Auto create audio tracks in cycle record Logic X without take folder

Is this at all possible?
For audio not midi and I don't wan't to replace the audio each time,I would like to cycle record Audio takes and have Logic create a new track every time it loops-Like it was back in the day I think on Logic 7-without packing into a take folder.
I know it might just take getting used to but I cannot stand take folders
Please let me know if this is possible!
Thanks in advance
J:-)

Logic does have multi channel record ability, you just record arm the multiple instrument or midi tracks you want, and it'll play/record what ever is armed.
On the record till end of cycle and then move to a new track, I hear you, but you can't do it, logic used to make a new track at the end of a cycle when recording, but nowadays it sticks everything in a stupid take folder and there's no way ( that I've found ) of turning it off. Take folders have their uses, but not for every application.
I can't believe that Apple have have built a loop recorder that'll let you build up multiple parts ( like you're suggesting ) into Mainstage yet they haven't built this into logic. Maybe they will in the future, who knows. I hope so.
So yeah Christian if you want to build up loops as a performance, it's all there in Mainstage. It's called loopback by the way
There's a demo of it here (under live performance)
http://www.apple.com/uk/logicstudio/whats-new/

Similar Messages

  • Auto Create Tracks in Cycle Record in LP8?

    I might be alone but used Auto Create Tracks in Cycle Record a lot in Logic 7. I sat down today to down some work and cant find the equivalent in LP 8 any where.
    I use this to play a record a track then record again whilst listening to the original. Sometimes this will end up being as many as 8 tracks playing at the same time whilst another is being recorded.
    Can this be done in LP8?
    Sorry if this info is else where I have just spent a few hrs looking through the manual and this forum
    My best
    Joff

    Why do you post this twice, you won't get different answers by posting it again......

  • Auto Create Track in Cycle Record NOT disengaging??

    I was using Auto Create Track in Cycle Record, in the song settings recording menu, for multiple audio voice overs. Now that I want to record without this function, it is not deactivating when I disengage the selection in the song settings recordings menu.
    Is there something I'm forgetting to do here? I'm 99% positive that the only way to engage this function was from the song settings recording menu.
    If I record without Cycle engaged, the recording will stay on the one track selected. If i turn Cycle back on without Auto Create Track in Cycle Record activated, it reacts as though it was engaged. ???
    Please help, in a bind.
    Thanks!

    Can someone help me please? is it a bug? or is it some sort of setting combination I need to discover.

  • Audio track will not record - picture is fine PE9

    PE9 audio track will not record. Tried in several projects - audio gets through to computer - but the audio is not being recorded. Help please.

    Hi ATR
    Was transferring a client's DVD-R into my Adobe PE9 to do some editing requested by client.
    The audio from the DVD was coming through clearly on my computer speakers but when I finished tranferring I stopped recording and discovered the video track was fine but there was no audio track.
    Tried recording said DVD into some of my other files on PE9 but same thing.
    Since posting my cry for help I uninstalled PE9 and reinstalled it.
    This appears to have fixed the problem as I am now transferring client's DVD-R once again.
    A quick check after a few minutes revealed the audio track is now being recorded with no problems!
    Thanks for your interest.
    Kind regards
    David

  • Creating audio tracks in logic 8.

    Hi,
    Having used logic 8 for about half a year now I have had no problems whatsoever.
    However, about a week ago, when creating new audio tracks this happens.
    I create 2 tracks for example
    Audio track 1 works as normal and below the level meter at the bottom left I see the symbol to change from mono to stereo. I select it as mono.
    Audio track 2 looks normal at first but has no symbol at the bottom of the meter to select mono/stereo...
    I cannot do anything with this track. If I selected Audio track 1 as stereo. Audio track 2 comes up with the message:
    Audio 2
    Controlled by stereo object "Audio 1-2"
    I want it to go back to normal so I can record on every track! What is going on?!
    There is probably quite a simple fix for this... I just can't seem to work it out.
    Many thanks,
    J
    x

    jlowho wrote:
    Hi,
    Having used logic 8 for about half a year now I have had no problems whatsoever.
    However, about a week ago, when creating new audio tracks this happens.
    I create 2 tracks for example
    How? This should work:
    Of course you need the command New... from the Local arrange menu Tracks. It sounds like you've used *New with Duplicate Setting* instead.
    However, you can reassign tracks by ctrl-clicking on the track header:
    Audio track 1 works as normal and below the level meter at the bottom left I see the symbol to change from mono to stereo. I select it as mono.
    Audio track 2 looks normal at first but has no symbol at the bottom of the meter to select mono/stereo...
    I cannot do anything with this track. If I selected Audio track 1 as stereo. Audio track 2 comes up with the message:
    Audio 2
    Controlled by stereo object "Audio 1-2"
    I want it to go back to normal so I can record on every track! What is going on?!
    You have two channel strips assigned to one track... reassign it, or just delete the 'slave' and create a fresh one. Again, it looks like you (or Logic) have used the *New with Duplicate Setting* command somehow.
    regards, Erik.

  • Logic pro 9,record ready has gone for audio tracks,can't record now.

