apple might or might not see it here. There's a Provide Server Feedback in the menus of Server.app, if you'd like to let the Server.app folks know about the upgrade problems I've encountered.
If you're looking for help resetting the web sites (I'm not clear if you're reporting a bug or looking for help with this), then check Server.app for where the files should be (the default location is under /Library/Server/Web/Data directory) and see where your current sites are stored in the file system, establish the Site via Server.app (usually with a directory under the /Library/Server/Web/Data path) and move the contents over to the new location.
As for the Outlook comment in your footer, Microsoft Outlook also generally needs to have the FQDN requirements removed in the SMTP HELO processing. Outlook doesn't send that, and the default Postfix configuration will reject those connections as spam. Here's a discussion of how to do this. (I don't see a path to the HELO processing via sudo serveradmin settings mail:postfix commands.)

HT203071 How does the clients (iOS devices) to configure/use the caching server to download apps from local caching server instead of App store?

Hi ... How does the clients (iOS devices) to configure/use the caching server to download apps from local caching server instead of App store?

Hi,
If you want to restore a reomoved app,you need to use
Add-AppxPackage to add a signed app package (.appx) to a user account.
But we cannot extract them from the ISO.
The behavior is by design.And this is a software protection regime.
Thanks for your understanding.
Regards,
Kelvin Xu
TechNet Community Support

Auto Installation of a Print Driver from the Server?

Hi all,
I hope this is the correct forum for this question. I am fairly new at setting up Mac Servers and was looking for some advice. I am trying to set up a Mac 10.6 Server as a print server. I am familiar with setting up printing services on W2k3 servers, but have some questions about this on a Mac server. On a Windows server, once I have installed the printer with the correct driver and shared it out, users just need to connect to the server's print queue and the correct driver is automatically downloaded from the server and installed on the workstation. On the Mac server, it seems that even after I have set up the print queue and installed the needed driver, when I connect a Mac workstation to the queue, it automatically tries to use the Generic Postscript Driver. I then have to manually download and install the needed driver for the printer. Is there any way to get the Mac workstations to automatically download and install the driver from the server, or do I have to pre-load the needed driver on each Mac that will be using the shared printer?

tmcbride wrote:
Hi all,
I hope this is the correct forum for this question. I am fairly new at setting up Mac Servers and was looking for some advice. I am trying to set up a Mac 10.6 Server as a print server. I am familiar with setting up printing services on W2k3 servers, but have some questions about this on a Mac server. On a Windows server, once I have installed the printer with the correct driver and shared it out, users just need to connect to the server's print queue and the correct driver is automatically downloaded from the server and installed on the workstation. On the Mac server, it seems that even after I have set up the print queue and installed the needed driver, when I connect a Mac workstation to the queue, it automatically tries to use the Generic Postscript Driver. I then have to manually download and install the needed driver for the printer. Is there any way to get the Mac workstations to automatically download and install the driver from the server, or do I have to pre-load the needed driver on each Mac that will be using the shared printer?
A Mac Server can distribute Windows print drivers (along with settings) to Windows clients. It does it exactly the same way as Linux Samba servers and (older) Windows servers. This is done by creating a special hidden share point (using SMB), it is special in that it uses the name print$ the drivers and settings are then loaded (from a Windows PC) in to this share, and subsequent PCs can then automatically download them.
See http://www.techrepublic.com/article/techrepublic-tutorial-automate-desktop-print er-setup-with-samba/1053286 for some more information on how to do this.
Note: My past experience has seen the associated .tdb databases for this function stored on this share often get corrupted meaning one had to re-upload (from a Windows PC) the drivers again. Also despite the automatic distribution of drivers and settings being something Windows has done for decades, Apple are still very poor at this in terms of the equivalent Mac (server) to Mac (client). Finally, I have not seen (yet) whether this approach is possible with Windows 7 clients.

When i configure mail account using POP3, i am not getting any sync option to sync from mail server, Any solution ? don't ask me to configure using IMAP

And in IMAP mail server ctrl+shift+M (to copy same mail to target folder ) shortcut is also not working.

POP account do not sync. They are one way communication from the server. There is no need for s sync option with POP.

