Auto correct still correcting after disabling it globally, any ideas?

I disabled "Correct spelling automatically" in system preferences > Keyboard > Text but it didnt work. Text continues to be corrected when I type. Any ideas?
Thanks!

I had turned off auto-correct in the keyboard preferences, but in Mail all my spelling and grammer choices were grayed out.  The key for me — as Kingoftypos points out — was "For Mail, open a new message/reply/forward. Then go to the Edit menu and scroll down to the Spelling/Grammar."
It would never have occurred to me to open a new message to be able to change the settings.
Thanks, King

Similar Messages

  • Does GPU acceleration in Illustrator CC still work after disabling 'GPU Preview' and enabling 'CPU Preview' (on a workstation gpu)?

    I'm using a workstation graphics card that allows for GPU acceleration in Illustrator CC.
    Selecting 'GPU Preview' instead of 'CPU Preview' under the 'View' toolbar in Illustrator CC results in a more choppy experience.
    Which leads me to wonder:
    Does GPU acceleration in Illustrator CC still work after disabling 'GPU Preview' and enabling 'CPU Preview' (on a workstation gpu)?
    Does GPU acceleration for my gpu actually improve the performance for my work?

    If you disable the GPU acceleration in preferences then you'll be unable to enable GPU preview under the view menu. It will automatically go into CPU preview as the GPU is no longer enabled.
    If you're experiencing choppy performance when you do have the GPU preview selected, something is amiss because any GPU that can support GPU acceleration should be able to do it without a performance hit.
    What is the video card that's in the workstation?

  • My Itunes was working fine on my computer.  It would not open so I re-installed it.  It says it installed correctly but it still will not open...any ideas?

    My ITunes was working fine on my computer (Windows 7).  It would not open so I re-installed it.  It still will not open...any ideas?  Thank you

    I'm am assuming you are using a windows PC. If so these steps may help you tremendously. Step 5 is usually the culprit.
    http://support.apple.com/kb/ts1538

  • After downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    after downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Imessage only displays the phone number instead of the name after the last update. any idea how to fix it?

    imessage only displays the phone number instead of the name after the last update. any idea how to fix it? All messages had the names displaying correctly before the last update.

    From the menu bar, select
     ▹ System Preferences... ▹ Language & Region
    From the Region menu in the window, select one of the preset regions. If one is already selected, choose a different one, then change it back. Close the preference pane and test.

  • HT201272 Help - have an iTunes account on iPad for well over a year. Just bought iPhone 5 and I cannot purchase apps using my account. I am asked to verify my credit card and details but then it rejects them. They are still fine on the iPad. Any ideas?

    Help - have an iTunes account on iPad for well over a year. Just bought iPhone 5 and I cannot purchase apps using my account. I am asked to verify my credit card and details but then it rejects them. They are still fine on the iPad. Any ideas?
    I tried to contact support but they do not recognise my Thai phone number.
    the Thai support site is all in Thai (and I neither read or write it).
    All I want is a single email address that works - it must be quite a simple process.
    I don't want to create another account with another credit card - life will just get seriously complicated then.
    BTW my apple I'd is accepted for downloading free apps!!!

    First of all, you should always save you photos on computer like any other digital camera.
    Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
    Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
    What computer do you have?

  • TS1389 I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Pa

    I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Paul

    Sounds like you have a "damaged track" or "damaged file".
    This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
    My situation: I bought the album today for my Mac,  MacBook Pro, iPad 2, and iPhone 4S devices.
    Issue: One song (only on my MacBook Pro) would not play, instead display "
    EX: left"
    Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
    2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
    3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
    4. Check your Music Library for your song (Should download inside the associated album) and hit play.
    EX: (Song I purchased that wouldn't play because of authorization, playing)
    Enjoy!

  • My iPad is locked on Apple logo. Already made a restore still have only Apple logo. Any ideas?

    My iPad is locked on Apple logo. Already made a restore still have only Apple logo. Any ideas?

    Try a Restore but force the iPad into Recovery Mode first.
    Doing that involves restarting the iPad, holding the Home Button, and connecting it to iTunes.  Holding the Home Button is the trick.  Here's an article explaining how to do it.
    http://support.apple.com/kb/HT1808
    If Force Restarting and Force Restoring doesn't work, it may be time to look up warranty information.
    Good Luck.

  • I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". Ihave re-installed but still receive the same message. Any ideas please.

    I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". I have re-installed but still receive the same message. Any ideas please.

