Auto-configure X and Desktop?
Hi,
Is it possible to auto-configure X and Desktop, from the install menu? From my install experience I think not, if such is the case, is this in the roadmap of development for the distribution?
Thanks,
Not from the Arch's install, the wiki is helpful for how to configure, especially the Beginner's Guide and you also might want to look at the Arch Way. If you really want an arch-like system that's pre-configured you might want to look into Chakra. It's still only an alpha installer, but it works reasonably well in my experience.
Similar Messages
-
How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?
I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx -
How do I configure my iMac to auto sync Pages and Keynote
How do I configure my iMac to auto sync Pages and Keynote documents with iCloud like my iPad and iPhone does. Note I've updated all devices to the latest software and I have iCloud configured for sharing on all but, neither app on my iMac auto finds and sync documents.
Carolyn,
Thanks but, I have iCloud setup and I'm signed into the same account on all devices. I don't think I was clear is stating my problem with or expectations of the iCloud document syncing function. I'm able to create a Pages document (suffix *.pages document) on my iMac and save it in the mobile documents folder but once I access it on my iPad the suffix changes to a "jpg" file and Pages can not open a "jpg" file.
When working on the document on my iPad, the only way I can save it a in the ".pages document" format is to push it though iTunes and then go into iTune on my iMac and save the document down to my destop or document folder. My expectation is that like the iCal, Contacts, Music, and Apps syncing, the document and data functions would be/should be seemless (i.e. same format on the OS platform as it is on the iOS platforms).
It may be a bridge too far to Apple right now but, if they implemented this capability it would be awesome.
Thanks again for your assistance,
R,
Seed 2.0 -
Java proxy auto-configuration and Microsoft PAC script extensions
Hi,
Within our proxy auto-configuration PAC script, we have to use the Microsoft IPv6 PAC script extensions such as myIPAddressEx rather than the old myIPAddress. This is required in order to get the PC's internal 10.0.0.0/8 IPv4 address rather than the IPv6 or wi-fi card addresses that are often returned when using myIPAddress.
However, as soon as we change from myIPAddress to myIPAddressEx, Java seems to be unable to process the PAC script.
Here are the extensions (introduced many years ago:
IPv6-Aware Proxy Helper API Definitions (Windows)
Question - does Java support these extensions or have plans to?
Thanks,
Kev.Proxy auto config files are Javascripts that parse the requested URL and return a response to the browser telling it where to go to get the content.
More info is available in multiple formats -
Auto Configure not prompting for credentials
Hi Folks,
I've a problem where users of Outlook on XenApp cannot configure an email profile. It just times out. I access the same XenApp server/user account from a Published Desktop or RDP the profile configures fine.
The Outlook Auto Configuration tool works identically in both scenarios except for the last step. On the Published Desktop I am prompted for domain credentials and then sent the Autodiscover XML file. However, over a XenApp session Auto Configuration never
prompts for login details, although the log say differently, and the attempt fails.
I turned on Outlook logging and captured Autodiscover logs for both scenarios (identifying information is changed to NWTraders)
Log of Autodiscover failure over a XenApp session
11676 0x0073AF1C
02/05/15 13:13:07 Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml starting 11676
0x0073B22A 02/05/15 13:13:08
GetLastError=0; httpStatus=401. 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover disabled auth schemes: 11676
0x0073B22A 02/05/15 13:13:08
<NONE> 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover supported auth schemes: 11676
0x0073B22A 02/05/15 13:13:08
Negotiate 11676 0x0073B22A
02/05/15 13:13:08 NTLM 11676
0x0073B22A 02/05/15 13:13:08
Basic 11676 0x0073B22A
02/05/15 13:13:08 AutoDiscover attempting Auto-Negotiate with Desktop Credentials. 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B22A 02/05/15 13:13:08
Negotiate 11676 0x0073B258
02/05/15 13:13:08 GetLastError=0; httpStatus=401. 11676
0x0073B258 02/05/15 13:13:08
AutoDiscover attempting NTLM with Desktop Credentials. 11676
0x0073B258 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B258 02/05/15 13:13:08
NTLM 11676 0x0073B287
02/05/15 13:13:08 GetLastError=0; httpStatus=401. 11676
0x0073B287 02/05/15 13:13:08