How do you configure a client to update from the server

I found the information on how to point clients to a software update server but the problem I have is the URL.
The example is http://su.example.com:8088/index.sucatalog
I don't have a URL as far as I know and if I did, is the default port 8088 or where can I change or check that?
And where is a list of the catalog file for the specific versions of OS X?
Basically I have 8 Macs all running Yosemite except for one running 10.8.5. Instead of all the machines hitting the internet for updates, I'd like just my server to down the updates and then all clients update from the server.
If there is better instructions on how to do this, please point the way.
TIA
Chris

John Lockwood wrote:
This does mean you need to buy a DNS load balancer to do this. The Mac itself cannot.
FWIW, OS X Server is capable of performing round-robin access with the inbound traffic using multiple IP addresses for a single host name. The addresses are each of the software update servers in your server pool.
This'll toss errors for some translations when one of the servers is down — you can tweak the definition if one of the servers is going to be offline for a while — but some of the updates will get through.
Set the DNS TTL fairly short — probably somewhere between a few minutes and an hour — to allow the DNS translations to be changed fairly quickly, if your software update servers are prone to outages.

Can't authenticate Mac VPN client from RADIUS server

Hello,
I'm a real noob here so please bear with me.
I have been able to configure my PIX 515E to allow VPN connections onto my network, but what I need to do is set up some sort of user authentication to control access at a user level. From what I've read here and in the Configuration Guide I should be able to do this authentication with a RADIUS server. I'm running a Corriente Networks Elektron Security server which has RADIUS server capabilities. It is running on my (inside) interface at IP 192.168.10.26.
I thought that I had everything configured properly but it never seems to authenticate. I connect, the XAUTH window pops up, I add my username and password as it's configured on my RADIUS server, but when I click OK it just cycles the progress bar at the bottom and eventually times out. The client log doesn't show me anything and the log on the RADIUS server shows me nothing. Any ideas? this seems like it should be simple because I can connect until I attempt to authenticate to the RADIUS server.
TIA for any direction you can provide me.
Christine

If it helps, here is my config with a some of the non-related bits deleted:
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 DMZ security50
enable password ********* encrypted
passwd ******* encrypted
hostname pixfirewall
domain-name acme.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol http 80
fixup protocol http 82
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
access-list inside_outbound_nat0_acl permit ip any 192.168.10.0 255.255.255.0
access-list inside_outbound_nat0_acl permit ip host 192.168.10.26 192.168.10.192 255.255.255.224
access-list inside_outbound_nat0_acl permit ip host 192.168.10.69 192.168.10.192 255.255.255.224
access-list outside_cryptomap_dyn_20 permit ip any 192.168.10.0 255.255.255.0
access-list outside_cryptomap_dyn_40 permit ip any 192.168.10.192 255.255.255.224
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
ip address outside 207.XXX.XXX.130 255.255.255.0
ip address inside 192.168.10.1 255.255.255.0
ip address DMZ 192.168.100.1 255.255.255.0
multicast interface inside
ip audit info action alarm
ip audit attack action alarm
ip local pool CBI_VPN_Pool 192.168.10.201-192.168.10.220
pdm location 192.168.10.50 255.255.255.255 inside
pdm group CBI_Servers inside
pdm logging warnings 100
pdm history enable
arp timeout 14400
global (outside) 200 interface
global (DMZ) 200 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 200 192.168.10.0 255.255.255.0 0 0
static (inside,outside) 207.XXX.XXX.150 192.168.10.27 netmask 255.255.255.255 0 0
static (inside,outside) 207.XXX.XXX.132 192.168.10.26 dns netmask 255.255.255.255 0 0
access-group 100 in interface outside
route outside 0.0.0.0 0.0.0.0 207.XXX.XXX.129 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server radius-authport 1812
aaa-server radius-acctport 1812
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server RADIUS (inside) host 192.168.10.26 ************* timeout 10
aaa-server LOCAL protocol local
http server enable
http 192.168.10.3 255.255.255.255 inside
no floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication RADIUS
crypto map outside_map interface outside
crypto map inside_map interface inside
isakmp enable outside
isakmp nat-traversal 3600
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup Test_VPN address-pool CBI_VPN_Pool
vpngroup Test_VPN dns-server 142.77.2.101 142.77.2.36
vpngroup Test_VPN default-domain acme.com
vpngroup Test_VPN idle-time 1800
vpngroup Test_VPN authentication-server RADIUS
vpngroup Test_VPN user-authentication
vpngroup Test_VPN user-idle-timeout 1200
vpngroup Test_VPN password ********
ssh timeout 5
console timeout 0
dhcpd address 192.168.10.100-192.168.10.254 inside
dhcpd dns 142.77.2.101 142.77.2.36
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside

Lync 2010 Certificate Issue - "There was a problem verifying your certificate from the server"