    Make sure your user account has full administrative permissions.  Then, at this stage of the game, I would take the following steps:
    - Re-create the Preferences file following these instructions:
    Re-create the Photoshop Elements preferences file to eliminate problems that a damaged preferences file might cause.
    Note: When you use this solution, Photoshop Elements will create a new preferences file and you will lose custom settings associated with your current preferences file. However, the file you rename in step 2 is your original preferences file. If you determine that the preferences file is not causing the problem, then you can restore your custom settings by undoing the instructions below.
    To re-create the Photoshop Elements preferences file:
    Quit Photoshop Elements.
    Locate the Adobe Photoshop Elements preferences files. In Photoshop Elements 5.0, there are two preferences files, one for Organizer and one for Editor:
    Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Organizer\psa.prf
    Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Editor\Photoshop Elements 5 Prefs.psp
    Rename the extension for the files (for example, to psa.old).
    Start Photoshop Elements. Photoshop Elements creates a new preferences file.
    I doubt that this will fix your problem, however, it is always the first thing to try.  If it does not, take these steps:
    - Uninstall Photoshop Elements
    - Run the Windows Installer CleanUp Utility (http://support.microsoft.com/kb/290301)
    - Reinstall Elements
    - Reinstall the 5.0.2 patch
    Good luck,
    Juergen

  • New computer, download premiere and there is no playback after importing files.  Any ideas what's happening?

    New computer, download premiere and there is no playback after importing files.  Any ideas what's happening?

    'JohnTSmith' Thanks for the links.  I'll be sure to add more details for future requests!
    The computer is an iMac late 2013
    Processor  3.2 GHz Intel Core i5
    Memory  8 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 755M 1024 MB
    The video file was a .mov file from a Canon 7D.  Essentially I downloaded Adobe Premiere CC 2014, downloaded the update because I tried to open up an older project and then imported one movie file. 
    Playback from all windows didn't work.  But after I tried to change settings in the preferences as 'RoninEdits' suggested but I ended up just searching around and didn't change anything.  I stepped away for a second to check on my cookies in the oven and when I came back press play and the video now works.  Any idea what happen? 
    I'm not sure what happen but I'll continue monitoring this issue.  I'll touch base if I run into the problem again. 
    Thanks for the help everyone. 

  • I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

    I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

    I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

  • I cannot get my sons iPod touch to unlock. He has forgot his password and I have not synced his iPod to my new computer. I put it in recovery mode but it is still asking for his password. Any idea what to do next???

    I cannot get my sons iPod touch to unlock. He has forgot his password and I have not synced his iPod to my new computer. I put it in recovery mode but it is still asking for his password. Any idea what to do next???

    Try DFU mode instead.
    http://www.iclarified.com/entry/index.php?enid=1034
    B-rock

  • My daughters iPhone is frozen with the apple showing on the screen.  We have turned it on and off but it is still stuck on that screen.  Any ideas why or how to correct this?

    My daughters iphone4 is frozen to a blank screen with the apple on it.  We have turned it on and off and it still remains on this screen.  We cannot access gef phone at all.  Any idea why this is happening or how to correct?

    connect it to the computer/itunes you normally do.

  • CONTAINS clause still works after disabling fulltext index on a table

    I disabled the fulltext index on a table using the below query:
    USE <dbname>;
    GO
    ALTER FULLTEXT INDEX ON <table_name> DISABLE
    Per BOL, "The table will not support full-text queries while the index is disabled.", I would expect the CONTAINS clause to stop working but I can still return rows from the <table_name> as before.
    SELECT top 10 * 
      FROM [dbo].[table_name]
      WHERE CONTAINS(<column>, N'test');
    The above returns 10 rows before and after disabling the index.
    Do i need to do something else?
    I even tried DENY permissions:
    DENY CONTROL, TAKE OWNERSHIP, ALTER, REFERENCES, VIEW DEFINITION ON FULLTEXT CATALOG::<catalog_name>
    TO <some_database_roles including public>
    Please help.
    Thanks
    Thanks

    Charles,
    Do you have any DDL Triggers on your server that might affect whether the full text index could be disabled?
    Any Policies that might likewise affect your results?
    RLF

  • Help, just had my iphone 3 but can't connect to wifi put in the correct password but won't accept it, any ideas??

    Help, just had my iphone 3 but can't connect to wifi, i get as far as the password put in the correct password but it won't accept it, any ideas?? Thanks

    What type of encryption are you using with your wireless network -WEP or WPA?
    If your wireless router supports both which it should unless it is quite old and you are using WEP, try switching to WPA which is much more secure than WEP which is important if you have a Windows PC or any Windows based device connected to your network.
    In addition, when was the last time you checked Netgear's website to see if there is a firmware update available for your wireless router model that you haven't installed?

Maybe you are looking for