AutoDiscover attempting supplied Credentials. 11676
0x0073B287 02/05/15 13:13:08
[email protected] 11676
0x0073B287 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B287 02/05/15 13:13:08
Negotiate 11676 0x0073C563
02/05/15 13:13:13 GetLastError=0; httpStatus=401. 11676
0x0073C563 02/05/15 13:13:13
AutoDiscover attempting Basic auth with the Supplied Credentials. 11676
0x0073C563 02/05/15 13:13:13
[email protected] 11676
0x0073C563 02/05/15 13:13:13
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073C563 02/05/15 13:13:13
Basic 11676 0x0073CE7C
02/05/15 13:13:15 GetLastError=0; httpStatus=401. 11676
0x0073CE9B 02/05/15 13:13:15
AutoDiscover attempting AutoDiscover Credentials. 11676
0x0073CE9B 02/05/15 13:13:15
[email protected] 11676
0x0073CE9B 02/05/15 13:13:15
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073CE9B 02/05/15 13:13:15
Negotiate 11676 0x0073D84F
02/05/15 13:13:17 GetLastError=0; httpStatus=401. 11676
0x0073D85F 02/05/15 13:13:17
AutoDiscover attempting AutoDiscover Credentials. 11676
0x0073D85F 02/05/15 13:13:17
[email protected] 11676
0x0073D86E 02/05/15 13:13:17
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073D86E 02/05/15 13:13:17
Negotiate 11676 0x0073E204
02/05/15 13:13:20 GetLastError=0; httpStatus=401. 11676
0x0073E204 02/05/15 13:13:20
AutoDiscover prompting for Exchange credentials. 11676
0x0073E213 02/05/15 13:13:20
Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml Failed (0x80040113) 11676
0x0073E213 02/05/15 13:13:20
AutoDiscover Warning: ExcludeHttpRedirect is ON. 11676
0x0073E213 02/05/15 13:13:20
AutoDiscover Warning: ExcludeSrvRecord is ON. 11676
0x0073E213 02/05/15 13:13:20
AUTODISCOVER GET SETTINGS END 11676
0x0073E213 02/05/15 13:13:20
Log of Autodiscover success over Published Desktop (works same over RDP)
02/05/15 13:11:40 Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml starting 12244
0x00725EBF 02/05/15 13:11:41
GetLastError=0; httpStatus=401. 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover disabled auth schemes: 12244
0x00725EBF 02/05/15 13:11:41
<NONE> 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover supported auth schemes: 12244
0x00725EBF 02/05/15 13:11:41
Negotiate 12244 0x00725EBF
02/05/15 13:11:41 NTLM 12244
0x00725EBF 02/05/15 13:11:41
Basic 12244 0x00725EBF
02/05/15 13:11:41 AutoDiscover attempting Auto-Negotiate with Desktop Credentials. 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725EBF 02/05/15 13:11:41
Negotiate 12244 0x00725EEE
02/05/15 13:11:41 GetLastError=0; httpStatus=401. 12244
0x00725EEE 02/05/15 13:11:41
AutoDiscover attempting NTLM with Desktop Credentials. 12244
0x00725EEE 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725EEE 02/05/15 13:11:41
NTLM 12244 0x00725F1D
02/05/15 13:11:41 GetLastError=0; httpStatus=401. 12244
0x00725F2C 02/05/15 13:11:41
AutoDiscover attempting supplied Credentials. 12244
0x00725F2C 02/05/15 13:11:41
[email protected] 12244
0x00725F2C 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725F2C 02/05/15 13:11:41
Negotiate 12244 0x0072719B
02/05/15 13:11:46 GetLastError=0; httpStatus=401. 12244
0x007271AB 02/05/15 13:11:46
AutoDiscover attempting Basic auth with the Supplied Credentials. 12244
0x007271AB 02/05/15 13:11:46
[email protected] 12244
0x007271AB 02/05/15 13:11:46
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x007271AB 02/05/15 13:11:46
Basic 12244 0x00727AC3
02/05/15 13:11:48 GetLastError=0; httpStatus=401. 12244
0x00727AF2 02/05/15 13:11:48
AutoDiscover attempting AutoDiscover Credentials. 12244
0x00727AF2 02/05/15 13:11:48
[email protected] 12244
0x00727AF2 02/05/15 13:11:48
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00727AF2 02/05/15 13:11:48
Negotiate 12244 0x007285CF
02/05/15 13:11:51 GetLastError=0; httpStatus=401. 12244
0x007285EE 02/05/15 13:11:51
AutoDiscover attempting AutoDiscover Credentials. 12244
0x007285EE 02/05/15 13:11:51
[email protected] 12244
0x007285EE 02/05/15 13:11:51
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x007285EE 02/05/15 13:11:51
Negotiate 12244 0x00728F93
02/05/15 13:11:53 GetLastError=0; httpStatus=401.12244
0x00728F93 02/05/15 13:11:53
AutoDiscover prompting for Exchange credentials. 12244
0x0072B25D 02/05/15 13:12:02
corpNWTraders\jsmith 12244
0x0072B25D 02/05/15 13:12:02
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x0072B25D 02/05/15 13:12:02
Negotiate 12244 0x0072BB95
02/05/15 13:12:05 GetLastError=0; httpStatus=200. 12244
0x0072BB95 02/05/15 13:12:05
Autodiscover XML Received
12244 ---BEGIN XML---
I have the Autodiscover methods which use Active Directory turned off because the Exchange service is not on my domain or a Trusted domain. So we are relying on the HTTPS method only
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeScpLookup is ON.
