Auto creation of Batch master data when external batch no entered in PR

Dear All,
At persent we can auto create batches at production order creation level, Goods receipt level.
In same way how we can achive auto creation of Batch master data at Purchase Requisition level.
Regards,
Manoj

There is no auto-creation of batches that are entered in ME51N. SAP issues message ME178 telling you that the batch entered does not exist.
You have to maintain the batch in MSC1N first, then you can enter it in the PR.

Similar Messages

Error during create CR for MDGC "Enter a relevant role for creation of customer master data"

Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,

Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks

Problems with HowTo "Creation of BI Master Data in Integrated Planning...)

Hi,
one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
Does anyone of you know this guide and was able to build a working solution?
I have different questions, maybe you could help me:
- what kind of variable is he using?
- do I need a DataProvider in Web Template?
- how do I get the connection to the used variable in the button group?
Thanks for your help.
Regards
Tim

Hi Timo,
you require two howtos to implement the solution.
First, please take a look at the first document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
And after this please implement the solution from the how to.
Furthermore you can take a look at this how to, which might help you too:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
Hope this helps.
Regards
Tim

Creation of Tech Master data with CRM IC Web Client

Hi Experts,
I have a query regarding creation of Technical master data via CRM IC Web client ( CRM7.0 & ECC6 for ISU)
1) If we are using CRM IC web Client then , how the creation of Technical Master Data is triggered from web client ?
2) Where the technical master data created first ISU or CRM ?
If anyone has the info on this please let me know.
regards,
Sagar

Hi Sagar Arvind Phirke,
1) You need to configure CRM Middleware to exchange data between CRM and IS-U;
2) Data is created first in CRM, then it's replicated to IS-U.
Check this helpful documentation: http://help.sap.com/saphelp_crm70/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm
Best Regards,
Pedro Nunes

Controlling batch production date when using PI sheets

Hello,
The batch production date for some products is first entered at process order release. However, the GR is done using PI sheets. The GR entry via PI sheets takes the current date as the manufactured date and overwrites the old batch production date in the batch
Does anyone out there know if there is a way to control this so that old production date is not overwritten with the GR entry date?
many thanks.

Dear,
For this you need to use the setting..Batch classification in foreground for the movement type. Do the setting in OMJJ.
Coem back after you try.

I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine". I need the back up data that I could access on my old mac book pro (that is now broken). Tnx so much

I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine". I need the back up data that I could access on my old mac book pro (that is now broken). I can only access time machine back up data that I've obtained since starting the new mac book pro. Tnx so much

Try doing a click-and-hold on the Time Machine icon in the Dock, then select "Browse Other Time Machine Disks".
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Creation of Customer Master Data

Hi
I have problem with Customer Number range, Created external number Range for customers With number interval
'SA1 to SA10000000' ,Then when i am creating customer master data it is accepting only some number like SA1, SA10, SA100, SA1000 .... like this .
My problem is why it is not accepting all the numbers like SA1, SA2, SA3, SA4.............. SO ON any body please help me
Thanks in advance,
Regards
Prabhakar

Hi, because SA2 is out of this range! SAP checks available rang according with sorting. If you take value SA1,SA10000000,SA2 and sort it:
SA1
SA10000000
SA2
So it's out of range

Creation of asset master data

hi sap gurus,
i have a problem regarding saving of asset master data.
while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
you cannot save the asset(correct depreciation error)
Diagnosis: you have choosen the function save.the system found an
internal problem when calculating depreciation for a check document.
sys responce:The asset cannot be created
procedure:1 check the error from depreciation calculation by
performing the function "Test doc.'again.
2 if you cannot correct the error ,contact your sys specialist.you
must then cancel your current processing.
please help me regarding the problem......