Greetings.
My Issue:
Lync 2010 client does not connect to server;error displayed "Cannot sign into Lync. There was a problem verifying the certificate from the server."
Description:
The client is running on my Windows 7 box, and my CA server is a Windows Server 2003 box. I have installed the hotfix on the Server 2003 box to update the Web Enrollment portion of CA to allow for newer clients (Vista and 7) to receive certificates from
this server.
Lync server is running on Server 2008 R2 STD, installation was a success.
The Windows 7 box is a part of the domain.
I have manually exported the Root CA from my Enterprise CA server from
Trusted Root Certification Authorities -> Certificates and imported into the same location on my Windows 7 box.
If I look at the certification path on the Root CA, on my Windows 7 box, it says "The certificate is OK." The same goes for the servers involved.
Still nothing.
I have read the other forum posts on here about people having success once they manually import the Root CA from the Enterprise CA server, but this is not my case here.
All certificates are successfully assigned on the Lync server box; however, I did have to manually import the Root CA into Lync server's
Trusted Root Certification Authorities -> Certificates before I could successfully assign them. Had to do this on another deployment I completed, so I didn't think anything of it.
To recap: it seems that even with my Root CA imported into my Windows 7 box I can still not connect to my Lync server with the client, and I get the error message "There was a problem verifying the certificate from the server."

Solved
Solution : Export certificate from Lync Server Start > Administrative Tools > IIS > Server Certificate > Export > abc.pfx save it, Copy and place the certificate where Ms Lync 2010 client is installed or getting certificate
error. Follow these steps on client machine to install certificate
Run > mmc > add or remove snap in > certificates > computer account > local computer >finish > ok > expand Certificate > Trusted Root Certification Authorities > Certificate > All task > Import > copy abc.pfx certificate
and delete unnecessary certificate from there.
Restart Client machine and open microsoft Lync client 2010 and open option menu > Personal > Advanced > choose Auto Configuration > save ok