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeHttpsRootDomain is ON.
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeHttpsAutoDiscoverDomain is ON.
Regards - MicHi,
Based on the information you provided, the issue was caused by an Autodiscover failure. To troubleshoot the issue, I suggest you post the question in Exchange forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Thin PC - Remoteapp and Desktop Connections
Hi this is a copy of my post in the Windows 7 misc forum where it's getting no relevant replys.
Has anyone been able to get this working?
All I get is error 1000 which is that the thin pc can not find the rdgateway or app server.
I know that they are both working and accessible from this machine, I can drag an rdp to the desktop and it runs, I can go to the rdweb site and run applications from there.
I have a full windows 7 test bed and running the wcx config file poulates the remote app programs and I can go to the control panel and type in the url and that works.
I have turned off all the firewalls, the thin pc is configured for hyper-v management and just about everything else works.
As this is the pricnipal use of thin pc - a hyper-v client has anyone got any ideas ?Hi Alan,
Steps taken.
ThinPC is a clean install, everything default except time and country set to UK. Hyper-v configured using the technet script for VDI. Local admin account enabled and joined to domain.
Log in as domain admin, go to control panel, remoteapp and desktop connections.
enter string for remote app feed -
https://natag.-*-.-*-.-*-/RDWeb/Feed/webfeed.aspx
Accept warning, screen changes to adding connection resources, screen changes to : An error has occured. Contact your workplace administrator for assistance.
Error in event log under remote app and desktop connections - Error 09/06/2011 09:44:31 RemoteApp and Desktop Connections 1000 Setup
Log Name: Microsoft-Windows-RemoteApp and Desktop Connections/Admin
Source: Microsoft-Windows-RemoteApp and Desktop Connections
Date: 09/06/2011 09:44:31
Event ID: 1000
Task Category: Setup
Level: Error
Keywords:
User: DOMAIN\ADMINACC**
Computer: w7pool-thin.DOMAIN***
Description:
An error occurred. Contact your workplace administrator for assistance.
Connection name: Darnells Remote Access
Connection URL: https://natag.-----***/RDWeb/Feed/webfeed.aspx
Error code: 0x80070005, 0x0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RemoteApp and Desktop Connections" Guid="{1B8B402D-78DC-46FB-BF71-46E64AEDF165}" />
<EventID>1000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>100</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2011-06-09T08:44:31.311646500Z" />
<EventRecordID>44</EventRecordID>
<Correlation />
<Execution ProcessID="2360" ThreadID="2852" />
<Channel>Microsoft-Windows-RemoteApp and Desktop Connections/Admin</Channel>
<Computer>w7pool-thin.DOMAIN****</Computer>
<Security UserID="S-1-5-21-1454471165-602609370-725345543-1290" />
</System>
<UserData>
<EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
<ConnectionName>Darnells Remote Access</ConnectionName>
<ConnectionURL>https://natag.----*****/RDWeb/Feed/webfeed.aspx</ConnectionURL>
<ErrorCode>2147942405</ErrorCode>
<ErrorCodeAdditional>0</ErrorCodeAdditional>
</EventXML>
</UserData>
</Event>
The RD Gateway is responding correctly as I can go to the RDWeb site log in and launch programs, I can copy a created rdp file for an application to the desktop and run that as well.
The webfeed.aspx is working correctly as I can run that on a Win7 full client in both hyper-v and a hardware one and they populate the apps as expected.
Regards,
Kane. -
Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASEHi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).
On the Iphone and Apple TV I can connect to Netflix . . . it recognizes me and my account settings . . . and I can veiw all my recent programs and show titles, descriptions, etc.. But when I select one to watch I get a message saying:
"ERROR A PROBLEM OCCURED WHILE PLAYING THIS ITEM. TRY AGAIN LATER, OR SELECT A DIFFERENT ITEM. GO TO WWW.NETFLIX.COM/SUPPORT FOR MORE INFORMATION. (139)
Netflix support say there is nothing wrong on their end . . . that it is an Apple issue. They see the request for the show, the devices are registered . . . but it shows 0 bandwidth to the device.