hi
check your depreciation area settings for the asset class

IC Web Client ,(CRM 7.0) creation of Tech Master Data for IS Utilities

Hi Experts,
We have created & assigne d (UTIL_IC_REG) Business Role in our project.
When I check the Technical Data option , it allows me to create ( Connection Object ,Premise & POD )
My question is how these objects are created.
Is these object first created in CRM & then replicated to ISU or it directly creates in ISU & then replicated to CRM.
Our requirement is to create Tech Master data in ISU & then replicate to CRM for Conn Object & POD.
Can anyone please guide me in this scenario

Hi Sagar,
Yes, ISU should be your system of reference. You replicate the objects to CRM.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

Need to export customer master data in a batch input file

Hello all,
I'm searching for a solution to export customer master data out of a R/3 system (Release 470).
The challenge is that the file must have the same structure like the file for batch input of customer master data (import file of the program RFBIDE00).
So, has anybody an idea, if there is a standard tool to get such a file? Or has anybody developed a report creating this structure by his own?
Thanks for your help,
kind regards,
Dietmar

Hi,
I have also come across the same problem as above. There is a standard program RFBIDET0 which has to be customized to get the file which can be uploaded to RFBIDE00. Do anybody come across this kind of problem before and have a program already. It will be of great help, if you can forward the program or guide.
Regards,
Vishnu Priya

Integrate HR OM master data to external system HRMD_A / HRMD_B / HRMD_ABA ?

Hi,
I would like to setup hr master data distribution using PI to external non SAP system. after i have searched from the document there are 3 idoc HRMD_A, HRMD_ABA and HRMD_B. Please advise which message type more suitable for my scenario ?
Thank you and Best regards
Fernand

Hi,
The difference is in the segments that each one includes, you can check it in transaction WE30 for example for
the IDOC Type HRMD_A07 (which is linked to HRMD_A)vs. the IDOC type HRMD_ABA05 (which is linked to HRMD_ABA)
The first one manages more record, therefore you can send more infotypes. This is because its manages all the standard OM information.
The HRMD_ABA is more used if your destinatio is a CRM or SRM system which requires less data.
Regards,

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

Why would my cube show the wrong master data when it is correct in the MD

I have an odd situation. When I go to display company code, which I have set up as an attribute of cost center, it displays the wrong value. However when I go to cost coetner and look at the company code it is right there. We tried re-loading the master data and that didn't help. I don't wnat to reload the cube if possible. Also racn checks on the cube and master data an no errors occurred? Is there a way to see if the wrong SID is attached?
thanks

Please run the program RSDMD_CHECKPRG_ALL for your master data object.
-Vikram

Creation of Assets master Data

Dear All,
Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ? In UNBW mat type there is no sales views maintained.
pls exp me
regds,
Channa

hi,
Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
Regards
Priyanka.P

Creation of Vendor Master Data

Hi,
In my company they are currently using this process to create Vendor Master Data: The Vendor Master Data is created in the Production Server and refreshed to Development Server and to Quality Server, using ALE.
Is this the right process? If not can you let me know the steps to create Vendor Master Data.
regards,
raj

Hi Raj,
ALE and IDoc is the best way to transfer master data between SAP system. They have excellent error handling and reprocessing capabilities (Recommended by SAP).
In order to automate the vendor master data transfer, you need to do the following steps.
1. Create Logical System (if not available) for PROD, QA and DEV system.
2. Create RFC Destination (SM59) from PROD to QA and DEV system.
3. Create Distribution Model from PROD to QA/DEV (BD64) for message type CREMAS (Vendor Master).
4. Create Partner Profile (WE20) for message type CREMAS in PROD, QA and DEV system.
5. Execute transaction code BD14 (Send Vendor) from PROD to QA and DEV system.
6. To monitor the IDoc, you can use transaction code WE02.
If you are not familiar with ALE/IDoc setup, please work with technical folk.
Hope this will help and give an idea.
Regards,
Ferry Lianto

Auto creation of Batch master data when external batch no entered in PR

Similar Messages

Maybe you are looking for