    I upgraded from Logic 8 to logic pro 9 back in october,everything was fine no probs.I have come back to record after a month away & now there is no record ready for audio tracks on any page,they're there for instruments & midi tracks.All else seems fine - just can't record! Also is there any way of getting help from apple,can't see anywhere to contact them without paying!! can anyone help with this?,tis the season of frustration....

    You have to select an Input device in the Audio preferences. Since Logic 9 you can assign different devices for In- and Output. So make a selection there and everything will be fine.

  • Number of audio tracks possible? in logic

    im trying to determine the number of possible audio tracks in logic....in my pulldown menue, there are only 24 possible...i imagine i can set this to a higher number?? any suggestions?
    thanks

    I think what you are looking for is in the Arrange window, Track->Create Multiple->Track Type: Audio. This should allow you to access the unlisted tracks from the Arrange view. Just add however many you need.

  • Soloed Audio Tracks Won't Play Logic 9.1.8 - Background Still Does

    I have a 59 track session in Logic 9.1.8. I've encountered a very odd problem. Multiple audio tracks, even when soloed, will not play; however background audio/other tracks still do. For instance, I've imported a rough vocal track to the mix and when I solo the track, I do not the vocals however I hear kick drum and piano tracks which have been muted. I have double checked every audio track's output, automation, etc…and read several other posts to try and find anyone with a similar issue, to no avail.
    Some specs - the majority of the tracks are imported Audio, I have attempted to solve the issue from my MacBook Pro (2013) AND from my studio system. All of the audio and session information are stored on our dropbox server, however other projects still work fine.
    Here's where it gets super weird - I even tried started the session over again and just importing in the audio tracks from scratch and there is STILL a problem - I imported 5 of the drum tracks - kick, hat, snare, taiko, and noise percussion. When I solo the taiko track, I hear the audio from the kick track and NO AUDIO from the taiko track, and this is a BRAND NEW SESSION.
    Someone PLEASE HELP.

    In Logic's preferences/Audio... Is Universal Track Mode enabled?  It should be.

  • Audio tracks have no record symbol

    When I select an audio track to record, there is no r symbol.This has never happened before.

    There are some issues with Audio Hijack app. After updated it, some problems related with Audio System Preferences have gone.
    Kuso

  • How can I export an audio track with just the effect signal without the audio?

    I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
    I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

    I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
    Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience. 

  • Audio tracks hissing when record enable is engaged

    Hi guys. I am having a big problem with hissing when record enable is engaged. I've discovered that when I click off software monitoring the hiss goes. But then I cant add effects like reverb for singers who want to record with reverb whilst they're recording. It shouldn't be the case, but any enlightenment and I would be grateful. Thanks.

    There are some issues with Audio Hijack app. After updated it, some problems related with Audio System Preferences have gone.
    Kuso

  • Slowing down an audio track like a record

    Is there any way to edit a music track to graqdually slow it down like a vinyl record slowing down to a stop?   Finding a sound effect like that is not as easy as I thought it would be.
    Thanks!

    Eh.   Segmenting wouldn't be a very smooth sound.   I did think of that.  However, since this clip only needs to be something like 3 seconds, it's kinda impractical.  
    I was hping not have to get into a new program just for a brief effect, but I may have to.
    I went over the freesound.org, where I thought, "Surely, there's an effect here", but srprisingly, there is not.  But they did have a couple of solutions on their forum, so I'll probalbyl give them a try.
    http://www.kvraudio.com/product/tapestop_by_tbt
    http://www.kvraudio.com/product/tapebrake-by-wok
    http://www.kvraudio.com/product/scratch-it-by-z3-audiolabs

  • Logic pro 10 - recording a midi instrument as an audio track

    In my Logic 10 song I have a midi instrument that I want to record as an audio track. I can find no way to get the signal from the output of the "harmonica" track to the input of the audio track, apart from recording it using the external speakers. It must be simple to do, but Apple help is no help. Can somebody please help?

    Use "Bounce Track in Place".
    http://help.apple.com/logicpro/mac/10/#lgcp8aa3b784

  • Auto create track BUG

    try this:
    In 'file > song settings' choose 'auto create track in cycle record'
    With each repetition of the cycle a new track is created.
    Record something two or more cycles long...
    Now UNDO.
    the Regions of every track that's underneath the track you recorded on are all
    moved up to the tracks above.
    So now that you did the undo, your drum regions are on the bass track for example.
    big bug.

    yes, HORRIBLE!

  • No audio output on record enabled audio track

    Hi guys,
    Not sure whether anyone else has encountered this issue with Logic X. When recording using an audio track once the record enable button is selected I am able to see input but the input doesnt go to any output so I am unable to monitor what I want to record. Once I record I am able to hear what I have recorded on playback. The issue has nothing to do with my audio interface as it does the same thing with the built in audio and output.
    This problem doesnt exist when using audio instruments and it seem to have just started randomly.
    Please help!
    System spec
    OSX 10.8.5
    Procesor: 3.4 GHz intel Core i7
    Memory 32 GB
    Logic 10.03
    Audio Interface: M-audio  project Mix

    I think this might help the discussion. I also have auto input monitoring selected. I can also hear the audio when I click the input monitoring button.

Maybe you are looking for