My Apple TV did this when I first hooked it up a couple of weeks ago. Then after a few days started working with Netflix, for no apparent change . . . now doesn't again for the past couple of days (I think that it auto restarted the other night after a virus scan).
Very frustrating, and driving me nuts! Has anyone else had and been able to resolve this problem?Troubleshooting
Apple TV2 update one day and netflix is browsing but not launching the actual content (error 139)
Ipad2 (another ios device) forces me to update netflix if I want to use it and I get the same error 139 on it.
**** now I have two not ways not working where prior to some update it was fine.
Nintendo Wii is still working ( mind you running an ancient version of netflix ) Dusted the Wii off and gave it to the kids use. Now they are happy again...
PC is also still working ( using some other flash client ) but that's just of interest, we're not going to be watching tv with that.
My wife's iphone 4s is still working. Odd.. still ios but for somereason I am not forced to update the version. So basically she could mirror stream up to the apple tv with it. Nice feature of Ios5. Later found out it is using 1.4 version of netflix. The most useful thing out of that is that all 3 of the devices are Ios and it was actually the iphone with the 1.4 version of netflix that still worked!
I heard from a friend who was on a different ISP he was still working so I took my appletv2 and ipad2 over to my brothers house who is on that same ISP as my friend and both started working. So the ISP is involved too!
Brought the appletv2 and ipad2 back to my house hoping it would maybe still work. No dice Broken again.
Searched the appstore for a decent packet analyzer and there isn't really anything. I was able to sniff the traffic with my PC and also on my juniper ssg5 confirmed that. Turns out port 80 traffic is actually failing and authorization is not happening. The other clients do not do this...
Asked a buddy from work who used to work at the ISP if he could make a call to some one who might actually know what is going on. He came back pretty quick and said yea they are trying really hard to get the beta patch in from Bluecoat asap.
So knowing that it was actually Netflix that changed when it hit 2.0 and in my case the ISP made the adjustment it's pretty safe to say this issue is going to be ongoing unless netflix changes again the way they authorize for licenses.
So that's the summary of what went right down the troubleshooting path but I'll tell what what didn't
2 calls to Netflix (useless... waste of time... they are too quick to blame anyone but themselves)
1 call to apple support (support call was going to cost more than it cost for me to change ISPs)
2 calls to ISP (through the normal means - regular support number)
So why is this intermittantly working sometimes? If you are lucky enough to authorize to an IP address that is not cached they voila you are going to get an authorization / a license to watch the show. Some people report after defribulating their appletv (reseting, rebooting, dns changes, you name it) they get it working. Over the past month we all seem to have got it working for some period of time only to lose it a day to two later.
It's now been several days since the beta patch to the bluecoat and 4 of us who have been communicating on the issue appear to be online all at the same time for those several days and that is a good sign that we might be out of the woods on the issue.
Hope this turns into something helpful for someone else out there. -
HELP! How do I get wireless internet on both my Ipad and Desktop? Have Linksys Router WRVS4400N. Only 1 device will work at 1 time. Something about a Learn MAC address? What should I do? Thanks! Tiggergirl
Good morning
Hi Kathy, my name is Johnnatan and I am part of the Small business Support community.
If you have an old firmware it would be a good idea to go out to Cisco.com and see if there is any firmware updates. I have looked on the site for you and I see the latest firmware is:2.0.2.1
http://www.cisco.com/cisco/software/release.html?mdfid=282414016&softwareid=282487380&release=2.0.1.3&rellifecycle=&relind=AVAILABLE&reltype=all
You can also try to reset your device to its factory settings, to reset your router please take a object that has a point and hold the reset button in on the back for "atleast" 30 seconds until the lights on the front to start flashing.
About Mac address, you can map a Static IP with a specific mac address, You can folllow these steps in order to configure it.
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=1272
Thanks,
I hope you find this answer useful,if it was satisfactory for you, please mark the question as Answered.
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer. -
How to stop the auto change of the desktop background picture ?
How to stop the auto change of the desktop background picture ?
Well . . thanks, but I already have done that and I still have the problem. The background changes to the standard picture galaxy not to one of the options. Sorry my question wasn't clear enough.