Auto Configure not prompting for credentials

Hi Folks,
I've a problem where users of Outlook on XenApp cannot configure an email profile. It just times out. I access the same XenApp server/user account from a Published Desktop or RDP the profile configures fine.
The Outlook Auto Configuration tool works identically in both scenarios except for the last step. On the Published Desktop I am prompted for domain credentials and then sent the Autodiscover XML file. However, over a XenApp session Auto Configuration never
prompts for login details, although the log say differently, and the attempt fails.
I turned on Outlook logging and captured Autodiscover logs for both scenarios (identifying information is changed to NWTraders)
Log of Autodiscover failure over a XenApp session
11676 0x0073AF1C
02/05/15 13:13:07 Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml starting 11676
0x0073B22A 02/05/15 13:13:08
GetLastError=0; httpStatus=401. 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover disabled auth schemes: 11676
0x0073B22A 02/05/15 13:13:08
<NONE> 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover supported auth schemes: 11676
0x0073B22A 02/05/15 13:13:08
Negotiate 11676 0x0073B22A
02/05/15 13:13:08 NTLM 11676
0x0073B22A 02/05/15 13:13:08
Basic 11676 0x0073B22A
02/05/15 13:13:08 AutoDiscover attempting Auto-Negotiate with Desktop Credentials. 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B22A 02/05/15 13:13:08
Negotiate 11676 0x0073B258
02/05/15 13:13:08 GetLastError=0; httpStatus=401. 11676
0x0073B258 02/05/15 13:13:08
AutoDiscover attempting NTLM with Desktop Credentials. 11676
0x0073B258 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B258 02/05/15 13:13:08
NTLM 11676 0x0073B287
02/05/15 13:13:08 GetLastError=0; httpStatus=401. 11676
0x0073B287 02/05/15 13:13:08
AutoDiscover attempting supplied Credentials. 11676
0x0073B287 02/05/15 13:13:08
[email protected] 11676
0x0073B287 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B287 02/05/15 13:13:08
Negotiate 11676 0x0073C563
02/05/15 13:13:13 GetLastError=0; httpStatus=401. 11676
0x0073C563 02/05/15 13:13:13
AutoDiscover attempting Basic auth with the Supplied Credentials. 11676
0x0073C563 02/05/15 13:13:13
[email protected] 11676
0x0073C563 02/05/15 13:13:13
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073C563 02/05/15 13:13:13
Basic 11676 0x0073CE7C
02/05/15 13:13:15 GetLastError=0; httpStatus=401. 11676
0x0073CE9B 02/05/15 13:13:15
AutoDiscover attempting AutoDiscover Credentials. 11676
0x0073CE9B 02/05/15 13:13:15
[email protected] 11676
0x0073CE9B 02/05/15 13:13:15
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073CE9B 02/05/15 13:13:15
Negotiate 11676 0x0073D84F
02/05/15 13:13:17 GetLastError=0; httpStatus=401. 11676
0x0073D85F 02/05/15 13:13:17
AutoDiscover attempting AutoDiscover Credentials. 11676
0x0073D85F 02/05/15 13:13:17
[email protected] 11676
0x0073D86E 02/05/15 13:13:17
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073D86E 02/05/15 13:13:17
Negotiate 11676 0x0073E204
02/05/15 13:13:20 GetLastError=0; httpStatus=401. 11676
0x0073E204 02/05/15 13:13:20
AutoDiscover prompting for Exchange credentials. 11676
0x0073E213 02/05/15 13:13:20
Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml Failed (0x80040113) 11676
0x0073E213 02/05/15 13:13:20
AutoDiscover Warning: ExcludeHttpRedirect is ON. 11676
0x0073E213 02/05/15 13:13:20
AutoDiscover Warning: ExcludeSrvRecord is ON. 11676
0x0073E213 02/05/15 13:13:20
AUTODISCOVER GET SETTINGS END 11676
0x0073E213 02/05/15 13:13:20
Log of Autodiscover success over Published Desktop (works same over RDP)
02/05/15 13:11:40 Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml starting 12244
0x00725EBF 02/05/15 13:11:41
GetLastError=0; httpStatus=401. 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover disabled auth schemes: 12244
0x00725EBF 02/05/15 13:11:41
<NONE> 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover supported auth schemes: 12244
0x00725EBF 02/05/15 13:11:41
Negotiate 12244 0x00725EBF
02/05/15 13:11:41 NTLM 12244
0x00725EBF 02/05/15 13:11:41
Basic 12244 0x00725EBF
02/05/15 13:11:41 AutoDiscover attempting Auto-Negotiate with Desktop Credentials. 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725EBF 02/05/15 13:11:41
Negotiate 12244 0x00725EEE
02/05/15 13:11:41 GetLastError=0; httpStatus=401. 12244
0x00725EEE 02/05/15 13:11:41
AutoDiscover attempting NTLM with Desktop Credentials. 12244
0x00725EEE 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725EEE 02/05/15 13:11:41
NTLM 12244 0x00725F1D
02/05/15 13:11:41 GetLastError=0; httpStatus=401. 12244
0x00725F2C 02/05/15 13:11:41
AutoDiscover attempting supplied Credentials. 12244
0x00725F2C 02/05/15 13:11:41
[email protected] 12244
0x00725F2C 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725F2C 02/05/15 13:11:41
Negotiate 12244 0x0072719B
02/05/15 13:11:46 GetLastError=0; httpStatus=401. 12244
0x007271AB 02/05/15 13:11:46
AutoDiscover attempting Basic auth with the Supplied Credentials. 12244
0x007271AB 02/05/15 13:11:46
[email protected] 12244
0x007271AB 02/05/15 13:11:46
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x007271AB 02/05/15 13:11:46
Basic 12244 0x00727AC3
02/05/15 13:11:48 GetLastError=0; httpStatus=401. 12244
0x00727AF2 02/05/15 13:11:48
AutoDiscover attempting AutoDiscover Credentials. 12244
0x00727AF2 02/05/15 13:11:48
[email protected] 12244
0x00727AF2 02/05/15 13:11:48
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00727AF2 02/05/15 13:11:48
Negotiate 12244 0x007285CF
02/05/15 13:11:51 GetLastError=0; httpStatus=401. 12244
0x007285EE 02/05/15 13:11:51
AutoDiscover attempting AutoDiscover Credentials. 12244
0x007285EE 02/05/15 13:11:51
[email protected] 12244
0x007285EE 02/05/15 13:11:51
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x007285EE 02/05/15 13:11:51
Negotiate 12244 0x00728F93
02/05/15 13:11:53 GetLastError=0; httpStatus=401.12244
0x00728F93 02/05/15 13:11:53
AutoDiscover prompting for Exchange credentials. 12244
0x0072B25D 02/05/15 13:12:02
corpNWTraders\jsmith 12244
0x0072B25D 02/05/15 13:12:02
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x0072B25D 02/05/15 13:12:02
Negotiate 12244 0x0072BB95
02/05/15 13:12:05 GetLastError=0; httpStatus=200. 12244
0x0072BB95 02/05/15 13:12:05
Autodiscover XML Received
12244 ---BEGIN XML---
I have the Autodiscover methods which use Active Directory turned off because the Exchange service is not on my domain or a Trusted domain. So we are relying on the HTTPS method only
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeScpLookup is ON.
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeHttpsRootDomain is ON.
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeHttpsAutoDiscoverDomain is ON.
Regards - Mic

Hi,
Based on the information you provided, the issue was caused by an Autodiscover failure. To troubleshoot the issue, I suggest you post the question in Exchange forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Auto configure AE from MOXL server?

Similar Messages

Maybe you are looking for