Thanks. -
Can't get mobile device to auto configure the active sync server
Hello
I am trying to get my costumer mobile devices to auto configure the active sync server name so they don't have to type it in. I believe I have everything in place Certificates are fine. I populated the external url on the active sync
object in Exchange.
DNS is set up correct. I ran the Exchange Connectivity Analyzer and it runs perfectly. The only test step if fails on is the first attempt to contact the autodiscover service using just the domain name and that is because we have a
record in DNS so our domain name points to our public web server but all the other tests run fine. At the end, it even displays the xml file contents and shows me the external url of the active sync object.
I get a successful run but it first shows SSL certifiate of our public Web site and then hangs on the server config and then prompts me to enter in the server name and domain. My external url in Exchange looks like this:
https://remote.domain.com/Microsoft-Server-ActiveSync
Any Help??
EddieThank you for replaying but there is already internal A record that points to Exchange server. Firewall, DNS external and internal are setup like this:
Firewall:
Port 443 and 25 points to Internal IP of our Exchange 2013 (only mail server in company).
Port 80 not open.
External DNS records:
autodiscover.mydomain.com à points to our WAN IP
remote.mydomain.com à points to our WAN IP
mydomain.com à points to external online webhosting
Internal DNS records:
autodiscover.mydomain.com à points to ours Exchange 2013 internal IP
Remote.mydomain.com à points to ours Exchange 2013 internal IP
mydomain.com à points to external online webhosting
Test form "ExchangeConnectivityTest.com" is Successful but with warnings.
Warnings are about https://mydomain.com/AutoDiscover/AutoDiscover.XML
because
https://mydomain.com is
pointing to website, which is hosted externally.
Eddie -
Unable to see Remote App and Desktop Connection in Group Policy Management Editor
I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Configuring ssid and vlans on autonomous access point ?
here is an a demonstration of how to configure vlans and ssid on a auto-ap , what i dont understand is when i configure the ssid under (interface dot11radio0) and the vlan under that command , why do i need to configure sub-interfaces for the "fastethernet" and the "dot11radio0" if i already configured it under the "interface dot11radio0" , why do i need the "encapsulation dotq x" ? and what is bridge-group ?
If you want to use multiple SSID with multiple vlan, then you have to configure subinterfaces on Radio interfaces (in both Radio 0 & Radio 1 if you want to use both 2.4GHz & 5GHz band) & Ethernet interfaces.
AP simply bridge wireless traffic to wired interface using these sub-interfaces. To specify which radio sub-interface traffic to map to ethernet sub-interface, a Bridge-Group number (1-255) is used.
Bridge-Group 1 always used for native vlan traffic & usually used for AP management.
HTH
Rasika
**** Pls rate all useful responses **** -
Configuring tomcat and apache on the same system
i need to configure tomcat and apache on the same system.
first i have configured apache and it is working well.
Next is have configured tomcat and it is working well.
i need to interlink tomcat and apache. so i downloaded jk connector and i have configured it.
i gave an entry in the httpd.conf as
Include /tomcat/conf/auto/mod_jk.conf
i have copied the file mod_jk.so to /usr/local/apache/libexec/
went i start apache after the entry is given it gives the error like this
cannot load /usr/local/apache/libexec/mod_jk.so into server: ld_so.1. /usr/local/apache/bin/httpd: fatal : libgcc_s.so.1 : openfailed : no such file or directory in linux
please help to configure this.
i have done every thing as it is in apache.org documentation. please give the complete configuration. some say that tomcat is not compiled according to apache1.3. but i configure jk connector as --with-apxs=/usr/local/apache/bin/apxs
send me the reply
thankqs in advanceHi,
I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
Anand -
Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID: 49
INFO:iMPACT - Vendor ID: 01
INFO:iMPACT - Device Code: 18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time = 814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank youHi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the same configuration problem, I want to consult you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
Maybe you are looking for
-
How can I run 2 keynote presentations on 2 different macs with only one keyboard?
How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long confe
-
Using Multiple Object Types in a FIM Managed Criteria Distribution Group
Is it possible to use multiple object types in a criteria based distribution group. So when building your criteria filter, "Select (object type) that match (all/any) of the following condiftions". Currently you can only choose 1 object type and I wan
-
How do I move an imageicon from one side of a jpanel to opposite side
Hi, I have a probelm on drag and drop imageicons on the same JPanel. At the moment I can place imageicons on the JPanel. How can detect mouse events on a specific imageicon on the jpanel?
-
My Ipod is disable how can I open it
my ipod touch is disable how can I open it
-
Why i can not use whatsapp in ipad with cellular
i want to use whatsapp in ipad mini cellular, any body can help me